Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixed finite element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Comparison of Two Approaches to Constructing Second- and Third-Order Nodal-Gradient Cell-Centered Finite-Volume Methods for Mixed-Element Grids

In this paper, we introduce a third-order nodal-gradient cell-centered finite volume scheme applicable to mixed-element grids based on a single numerical flux per face. Previously, we considered a split-quadrilateral-face approach, where we split each quadrilateral face of a non-tetrahedral cell into two triangles and then apply second- and third-order schemes designed for tetrahedral grids. This approach is relatively simple to implement but expensive because it requires two numerical flux evaluations per quadrilateral face. In this study, we consider another approach, where the surface flux quadrature is performed with a single numerical flux per face with flux corrections. It requires a 3×3 correction matrix to be stored at each face but is more economical than the split-quadrilateral-face approach. The two approaches are compared for three-dimensional flows on irregular hexahedral grids, and their relative merits are discussed.

Third-order scheme↗
NASA NTRS1997

Application of the Finite-Element Z-Matrix Method to e-H2 Collisions

The present study adapts the Z-matrix formulation using a mixed basis of finite elements and Gaussians. This is a energy-independent basis which allows flexible boundary conditions and is amenable to efficient algorithms for evaluating the necessary matrix elements with molecular targets.

Huo, Winifred M.↗
NASA NTRS1988

A fine grid finite element computation of two-dimensional high Reynolds number flows

A velocity-pressure-integrated mixed-interpolation Galerkin finite-element computation of the Navier-Stokes equations using the grids is presented. The velocity variables are interpolated using complete quadratic shape functions, and the pressure was interpolated using linear shape functions defined on a triangular element which is contained inside the quadratic element for velocity variables. Comprehensive computational results for a cavity flow at Reynolds number Re = 400-10,000 and a laminar backward-facing step flow at Re = 100-900 are presented. Many high-Re flows involve convection-dominated motion as well as diffusion-dominated motion in the flow domain. The computational results for both of the fluid motions compared favorably with high-accuracy finite-difference computational results and/or experimental data.

Kim, Sang-Wook↗
NASA NTRS1978

Numerical computation of transonic flows by finite-element and finite-difference methods

Studies on applications of the finite element approach to transonic flow calculations are reported. Different discretization techniques of the differential equations and boundary conditions are compared. Finite element analogs of Murman's mixed type finite difference operators for small disturbance formulations were constructed and the time dependent approach (using finite differences in time and finite elements in space) was examined.

Hafez, M. M.↗
NASA NTRS1985

Interlaminar fracture toughness: Three-dimensional finite element modeling for end-notch and mixed-mode flexure

A computational procedure is described for evaluating End-Notch-Flexure (ENF) and Mixed-Mode-Flexure (MMF) interlaminar fracture toughness in unidirectional fiber composites. The procedure consists of a three-dimensional finite element analysis in conjunction with the strain energy release rate concept and with composite micromechanics. The procedure is used to analyze select cases of ENF and MMF. The strain energy release rate predicted by this procedure is in good agreement with limited experimental data. The procedure is used to identify significant parameters associated with interlaminar fracture toughness. It is also used to determine the critical strain energy release rate and its attendant crack length in ENF and/or MMF. This computational procedure has considerable versatility/generality and provides extensive information about interlaminar fracture toughness in fiber composites.

Murthy, P. L. N.↗
NASA NTRS1982

Double noding technique for mixed mode crack propagation studies

A simple dynamic finite element algorithm for analyzing a propagating mixed mode crack tip is presented. A double noding technique, which can be easily incorporated into existing dynamic finite element codes, is used together with a corrected J integral to extract modes I and II dynamic stress intensity factors of a propagating crack. The utility of the procedure is demonstrated by analyzing test problems involving a mode I central crack propagating in a plate subjected to uniaxial tension, a mixed mode I and II stationary, slanted central crack in a plate subjected to uniaxial impact loading, and a mixed mode I and II extending, slanted single edge crack in a plate subjected to uniaxial tension.

