Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC RIGIDITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Rotor dynamic behaviour of a high-speed oil-free motor compressor with a rigid coupling supported on four radial magnetic bearings

The combination of a high-speed motor, dry gas seals, and magnetic bearings realized in this unit facilitates the elimination of oil. The motor is coupled with a quill shaft to the compressor. This yields higher natural frequencies of the rotor than with the use of a diaphragm coupling and helps to maintain a sufficient margin of the maximum speed to the frequency of the second compressor bending mode. However, the controller of each bearing then has to take the combined modes of both machines into account. The requirements for the controller to ensure stability and sufficient damping of all critical speeds are designed and compared with the implemented controller. The calculated closed loop behavior was confirmed experimentally, except the stability of some higher modes due to slight frequency deviations of the rotor model to the actual rotor. The influence of a mechanical damper as a device to provide additional damping to high models is demonstrated theoretically. After all, it was not necessary to install the damper, since all modes cold be stabilized by the controller.

Schmied, J.↗

Stability of spin-driven ferroelectricity in the thin-film limit: Coupling of magnetic and electric order in multiferroic TbMnO3 films

We demonstrate spin-spiral-induced ferroelectricity in epitaxial TbMnO3 films grown on YAlO3 substrates down to a film thickness of 6nm. The ferroelectric polarization is identified by optical second-harmonic generation. Using x-ray resonant magnetic scattering we directly prove the existence of a noncollinear magnetic structure in the ferroelectric phase and thus bulk-like multiferroicity. The electric-field-induced reversal of the magnetic domains along with the reversal of the ferroelectric polarization evidences the rigid coupling of magnetic and ferroelectric order and hence a giant magnetoelectric effect in the films.

Becher, Carsten↗

HZE particle shielding using confined magnetic fields

The great rigidities characteristic of high energy heavy ion (HZE) particles are judged to preclude near term use of confined magnetic fields of reasonable dimensions and strengths for small spacecraft shielding on long duration manned missions. It is noted that a Mars mission-class shield, although effective against solar protons, would be useless for HZE particles unless the mass and size of the shield are increased by several orders of magnitude (to yield a shield comparable to those contemplated for permanent space stations).

Townsend, L. W.↗

Electric field control of magnetization direction across the antiferromagnetic to ferromagnetic transition

Electric-field-induced magnetic switching can lead to a new paradigm of ultra-low power nonvolatile magnetoelectric random access memory (MeRAM). To date the realization of MeRAM relies primarily on ferromagnetic (FM) based heterostructures which exhibit low voltage-controlled magnetic anisotropy (VCMA) efficiency. On the other hand, manipulation of magnetism in antiferromagnetic (AFM) based nanojunctions by purely electric field means (rather than E-field induced strain) remains unexplored thus far. Ab initio electronic structure calculations reveal that the VCMA of ultrathin FeRh/MgO bilayers exhibits distinct linear or nonlinear behavior across the AFM to FM metamagnetic transition depending on the Fe- or Rh-interface termination. We predict that the AFM Fe-terminated phase undergoes an E-field magnetization switching with large VCMA efficiency and a spin reorientation across the metamagnetic transition. In sharp contrast, while the Rh-terminated interface exhibits large out-ofplane (in-plane) MA in the FM (AFM) phase, its magnetization is more rigid to external E-field. These findings demonstrate that manipulation of the AFM Néel-order magnetization direction via purely E-field means can pave the way toward ultra-low energy AFM-based MeRAM devices.

36 MATERIALS SCIENCE↗

Transfer of Millimeter‐Scale Strained Multiferroic Epitaxial Thin Films on Rigid Substrates via an Epoxy Method Producing Magnetic Property Enhancement

The demonstration of epitaxial thin film transfer has enormous potential for thin film devices free from the traditional substrate epitaxy limitations. However, large-area continuous film transfer remains a challenge for the commonly reported polymer-based transfer methods due to bending and cracking during transfer, especially for highly strained epitaxial thin films. In this work, a new epoxy-based, rigid transfer method is used to transfer films from an SrTiO 3 (STO) growth substrate onto various new substrates, including those that will typically pose significant problems for epitaxy. An epitaxial multiferroic Bi 3 Fe 2 Mn 2 O x (BFMO) layered supercell (LSC) material is selected as the thin film for this demonstration. The results of surface and structure studies show an order of magnitude increase in the continuous area of transferred films when compared to previous transfer methods. The magnetic properties of the BFMO LSC films are shown to be enhanced by the release of strain in this method, and ferromagnetic resonance is found with an exceptionally low Gilbert damping coefficient. The large-area transfer of this highly strained complex oxide BFMO thin film presents enormous potential for the integration of many other multifunctional oxides onto new substrates for future magnetic sensors and memory devices.

