Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magic angle spinning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

In Silico Design of DNP Polarizing Agents: Can Current Dinitroxides Be Improved?

Numerical calculations of enhancement factors offered by dynamic nuclear polarization in solids under magic angle spinning (DNP-MAS) were performed to determine the optimal EPR parameters for a dinitroxide polarizing agent. We found that the DNP performance of a biradical is more tolerant to the relative orientation of the two nitroxide moieties than previously thought. In general, any condition in which the gyy tensor components of both radicals are perpendicular to one another is expected to have near-optimal DNP performance. These results highlight the important role of the exchange coupling, which can lessen the sensitivity of DNP performance to the inter-radical distance, but also lead to lower enhancements when the number of atoms in the linker becomes less than three. Finally, the calculations showed that the electron T1e value should be near 500μs to yield optimal performance. Importantly, the newest polarizing agents already feature all of the qualities of the optimal polarizing agent, leaving little room for further improvement. Further research into DNP polarizing agents should then target non-nitroxide radicals, as well as improvements in sample formulations to advance high-temperature DNP and limit quenching and reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the Reaction Pathways of Veratrylglycero-β-Guaiacyl Ether Degradation over Metal-Free Solid Acid Catalyst with Hydrogen

Efficient cleavage of β-O-4 bonds in lignin to high-yield aromatic compounds for the potential production of fuels and chemicals is vital for the economics of the modern biorefinery industry. This work is distinct in that a detailed mechanistic analysis of the reaction pathways of veratrylglycero-β-guaiacyl ether (VGE) catalyzed by transition-metal-free solid acid zeolite in aqueous conditions at high hydrogen pressure has been performed. VGE degradation produced high monomers yields (≈87 %), including guaiacol (48.2 %), 1-(3,4-dimethoxyphenyl)ethanol (10.3 %), 1-(3,4-dimethoxyphenyl)-2-propanol (6.1 %), 3,4-dimethoxyphenylpropanol (4.7 %), 3,4-dimethoxycinnamyl alcohol (4.1 %), and 1,2-dimethoxy-4-propylbenzene (2 %). The products were identified and confirmed by the in situ solid-state magic angle spinning (MAS) 13 C NMR spectroscopy in real-time conditions and the two-dimensional gas chromatography (GC×GC). A variety of products reveal the crucial role of hydrogen, water, and acid sites for heterolytic cleavage of the β-O-4 bond in VGE. Decarbonylation, hydrogenolysis, hydrogenation, and dehydration reaction pathways are proposed and further validated using first-principles calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols

This study outlines a method for producing chemically recyclable crosslinked polyesters using renewable polyols-glycerol and sorbitol-combined with adipic acid (AA), which is transformed/activated into a polyanhydride mixture prior to use. A three-step procedure has been designed: 1) an acid-catalyzed reaction of AA with nontoxic isopropenyl acetate or acetic anhydride to form a crosslinking mixture (CLM) made of adipic-acetic mixed polyanhydrides; 2) a solvent- and additive-free process where glycerol or sorbitol, or a combination thereof, is reacted with the CLM to achieve a prepolymer, and 3) a casting/molding of the liquid viscous prepolymer to yield a thermoset as the end product. Different thermosets (eight examples) are prepared by changing the reagents ratio. These solids are thoroughly characterized by tensile tests, DMA, high-resolution magic angle spinning and solid-state NMR, thermal gravimetric analysis, DSC, and fourier transformed infra red (FT-IR) spectroscopy. The formation of cross-linked polyesters is confirmed in all cases, but mechanical properties varied significantly from one specimen to another. Interestingly, a tensile strength up to 18 MPa-approximately an order of magnitude higher than similar polymers-is achieved when sorbitol and the CLM are used in a 1:1 wt% ratio. The chemical recycle of the resulting polymers is achieved via methanolysis with quantitative recovery of the monomeric units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multidimensional solid-state NMR studies of the structure and dynamics of pectic polysaccharides in uniformly 13C-labeled Arabidopsis primary cell walls

