Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Layer-structured triple-conducting electrocatalyst for water-splitting in protonic ceramic electrolysis cells: Conductivities vs. activity

Electron, proton and oxygen-triple-conducting materials are becoming the dominant steam electrode candidate to break the rate limit on the water-splitting reaction that throttles the performance of protonic ceramic electrolysis cells (PCECs). In this study, based on Pr 2 NiO 4+δ Ruddlesden-Popper phase, we manipulate these conductivities by Pr-site Ba substitution to probe the correlation of each conductivity with the kinetics of the elementary reaction steps. It is found that the proton conductivity is vital to sustain an extended active surface area for faster adsorption of reactants and desorption of products. The effect of oxygen conductivity is surprisingly found insignificant in the water-splitting reaction. On the contrary, surface oxygen removal is discovered as the most rate-limiting process. The electronic conductivity is not a direct limiting factor. However, an electron transfer process between the current collector and the electrode junction could introduce extra resistance that is perceptible at a high operating temperature range. The best water-splitting activity is obtained on a proton conductivity/oxygen surface desorption capability well-balanced sample after Ba substitution. As a result, a water-splitting reaction resistance of 0.022 Ωcm 2 , a current density of 1.96 A/cm 2 at 700 °C is achieved on Pr 1.7 Ba 0.3 NiO 4+δ , one of the best performances for PCECs.

25 ENERGY STORAGE↗
DOE OSTI2014

Study of Maxwell–Wagner (M–W) relaxation behavior and hysteresis observed in bismuth titanate layered structure obtained by solution combustion synthesis using dextrose as fuel

Graphical abstract: X-ray diffraction studies show that phase formation and crystallinity was reached only after calcinations at 800 °C. Dielectric constant versus temperature curve shows ferroelectric to paraelectric transition temperature (T{sub c}) to be 650 °C. Complex impedance curves show deviation from Debye behavior. The material shows a thin PE Loop with low remnant polarization due to high conductivity in the as prepared sample. - Highlights: • Bi{sub 4}Ti{sub 3}O{sub 12} is synthesized using solution combustion technique with dextrose as fuel. • Dextrose has high reducing capacity (+24) and generates more no. of moles of gases. • Impedance studies show that the sample follows Maxwell–Wagner relaxation behavior. • Shows lower remnant polarization due to higher c-axis ratio. - Abstract: Structural, dielectric and ferroelectric properties of bismuth titanate (Bi{sub 4}Ti{sub 3}O{sub 12}) obtained by solution combustion technique using dextrose as fuel is studied extensively in this paper. Dextrose is used as fuel as it has high reducing valancy and generates more number of moles of gases during the reaction. X-ray diffraction studies show that phase formation and crystallinity was reached only after calcinations at 800 °C. Dielectric constant versus temperature curve shows ferroelectric to paraelectric transition temperature (T{sub c}) to be 650 °C. The dielectric loss is very less (tan δ < 1) at lower temperatures but increases around T{sub c} due to structural changes in the sample. Complex impedance curves show deviation from Debye behavior. The material shows a thin PE Loop with low remnant polarization due to high conductivity in the as prepared sample.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Molecular Investigation of Oxidized Graphene: Anatomy of the Double-Layer Structure and Ion Dynamics

We investigated the influence of surface oxidization of planar graphene electrodes on charge storage and ion dynamics of supercapacitors. Our approach compared two distinct ionic liquid (IL) electrolytes: tetraethylammonium tetrafluoroborate solvated in acetonitrile (TEA-BF4/ACN) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide solvated in acetonitrile (EMIm-TFSI/ACN). Both experimental electrochemical tests and molecular dynamics (MD) simulations showed positive, electrolyte-specific influences of hydroxyl-free electrode interfaces on capacitance. In the EMIm-TFSI/ACN system, the hydroxylated surface, because of its strong interaction with anions, impeded surface charge storage. On the other hand, in the case of TEA-BF4/ACN, the distribution and orientation of ACN across the system exerted vital influence on the capacitance, especially on the positive hydroxyl-free electrode. Furthermore, MD simulations of ion mobility with respect to the electrode surface in the lateral and perpendicular directions revealed significantly slower diffusion performance on the oxidized surface. Our efforts enhanced the level of fundamental understanding of the effects of hydroxyl groups on electrode–electrolyte interfaces and resulting supercapacitor performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Switching of perpendicular exchange bias in Pt/Co/Pt/α-Cr{sub 2}O{sub 3}/Pt layered structure using magneto-electric effect