bismuth oxides↗

Fixed-base and two-body equations of motion for an Annular Momentum Control Device (AMCD)

Fixed base and two body equations of motion for an Annular Momentum Control Device (AMCD) are presented. An AMCD consists of a spinning annular rim which is suspended by noncontacting magnetic bearings and powered by a noncontacting linear electromagnetic motor. The fixed base equations are for a rigid AMCD rim suspended by magnetic bearings attached to a rigid fixed base. The two body equations are for a rigid AMCD rim suspended by magnetic bearings attached to a rigid body spacecraft. The fixed base equations are applicable to any potential ground based AMCD application such as energy storage.

Groom, N. J.↗

Robust and real-time rotor control with magnetic bearings

This paper deals with the sliding mode control of a rigid rotor via radial magnetic bearings. The digital control algorithm and the results from numerical simulations are presented for an experimental rig. The experimental system which has been set up to digitally implement and validate the sliding mode control algorithm is described. Two methods for the development of control softwares are presented. Experimental results for individual rotor axis are discussed.

Sinha, A.↗

Alignment of the Alpha Magnetic Spectrometer (AMS) in space

Abstract The Alpha Magnetic Spectrometer (AMS) is a precision particle physics detector operating at an altitude of $$\sim 410$$ ∼ 410 km aboard the International Space Station. The AMS silicon tracker, together with the permanent magnet, measures the rigidity (momentum/charge) of cosmic rays in the range from $$\sim 0.5$$ ∼ 0.5 GV to several TV. In order to have accurate rigidity measurements, the positions of more than 2000 tracker modules have to be determined at the micron level by an alignment procedure. The tracker was first aligned using the 400 GeV/c proton test beam at CERN and then re-aligned using cosmic-ray events after being launched into space. A unique method to align the permanent magnetic spectrometer for a space experiment is presented. The developed underlying mathematical algorithm is discussed in detail.

47 OTHER INSTRUMENTATION↗

The Role of Azimuthal Prestress in the Longitudinal Degradation of Nb 3 Sn Superconducting Magnets

Superconducting magnet coils are subject to enormous electro-magnetic forces which push the cables away from the winding pole, and against the surrounding structure. This structure is usually optimized trying to limit the overall motion and the strains experienced by the superconducting elements. To achieve this, preload forces are applied both in the coil cross-section and along its length. If the e.m. forces overcome these preloads, separation between the coil and the pole occurs, resulting in an overall loss of rigidity. During the magnet design process, it is often tempting to treat the optimization of the azimuthal and longitudinal preload systems separately. However, the two are inextricably related: as the cross-section preload increases, friction can prevent any motion in the longitudinal plane, and decreasing it can instead allow dangerous motions in the conductor ends. The latter can result in very high strains and, in Nb 3 Sn conductors, damage that can prevent the magnet to reach the desired performances. In an attempt to define design guidelines, in this paper we use simplified numerical models to compute, as a function of the in-plane prestress, the variation of the peak strains in the end region of the coils. Finally, we investigate the impact of the azimuthal prestress on a real magnet case, the High-Luminosity Nb 3 Sn Quadrupole MQXF.

Nb3Sn↗

Magnetic properties of high-T(sub c) superconductors: Rigid levitation, flux pinning, thermal depinning, and fluctuation

The levitation of high-T(sub c) superconductors is quite conspicuous: Above magnets of low symmetry a disk of these ceramics floats motionless, without vibration or rotation; it has a continuous range of stable positions and orientations as if it were stuck in sand. Some specimens may even be suspended above or below the same magnet. This fascinating stability, inherent to no other type of levitation, is caused by the pinning of magnetic flux lines by inhomogeneities inside these extreme type-2 superconductors. The talk deals with pinning of magnetic flux in these materials, with flux flow, flux creep, thermally activated depinning, and the thermal fluctuation of the vortex positions in the flux line lattice (often called flux lattice melting). Also discussed are the fluctuations of the (nearly periodic) magnetic field inside these superconductors which are caused by random pinning sites and by the finite temperature. These fluctuations broaden the van-Hove singularities observed in the density of the magnetic field by nuclear magnetic resonance and by muon spin rotation.

