Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC INSTRUMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Using motional Stark splitting of D$_α$ emission to constrain MHD equilibrium analysis in DIII-D plasmas

Herein we report tests of an alternate technique for constraining MHD equilibrium analysis in tokamak plasmas using internal magnetic field measurements based on |$B$| measurements from the motional Stark splitting of D$_α$ spectral lines emitted by a neutral heating beam (MSE-LS). We compare results using MSE-LS with those of the standard equilibrium analysis technique based on line polarization of the D$_α$ emission (MSE-LP). An alternative to MSE-LP is needed in future devices such as ITER where MSE-LP will be difficult due to a plasma-induced coating of the first optical element. The tests utilized data from 10 DIII-D shots with 7 MSE-LS and 14 MSE-LP views covering a range of radii along the outer midplane of the plasma. Seven MSE-LS measurements can contribute significantly to the equilibrium reconstruction of pressure and q profiles using both synthetic and experimental DIII-D MSE-LS data. For example, 7 MSE-LS plus seven MSE-LP measurements give a fit quality that is as good as the same cases with 14 MSE-LP measurements. Analyzing synthetic data for 14 MSE-LS measurements shows significant improvement in fitting quality over the case with 7 MSE-LS locations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

STUDY OF THE 3D GEOMETRIC STRUCTURE AND TEMPERATURE OF A CORONAL CAVITY USING THE LIMB SYNOPTIC MAP METHOD

We present the three-dimensional geometric structure and thermal properties of a coronal cavity deduced from limb synoptic maps. The observations are extreme ultraviolet images from the Atmospheric Imager Assembly (AIA) and magnetic images from the Helioseismic Magnetic Imager instruments on board the Solar Dynamics Observatory. We describe a limb synoptic-map method used to effectively identify and measure cavities from annuli of radiance above the solar limb. We find that cavities are best seen in the 211, 193, and 171 Å passbands. The prominence associated with each cavity is best seen in the 304 Å synoptic maps. We also estimate the thermal properties of the cavity and surrounding plasma by combining the AIA radiances with a differential emission measure analysis. This paper focuses on one long cavity from a catalog of coronal cavities that we are developing. Cavities in this catalog are designated by a coded name using the Carrington Rotation number and position. Cavity C211347177N was observed during Carrington Rotation 2113 at the northwestern limb of the solar disk with an average latitude of 47° N and a central longitude of 177°. We showed the following. (1) The cavity is a long tube with an elliptical cross-section with ratios of the length to width and the length to height of 11:1 and 7:1, respectively. (2) The cavity is about 1360 Mm long, or 170° in longitude. (3) It is tilted in latitude. (4) And it is slightly hotter than its surroundings.

79 ASTRONOMY AND ASTROPHYSICS↗

High-Speed Active Integrators for Magnetic Probes

This report discusses a low cost, easy to develop instrument to measure magnetic fields in pulsed solenoids used for the MagNIF pulse power system. The instrument is designed to integrate voltage signals from custom B-dot probes made from PCB inductor chips. The instrument is battery powered with ± 9V rails. Acceptable B-dot probe inputs range from mV to 20V with frequencies up to 4MHz. Details of the circuit design and practical considerations for working with high speed signals are discussed.

42 ENGINEERING↗

Fourier-Transform ion cyclotron mass spectrometry (FT-ICR MS)

FT-ICR MS achieves the highest resolution and best mass measurement accuracy of any mass spectrometry method. These remarkable achievements are due to several factors, including multi-channel detection, measurement of frequency, magnetic field stability, and dependence of cyclotron frequency on only the magnetic field and ion mass to charge ratio, not on ion kinetic energy and other factors. Significant advances in magnet technology, instrument design and construction continue to enhance the capabilities of FT-ICR MS. FT-ICR has been applied to a variety of analytical challenges and is particularly suited to the analysis of complex mixtures and in applications where high resolution and mass measurement accuracy are critical analytical parameters.

Robinson, Errol W.↗

Generation Process of Large-Amplitude Upper-Band Chorus Emissions Observed by Van Allen Probes

In this paper, we analyze large-amplitude upper-band chorus emissions measured near the magnetic equator by the Electric and Magnetic Field Instrument Suite and Integrated Science instrument package on board the Van Allen Probes. In setting up the parameters of source electrons exciting the emissions based on theoretical analyses and observational results measured by the Helium Oxygen Proton Electron instrument, we calculate threshold and optimum amplitudes with the nonlinear wave growth theory. We find that the optimum amplitude is larger than the threshold amplitude obtained in the frequency range of the chorus emissions and that the wave amplitudes grow between the threshold and optimum amplitudes. Finally, in the frame of the wave growth process, the nonlinear growth rates are much greater than the linear growth rates.

