Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Dielectronic recombination rates, ionization equilibrium, and radiative emission rates for Mn ions in low-density high-temperature plasmas

The analysis of optically-thin far-ultraviolet and X-ray emission lines of multiply-charged ions is one of the basic methods for determining the temperatures and densities of laboratory and astrophysical plasmas. In addition, the energy balance in these plasmas can be significantly influenced by the emission of radiation from relatively low concentrations of multiple-charged atomic ions. Because the populations of the excited levels are expected to depart substantially from their local thermodynamic equilibrium values a detailed treatment of the elementary collisional and radiative processes must be employed in order to predict the emission line intensities. In this investigation the authors present the results of calculations based on a corona equilibrium model in which a detailed evaluation is made of the dielectronic recombination rate coefficients. The ionization and autoionization following inner-shell electron excitation from each ground state are balanced by direct radiative and dielectronic recombination. The spectral line intensities emitted by the low-lying excited states, which are assumed to undergo spontaneous radiative decay in times that are short compared with the collision time, are evaluated in terms of the corona ionization equilibrium distributions of the ground states and their electron-impact excitation states.

Jacobs, V. L.↗

Thermoelectric and morphological effects of Peltier pulsing on directional solidification of eutectic Bi-Mn

Extensive in situ thermal measurements using Peltier Interface Demarcation (PID) during directional solidification of eutectic Bi/MnBi were carried out. Observations indicate that significant thermal transients occur throughout the sample as a result of the Peltier pulsing. The contributions of the Peltier, Thomson, and Joule heats were separated and studied as a function of pulse intensity and polarity. The Joule and the combined Peltier and Thomson thermal contributions were determined as a function of time during and after the current pulses, close to the solid/liquid interface. Variations of the Bi/MnBi particle morphology clearly reveal the interface shape, changes in interface velocity, meltback, and temporary loss of cooperative growth, as a result of the pulsing.

Silberstein, R. P.↗

Effect of applied magnetic fields during directional solidification of eutectic Bi-Mn

Samples of rod eutectics Bi/MnBi were directionally solidified in a growth-up Bridgman-Stockbarger configuration in the presence of a transverse magnetic field up to 3 kg to determine whether gravity-driven convective effects could be reduced or eliminated. The experiments were carried out over a range of furnace velocities, V, of 0.2 to 50 cm per hour with a thermal gradient at the liquid-solid interface of 100 C/cm and 150 C/cm. Morphological, thermal and magnetic analyses were carried out on samples grown with and without an applied magnetic field. For samples grown at V greater than 3 cm per hour in a transverse magnetic field, reduced mean rod diameter and interrod spacing occurred as well as undercooling and increased coercive strength. The data agreed with that obtained for low-g growth at 50 cm per hour and 30 cm per hour.

Decarlo, J. L.↗

Fe-Mg-Mn relations of ureilite olivines and pyroxenes and the genesis of ureilites

Microprobe analyses of ureilite and pigeonite cores are studied. The Fe/Mn-Fe/Mg relationship in the olivine core is examined. It is observed that magnetic processs such as fractional crystallization and partial melting, and FeO reduction contribute to the olivine core composition. The study of the Mg/Mn and Fe/Mn distributions reveals that these two distributions are not in equilibrium in the olivine and pigeonite cores. The effect of a reducing agent, carbon, on the ureilite genesis is investigated. It is concluded that fractional crystallization and FeO reduction are the major processes of ureilite genesis.

Mittlefehldt, D. W.↗

A multiplet table for Mn I (Adelman, Svatek, Van Winkler, Warren 1989): Documentation for the machine-readable version

The machine-readable version of the multiplet table, as it is currently being distributed from the Astronomical Data Center, is described. The computerized version of the table contains data on excitation potentials, J values, multiplet terms, intensities of the transitions, and multiplet numbers. Files ordered by multiplet and by wavelength are included in the distributed version.

Warren, Wayne H., Jr.↗

Preliminary results of Mn partitioning experiments on Murchison analogues

Eucrites, howardites, and diogenites have Fe/Mn ratios between 30 and 45, while carbonaceous chondrites have much higher values between 90 and 150. Stolper (1977) first showed that basaltic achondrites could evolve from a precursor chondritic material through simple partial melting. These experiments indicated that chondritic material heated to temperatures near 1180 C with a fugacity of one log unit below the iron-wustite buffer curve, produced a eucritic mineralogy that contained olivine, pigeonite, plagioclase, spinel, glass, and metal. The partial melting experiments of Jurewicz et al. (1992) on an hydrous Murchison and Allende also showed that HED compositions were produceable at temperatures between 1130 C and 1325 C with fugacities below and above the iron-wustite buffer curve. However, the MnO abundances of Jurewicz were too low to produce suitable Fe/Mn ratios for HED's. We present below our results of partial melting experiments on Murchison analogues that involved temperatures between 1180 C and 1580 C and fugacities below the iron-wustite buffer curve. Our experiments resulted in MnO abundances nearly twice that of Jurewicz and indicate that the production of basaltic achondrite-like Fe/Mn ratios from precursor chondritic material are possible.

