Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LINE WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Addressable-Matrix Integrated-Circuit Test Structure

Method of quality control based on use of row- and column-addressable test structure speeds collection of data on widths of resistor lines and coverage of steps in integrated circuits. By use of straightforward mathematical model, line widths and step coverages deduced from measurements of electrical resistances in each of various combinations of lines, steps, and bridges addressable in test structure. Intended for use in evaluating processes and equipment used in manufacture of application-specific integrated circuits.

Sayah, Hoshyar R.↗

High-Resolution Spectroscopy of the Lunar Sodium Exosphere

We have applied high-resolution Fabry-Perot spectroscopy to the study of the lunar sodium exosphere for the study of exospheric effective temperature and velocity variations. Observing from the National Solar Observatory McMath-Pierce Telescope, we used a dual-etalon Fabry-Perot spectrometer with a resolving power of 180,000 to measure line widths and Doppler shifts of the sodium D2 (5889.95 Å) emission line. Our field of view was 360 km, and measurements were made in equatorial and polar regions from 500 km to 3500 km off the limb. Data were obtained from full moon to 3 days following full moon (waning phase) in March 2009. Measured Doppler line widths within 1100 km of the sunlit east and south lunar limbs for observations between 5 and 40 deg lunar phase imply effective temperatures ranging between 3260 +/- 190 and 1000 +/- 135 K. Preliminary line center analysis indicates velocity displacements between different locations off the lunar limb ranging between 100 and 600 m/s from the lunar rest velocity with a precision of +/-20 to +/-50 m/s depending on brightness. Based on the success of these exploratory observations, an extensive program has been initiated that is expected to constrain lunar atmospheric and surface-process modeling and help quantify source and escape mechanisms.

Lunar↗

OH radio observations of Comet Halley

Results of OH observations of P/Halley obtained with the NRAO 43 m antenna between July 1985 and May 1986 are presented. Using Radio Model 1986a, the OH production rate derived from these data follows an rh(-2) law for heliocentric distances in the range 0.6 to 2.1 AU. Comparison of radio OH production rates to those estimated by UV techniques continues to show that the radio technique finds systematically lower production rates. Observations of the OH line shape show that the line width increases as the comet approaches perihelion, and that the broader line widths persist after perihelion out to at least rh = 1AU. Modeling of the profiles suggest that this may be accounted for through an increase in the velocity of the OH parent. The mean velocity of the OH emission (after correction for the OH Greenstein effect) is slightly blue shifted compared to the nucleus velocity and suggests that the outgassing from the nucleus is largely directed sunward.

Schloerb, F. Peter↗

High-resolution SOFIA/EXES Spectroscopy of SO2 Gas in the Massive Young Stellar Object MonR2 IRS3: Implications for the Sulfur Budget

Sulfur has been observed to be severely depleted in dense clouds leading to uncertainty in the molecules that contain it and the chemistry behind their evolution. Here, we aim to shed light on the sulfur chemistry in young stellar objects (YSOs) by using high-resolution infrared spectroscopy of absorption by the ν3 rovibrational band of SO2 obtained with the Echelon-Cross-Echelle Spectrograph on the Stratospheric Observatory for Infrared Astronomy. Using local thermodynamic equilibrium models we derive physical parameters for the SO2 gas in the massive YSO MonR2 IRS3. This yields a SO2/H abundance lower limit of 5.6 ± 0.5 × 10(exp -7), or >4% of the cosmic sulfur budget, and an intrinsic line width (Doppler parameter) of b < 3.20 km s(exp -1). The small line widths and high temperature (Tex = 234 ± 15 K) locate the gas in a relatively quiescent region near the YSO, presumably in the hot core where ices have evaporated. This sublimation unlocks a volatile sulfur reservoir (e.g., sulfur allotropes as detected abundantly in comet 67P/Churyumov–Gerasimenko), which is followed by SO2 formation by warm, dense gas-phase chemistry. The narrowness of the lines makes formation of SO2 from sulfur sputtered off grains in shocks less likely toward MonR2 IRS3.