Brandt, E. H.↗

On the distortion of the Jovian magnetic field R greater than about 40 Jovian radii as deduced from charged particle studies

The relationship between the rotation of Jupiter's magnetic field and time variations in the intensity of nearly 6 to 30 MeV electrons observed by Pioneer 10 in the outer regions of Jupiter's magnetosphere is considered. The 6-30 MeV electron flux showed regular intensity variations with a period of approximately 10 hours. The behavior of this energetic electron flux is found to be most consistent with confinement of particles to a magnetic equatorial plane which is considerably distorted from the shape expected for rigid corotation of the magnetic field with Jupiter. The distortion is likely to arise from stresses resulting from interaction of the magnetosphere with the solar wind and from inertial effects of the magnetospheric plasma.

Mckibben, R. B.↗

Rotating concave eddy current probe

A rotating concave eddy current probe for detecting fatigue cracks hidden from view underneath the head of a raised head fastener, such as a buttonhead-type rivet, used to join together structural skins, such as aluminum aircraft skins. The probe has a recessed concave dimple in its bottom surface that closely conforms to the shape of the raised head. The concave dimple holds the probe in good alignment on top of the rivet while the probe is rotated around the rivet's centerline. One or more magnetic coils are rigidly embedded within the probe's cylindrical body, which is made of a non-conducting material. This design overcomes the inspection impediment associated with widely varying conductivity in fastened joints.

47 OTHER INSTRUMENTATION↗

Measurement of the Abundance of Radioactive Be-10 and Other Light Isotopes in Cosmic Radiation Up to 2 GeV /Nucleon with the Balloon-Borne Instrument Isomax

The Isotope Magnet Experiment (ISOMAX), a balloon-borne superconducting magnet spectrometer, was designed to measure the isotopic composition of the light isotopes (3 les than or = Z less than or = 8) of cosmic radiation up to 4 GeV/nucleon with a mass resolution of better than 0.25 amu by using the velocity versus rigidity technique. To achieve this stringent mass resolution, ISOMAX was composed of three major detector systems: a magnetic rigidity spectrometer with a precision drift chamber tracker in conjunction with a three-layer time-of-flight system, and two silica-aerogel Cerenkov counters for velocity determination. A special emphasis of the ISOMAX program was the accurate measurement of radioactive Be-10 with respect to its stable neighbor isotope Be-9, which provides important constraints on the age of cosmic rays in the Galaxy. ISOMAX had its first balloon flight on 1998 August 4-5 from Lynn Lake, Manitoba, Canada. Thirteen hours of data were recorded during this flight at a residual atmosphere of less than 5 g/sq cm. The isotopic ratio at the top of the atmosphere for Be-10/Be-9 was measured to be 0.195 +/- 0.036 (statistical) +/- 0.039 (systematic) between 0.26 and 1.03 GeV/nucleon and 0.317 +/- 0.109(statistical) +/- 0.042(systematic) between 1.13 and 2.03 GeV/nucleon. This is the first measurement of its kind above l GeV/nucleon. ISOMAX results tend to be higher than predictions from current propagation models. In addition to the beryllium results, we report the isotopic ratios of neighboring lithium and boron in the energy range of the time-of-flight system (up to approx. 1 GeV/nucleon). The lithium and boron ratios agree well with existing data and model predictions at similar energies.

Hams, T.↗

Abundance of the Radioactive Be-10 in the Cosmic Radiation up to 2 GeVnucleon-l with the Balloon-borne Instrument ISOMAX1998