Switching of the perpendicular exchange bias polarity using a magneto-electric (ME) effect of α-Cr{sub 2}O{sub 3} was investigated. From the change in the exchange bias field with the electric field during the ME field cooling, i.e., the simultaneous application of both magnetic and electric fields during the cooling, we determined the threshold electric field to switch the perpendicular exchange bias polarity. It was found that the threshold electric field was inversely proportional to the magnetic field indicating that the EH product was constant. The high EH product was required to switch the exchange bias for the film possessing the high exchange anisotropy energy density, which suggests that the energy gain by the ME effect has to overcome the interfacial exchange coupling energy to reverse the interfacial antiferromagnetic spin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Anti-Icing Coatings using Ionomer Film Layer Structuring

This research effort examined the application of Nafion polymers in alcohol solvents as an anti-ice surface coating, as a mixture with hydrophilic polymers and freezing point depressant salt systems. Co-soluble systems of Nafion, polymer and salt were applied using dip coating methods to create smooth films for frost observation over a Peltier plate thermal system in ambient laboratory conditions. Cryo-DSC was applied to examine freezing events of the Nafion-surfactant mixtures, but the sensitivity of the measurement was insufficient to determine frost behavior. Collaborations with the Fog Chamber at Sandia-Albuquerque, and in environmental SAXS measurements with CINT-LANL were requested but were not able to be performed under the research duration. Since experimental characterization of these factors is difficult to achieve directly, computational modeling was used to guide the scientific basis for property improvement. Computational modeling was performed to improve understanding of the dynamic association between ionomer side groups and added molecules and deicing salts. The polyacrylic acid in water system was identified at the start of the project as a relevant system for exploring the effect of varying counterions on the properties of fully deprotonated polyacrylic acid (PAA) in the presence of water. Simulations were modeled with four different counterions, two monovalent counterions (K+ and Na+) and two divalent counterions (Ca2+ and Mg2+). The wt% of PAA in these systems was varied from ~10 to 80 wt% PAA for temperatures from 250K to 400K. In the second set of simulations, the interpenetration of water into a dry PAA film was studied for Na+ or Ca2+ counterions for temperatures between 300K and 400K. The result of this project is a sprayable Nafion film composite which resists ice nucleation at -20 °C for periods of greater than three hours. It is composed of Nafion polymer, hydrophilic polyethylene oxide polymer and CaCl2 anti-ice crosslinker. Durability and field performance properties remain to be determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Method for fabrication of superlattices and aperiodic layered structures using solution deposition

A method for forming inorganic structures includes (a) transferring nanocrystals to a polar protic solvent using at least one chalcogenide precursor to produce a negatively-charged chalcogen-rich nanocrystal surface, (b) removing excess anions of the chalcogenide precursor, (c) introducing a metal salt to bind a divalent metal cation to the negatively-charged chalcogen-rich nanocrystal surface to regenerate a positively-charged metal-rich nanocrystal surface, and (d) removing excess divalent metal cations of the metal acetate salt.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Two-Dimensional Layered Oxide Structures Tailored by Self-Assembled Layer Stacking via Interfacial Strain

Two-dimensional (2D) nanostructures emerge as one of leading topics in fundamental materials science and could enable next generation nanoelectronic devices. Beyond graphene and molybdenum disulphide, layered complex oxides are another large group of promising 2D candidates because of their strong interplay of intrinsic charge, spin, orbital and lattice. As a fundamental basis of heteroepitaxial thin film growth, interfacial strain can be used to design materials exhibiting new phenomena beyond their conventional form. Here we report the strain-driven self-assembly of Bismuth-based supercells (SC) with a 2D layered structure, and elucidate the fundamental growth mechanism with combined experimental tools and first-principles calculations. The study revealed that the new layered structures were formed by the strain-enabled self-assembled atomic layer stacking, i.e., alternative growth of Bi 2 O 2 layer and [Fe 0.5 Mn 0.5 ]O 6 layer. The strain-driven approach is further demonstrated in other SC candidate systems with promising room-temperature multiferroic properties. This well-integrated theoretical and experimental study inspired by the Materials Genome Initiatives opens up a new avenue in searching and designing novel 2D layered complex oxides with enormous promises.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