Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAUNCH TIME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Formation and eruption of Sun-aligned arcs at the polar cap-auroral oval boundary

This paper reports on results from a study of the poleward edge of the auroral oval in the morning sector using a comprehensive blend of in-situ and ground-based measurements. Three rockets, equipped to measure electric and magnetic fields, energetic particles, and plasma density flew into an auroral display whose dynamical features were reorded with a digital image into an auroral display intensified all-sky camera as well as with an incoherent scatter radar. In addition, a number of DMSP satellite measurements bracketed the launch time. Evidence is presented here that in a condition of declining magnetic activity Sun-aligned arcs are injected into the polar cap at velocities approximately 7 km/s from locations of periodic brightening along the morningside of the auroral oval. The multipoint in situ measurements allow some separation of temporal and spatial effects and strongly suggest a poleward contraction of the convention pattern of about 0.25 deg INVL in 70 s. The most equatorward of the two brightest arcs studied erupted into a region which already was characterized by strong sunward convection. The most poleward, however, pushed into a region that had been convecting in an antisunward direction at velocities exceeding 1 km/s less than 2 min earlier, and it is likely that sunward convection subsequently pertained poleward of that arc as well. We believe that these events mark the reconfiguration of the magnetosphere into a system characterized by a smaller polar cap.

Berg, G. A.↗

Development of a Satellite Systems for Measuring Soil Moisture

The science need for remotely sensed soil moisture has been well established in the hydrologic, climate change and weather forecasting communities. There also have been a number of programs that have demonstrated the feasibility of using long wave microwave sensors for estimating soil moisture. These have ranged from truck mounted sensors, to intensive airborne campaigns with science objectives. Based on this history of truck and aircraft experiments, the science community has settled on a soil moisture product that meets the following criteria: a two day global repeat, a measured layer of 5 cm of soil, a footprint of 20 to 30 km, and an absolute accuracy of +/- 4% volumetric soil moisture. The principal sensor to accomplish this is an L-band passive microwave radiometer. A soil moisture mission is being proposed for the NASA Earth Systems Science Pathfinder (ESSP) mission which has very real constraints of a limited budget which includes the launch vehicle, and a three year award to launch time schedule. This paper describes ways to solve the very large antenna challenge, and the criteria used to choose the final design for an ESSP proposal. The paper also discusses the alternatives considered to obtain the necessary ancillary data for characterizing the surface roughness, the surface temperature and the attenuation affects of vegetation.

Engman, Edwin T.↗

STS-53 Countdown Status Briefing

George Diller, NASA Public Affairs, introduces Mike Leinbach, Shuttle Test Director, and Ed Prisella, Shuttle Weather Officer, USAF. They give a summary of the countdown for the launch of STS-53 Discovery and information on the weather for the launch time. They then answer questions from the press.

Source record↗

Airborne and Ground-Based Optical Depth Measurements in Canada and California During LITE

The NASA Ames Airborne Autotracking Sunphotometer was used to obtain correlative optical depth measurements in conjunction with LITE (Lidar-In-Space Technology Experiment) measurements during STS-64 Orbits 35, 66, and 82, The sunphotometer was operated on, board the NASA C-130 and obtained data in Canada a few hours prior to the shuttle overpass during Orbit 35. Because of the approximate two-hour slip in STS-64 launch time, all overpasses in Canada after Orbit 35 occurred after local sunset. Therefore, immediately following the Orbit 35 C-130 flight, the sunphotometer was removed from the C-130 and transported via commercial carrier to Southern California, where ground-based measurements were taken prior to and during the shuttle overflights of Orbits 66 and 82. Vertical profiles of optical depth spectra, as well as ground-based spectra, are shown. The spectra derived from measurements acquired during Orbits 66 and 82 are compared with analogous spectra derived from solar radiometer measurements obtained by the University of Arizona at various Southern California sites. Both data sets are available for comparison to nearby LITE measurements and for calculation of backscatter-to-extinction ratios, derivation of aerosol size distributions, and use in transmission-correction of LITE signal profiles.

Russell, Philip B.↗

Ocean Observations with EOS/MODIS: Algorithm Development and Post Launch Studies

This separation has been logical thus far; however, as launch of AM-1 approaches, it must be recognized that many of these activities will shift emphasis from algorithm development to validation. For example, the second, third, and fifth bullets will become almost totally validation-focussed activities in the post-launch era, providing the core of our experimental validation effort. Work under the first bullet will continue into the post-launch time frame, driven in part by algorithm deficiencies revealed as a result of validation activities. Prior to the start of the 1999 fiscal year (FY99) we were requested to prepare a brief plan for our FY99 activities. This plan is included as Appendix 1. The present report describes the progress made on our planned activities.