Infrared ISM↗

Line Profile Measurements of the Lunar Exospheric Sodium

We report ongoing results of a program to measure the lunar sodium exospheric line profile from near the lunar limb out to two lunar radii (approx 3500 km). These observations are conducted from the National Solar Observatory McMath-Pierce telescope using a dual-etalon Fabry-Perot spectrometer with a resolving power of 180,600 (1.7 km/s) to measure line widths and velocity shifts of the Na D2 (5889 950 A) emission line in equatorial and polar regions at different lunar phases. The typical field of view (FOV) is 3 arcmin (approx 360 km) with an occasional smaller 1 arcmin FOV used right at the limb edge. The first data were obtained from full Moon to 3 days following full Moon (waning phase) in March 2009 as part of a demonstration run aimed at establishing techniques for a thorough study of temperatures and velocity variations in the lunar sodium exosphere. These data indicate velocity displacements from different locations off the lunar limb range between 150 and 600 m/s from the lunar rest velocity with a precision of +/- 20 to +/- 50 m/s depending on brightness. The measured Doppler line widths for observations within 10.5 arcmin of the east and south lunar limbs for observations between 5 deg and 40 deg lunar phase imply temperatures ranging decreasing from 3250 +/- 260K to 1175 +/- 150K. Additional data is now being collected on a quarterly basis since March 2011 and preliminary results will be reported.

Oliversen, Ronald J.↗

The structure of W49 A as deduced from molecular and recombination line observations

The molecular cloud complex W49 A has been observed in the 2.6-mm CO line, the 2-cm H2CO line, and the H76-alpha recombination line. These observations are most consistent with a picture of the complex in which a large H II region lies between two massive molecular clouds. Using a simple hydrodynamic model coupled with calculations of radiative transfer in the recombination lines, it is found that many of the spectral-line and continuum observations obtained on this region can be naturally explained, including: (1) the multiple structure observed in the molecular lines and the single structure in the recombination lines; (2) the local standard of rest (LSR) velocities of both the molecular and recombination lines; (3) the velocity gradients observed in the lines; (4) the continuum emission from the H II region; and (5) the line widths and line-to-continuum ratios of the recombination lines.

Mufson, S. L.↗

Galactic center iron line emission

Data from the Goddard Space Flight Center experiment on HEAO 1 were examined for galactic center iron line emission. Evidence for a 6.8 keV line from the summed flux within 10 deg longitude and 10 deg latitude of the galactic center was found; however, firm limits cannot be put on the intrinsic line width. If the line emission is diffuse and cosmic-ray-induced, the calculations of Bussard et al (1978) yield an upper limit to c-12 4.44 MeV line emission, which is not inconsistent with the results of Haymes et al (1975). Significant contributions to the iron line from discrete sources can not be ruled out.

Worrall, D. M.↗

Thermal Water Vapor Emission from Shocked Regions in Orion

Using the Long Wavelength Spectrometer on board the Infrared Space Observatory, we have observed thermal water vapor emission from a roughly circular field of view approximately 75" in diameter centered on the Orion BN-KL region. The Fabry-Perot line strengths, line widths, and spectral line shifts observed in eight transitions between 71 and 125 micron show good agreement with models of thermal emission arising from a molecular cloud subjected to a magnetohydrodynamic C-type shock. Both the breadth and the relative strengths of the observed lines argue for emission from a shock rather than from warm quiescent gas in the Orion core. Although one of the eight transitions appears anomalously strong and may be subject to the effects of radiative pumping, the other seven indicate an H2O/H2 abundance ratio on the order of 5 x 10(exp -4) and a corresponding gas-phase oxygen-to-hydrogen abundance ratio on the order of 4 x 10(exp -4). Given current estimates of the interstellar, gas-phase, oxygen and carbon abundances in the solar vicinity, this value is consistent with theoretical shock models that predict the conversion into water of all the gas-phase oxygen that is not bound as CO. The overall cooling provided by rotational transitions of H2O in this region appears to be comparable to the cooling through rotational lines of CO but is an order of magnitude lower than cooling through H2 emission. However, the model that best fits our observations shows cooling by H2O and CO dominant in that portion of the postshock region where temperatures are below approximately 800 K and neither vibrational nor rotational radiative cooling by H2 is appreciable.

