SEARCH · Engineering Papers

Results for “Level Of Conservation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1972

A self-consistent model for Jupiter's radiation belts

The solar wind is assumed to be a sufficient source for the radiation belts of Jupiter, with radial diffusion as the process for getting the solar wind fluxes into the inner regions of the radiation belts. The process of a radial diffusion source is combined with pitch-angle diffusion losses to estimate an upper limit to the proton and electron fluxes. The upper limit to the integral proton and electron fluxes in the outer zone scale as L to the -6th power throughout the outer zone, assuming that the magnetic moment is conserved. It is important that these fluxes are above the stably trapped flux levels in the outer regions of the belts; the instability will work because the energies of the particles are above the critical value required.

Thorne, R. M.↗

NASA NTRS1985

New integration techniques for chemical kinetic rate equations. 2: Accuracy comparison

A comparison of the accuracy of several techniques recently developed for solving stiff differential equations is presented. The techniques examined include two general purpose codes EEPISODE and LSODE developed for an arbitrary system of ordinary differential equations, and three specialized codes CHEMEQ, CREKID, and GCKP84 developed specifically to solve chemical kinetic rate equations. The accuracy comparisons are made by applying these solution procedures to two practical combustion kinetics problems. Both problems describe adiabatic, homogeneous, gas phase chemical reactions at constant pressure, and include all three combustion regimes: induction, heat release, and equilibration. The comparisons show that LSODE is the most efficient code - in the sense that it requires the least computational work to attain a specified accuracy level. An important finding is that an iterative solution of the algebraic enthalpy conservation equation for the temperature can be more accurate and efficient than computing the temperature by integrating its time derivative.

Radhakrishnan, K.↗

NASA NTRS1985

A fast, time-accurate unsteady full potential scheme

The unsteady form of the full potential equation is solved in conservation form by an implicit method based on approximate factorization. At each time level, internal Newton iterations are performed to achieve time accuracy and computational efficiency. A local time linearization procedure is introduced to provide a good initial guess for the Newton iteration. A novel flux-biasing technique is applied to generate proper forms of the artificial viscosity to treat hyperbolic regions with shocks and sonic lines present. The wake is properly modeled by accounting not only for jumps in phi, but also for jumps in higher derivatives of phi, obtained by imposing the density to be continuous across the wake. The far field is modeled using the Riemann invariants to simulate nonreflecting boundary conditions. The resulting unsteady method performs well which, even at low reduced frequency levels of 0.1 or less, requires fewer than 100 time steps per cycle at transonic Mach numbers. The code is fully vectorized for the CRAY-XMP and the VPS-32 computers.

Shankar, V.↗

NASA NTRS1986

New integration techniques for chemical kinetic rate equations. II - Accuracy comparison

A comparison of the accuracy of several techniques recently developed for solving stiff differential equations is presented. The techniques examined include two general purpose codes EEPISODE and LSODE developed for an arbitrary system of ordinary differential equations, and three specialized codes CHEMEQ, CREKID, and GCKP84 developed specifically to solve chemical kinetic rate equations. The accuracy comparisons are made by applying these solution procedures to two practical combustion kinetics problems. Both problems describe adiabatic, homogeneous, gas phase chemical reactions at constant pressure, and include all three combustion regimes: induction heat release, and equilibration. The comparisons show that LSODE is the most efficient code - in the sense that it requires the least computational work to attain a specified accuracy level. An important finding is that an iterative solution of the algebraic enthalpy conservation equation for the temperature can be more accurate and efficient than computing the temperature by integrating its time derivative.

Radhakrishnan, K.↗

NASA NTRS2015

Recommendations on Future Science and Engineering Studies for Ocean Color

The Ocean Health Index measured Ecological Integrity as the relative condition of assessed species in a given location. This was calculated as the weighted sum of the International Union for Conservation of Natures (IUCN) assessments of species. Weights used were based on the level of extinction risk following Butchart et al.2007: EX (extinct) 0.0, CR (critically endangered) 0.2, EN (endangered) 0.5, VU (vulnerable) 0.7, NT (not threatened) 0.9, and LC (least concern) 0.99. For primarily coastal goals, the spatial average of these per pixel scores was based on a 3nmi buffer; for goals derived from all ocean waters, the spatial average was computed for the entire EEZ.

