Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Launching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

First Demonstration of Resonant Pitch-Angle Scattering of Relativistic Electrons by Externally Launched Helicon Waves

Helicon waves (a.k.a whistler waves) satisfying the normal wave-particle cyclotron resonance are observed to limit the growth and maximum energy of relativistic electrons (REs) in low-density Ohmic DIII-D tokamak plasmas. Following the application of helicon waves, pitch-angle scattering of high-energy REs causes an increase in both synchrotron and electron-cyclotron emissions. The hard x-ray emission, a proxy for the RE population, ceases to grow. Energy-resolved hard x-ray measurements also show a striking decrease in the number of high-energy REs (above the resonance at approximately 8MeV) to below the noise floor and an increase in low-energy (∼ 4 MeV) REs. This occurs despite the toroidal electric field remaining high enough to drive exponential RE growth in the absence of helicon waves. Furthermore, these results open new directions for limiting the maximum energy of RE populations in laboratory and fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Information Carried by Electromagnetic Radiation Launched from Accelerated Polarization Currents

We show experimentally that a continuous, linear, dielectric antenna in which a superluminal polarization-current distribution accelerates can be used to transmit a broadband signal that is reproduced in a comprehensible form at a chosen target distance and angle. The requirement for this exact correspondence between broadcast and received signals is that each moving point in the polarization-current distribution approaches the target at the speed of light at all times during its transit along the antenna. This results in a one-to-one correspondence between the time at which each point on the moving polarization current enters the antenna and the time at which all of the radiation emitted by this particular point during its transit through the antenna arrives simultaneously at the target. This has the effect of reproducing the desired time dependence of the original broadcast signal. For other observer-detector positions, the time dependence of the signal is scrambled, due to the nontrivial relationship between emission (retarded) time and reception time. This technique represents a contrast to conventional radio transmission methods; in most examples of the latter, signals are broadcast with little or no directivity, selectivity of reception being achieved through the use of narrow frequency bands. In place of this, the current paper uses a spread of frequencies to transmit information to a particular location; the signal is weaker and has a scrambled time dependence elsewhere. Here, we point out the possible relevance of this mechanism to 5G neighborhood networks and pulsar astronomy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Launching and controlling Gaussian beams from point sources via planar transformation media

Based on operations prescribed under the paradigm of Complex Transformation Optics (CTO) [1- 4], it was recently shown in [5] that a complex source point (CSP) can be mimicked by a paritytime transformation media. Such coordinate transformation has a mirror symmetry and results a balanced loss/gain metamaterial slab. A point source placed at the center of such slab produces a Gaussian beam propagating away from the slab surface. Here, we extend the CTO analysis to non-symmetric complex coordinate transformations and show that by using simply a (homogeneous) doubly anisotropic gain-media metamaterial slab, one can still mimic a CSP and produce Gaussian beam. Notably, a Gaussian beam can be produced in this case by point sources placed outside the slab as well. By making use of the extra degrees of freedom provided by CTO, the near-zero requirement on the real part of the resulting constitutive parameters can be relaxed to facilitate potential realization. In addition, exploitation of both real and imaginary parts of the CTO design yield direct control of the Gaussian beam properties such as peak amplitude and waist (focus) location.

74 ATOMIC AND MOLECULAR PHYSICS↗

Multiple Supersonic Phase Fronts Launched at a Complex-Oxide Heterointerface

Selective optical excitation of a substrate lattice can drive phase changes across heterointerfaces. This phenomenon is a nonequilibrium analogue of static strain control in heterostructures and may lead to new applications in optically controlled phase change devices. Here, we make use of time-resolved nonresonant and resonant x-ray diffraction to clarify the underlying physics and to separate different microscopic degrees of freedom in space and time. We also measure the dynamics of the lattice and that of the charge disproportionation in NdNiO 3 , when an insulator-metal transition is driven by coherent lattice distortions in the LaAlO 3 substrate. We find that charge redistribution propagates at supersonic speeds from the interface into the NdNiO 3 film, followed by a sonic lattice wave. Our results establish a hierarchy of events for ultrafast control at complex-oxide heterointerfaces, when combined with measurements of magnetic disordering and of the metal-insulator transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Announcing the launch of Protein Data Bank China as an Associate Member of the Worldwide Protein Data Bank Partnership

The Protein Data Bank (PDB) is the single global archive of atomic-level, three-dimensional structures of biological macromolecules experimentally determined by macromolecular crystallography, nuclear magnetic resonance spectroscopy or three-dimensional cryo-electron microscopy. The PDB is growing continuously, with a recent rapid increase in new structure depositions from Asia. In 2022, the Worldwide Protein Data Bank (wwPDB; https://www.wwpdb.org/) partners welcomed Protein Data Bank China (PDBc; https://www.pdbc.org.cn) to the organization as an Associate Member. PDBc is based in the National Facility for Protein Science in Shanghai which is associated with the Shanghai Advanced Research Institute of Chinese Academy of Sciences, the Shanghai Institute for Advanced Immunochemical Studies and the iHuman Institute of ShanghaiTech University. This letter describes the history of the wwPDB, recently established mechanisms for adding new wwPDB data centers and the processes developed to bring PDBc into the partnership.