Harwitt, Martin↗

Emission measures, electron densities, and nonthermal velocities from optically thin UV lines near a quiet solar limb

Calibrated intensities and line widths are presented for 45 optically thin chromospheric and transition-zone UV lines observed in a quiet area near the solar limb. The observations were made over the wavelength range from 1175 to 1915 A with the slit spectrograph on the Skylab Apollo Telescope Mount. Three nonthermal-velocity components are derived from the transition-zone line widths: a main component of 23 km/s and two high-velocity components of 45 and 75 km/s, respectively, which contribute 5% to 10% of the averaged intensity. Absolute intensities are determined as a function of height, emission measures are obtained as functions of height as well as temperature, and electron densities are estimated from density-sensitive line ratios. The densities estimated from different sets of lines are found not to agree with each other, but the values obtained from the Si III multiplet between 1297 and 1301 A are considered to be the most reliable. An atmospheric model with inhomogeneous structures extending high above the solar surface is suggested.

Moe, O. K.↗

A high-resolution survey of interstellar Na I D1 lines

We present high-resolution (0.5 km/s) spectra, obtained with the McDonald Observatory 2.7 m coude echelle spectrograph, of interstellar Na I D1 absorption toward 38 bright stars. Numerous narrow, closely blended absorption components, showing resolved Na I hyperfine structure, are evident in these spectra; such narrow components appear in both low halo and quite local gas, as well as in gas toward more distant disk stars. We have used the method of profile fitting in an attempt to determine column densities, line widths, and velocities for the individual interstellar clouds contributing to the observed absorption lines. The resulting sample of 276 clouds is significantly larger, and likely more complete, than several previous samples of 'individual' interstellar clouds, and allows more precise investigation of various statistical properties. We find that the cloud column density (N) and line width parameter (b) are not correlated, for 0.3 km/s approximately less than b approximately less than 1.5 km/s and 10.0/sq cm approximately less than log (N(Na I)) approximately less than 11.6/sq cm. The median b is about 0.73 km/s, the median log N is about 11.09/sq cm, and the median separation between adjacent components is about 2.0 km/s. All these are overestimates of the true median values, however, due to our inability to completely resolve all the component structure present in some cases; even at a resolution of 0.5 km/s, we may have discerned only 60% of the full number of individual components actually present. The one-dimensional dispersion of component velocities, in the local standard of rest, is approximately 8.6 km/s; the distribution of velocities is broader and displaced to more negative velocities for the weaker components. If 80 K is a representative temperature for the interstellar clouds seen in Na I absorption, then at least 38% (and probably the majority) of the clouds have subsonic internal turbulent motions. The range in N(H I) observed at a given N(Na I) increases as N(Na I) decreases below about 10(exp 11)/sq cm, so that N(Na I) becomes a less reliable predictor of N(H I) at low column densities. These spectra will be quite useful in future detailed studies of these lines of sight with the Hubble Space Telescope (HST) Goddard High Resolution Spectrograph (GHRS) echelle -- to determine accurate velocities and to reveal the detailed interstellar component structures that cannot be discerned at the 3.5 km/s resolution available with the GHRS.

Welty, Daniel E.↗

A shock tube study of line broadening in a temperature range of 6100 to 8300 K

Line widths of the Ca(II) 3968 A and Na(I) 5890 A resonance lines broadened by electric microfields in a plasma were measured. A pressure-driven shock tube was used as the light source. Radiation from the equilibrium region behind the reflected shock wave was studied using a rapid scanning Fabry-Perot interferometer. Electron and argon atom densities of about 8 x 10 to the 16th and 1 x 10 to the 19th/cu cm, respectively, were achieved at the relatively low temperature of around 7500 K by vaporizing a cesium powder that had been added to the shock tube as a solid aerosol in argon gas. The measured line widths were predominantly Stark broadened by the electrons and ions in the plasma, although Doppler, van der Waals, instrument function and optical depth effects had to be taken into account.