Gordon, Howard R.↗

Flight Testing of Hybrid Powered Vehicles

Hybrid Rocket powered vehicles have had a limited number of flights. Most recently in 2004, Scaled Composites had a successful orbital trajectory that put a private vehicle twice to over 62 miles high, the edge of space to win the X-Prize. This endeavor man rates a hybrid system. Hybrids have also been used in a number of one time launch attempts - SET-1, HYSR, HPDP. Hybrids have also been developed for use and flown in target drones. This chapter discusses various flight-test programs that have been conducted, hybrid vehicles that are in development, other hybrid vehicles that have been proposed and some strap-on applications have also been examined.

Story, George↗

Space Shuttle Main Engine (SSME) Systems Operation Overview and Evolution

The Space Shuttle Main Engine (SSME) is a large thrust class, reusable, staged combustion cycle rocket engine employing liquid hydrogen and liquid oxygen propellants. A cluster of three SSMEs is used on every space shuttle mission to propel the space shuttle orbiter vehicle into low earth orbit. Development of the SSME began in the early 70's and the first flight of the space shuttle occurred in 1981. Today, the SSME has accrued over one million seconds of ground test and flight operational time, launching 129 space shuttle missions. The systems operation of the SSME was developed and evolved to support the specific requirements of the Space Shuttle Program (SSP). This paper provides a systems operation overview of the SSME, including: engine cycle, propellant flowpaths, and major components; control system; operations during pre-start, start, mainstage, and shutdown phases; launch commit criteria (LCCs) and operational redlines. Furthermore, this paper will discuss how changes to the SSME over its history have impacted systems operations.

Benefield, Philip A.↗

NASA Upper Atmosphere Research Satellite (UARS) Re-Entry Prediction and Analysis

No NASA or USG human casualty reentry risk limits existed when UARS was designed, built, and launched. Time of reentry estimates were within normal limits NASA, the USG, and some foreign space agencies now seek to limit human casualty risks from reentering space objects to less than 1 in 10,000. UARS was a moderate-sized space object. Uncontrolled reentries of objects more massive than UARS are not frequent, but neither are they unusual. Since the beginning of the space age, there has been no confirmed report of an injury resulting from reentering space objects.

Stansbery, Eugene↗

SFDT-1 Camera Pointing and Sun-Exposure Analysis and Flight Performance

The Supersonic Flight Dynamics Test (SFDT) vehicle was developed to advance and test technologies of NASA's Low Density Supersonic Decelerator (LDSD) Technology Demonstration Mission. The first flight test (SFDT-1) occurred on June 28, 2014. In order to optimize the usefulness of the camera data, analysis was performed to optimize parachute visibility in the camera field of view during deployment and inflation and to determine the probability of sun-exposure issues with the cameras given the vehicle heading and launch time. This paper documents the analysis, results and comparison with flight video of SFDT-1.

White, Joseph↗

Tropospheric Ozone Increases over the Southern Africa Region: Bellwether for Rapid Growth in Southern Hemisphere Pollution?

Increases in free-tropospheric (FT) ozone based on ozonesonde records from the early 1990s through 2008 over two subtropical stations, Irene (near Pretoria, South Africa) and Réunion (21 deg. S, 55 deg. E; approx. 2800 km NE of Irene in the Indian Ocean), have been reported. Over Irene a large increase in the urban-influenced boundary layer (BL, 1.5-4 km) was also observed during the 18-year period, equivalent to 30%decade−1. Here we show that the Irene BL trend is at least partly due to a gradual change in the sonde launch times from early morning to the midday period. The FT ozone profiles over Irene in 1990-2007 are re-examined, filling in a 1995-1999 gap with ozone profiles taken during the Measurements of Ozone by Airbus In-service Aircraft (MOZAIC) project over nearby Johannesburg. A multivariate regression model that accounts for the annual ozone cycle, El Niño-Southern Oscillation (ENSO) and possible tropopause changes was applied to monthly averaged Irene data from 4 to 11 km and to 1992-2011 Réunion sonde data from 4 to 15 km. Statistically significant trends appear predominantly in the middle and upper troposphere (UT; 4-11 km over Irene, 4-15 km over Réunion) in winter (June-August), with increases 1 ppbv yr(exp. −1) over Irene and approx. 2 ppbv yr(exp. −1) over Réunion. These changes are equivalent to approx. 25 and 35-45%decade( exp. −1), respectively. Both stations also display smaller positive trends in summer, with a 45%decade(exp. −1) ozone increase near the tropopause over Réunion in December. To explain the ozone increases, we investigated a time series of dynamical markers, e.g., potential vorticity (PV) at 330-350 K. PV affects UT ozone over Irene in November-December but displays little relationship with ozone over Réunion. A more likely reason for wintertime FT ozone increases over Irene and Réunion appears to be long-range transport of growing pollution in the Southern Hemisphere. The ozone increases are consistent with trajectory origins of air parcels sampled by the sondes and with recent NOx emissions trends estimated for Africa, South America and Madagascar. For Réunion trajectories also point to sources from the eastern Indian Ocean and Asia.