59 BASIC BIOLOGICAL SCIENCES↗

NREL Launches Collaborative Resource for Field Test Best Practices [Fact Sheet]

Dynamic portal documents and shares state-of-the-art residential field test tools and techniques. Field testing is a science and an art—a tricky process that develops through a lot of trial and error. Researchers in the Advanced Residential Buildings group at the National Renewable Energy Laboratory (NREL) regularly conduct field experiments and long-term monitoring in occupied and unoccupied houses throughout the United States. The goal is to capture real-world performance of energy-efficient systems, in support of the U.S. Department of Energy’s Building America program. In addition to the technical challenges of making accurate field measurements, NREL researchers realized another problem: the vast body of field test know-how based on years of collective experience is currently scattered throughout the building science community. To address this need, NREL developed the Field Test Best Practices website, a dynamic, collaborative resource that documents practical “lessons from the field” for building scientists nationwide.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Scale-up of Novel Low-Cost Carbon Fibers Leading to High-Volume Commercial Launch

The project started in September, 2012 with the goal of scaling up from the existing laboratory scale process for producing carbon fiber (CF) from polyolefin (PO) based precursor fiber using a Dow proprietary sulfonation-desulfonation stabilization process. The award was used to develop a process that was capable of producing market development quantities of CF from PO precursor fiber at a rate of 4 kg/h of CF. The CF would target properties that met or exceeded the Department of Energy (DOE) Vehicles Technology [1] standard; i.e., 172 GPa modulus and 1.72 GPa strength at greater than or equal to 1% strain. The Dow proprietary process was capable of meeting and exceeding these targets properties. Project DE-EE0005760 resulted from a Collaborative Research and Development Agreement (CRADA) between Dow and Oak Ridge National Laboratory (ORNL) with support from the Michigan Economic Development Corporation (MEDC) and DOE. In the first budget period, the main goal was to design a sulfonation-desulfonation market development plant capable of stabilizing PO precursor fiber at a rate of 5 kg/h using a sulfonation solution. The detailed design, location, and cost estimate were determined as scheduled in the Project Management Plan (PMP). In parallel with this DOE award project was a fundamentals and economic evaluation funded by The Dow Chemical Company (Dow). The goal of the Dow sponsored project was to finalize the mass balances, energy balances, and levelized cost to produce CF using the Dow process. A Go-No-Go decision was scheduled in June, 2013 based on the findings of the DOE sponsored scale up project and the Dow sponsored project. In June, 2013, Dow made the No-Go decision to halt and abandon the Dow proprietary sulfonation-desulfonation process for stabilizing PO precursor fibers for the manufacturing of CF. This No-Go decision was identified in the original proposal and at the start of this project, and the decision was made as scheduled. The decision was based on the high levelized economic cost of the process relative to the manufacture of CF from polyacrylonitrile (PAN) precursor fibers. The capital required to sulfonate the fibers adds a significant cost to the process due to the need for investment in a sulfuric acid recovery plant. This high additional capital over the capital for a PAN based CF plant, reduces the levelized economic cost to slightly advantaged over PAN based CF. The sulfonation-desulfonation stabilization route failed to meet the Dow’s return on investment criterion and the cost advantage target set forth for the DOE project. The DOE and Dow decided to halt spending on the project until a new PO fiber stabilization process could be identified that met the DOE physical properties standard and the levelized economic cost constraints of Dow. When the new technology was developed, then award DE-EE0005760 would be re-started with the same goals of the development of a market development plant capable of producing CF at 4 kg/h with the properties that met or exceed those set forth by the Department of Energy Vehicles Technology standard. Progress on the development of the new process has been slow and thus has delayed the scale up project. Dow’s efforts to date have not progressed to the point of demonstrating a commercially-viable process for production of low cost CF from PO precursors for Dow’s rigorous economic constraints. After extensive discussions within Dow and consultation with DOE’s Advanced Manufacturing Office (AMO) Headquarters and Golden Field Office teams, Dow has decided to proceed with the formal recommendation to terminate subject project. DOE’s AMO Headquarters and Golden Field Office teams agreed with the termination of the project.

36 MATERIALS SCIENCE↗

Lessons in Commercial PACE Leadership: The Path from Legislation to Launch

This resource from the U.S. Department of Energy and Lawrence Berkeley National Laboratory aims to fast track the set-up of commercial property assessed clean energy (C-PACE) programs for state and local governments by capturing the lessons learned from leaders.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Project Liberty: Launch of an Integrated Bio-Refinery with Eco-Sustainable and Renewable Technologies. Conversion of Corn Stover Biomass to Bio-Ethanol, Final Report

POET-DSM Advanced Biofuels, in collaboration with parent companies, POET and DSM, has successfully designed, constructed, and continuously operated Project Liberty, a 770 bone-dry ton per day (tpd) nameplate capacity, 20 million gallon (cellulosic bioethanol) per year demonstration scale integrated biorefinery (IBR). The IBR produced cellulosic bio-ethanol from agriculture waste (corn stover) feedstock using next-generation pretreatment and enzymatic conversion technologies. The IBR plant was built and demonstrated operations in Emmetsburg, Iowa. The schedule for this IBR project is illustrated in Figure E1. Due to uncontrollable market factors and COVID-19 pandemic, cellulosic bioethanol production ceased near the end of 2019 and remaining operations were idled June of 2020.

09 BIOMASS FUELS↗

Userspace Squash Filesystem for Launching Linux Containers on HPC Systems [Thesis]

The demand for user defined software stacks (UDSS) has been increasing in the high-performance computing (HPC) community. Container technology has become popular due to the flexibility and isolation it provides to HPC users. Container images must be available to all nodes involved for use in HPC and can be distributed to compute nodes in a variety of ways. A common method for container image distribution is to simply copy the container image to memory on each compute node, which can be time consuming at scale, and uses valuable memory on each node. The kernel mounted squash filesystem (squashfs) has proven fast and efficient for this task but requires root-level access. This paper will show a user space mounted squashfs is an efficient and secure solution for container image distribution.

97 MATHEMATICS AND COMPUTING↗