Liaw, B. M.↗
NASA NTRS1984

Double noding technique for mixed mode crack propagation studies

A simple dynamic finite element algorithm for analyzing a propagating mixed mode crack tip is presented. A double noding technique, which can be easily incorporated into existing dynamic finite element codes, is used together with a corrected J integral to extract modes I and II dynamic stress intensity factors of a propagating crack. The utility of the procedure is demonstrated by analyzing test problems involving a mode I central crack propagating in a plate subjected to uniaxial tension, a mixed mode I and II stationary, slanted central crack in a plate subjected to uniaxial impact loading, and a mixed mode I and II extending, slanted single edge crack in a plate subjected to uniaxial tension. Previously announced in STAR as N83-13491

Liaw, B. M.↗
NASA NTRS1997

Computational Study of Electron-Molecule Collisions Related to Low-Temperature Plasmas

Computational study of electron-molecule collisions not only complements experimental measurements, but can also be used to investigate processes not readily accessible experimentally. A number of ab initio computational methods are available for these types of calculations. Here we describe a recently developed technique, the finite element Z-matrix method, Analogous to the R-matrix, method, it partitions the space into regions and employs real matrix elements. However, unlike the implementation of the R-matrix method commonly used in atomic and molecular physics, the Z-matrix method is fully variational. In the present implementation, a mixed basis of finite elements and Gaussians is used to represent the continuum electron, thus offering full flexibility without imposing fixed boundary conditions. Numerical examples include the electron-impact dissociation of N2 via the metastable A3Su+ state, a process which may be important in the lower thermosphere, and the dissociation of the CF radical, a process of interest to plasma etching. To understand the dissociation pathways, large scale quantum chemical calculations have been carried out for all target states which dissociate to the lowest five limits in the case of N2, and to the lowest two limits in the case of CF. For N2, the structural calculations clearly show the preference for predissociation if the initial state is the ground X1 Sg+ state, but direct dissociation appears to be preferable if the initial state is the A3Su+ state. Multi-configuration SCF target functions are used in the collisional calculation.

Huo, Winifred M.↗
NASA NTRS1992

Finite element method for optimal guidance of an advanced launch vehicle

A temporal finite element based on a mixed form of Hamilton's weak principle is summarized for optimal control problems. The resulting weak Hamiltonian finite element method is extended to allow for discontinuities in the states and/or discontinuities in the system equations. An extension of the formulation to allow for control inequality constraints is also presented. The formulation does not require element quadrature, and it produces a sparse system of nonlinear algebraic equations. To evaluate its feasibility for real-time guidance applications, this approach is applied to the trajectory optimization of a four-state, two-stage model with inequality constraints for an advanced launch vehicle. Numerical results for this model are presented and compared to results from a multiple-shooting code. The results show the accuracy and computational efficiency of the finite element method.

Hodges, Dewey H.↗
NASA NTRS1984

Methods for analysis of cracks in three-dimensional solids

Various analytical and numerical methods used to evaluate the stress intensity factors for cracks in three-dimensional (3-D) solids are reviewed. Classical exact solutions and many of the approximate methods used in 3-D analyses of cracks are reviewed. The exact solutions for embedded elliptic cracks in infinite solids are discussed. The approximate methods reviewed are the finite element methods, the boundary integral equation (BIE) method, the mixed methods (superposition of analytical and finite element method, stress difference method, discretization-error method, alternating method, finite element-alternating method), and the line-spring model. The finite element method with singularity elements is the most widely used method. The BIE method only needs modeling of the surfaces of the solid and so is gaining popularity. The line-spring model appears to be the quickest way to obtain good estimates of the stress intensity factors. The finite element-alternating method appears to yield the most accurate solution at the minimum cost.

Raju, I. S.↗
NASA NTRS1989

A review of some problems in global-local stress analysis

The various types of local-global finite-element problems point out the need to develop a new generation of software. First, this new software needs to have a complete analysis capability, encompassing linear and nonlinear analysis of 1-, 2-, and 3-dimensional finite-element models, as well as mixed dimensional models. The software must be capable of treating static and dynamic (vibration and transient response) problems, including the stability effects of initial stress, and the software should be able to treat both elastic and elasto-plastic materials. The software should carry a set of optional diagnostics to assist the program user during model generation in order to help avoid obvious structural modeling errors. In addition, the program software should be well documented so the user has a complete technical reference for each type of element contained in the program library, including information on such topics as the type of numerical integration, use of underintegration, and inclusion of incompatible modes, etc. Some packaged information should also be available to assist the user in building mixed-dimensional models. An important advancement in finite-element software should be in the development of program modularity, so that the user can select from a menu various basic operations in matrix structural analysis.