Geo-Cape↗

NASA NTRS2007

An Investigation of High-Cycle Fatigue Models for Metallic Structures Exhibiting Snap-Through Response

A study is undertaken to develop a methodology for determining the suitability of various high-cycle fatigue models for metallic structures subjected to combined thermal-acoustic loadings. Two features of this problem differentiate it from the fatigue of structures subject to acoustic loading alone. Potentially large mean stresses associated with the thermally pre- and post-buckled states require models capable of handling those conditions. Snap-through motion between multiple post-buckled equilibrium positions introduces very high alternating stress. The thermal-acoustic time history response of a clamped aluminum beam structure with geometric and material nonlinearities is determined via numerical simulation. A cumulative damage model is employed using a rainflow cycle counting scheme and fatigue estimates are made for 2024-T3 aluminum using various non-zero mean fatigue models, including Walker, Morrow, Morrow with true fracture strength, and MMPDS. A baseline zero-mean model is additionally considered. It is shown that for this material, the Walker model produces the most conservative fatigue estimates when the stress response has a tensile mean introduced by geometric nonlinearity, but remains in the linear elastic range. However, when the loading level is sufficiently high to produce plasticity, the response becomes more fully reversed and the baseline, Morrow, and Morrow with true fracture strength models produce the most conservative fatigue estimates.

Przekop, Adam↗

NASA NTRS1978

Review of JPL Automotive Technology Status and Projections (ATSP) project

The general objective was to make a continuing assessment of current automotive technology development programs and of the prospects for new concepts. The study embraced alternative engines, advanced powertrain components, and related energy conserving vehicle modifications which could be implemented by the end of this century. Vehicle level projections of the fuel economy and emissions potential of alternative power systems were key elements of this assessment.

Dowdy, M. W.↗

NASA NTRS1980

The coupled effects of chemistry and diffusion on the stratospheric ozone reduction

The effect of diffusive-mixing on O3-depletion is estimated using the five-step chemistry model. The coupled treatment uses an equilibrium turbulence field and retains the key features of the kinetics while keeping the chemistry simple. Results indicate that those calculations of Hilst and Donaldson (1973) employing the conservation of NO2/NO will yield erroneous results, and it is found that any significant level of turbulence will reduce the severity of the NOx catalytic cycle for O3 destruction.

Gupta, R. N.↗

NASA NTRS2001

Left ventricular endocardial surface detection based on real-time 3D echocardiographic data

OBJECTIVE: A new computerized semi-automatic method for left ventricular (LV) chamber segmentation is presented. METHODS: The LV is imaged by real-time three-dimensional echocardiography (RT3DE). The surface detection model, based on level set techniques, is applied to RT3DE data for image analysis. The modified level set partial differential equation we use is solved by applying numerical methods for conservation laws. The initial conditions are manually established on some slices of the entire volume. The solution obtained for each slice is a contour line corresponding with the boundary between LV cavity and LV endocardium. RESULTS: The mathematical model has been applied to sequences of frames of human hearts (volume range: 34-109 ml) imaged by 2D and reconstructed off-line and RT3DE data. Volume estimation obtained by this new semi-automatic method shows an excellent correlation with those obtained by manual tracing (r = 0.992). Dynamic change of LV volume during the cardiac cycle is also obtained. CONCLUSION: The volume estimation method is accurate; edge based segmentation, image completion and volume reconstruction can be accomplished. The visualization technique also allows to navigate into the reconstructed volume and to display any section of the volume.

Non-NASA Center↗

NASA NTRS2000

Hydrological Balance in Tropical Cyclones with Scatterometer and TRMM Data

Precipitation over oceans can be estimated from the radar and the microwave radiometer of the Tropical Rain Measuring Mission (TRMM). It can also be estimated from the divergence of the vertically integrated water vapor transport, through the conservation principle, assuming evaporation is relatively small. In tropical cyclones, the divergence of vertically integrated water vapor is highly dependent on the vertical transport and, therefore, on the wind divergence. Spaceborne scatterometers provide surface wind velocity and, therefore, surface wind divergence at spatial resolutions that are much higher than products of numerical weather prediction (NWP). In this study, ocean surface winds derived from the observations of space-based scatterometers and surface precipitation measured by TRMM were objectively interpolated to the same time and location during the passage of a tropical cyclone. Surface precipitation distribution was derived from wind and humidity profiles provided by NWP. When the surface level winds of NWP were replaced by the scatterometer winds, the surface precipitation patterns computed with the conservation method were found to be significantly changed and the new patterns are much closer in agreement with the patterns observed by TRMM.