Plant cell wall (CW) polysaccharides are responsible for the mechanical strength and growth of plant cells; however, the high-resolution structure and dynamics of the CW polysaccharides are still poorly understood because of the insoluble nature of these molecules. Here, we use 2D and 3D magic-angle-spinning (MAS) solid-state NMR (SSNMR) to investigate the structural role of pectins in the plant CW. Intact and partially depectinated primary CWs of Arabidopsis thaliana were uniformly labeled with 13C and their NMR spectra were compared. Recent 13C resonance assignment of the major polysaccharides in Arabidopsis thaliana CWs allowed us to determine the effects of depectination on the intermolecular packing and dynamics of the remaining wall polysaccharides. 2D and 3D correlation spectra show the suppression of pectin signals, confirming partial pectin removal by chelating agents and sodium carbonate. Importantly, higher cross peaks are observed in 2D and 3D 13C spectra of the depectinated CW, suggesting higher rigidity and denser packing of the remaining wall polysaccharides compared with the intact CW. 13C spin–lattice relaxation times and 1H rotating-frame spin–lattice relaxation times indicate that the polysaccharides are more rigid on both the nanosecond and microsecond timescales in the depectinated CW. Taken together, these results indicate that pectic polysaccharides are highly dynamic and endow the polysaccharide network of the primary CW with mobility and flexibility, which may be important for pectin functions. This study demonstrates the capability of multidimensional SSNMR to determine the intermolecular interactions and dynamic structures of complex plant materials under near-native conditions. Copyright © 2012 John Wiley & Sons, Ltd.

36 MATERIALS SCIENCE↗

Characterization of Free Surface-Bound and Entrapped Water Environments in Poly(N-Isopropyl Acrylamide) Hydrogels via 1H HRMAS PFG NMR Spectroscopy

We found that different water environments in poly(N-isopropyl acrylamide) (PNIPAAm) hydrogels are identified and characterized using 1 H high resolution magic angle spinning (HRMAS) nuclear magnetic resonance (NMR). Local water environments corresponding to a “free” highly mobile species, along with waters showing restricted dynamics are resolved in these swollen hydro-gels. For photo-initiated polymerized PNIPAAm gels, an additional entrapped water species is observed. Spin–spin R 2 relaxation experiments support the argument of reduced mobility in the restricted and entrapped water species. Furthermore, by combining pulse field gradient techniques with HRMAS NMR it is possible to directly measure the self-diffusion rate for these different water environments. The behavior of the heterogeneous water environments through the lower critical solution temperature transition is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Interfacial Reaction Pathways in Atomic Layer Deposition on Sulfide Superionic Conductors

Sulfide superionic conductors (e.g., argyrodite Li 6 PS 5 Cl, LPSCl) are extremely promising for all solid-state batteries, but poor atmospheric stability and high interfacial reactivity limit widespread adoption. Coating LPSCl powders with ultrathin coatings using atomic layer deposition (ALD) mitigates these problems, protecting against atmospheric degradation and reducing reactivity with Li metal, yielding more stable cycling. Despite significant promise, the ALD mechanism is unknown, hampering the development of new coating chemistries. In this study, we elucidate the mechanism for Al 2 O 3 ALD on LPSCl using trimethyl aluminum (TMA) and H 2 O by combining in situ Fourier transform infrared spectroscopy, ex situ solid-state magic angle spinning nuclear magnetic resonance, UV Raman spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations. We determine that ALD Al 2 O 3 nucleates promptly via TMA reaction with native —OH, —SH, and PS 3 -OH groups to form transient C–Al–O(S) species that are rapidly hydrolyzed during the subsequent H 2 O exposure. This reversible transformation maintains surface nucleophilicity and prevents sulfide decomposition. The resulting layer-by-layer growth leads to highly conformal Al 2 O 3 coatings on LPSCl that are readily scalable to ≥ 50 g quantities using a rotating drum fixture. This detailed understanding of ALD surface reactions provides critical insights guiding the selection of future ALD chemistries with improved performance.

atomic layer deposition↗

The Stoichiometry of Synthetic Alunite as a Function of Hydrothermal Aging Investigated by Solid-State NMR Spectroscopy, Powder X-ray Diffraction and Infrared Spectroscopy

The stoichiometry of a series of synthetic alunite [nominally KAl3(SO4)2(OH)6] samples prepared by hydrothermal methods as a function of reaction time (1–31 days) has been investigated by powder X-ray diffraction, Fourier transform infrared spectroscopy as well as solid-state 1H and 27Al magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. The 1H MAS NMR spectra recorded at high magnetic field (21.1 T, 900 MHz) allowed for a clear separation of the different proton environments and for quantitative determination of the aluminum vacancy concentration as a function of time. The concentration of structural defects determined from, i.e., aluminum vacancies was reduced from 4 to 1 %, as the reaction time was extended from one to 31 days based on 1H MAS NMR. This was further supported by an increase of the unit cell parameter c, which is indicative of the relative concentration of potassium defects present, from 17.261(1) to 17.324(5) Å. Solid-state 27Al MAS NMR revealed a decrease in the defect concentration as a function of time and showed the presence of 7–10 % impurities in the samples.