Baur, J. F.↗

On the origin of the positron annihilation radiation from the direction of the galactic center

Physical constraints on the possible configuration of the positron annihilation region observed at the galactic center with gamma ray instrumentation focused on 511 keV emission are discussed. The line width is less than 2.5 keV, implying that the positrons annihilate in a gas that features some ionization. The line width also limits velocities to less than 700 km/sec, while the line center indicated a bulk velocity along the line of sight of between -90 to 200 km/sec. Data from emissions less than 511 keV suggest a production of 511 keV photons/positron ratio of 0.65 to account for the continuum emission detected. The annihilation region requires a temperature of at least 50,000 K and an ionization fraction of at least 10 percent, a density near 100,000 H/cu cm, and a diameter less than 10 to the 18th cm. Relativitistic considerations support pair production around an accreting black hole or the collision of collimated photon beams as possible sources of the emissions.

Lingenfelter, R. E.↗

Ligand Controls Excited Charge Carrier Dynamics in Metal-Rich CdSe Quantum Dots: Computational Insights

Small metal-rich semiconducting quantum dots (QDs) are promising for solid-state lighting and single-photon emission due to their highly tunable yet narrow emission line widths. Nonetheless, the anionic ligands commonly employed to passivate these QDs exert a substantial influence on the optoelectronic characteristics, primarily owing to strong electron–phonon interactions. In this work, we combine time-domain density functional theory and nonadiabatic molecular dynamics to investigate the excited charge carrier dynamics of Cd 28 Se 17 X 22 QDs (X = HCOO – , OH – , Cl – , and SH – ) at ambient conditions. These chemically distinct but regularly used molecular groups influence the dynamic surface-ligand interfacial interactions in Cd-rich QDs, drastically modifying their vibrational characteristics. The strong electron–phonon coupling leads to substantial transient variations at the band edge states. The strength of these interactions closely depends on the physicochemical characteristics of passivating ligands. Consequently, the ligands largely control the nonradiative recombination rates and emission characteristics in these QDs. Our simulations indicate that Cd 28 Se 17 (OH) 22 has the fastest nonradiative recombination rate due to the strongest electron–phonon interactions. Conversely, QDs passivated with thiolate or chloride exhibit considerably longer carrier lifetimes and suppressed nonradiative processes. The ligand-controlled electron–phonon interactions further give rise to the broadest and narrowest intrinsic optical line widths for OH and Cl-passivated single QDs, respectively. Finally, obtained computational insights lay the groundwork for designing appropriate passivating ligands on metal-rich QDs, making them suitable for a wide range of applications, from blue LEDs to quantum emitters.

36 MATERIALS SCIENCE↗

Indirect Excitons and Trions in MoSe 2 /WSe 2 van der Waals Heterostructures

Indirect excitons (IX) in semiconductor heterostructures are bosons, which can cool below the temperature of quantum degeneracy and can be effectively controlled by voltage and light. In this work, IX quantum Bose gases and IX devices were explored in GaAs heterostructures where an IX range of existence is limited to low temperatures due to low IX binding energies. IXs in van der Waals transition-metal dichalcogenide (TMD) heterostructures are characterized by large binding energies giving the opportunity for exploring excitonic quantum gases and for creating excitonic devices at high temperatures. TMD heterostructures also offer a new platform for studying single-exciton phenomena and few-particle complexes. In this work, we present studies of IXs in MoSe 2 /WSe 2 heterostructures and report on two IX luminescence lines whose energy splitting and temperature dependence identify them as neutral and charged IXs. The experimentally found binding energy of the indirect charged excitons, that is, indirect trions, is close to the calculated binding energy of 28 meV for negative indirect trions in TMD heterostructures. We also report on the realization of IXs with a luminescence line width reaching 4 meV at low temperatures. An enhancement of IX luminescence intensity and the narrow line width are observed in localized spots.