Liu, W. Timothy↗

NASA NTRS2000

Oceanic Excitation of Polar Motion During 1992-1994

Two global ocean general circulation models have been used to compute the angular momentum of nontidal oceanic current and sea level height variations: (1) the Princeton Modular Ocean Model (MOM) having 22 vertical layers and a rigid lid, and (2) the Miami Isopycnic-Coordinate Ocean Model (MICOM) having 11 vertical layers with a mixed layer and a free surface. Both models were run on the same 2 degree longitude by 1 degree latitude grid spanning 80 S to 80 N latitude. Following a 10-year spin-up with climatological air-sea fluxes, both models were forced during 1992-1994 with daily wind and heat flux from the NCEP operational analysis and sea surface salinity restoring to Levitus climatology. After correcting for the effects of mass non-conservation in these models, they are shown to predict similar effects on polar motion excitation of sea level height variations, but the effect of currents predicted by MOM is much larger than that predicted by MICOM.

Gross, R.↗

NASA NTRS1980

Status of linear boundary-layer stability and the e to the nth method, with emphasis on swept-wing applications

The-state-of-the-art for the application of linear stability theory and the e to the nth power method for transition prediction and laminar flow control design are summarized, with analyses of previously published low disturbance, swept wing data presented. For any set of transition data with similar stream distrubance levels and spectra, the e to the nth power method for estimating the beginning of transition works reasonably well; however, the value of n can vary significantly, depending upon variations in disturbance field or receptivity. Where disturbance levels are high, the values of n are appreciably below the usual average value of 9 to 10 obtained for relatively low disturbance levels. It is recommended that the design of laminar flow control systems be based on conservative estimates of n and that, in considering the values of n obtained from different analytical approaches or investigations, the designer explore the various assumptions which entered into the analyses.

Hefner, J. N.↗

NASA NTRS1980

Stratum variance estimation for sample allocation in crop surveys

The problem of determining stratum variances needed in achieving an optimum sample allocation for crop surveys by remote sensing is investigated by considering an approach based on the concept of stratum variance as a function of the sampling unit size. A methodology using the existing and easily available information of historical crop statistics is developed for obtaining initial estimates of tratum variances. The procedure is applied to estimate stratum variances for wheat in the U.S. Great Plains and is evaluated based on the numerical results thus obtained. It is shown that the proposed technique is viable and performs satisfactorily, with the use of a conservative value for the field size and the crop statistics from the small political subdivision level, when the estimated stratum variances were compared to those obtained using the LANDSAT data.

Perry, C. R., Jr.↗

NASA NTRS1981

CF 6 engine diagnostics

A summary of the activities which led to defining deterioration rates of the CF6 family of engines, a description of what was learned, and an identification of means of conserving fuel based upon the program findings are presented. The program to define the deterioration levels and modes for the CF6 family of engines involved four distinct phases: analysis of inbound engine test results, analysis of airline cruise data, analysis of airline test cell data resulting from testing of refurbished engines, and inspection of engine hardware.

Stricklin, R.↗

NASA NTRS1987

An evaluation of the communication system for the TAU mission study

The requirements for possible microwave and optical frequency communication systems to return 20 kbps from 1000 AU are compared and sample telemetry links are calculated. Microwave systems were found to have impractical parameter requirements, while the required optical system parameters are much more feasible. A first-level design of an optical communication link is presented; this design can be implemented with conservatively projected technology development. Optical background noise can be either tolerated or eliminated and it was found that TAU could detect a laser beacon from Earth even if Earth were in front of the Sun.