The Isotope Magnet Experiment (ISOMAX) a balloon-borne superconducting magnet spectrometer was designed to measure the isotopic composition of the light isotopes (3 less than or equal to Z less than or equal to 8) of the cosmic radiation up to 4 GeV nucleon (exp -1) with a mass resolution of better than 0.25 amu by using the velocity vs. rigidity technique. To achieve this stringent mass resolution ISOMAX was comprised of three major detector systems, a magnetic rigidity spectrometer with a precision drift chamber tracker in conjunction with a three-layer time-of-flight system and two silica-aerogel Cherenkov counters for the velocity determination. A special emphasis of the ISOMAX program was the accurate measurement of radioactive Be-10 with respect to its stable neighbor isotope Be-9, which provides important constraints on the age of cosmic rays in the Galaxy. ISOMAX had its first balloon flight on August 4-5, 1998, from Lynn Lake, Manitoba, Canada. Thirteen hours of data were recorded during this flight at a residual atmosphere of less than 5 g per square centimeter. The isotopic ratio at the top of the atmosphere for Be-10/Be-9 was measured to be 0.195 plus or minus 0.036 (statistical) plus or minus 0.039 (systematic) between 0.26 - 1.03GeV nucleon (exp -1) and 0.317 plus or minus 0.109 (statistical) plus or minus 0.042 (systematic) between 1.13 - 2.03GeV nucleon(exp -1). This is the first measurement of its kind above 1 GeV nucleon (exp -1). ISOMAX results tend to be higher than predictions from current propagation models.

Hams, T.↗

Probing T Cell 3D Mechanosensing With Magnetically-Actuated Structures

The ability of cells to recognize and respond to the mechanical properties of their environment is of increasing importance in T cell physiology. However, initial studies in this direction focused on planar hydrogel and elastomer surfaces, presenting several challenges in interpretation including difficulties in separating mechanical stiffness from changes in chemistry needed to modulate this property. We introduce here the use of magnetic fields to change the structural rigidity of microscale elastomer pillars loaded with superparamagnetic nanoparticles, independent of substrate chemistry. This magnetic modulation of rigidity, embodied as the pillar spring constant, changed the interaction of mouse naïve CD4 + T cells from a contractile morphology to one involving deep embedding into the array. Furthermore, increasing spring constant was associated with higher IL-2 secretion, showing a functional impact on mechanosensing. The system introduced here thus separates local substrate stiffness and long-range structural rigidity, revealing new facets of T cell interaction with their environment.

60 APPLIED LIFE SCIENCES↗

SELF-GRAVITATING BODY WITH AN INTERNAL MAGNETIC FIELD. I. NEW ANALYTICAL EQUILIBRIA

We construct exact analytical solutions of the equations describing the equilibrium of a self-gravitating magnetized fluid body, possibly rigidly rotating, by superposing two solutions of finite energy defined in the whole space, one describing a non-magnetized gravitating equilibrium (ST1) and the other describing a magnetized non-gravitating equilibrium (ST2). A large number of ST1s can be found in the literature and directly used for our constructions, and we thus concentrate on ST2s, which are difficult to obtain. We derive some of their general properties and exhibit two explicit classes of axisymmetric 'elementary' such equilibria. The first one is extracted from the stellar models proposed by Prendergast and by Kutvitskii and Solov'ev, respectively. The second one is constructed by using Palumbo's theory of isodynamic equilibria, for which the magnetic pressure is constant on each flux surface. Both types of ST2s have their magnetic field confined within a bounded region, respectively, of spherical and toroidal shapes. A much more general ST2 can be obtained by juxtaposing n+q elementary ST2s, with n of the first type and q of the second type, in such a way that the magnetic regions do not pairwise overlap. The specific equilibria we obtain by superposition thus have no external field extending to infinity, and may be three dimensional (3D), which invalidates a recent nonexistence conjecture. Moreover, they may be arranged to contain force-free regions. Our superposition method can be considered as a 3D generalization of the axisymmetric splitting method previously developed by Kutvitskii and Solov'ev.

79 ASTRONOMY AND ASTROPHYSICS↗

Scissors modes of a Bose-Einstein condensate in a synthetic magnetic field

We study the scissors modes of a harmonically trapped Bose-Einstein condensate under the influence of a synthetic magnetic field, which induces rigid rotational components in the velocity field. Our investigation reveals that the scissors mode, excited in the plane perpendicular to the synthetic magnetic field, becomes coupled to the quadrupole modes of the condensate, giving rise to typical beating effects. Moreover, the two scissors modes excited in the vertical planes are also coupled together by the synthetic magnetic field, resulting in intriguing gyroscope dynamics. Our analytical results, derived from a spinor hydrodynamic theory, are further validated through numerical simulations of the three-dimensional Gross-Pitaevskii equation. These predictions for the condensates subject to a synthetic magnetic field are experimentally accessible with current cold-atom setups and hold promise for potential applications in quantum sensing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