Environmental Molecular Sciences Laboratory↗

Binding of gold(III) with silver(I) dipropyldithiocarbamate: supramolecular self-assembly (role of secondary Au…S and Ag…S bonds) and thermal behavior of the ionic-polymer complex ([Au(S{sub 2}CNPr{sub 2}){sub 2}][AgCl{sub 2}]){sub n}

The double ionic-polymer complex ([Au(S{sub 2}CNPr{sub 2}){sub 2}][AgCl{sub 2}]){sub n} (1) was prepared as an individual fixation form of gold(III) from NaCl solutions with silver(I) dipropyldithiocarbamate and was characterized by single-crystal X-ray diffraction and {sup 13}C magic-angle spinning (MAS) NMR spectroscopy. The structure of 1 comprises two nonequivalent centrosymmetric complex cations [Au(S{sub 2}CNPr{sub 2}){sub 2}]{sup +} (A and B) and the discrete linear anion [AgCl{sub 2}]{sup –}. Gold(III) cations are linked by pairs of unsymmetrical secondary Au…S bonds to form linear supramolecular chains (…A…B…)n. Neighboring cations are additionally linked by [AgCl{sub 2}]{sup –} anions via secondary Ag…S and Cl…S bonds, the anions being involved in the overall stabilization of the supramolecular structure. The cation–anion interactions lead to a distortion of the linear configuration of the [AgCl{sub 2}]{sup –} anion. The character of thermolysis of 1 accompanied by quantitative regeneration of bound Au and Ag was established by simultaneous thermal analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Study on MgO Solubility in High-Alumina-Content Slag System

In the current study, the MgO solubility in molten slag was measured to clarify the effect of basicity and Al{sub 2}O{sub 3} content on the MgO solubility equilibrating with the spinel solid phase in the CaO-SiO{sub 2}-Al{sub 2}O{sub 3} system. The MgO solubility decreased with the increasing basicity of the slag. However, the MgO solubility in the spinel equilibrium region exhibited different dependence when compared with the basicity dependence in the MgO equilibrium region. The aforementioned experimental results were quantitatively analyzed using magic-angle spinning (MAS) {sup 27}Al nuclear magnetic resonance (NMR) spectroscopy, in which the fraction of Al ions in the slag of spinel equilibrium region was changed to 4, 5, and 6. In addition, the analysis of the degree of Al avoidance modeling indicated that the change in bridging oxygen (BO) linkage species (distinguished into Al-O-Al, Si-O-Si, and Al-O-Si) was based on the Al/Si ratio change. The aforementioned change in BO linkage species led to a change in the MgO solubility with the stability of the alumina. Thus, the spinel equilibrium dissolution mechanism is discussed in detail in terms of the thermodynamic and structural influence in molten slag.

36 MATERIALS SCIENCE↗

Bimetallic Mo-Co/ZSM-5 and Mo-Ni/ZSM-5 catalysts for methane dehydroaromatization: A study of the effect of pretreatment and metal loadings on the catalytic behavior

Here, methane dehydroaromatization is studied using different loadings (0.2 wt%, 0.6 and 1 wt%) of Co and Ni additives on a 6 wt% Mo/ZSM-5 catalyst to evaluate the promoting effect of Ni and Co on reactivity and stability of the catalysts. A synergy between Mo and the additives is observed when combining a reduction/carburization pretreatment with an optimum additive loading: benzene yield and catalytic stability are both improved. The fresh and spent samples were characterized by X-Ray Diffraction, 27 Al Magic-Angle Spinning Solid State Nuclear Magnetic Resonance Spectroscopy, Temperature-Programmed Reduction and Thermogravimetric Analysis. The results suggest that catalytic enhancement in precarburized Mo-Co and Mo-Ni samples is due to a combination of effects: extraction of Al from the ZSM-5 framework to form inactive Al 2 (MoO 4 ) 3 is reduced, interaction of Mo with the additives enhances the retention of Mo species within the zeolite channels, prevents Mo aggregation in reaction and modifies the reducibility of the Mo sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Competitive effects of glucan’s main hydrolysates on biochar formation: A combined experiment and density functional theory analysis