Metscher, B. D.↗

NASA NTRS2000

Operational Implementation of a 2-Hour Prebreathe Protocol for International Space Station

Procedures, equipment, and analytical techniques were developed to implement the ground tested 2-hour protocol in-flight operations. The methods are: 1) The flight protocol incorporates additional safety margin over the ground tested protocol. This includes up to 20 min of additional time on enriched O2 during suit purge and pressure check, increased duration of extravehicular activity (EVA) preparation exercise during O2 prebreathing (up to 90 min vs; the tested 24 min), and reduced rates of depressurization. The ground test observations were combined with model projections of the conservative measures (using statistical models from Duke University and NASA JSQ to bound the risk of Type I and Type II decompression sickness (DCS). 2) An inflight exercise device using the in-flight ergometer and elastic tubes for upper body exercise was developed to replicate the dual cycle exercise in the ground trials. 3) A new in-flight breathing system was developed and man-tested. 4) A process to monitor inflight experience with the protocol, including the use of an in-suit Doppler bubble monitor when available, was developed. The results are: 1) The model projections of the conservative factors of the operational protocol were shown to reduce the risk of DCS to levels consistent with the observations of no DCS to date in the shuttle program. 2) Cross over trials of the dual cycle ergometer used in ground tests and the in-flight exercise system verified that02consumption and the % division of work between upper and lower body was not significantly different at the p= 0.05 level. 3) The in-flight breathing system was demonstrated to support work rates generating 75% O2(max) in 95 percentile subjects. 4) An in-flight monitoring plan with acceptance criteria was put in place for the 2-hour prebreathe protocol. And the conclusions are: The 2-hour protocol has been approved for flight, and all implementation efforts are in place to allow use of the protocol as early as flight ISS 7A, now scheduled in November of 2000.

Waligora, James M.↗

NASA NTRS1997

Conserved gene clusters in bacterial genomes provide further support for the primacy of RNA

Five complete bacterial genome sequences have been released to the scientific community. These include four (eu)Bacteria, Haemophilus influenzae, Mycoplasma genitalium, M. pneumoniae, and Synechocystis PCC 6803, as well as one Archaeon, Methanococcus jannaschii. Features of organization shared by these genomes are likely to have arisen very early in the history of the bacteria and thus can be expected to provide further insight into the nature of early ancestors. Results of a genome comparison of these five organisms confirm earlier observations that gene order is remarkably unpreserved. There are, nevertheless, at least 16 clusters of two or more genes whose order remains the same among the four (eu)Bacteria and these are presumed to reflect conserved elements of coordinated gene expression that require gene proximity. Eight of these gene orders are essentially conserved in the Archaea as well. Many of these clusters are known to be regulated by RNA-level mechanisms in Escherichia coli, which supports the earlier suggestion that this type of regulation of gene expression may have arisen very early. We conclude that although the last common ancestor may have had a DNA genome, it likely was preceded by progenotes with an RNA genome.

Non-NASA Center↗

NASA NTRS2000

Magnetic Flux Compression Concept for Aerospace Propulsion and Power

The objective of this research is to investigate system level performance and design issues associated with magnetic flux compression devices for aerospace power generation and propulsion. The proposed concept incorporates the principles of magnetic flux compression for direct conversion of nuclear/chemical detonation energy into electrical power. Specifically a magnetic field is compressed between an expanding detonation driven diamagnetic plasma and a stator structure formed from a high temperature superconductor (HTSC). The expanding plasma cloud is entirely confined by the compressed magnetic field at the expense of internal kinetic energy. Electrical power is inductively extracted, and the detonation products are collimated and expelled through a magnetic nozzle. The long-term development of this highly integrated generator/propulsion system opens up revolutionary NASA Mission scenarios for future interplanetary and interstellar spacecraft. The unique features of this concept with respect to future space travel opportunities are as follows: ability to implement high energy density chemical detonations or ICF microfusion bursts as the impulsive diamagnetic plasma source; high power density system characteristics constrain the size, weight, and cost of the vehicle architecture; provides inductive storage pulse power with a very short pulse rise time; multimegajoule energy bursts/terawatt power bursts; compact pulse power driver for low-impedance dense plasma devices; utilization of low cost HTSC material and casting technology to increase magnetic flux conservation and inductive energy storage; improvement in chemical/nuclear-to-electric energy conversion efficiency and the ability to generate significant levels of thrust with very high specific impulse; potential for developing a small, lightweight, low cost, self-excited integrated propulsion and power system suitable for space stations, planetary bases, and interplanetary and interstellar space travel; potential for attaining specific impulses approaching 10 (exp 6) seconds, which would enable missions to the outer planets within ten years and missions at interstellar distances within fifty years.

Litchford, Ron J.↗