Nelson, Richard B.↗
DOE OSTI2021

Experimental modal analysis of SSR1 cryomodule for numerical model tuning and validation

The present activity aims to test the Cryomodule SSR1 to validate the corresponding mixed multibody-finite element numerical model and to determine the range of frequencies in which the first natural modes of the structure lie. The experimental activity consisted of a hammer test of the cryomodule at an early assembly stage at which the internal parts, constituting the cold mass, are accessible and, thus, many accelerometers can be attached to the beam string. The comparison between the experimental results obtained for the sub-assembly and the numerical results obtained for the corresponding sub-model, derived from the previously developed complete model, allowed to assess the validity of the numerical model and to get feedback on the effectiveness of the placement of the sensors in capturing the dynamic response of the system during transportation.

43 PARTICLE ACCELERATORS↗
NASA NTRS1993

A new conformal absorbing boundary condition for finite element meshes and parallelization of FEMATS

Some of the progress toward the development and parallelization of an improved version of the finite element code FEMATS is described. This is a finite element code for computing the scattering by arbitrarily shaped three dimensional surfaces composite scatterers. The following tasks were worked on during the report period: (1) new absorbing boundary conditions (ABC's) for truncating the finite element mesh; (2) mixed mesh termination schemes; (3) hierarchical elements and multigridding; (4) parallelization; and (5) various modeling enhancements (antenna feeds, anisotropy, and higher order GIBC).

Chatterjee, A.↗
NASA NTRSDate not supplied

USM3D-ME Revised SA-neg Implementation and Assessment for Seventh Drag Prediction Workshop Solutions

Simulations performed by an unstructured-grid, cell-centered, finite-volume, mixed-element flow solver USM3D-MEwere presented at the Seventh Drag Prediction Workshop (DPW-7). Reynolds-averaged Navier-Stokes (RANS) solutions for the NASA high-speed common research model wing-body configuration were computed using a new implementation of the negative variant of the Spalart-Allmaras turbulence model (SA-neg) with hierarchical adaptive nonlinear iteration method (HANIM).ThisUSM3D-ME enhancement improved efficiency and robustness of RANS solutions resulting in fast iterative convergence to machine zero residuals on mixed-element unstructured grids provided by the DPW-7 organizing committee. This paper presents theoretical foundations for the new implementation of the SA-neg model and analyzesUSM3D-ME solutions for flow conditions corresponding to the required DPW-7 cases.

Boris Diskin↗
NASA NTRS1991

Transient modeling/analysis of hyperbolic heat conduction problems employing mixed implicit-explicit alpha method

This paper describes the evaluation of mixed implicit-explicit finite element formulations for hyperbolic heat conduction problems involving non-Fourier effects. In particular, mixed implicit-explicit formulations employing the alpha method proposed by Hughes et al. (1987, 1990) are described for the numerical simulation of hyperbolic heat conduction models, which involves time-dependent relaxation effects. Existing analytical approaches for modeling/analysis of such models involve complex mathematical formulations for obtaining closed-form solutions, while in certain numerical formulations the difficulties include severe oscillatory solution behavior (which often disguises the true response) in the vicinity of the thermal disturbances, which propagate with finite velocities. In view of these factors, the alpha method is evaluated to assess the control of the amount of numerical dissipation for predicting the transient propagating thermal disturbances. Numerical test models are presented, and pertinent conclusions are drawn for the mixed-time integration simulation of hyperbolic heat conduction models involving non-Fourier effects.

Tamma, Kumar K.↗
NASA NTRS2020

DEVELOPMENT AND APPLICATION OF BENCHMARK EXAMPLES FOR MIXED-MODE I/II FATIGUE GROWTH PREDICTIONS

The development of benchmark examples for assessing growth prediction capabilities is presented and demonstrated for a commercial code. The examples are based on finite element models of Mixed-Mode Bending (MMB) specimens for three different mode ratios. The examples are independent of the analysis software used and allow the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, based on existing results for delamination propagation under static loading, new benchmark examples for delamination growth under fatigue loading were created. Second, starting from an initially straight front, the delamination was allowed to grow under fatigue loading. The number of cycles to delamination onset and the number of cycles during delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with choosing the input parameters of the particular implementation. Overall the results from automatic propagation are encouraging, however, selecting the appropriate input parameters was not straightforward and often required an iterative procedure.

Composites↗