2D materials↗

Thermal Line Shift and Broadening of Ho(3+) in Y3AI5O12 and Lu3AIO12

The interaction between the active ion and the host lattice manifests itself in two distinct ways: the static interaction with the crystal field that causes the splitting of the free ion energy levels and the active interaction through the surrounding phonon system that produces temperature dependent characteristics in the optical spectrum of the ion (e.g. line broadening and line shift). The strength of the splitting depends heavily on the electronic configuration of the atom. The model give by McCumber and Sturge describes the thermal effects on line width and position above 77 K with Raman scattering of Debye model phonons. These processes predict a Lorentzian line shape. However, below 77 K the principal contributions are from crystal inhomogeneities that result in a Gaussian line shape. We have investigated the experimental Stark levels as well as the thermal effects on the line width and the position of trivalent holmium ions in both yttrium aluminum garnet, Y3Al5O12 (YAG) and lutetium aluminum garnet, Lu3Al5O12 (LuAG) crystals. We have compared the Stark levels of the (5)I(6) state, and the thermal line shift and broadening of an isolated transition (Z2 to X13) between the (5)I(8) and (5)I(6) stark levels in these crystals. This transition occurs in the near infrared region at approximately 1117 nm.

Snoke, Elizabeth R.↗

Quantum Emitter Formation Dynamics and Probing of Radiation-Induced Atomic Disorder in Silicon

Near-infrared color centers in silicon are emerging candidates for on-chip integrated quantum emitters, optical-access quantum memories, and sensing. We access ensemble G-color-center formation dynamics and radiation-induced atomic disorder in silicon for a series of megaelectronvolt proton-flux conditions. The photoluminescence results reveal that the G centers are formed more efficiently by pulsed-proton irradiation than by continuous-wave proton irradiation. The enhanced transient excitations and dynamic annealing within nanoseconds allows optimization of the ratio of G-center formation to nonradiative defect accumulation. The G centers preserve narrow line widths of about 0.1 nm when they are generated by moderate pulsed-proton fluences, while the line width broadens significantly as the pulsed-proton fluence increases. This implies vacancy or interstitial clustering by overlapping collision cascades. The tracking of G-center properties for a series of irradiation conditions enables sensitive probing of atomic disorder, serving as a complementary analytical method for sensing damage accumulation. Aided by ab initio electronic structure calculations, we provide insight into the atomic disorder induced inhomogeneous broadening by introducing vacancies, silicon interstitials, and oriented strain fields in the vicinity of a G center. A vacancy leads to a tensile strain and can result in either a red shift or a blue shift of the G-center emission, depending on its position relative to the G center. Meanwhile, Si interstitials lead to compressive strain, which results in a monotonic red shift. In conclusion, high-flux and tunable ion pulses enable the exploration of the fundamental dynamics of radiation-induced defects as well as methods for the optimization of G-center formation and qubit synthesis for quantum information processing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

EUV observations of quiescent prominences from Skylab

Measurements of line intensities and line widths for three quiescent prominences observed with Naval Research Laboratory slit spectrograph on ATM/Skylab are reported. The wavelengths of the observed lines cover the range 1175 A to 1960 A. The measured intensities have been calibrated to within approximately a factor 2 and are average intensities over a 2 arcsec by 60 arcsec slit. Nonthermal velocities from the measured line widths are derived. The nonthermal velocity is found to increase with temperature in the prominence transition zone. Electron densities and pressures are derived from density sensitive line ratios. Electron pressures for two of the prominences are found to lie in the range 0.04-0.08 dyn/sq cm, while values for the third and most intense and active of the three prominences are in the range 0.07-0.22 dyn/sq cm.

Moe, O. K.↗