Trends↗

Product of the SNPP VIIRS SD Screen Transmittance and the SD BRDF (RSB) From Both Yaw Maneuver and Regular On-Orbit Data

To assure data quality, the Earth-observing Visible Infrared Imaging Radiometer Suite (VIIRS) regularly performs on-orbit radiometric calibrations of its 22 spectral bands. The primary calibration radiance source for the reflective solar bands (RSBs) is a sunlit solar diffuser (SD). During the calibration process, sunlight goes through a perforated plate (the SD screen) and then strikes the SD. The SD scattered sunlight is used for the calibration, with the spectral radiance proportional to the product of the SD screen transmittance and the SD bidirectional reflectance distribution function (BRDF). The BRDF is decomposed to the product of its value at launch and a numerical factor quantifying its change since launch. Therefore, the RSB calibration requires accurate knowledge of the product of the SD screen transmittance and the BRDF (RSB; launch time). Previously, we calculated the product with yaw maneuver data and found that the product had improved accuracy over the prelaunch one. With both yaw maneuver and regular on orbit data, we were able to improve the accuracy of the SDSM screen transmittance and the product for the solar diffuser stability monitor SD view. In this study, we use both yaw maneuver and a small portion of regular on-orbit data to determine the product for the RSB SD view.

Lei, Ning↗

Electrochemical Solutions for Advanced Life Support

The Oxygen Generating Assembly (OGA) on-board the International Space Station (ISS) employs a polymer electrolyte membrane (PEM) water electrolysis cell stack to electrochemically dissociate water into its two components – oxygen and hydrogen. Oxygen is provided to the cabin atmosphere for crew respiration while the hydrogen is delivered to a carbon dioxide reduction system to recover oxygen as water. The design of the OGA evolved over a number of years to arrive at the system solution that is currently operational on ISS. Future manned missions to space will require advanced technologies that eliminate the need for resupply from earth and feature in-situ resource utilization to sustain crew life and to provide useful materials to the crew. The architects planning such missions should consider all potential solutions at their disposal to arrive at an optimal vehicle solution that minimizes crew maintenance time, launch weight, installed volume and energy consumption demands. Skyre is developing new technologies through funding from NASA, the Department of Energy, and internal investment based on PEM technology that could become an integral part of these new vehicle solutions. At varying stages of Technology Readiness Level (TRL) are: an oxygen concentrator and compressor that can separate oxygen from an air stream and provide an enriched oxygen resource for crew medical use and space suit recharge without any moving parts in the pure oxygen stream; a regenerative carbon dioxide removal system featuring a PEM-based sorbent regenerator; a carbon dioxide reduction system that electrochemically produces organic compounds that could serve as fuels or as a useful intermediary to more beneficial compounds; and an electrochemical hydrogen separator and compressor for hydrogen recycle. The technical maturity of these projects is presented along with pertinent performance test data that could be beneficial in future study efforts.

Roy, Robert J.↗

TPSAS-NF1676L-30150-DND

Validation of science data products from the Stratospheric Aerosol and Gas Experiment (SAGE) III, installed on the International Space Station (ISS) in March 2017, requires intercomparison with validated data sources. The SAGE III/ISS mission is actively utilizing in-situ profile measurements from balloon packages, consisting of a standard meteorological radiosonde, ozonesonde, and frost-point hygrometer, that were launched coincident with SAGE III/ISS overpass opportunities. Some packages have included an aerosol sonde. This provides regional correlations of ozone, water vapor and aerosol extinction between the in-situ measurement data and the SAGE III/ISS profile products. In addition, ground-based LIDAR measurements and aircraft-based measurements of ozone, water vapor, aerosol extinction and nitrogen dioxide will provide additional validation data for correlation with the SAGE III/ISS data products. Initial results of the mission directed validation program will be presented. When possible, operation and launch times were modified to improve the temporal and spatial coincidence between the measurements. Results and progress utilizing LIDAR and balloon-borne aerosol observations are discussed herein, while intercomparisons that make use of ozone sondes is are presented in the companion poster by Kizer et al.