79 ASTRONOMY AND ASTROPHYSICS↗

Infrared imaging systems for wall protection in the W7-X stellarator (invited)

Here, Wendelstein 7-X aims at quasi-steady state operation with up to 10 MW of heating power for 30 min. Power exhaust will be handled predominantly via 10 actively water cooled CFC (carbon-fiber-reinforced carbon) based divertor units designed to withstand power loads of 10 MW/m 2 locally in steady state. If local loads exceed this value, a risk of local delamination of the CFC and failure of entire divertor modules arises. Infrared endoscopes to monitor all main plasma facing components are being prepared, and near real time software tools are under development to identify areas of excessive temperature rise, to distinguish them from non-critical events, and to trigger alarms. Tests with different cameras were made in the recent campaign. Long pulse operation enforces additional diagnostic design constraints: for example, the optics need to be thermally decoupled from the endoscope housing. In the upcoming experimental campaign, a graphite scraper element, in front of the island divertor throat, will be tested as a possible means to protect the divertor pumping gap edges during the transient discharge evolution.

47 OTHER INSTRUMENTATION↗

HELIOSEISMOLOGY OF A REALISTIC MAGNETOCONVECTIVE SUNSPOT SIMULATION

We compare helioseismic travel-time shifts measured from a realistic magnetoconvective sunspot simulation using both helioseismic holography and time-distance helioseismology, and measured from real sunspots observed with the Helioseismic and Magnetic Imager instrument on board the Solar Dynamics Observatory and the Michelson Doppler Imager instrument on board the Solar and Heliospheric Observatory. We find remarkable similarities in the travel-time shifts measured between the methodologies applied and between the simulated and real sunspots. Forward modeling of the travel-time shifts using either Born or ray approximation kernels and the sound-speed perturbations present in the simulation indicates major disagreements with the measured travel-time shifts. These findings do not substantially change with the application of a correction for the reduction of wave amplitudes in the simulated and real sunspots. Overall, our findings demonstrate the need for new methods for inferring the subsurface structure of sunspots through helioseismic inversions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

COMPARATIVE MORPHOLOGY OF SOLAR RELATIVISTIC PARTICLE EVENTS

Time profiles of the 0.25–10 MeV electrons and the ∼(0.1–1) GeV nucleon{sup −1} protons and helium associated with two solar coronal mass ejections (CMEs) are analyzed with a newly formulated method based on modeling of the particle transport in the interplanetary medium. With the modeling, we fit the observed angular distribution of solar particles and infer, for a particular particle instrument and magnetic field orientation, the time delay of the particle registration at 1 AU in respect to the solar source. Then, after the time offset removal, intensity re-normalization and background equalization, the time–intensity profiles of high-energy protons, helium and electrons in different energy channels are superposed and compared. The comparison reveals episodes of remarkable coincidence of different profiles, as well as episodes of essentially different behavior. It implies at least three sources of solar high-energy particles operating in a single event. The first, short-duration source emits electrons next to the flare's impulsive phase and CME liftoff. The second source gradually rises and continues for more than an hour, emitting electrons and lower energy protons, which is consistent with shock acceleration on open magnetic field lines extending to solar wind. An another, third source is the main source of relativistic ions in space. It is retarded in respect to the flare's impulsive phase and may be associated with a structure encountered by the shock within a few solar radii from the Sun.

79 ASTRONOMY AND ASTROPHYSICS↗

Harmonic distortion analyzer speeds setup of magnetic tape recorders

Harmonic distortion analyzer effects rapid and accurate setup and calibration of magnetic tape instrumentation recorders. The analyzer is portable, requires no warmup period and need not be calibrated for normal usage. Average setup time with this analyzer is approximately 30 seconds per track.

Tinari, D. F.↗

Surveyor results.

Surveyor lunar scientific payload and results, discussing TV camera, soil mechanics and surface sampler, alpha scattering instrument, small magnets and surface analysis

Hibbs, A. R.↗

A two-spacecraft test of a single spacecraft method of estimating shock normals

By assuming the validity of a subset of the Rankine-Hugoniot conservation relations for interplanetary (IP) shocks in an isotropic medium it has been demonstrated, in principle, that improved shock normals can be calculated by using a least-squares technique on combined magnetic field and plasma data from a single spacecraft. The scheme uses those six conservation relations not involving pressure and temperature. This paper deals with a test of the scheme by examining in detail a shock across which the magnetic field changed direction by a small amount (approximately 10 deg). On January 26, 1968 at about 1430 UT this shock was observed by the plasma and magnetic field instruments in Explorers 33 and 35. The spacecraft were 76.6 and 56.9 R sub E sunward of the earth, respectively (and 43.5 R sub E from each other), and therefore well outside the earth's bow shock region, a necessary condition for a valid test.

Lepping, R. P.↗

Magnetic fields experiment

The Explorer 45 magnetic fields instruments were designed, constructed, and tested; research in the program is summarized.

Cahill, L. J., Jr.↗