We report the complexity of polysaccharide hydrothermal products increases the difficulty of exploring the formation of biochar, limiting the development of biochar. This work clarifies the completive effects of glucan’s main hydrolysates on biochar formation from three aspects: experimental, thermodynamic, and kinetic. The products distribution illustrates that 5-HMF, FA, and LA are mainly involved in the formation of biochar. Biochar mainly includes furan ring, ether group, and ester group by the analysis of magic-angle-spinning nuclear magnetic resonance, X-ray photoelectron spectroscopy, and elemental analysis. Combined experiments and density functional theory analysis, the etherification reaction of 5-HMF itself is most likely to occur and is key to form biochar, followed by the esterification of FA with 5-HMF, and then the etherification of 5-HMF and LA. The further verified experiments also manifest these results. This work will develop a foundation for exploring the complex formation mechanism of cellulose-based biochar.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of alumina incorporation on the sulfur tolerance of the dual-catalyst aftertreatment system for reduction of nitrogen oxides under lean conditions

Presence of sulfur or sulfur additives in natural gas lead to the formation of sulfur dioxide in the exhaust stream of natural gas-fired lean-burn engines. The sulfur tolerance and hydrothermal stability of the dual-catalyst aftertreatment system comprising a reduction catalyst (palladium supported on sulfated zirconia- Pd/SZ) and an oxidation catalyst (cobalt oxide supported on ceria- CoO x /CeO 2 ) for NOx reduction under lean-burn conditions has been tested under simulated engine exhaust conditions. Alumina-incorporated Pd/SZ (Pd/SZ(Alumina)) reduction catalyst as part of the dual catalyst bed demonstrated superior sulfur tolerance in the presence of 5 ppm SO 2 in the feed. The ratio of the reduction to oxidation catalyst was also seen to affect the hydrothermal stability under wet conditions with SO 2 in the reaction medium. The effect of hydrocarbon and water concentration in the reaction mixture on the sulfur tolerance of the dual-catalyst bed was studied. Increasing the reaction temperature from 450°C to 500°C demonstrated very stable NO x conversion and improved CH 4 conversions when the dual-catalyst bed was kept on-stream for 40 h -1 . X-ray photoelectron spectroscopy on samples poisoned with SO 2 ex-situ revealed the deposition of surface sulfates on the Pd/SZ catalyst samples and a combination of sulfates and sulfites on the CoO x /CeO 2 on treatment with SO 2 . The presence of alumina in the Pd/SZ sample protects the support from SO 2 poisoning as the oxidation state of the zirconia support remained largely unchanged on poisoning while in the CoO x /CeO 2 sample, sulfur poisoning likely affects the cerium redox cycle (Ce 3+ -Ce 4+ ). 27 Al magic angle spinning nuclear magnetic resonance (MAS NMR) revealed redistribution of the octahedral and tetrahedral Al-O coordination on SO 2 poisoning. Due to association with deposited sulfates on the catalyst, shielding effect on the Al nuclei resulted in an increased octahedral Al-O coordination in the poisoned sample.

03 NATURAL GAS↗

Study of ion cluster reorientation process of geopolymerisation reaction using semi-empirical AM1 calculations

In this paper all the possible reaction pathways involved in ion clusters reorientation process of metakaolin based Geopolymeric cement were systemically investigated according to thermodynamic theory. The reaction energy of every possible reorientation pathway was also calculated using computational chemistry method-semi-empirical AM1 calculation. The optimum reorientation pathway was analyzed based on the energy-minimized principle. The calculation results showed that Si-Al hybrid reorientation should be primary reorientation pathway of Geopolymeric cement made with NaOH or KOH activated metakaolin. This viewpoint was also verified by Nuclear Magnetic Resonance Spectroscopy equipped with Magic Angle Spinning technique (MAS-NMR). In addition, the semi-empirical AM1 calculations revealed that the reorientation reaction is easier and stronger in NaOH solution than in KOH solution.