Boesenberg, Joseph S.↗

Cr, Mn, and Ca distributions for olivine in angritic systems: Constraints on the origins of Cr-rich and Ca-poor core olivine in angrite LEW87051

Angrite meteorites are a type of basaltic achondrites that are noted for their very old cyrstallization ages (4.55 b.y.) and unusual chemical and mineralogical properties. In spite of great interest, only four angrites have been found. LEW87051 is the smallest one which weighs 0.6 g. It is a porphyritic rock with coarse subhedral to euhedral olivines set in a fine-grained groundmass which clearly represents a crystallized melt. The largest uncertainty about the petrogenesis of LEW87051 is the relationship between the large olivine crystals and the groundmass. Prinz et al. suggests that olivines are xenocrysts, while McKay et al. proposed a fractional cyrstallization model based on experimental studies. However, the crystals have Cr-rich and Ca-poor cores which do not match experimental olivines. Although Jurewicz and McKay tried to explaine the zoning of the rim by diffusion, some features are not explained. There also exists a definite composition boundary of Fe(2+) and MnO between the core and the rim. To clarify the origin of these olivines, we have performed experiments using LEW87051 analogs to measure the effects of oxygen fugacity on distribution coefficients of various elements in an angritic system.

Mikouchi, T.↗

The Mn-53-Cr-53 System in CAIs: An Update

High precision techniques have been developed for the measurement of Cr isotopes on the Triton mass spectrometer, at JPL. It is clear that multiple Faraday cup, simultaneous ion collection may reduce the uncertainty of isotope ratios relative to single Faraday cup ion collection, by the elimination of uncertainties from ion beam instabilities (since ion beam intensities for single cup collection are interpolated in time to calculate isotope ratios), and due to a greatly increased data collection duty cycle, for simultaneous ion collection. Efforts to measure Cr by simultaneous ion collection have not been successful in the past. Determinations on Cr-50-54Cr, by simultaneous ion collection on the Finnigan/ MAT 262 instrument at Caltech, resulted in large variations in extrinsic precision, for normal Cr, of up to 1% in Cr-53/Cr-52 (data corrected for mass fractionation, using Cr-50/Cr-52).

Papanastassiou, D. A.↗

Strain Effects on the Structural and Magnetic Properties of La- Ca-Mn-O Epitaxial Films

La0.7Ca0.3MnO3 (a = 3.86 angstroms) epitaxial thin films have been grown on SrTiO3 (a = 3.905 angstroms), LaAlO3 (a = 3.79 angstroms), and YAlO3 (a/square root of 2 = 3.66 angstroms, b/square root of 2 = 3.77 angstroms) substrates. The films were analyzed with x-ray diffraction, x-ray photoemission spectroscopy, dc and ac resistivity, and dc magnetization.

epitaxial films lanthanum↗

How Deep and Hot was Earth's Magma Ocean? Combined Experimental Datasets for the Metal-silicate Partitioning of 11 Siderophile Elements - Ni, Co, Mo, W, P, Mn, V, Cr, Ga, Cu and Pd

Since approximately 1990 high pressure and temperature (PT) experiments on metal-silicate systems have showed that partition coefficients (D) for siderophile (iron-loving) elements are much different than those measured at low PT conditions. The high PT data have been used to argue for a magma ocean during growth of the early Earth. Initial conclusions were based on experiments and calculations for a small number of elements such as Ni and Co. However, for many elements only a limited number of experimental data were available then, and they only hinted at values of metal-silicate D's at high PT conditions. In the ensuing decades there have been hundreds of new experiments carried out and published on a wide range of siderophile elements. At the same time several different models have been advanced to explain the siderophile elements in the earth's mantle: a) intermediate depth magma ocean; 25-30 GPa, b) deep magma ocean; up to 50 GPa, and c) early reduced and later oxidized magma ocean. Some studies have drawn conclusions based on a small subset of siderophile elements, or a set of elements that provides little leverage on the big picture (like slightly siderophile elements), and no single study has attempted to quantitatively explain more than 5 elements at a time. The purpose of this abstract is to update the predictive expressions outlined by Righter et al. (1997) with new experimental data from the last decade, test the predictive ability of these expressions against independent datasets (there are more data now to do this properly), and to apply the resulting expressions to the siderophile element patterns in Earth's upper mantle. The predictive expressions have the form: lnD = alnfO2 + b/T + cP/T + d(1Xs) + e(1Xc) + SigmafiXi + g These expressions are guided by the thermodynamics of simple metal-oxide equilibria that control each element, include terms that mimic the activity coefficients of each element in the metal and silicate, and quantify the effect of variable oxygen fugacity. Preliminary results confirm that D(Ni) and D(Co) converge at pressures near 25-30 GPa and approximately 2200 K, and show that D(Pd) and D(Cu) become too low at the PT conditions of the deepest models. Furthermore, models which force fit V and Cr mantle concentrations by metal-silicate equilibrium overlook the fact that at early Earth mantle fO2, these elements will be more compatible in Mg-perovskite and (Fe,Mg)O than in metal. Thus an intermediate depth magma ocean, at 25-30 GPa, 2200 K, and at IW-2, can explain more mantle siderophile element concentrations than other models.

Righter, Kevin↗

Variations on a Theme by Longhi: I, an Analysis of the Thermodynamic Underpinning of Fe, Mn, and Ni Partitioning into Olivine

Longhi et al. [1] have used the D(Ni) vs. D(Mg) parameterizations of Jones [2, 3] in attempting to explain the Ni systematics of lunar differentiation. A key element of the Jones parameterization and the Longhi et al. models is that, at very high temperatures, Ni may become incompatible in olivine. Unfortunately, there is no actual experimental evidence that this is ever the case [1]. To date, all experiments designed to demonstrate such incompatibility have failed. Here I will investigate the thermodynamic foundations of the D vs. D(Mg) trends for olivine/liquid discovered by [2].

Jones, John H.↗