36 MATERIALS SCIENCE↗

Synthesis and nano-mechanical characterization of calcium-silicate-hydrate (C-S-H) made with 1.5 CaO/SiO{sub 2} mixture

In this study, calcium silicate hydrate (C-S-H) is synthesized and characterized. C-S-H slurry was made with calcium oxide (CaO) to micro-silica (SiO{sub 2}) mixture ratio of 1.5 and enough deionized water. The slurry was continuously mixed for 7 days, then the excess water was removed. Two methods of drying were implemented: one method used the standard d-dry technique and the other was equilibrated to 11% relative humidity (RH). The dried powders were characterized using thermo gravimetric analysis (TGA), X-ray diffraction analysis (XRDA), and {sup 29}Si magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. The stoichiometric formulas of synthetic C-S-H powders dried to d-dry and 11% RH in this study were approximated as C{sub 1.2}SH{sub 0.7} and C{sub 1.2}SH{sub 2.4} respectively. The powders were then compacted to create specimens with porosities similar to C-S-H in hydrated cement. The specimens underwent nanoindentation to mechanically characterize C-S-H. The experiments provide insight on the nanoscale mechanical characteristics of C-S-H.

36 MATERIALS SCIENCE↗

Friedel's salt formation in sulfoaluminate cements: A combined XRD and {sup 27}Al MAS NMR study

Four different binders based on calcium sulfoaluminate cements have been submitted to accelerated chlorination through ionic exchange on hydrated pastes, in order to investigate their ability to chemically bind chloride ions that might reduce chloride penetration. The composition of hydrated cements before and after the treatment was evaluated by means of an X-Ray Diffraction–{sup 27}Al Magic Angle Spinning Nuclear Magnetic Resonance Spectroscopy combined study, allowing to take into account even partially amorphous phases and to make quantitative assumption on the relative abundance of the different aluminium-containing phases. It was found that low SO{sub 3} Sulfoaluminate–Portland ternary systems are the most effective in binding chloride ions and the active role played by different members of the AFm family in chloride uptake was confirmed. Moreover, a peculiar behavior related to the formation of Friedel's salt in different pH conditions was also established for the different cements.

36 MATERIALS SCIENCE↗

Structural changes in C–S–H gel during dissolution: Small-angle neutron scattering and Si-NMR characterization

Flow-through experiments were conducted to study the calcium–silicate–hydrate (C–S–H) gel dissolution kinetics. During C–S–H gel dissolution the initial aqueous Ca/Si ratio decreases to reach the stoichiometric value of the Ca/Si ratio of a tobermorite-like phase (Ca/Si = 0.83). As the Ca/Si ratio decreases, the solid C–S–H dissolution rate increases from (4.5 × 10{sup −} {sup 14} to 6.7 × 10{sup −} {sup 12}) mol m{sup −} {sup 2} s{sup −} {sup 1}. The changes in the microstructure of the dissolving C–S–H gel were characterized by small-angle neutron scattering (SANS) and {sup 29}Si magic-angle-spinning nuclear magnetic resonance ({sup 29}Si-MAS NMR). The SANS data were fitted using a fractal model. The SANS specific surface area tends to increase with time and the obtained fit parameters reflect the changes in the nanostructure of the dissolving solid C–S–H within the gel. The {sup 29}Si MAS NMR analyses show that with dissolution the solid C–S–H structure tends to a more ordered tobermorite structure, in agreement with the Ca/Si ratio evolution.

36 MATERIALS SCIENCE↗

Mineralization dynamics of metakaolin-based alkali-activated cements

This paper investigates the early-age dynamics of mineral formation in metakaolin-based alkali-activated cements. The effects of silica availability and alkali content on mineral formation were investigated via X-ray diffraction and solid-state {sup 29}Si magic-angle spinning nuclear magnetic resonance spectroscopy at 2, 7, 14, and 28 days. Silica availability was controlled by using either liquid- (immediate) or solid-based (gradual) sodium silicate supplements. Mineral (zeolitic) and amorphous microstructural characteristics were correlated with observed changes in bulk physical properties, namely shrinkage, density, and porosity. Results demonstrate that, while alkali content controls the mineralization in immediately available silica systems, alkali content controls the silica availability in gradually available silica systems. Immediate silica availability generally leads to a more favorable mineral formation as demonstrated by correlated improvements in bulk physical properties.

36 MATERIALS SCIENCE↗