Travis Knepp↗

No Launch Before Its Time

Aura is an Earth-observing satellite developed to help us study the quality of the air we breathe. It will look at the state of the ozone and the atmospheric composition in regards to the Earth's changing climate. I headed to California on July 5, 2004. The plan was that the satellite would launch on the tenth, but we had a few problems getting it off. This was the fifty-ninth launch of my career, and it was also a little different than most of my previous launches. Most of the time it's weather that postpones a launch; there aren't usually that many technical issues this late in the game. This time. however, we had several problems, equally split between the launch vehicle and the spacecraft. I remember a member of the crew asking me, 'Is this normal?' And in my experience, it wasn't.

Townsend, Bill↗

Systems engineering studies of on-orbit assembly operation

While the practice of construction has a long history, the underlying theory of construction is relatively young. Very little has been documented as to techniques of logistic support, construction planning, construction scheduling, construction testing, and inspection. The lack of 'systems approaches' to construction processes is certainly one of the most serious roadblocks to the construction of space structures. System engineering research efforts at CSC are aimed at developing concepts and tools which contribute to a systems theory of space construction. The research is also aimed at providing means for trade-offs of design parameters for other research areas in CSC. Systems engineering activity at CSC has divided space construction into the areas of orbital assembly, lunar base construction, interplanetary transport vehicle construction, and Mars base construction. A brief summary of recent results is given. Several models for 'launch-on-time' were developed. Launch-on-time is a critical concept to the assembly of such Earth-orbiting structures as the Space Station Freedom, and to planetary orbiters such as the Mars transfer vehicle. CSC has developed a launch vehicle selection model which uses linear programming to find optimal combinations of launch vehicles of various sizes (Atlas, Titan, Shuttles, HLLV's) to support SEI missions. Recently, the Center developed a cost trade-off model for studying on orbit assembly logistics. With this model it was determined that the most effective size of the HLLV would be in the range of 120 to 200 metric tons to LEO, which is consistent with the choices of General Stafford's Synthesis Group Report. A second-generation Dynamic Construction Activities Model ('DYCAM') process model has been under development, based on our past results in interruptability and our initial DYCAM model. This second-generation model is built on the paradigm of knowledge-based expert systems. It is aimed at providing answers to two questions: (1) what are some necessary or sufficient conditions for judging conceptual designs of spacecraft?, and (2) can a methodology be formulated such that these conditions may be used to provide computer-aided tools for evaluating conceptual designs and planning for space assembly sequences? Early simulation results indicate that the DYCAM model has a clear ability to emulate and simulate human orbital construction processes.

Morgenthaler, George W.↗

Terrestrial Planets Comparative Climatology (TPCC) mission concept

The authors and co-signers of the Terrestrial Planets Comparative Climatology (TPCC) mission concept white paper advocate that planetary science in the next decade would greatly benefit from comparatively studying the fundamental behavior of the atmospheres of Venus and Mars, contemporaneously and with the same instrumentation, to capture atmospheric response to the same solar forcing, and with a minimum of instrument-related variability. NASA’s vision is to understand the effects of the Sun on the solar system and the potential for life elsewhere (Obj,1.1 of [1]). This vision directly motivates the study of terrestrial climate histories and evolution, with the ultimate goal of understanding what factors allow the emergence and sustainability of life/biosphere. It is widely accepted that Venus, Mars, and Earth were formed at the same time and in the same neighborhood of the solar nebula [2,3], and had water—a necessary ingredient for life. In spite of strong overlap in the atmospheric composition of these planets, their current climatic states are vastly different. While Earth retains water, both Mars and Venus’ surfaces are now dry. The manner in which these terrestrial bodies evolved, and whether Mars or Venus currently hosts or previously hosted life, are fundamental mysteries in planetary science. As such, the TPCC mission concept has been developed.The TPCC guiding science goals are:(1) to understand Venus’ evolutionary history compared to Mars and Earth, and (2) to elucidate the driving forces and mechanisms of global circulation at Mars and Venus. These goals address the science question: Why have Mars’ and Venus’ climates evolved so differently from each other and from Earth’s? Furthermore, a greater depth of understanding our own solar system, enables us to understand the variability and likelihood of habitable conditions within extra-solar planetary systems.We suggest a mission architecture and payload that would determine the noble gas content and isotopic ratios, including the D/H ratio, at Venus with sufficient accuracy to identify the timeline of Venus’ climatic evolution for comparison with Mars. In addition, our concept would systematically “follow the energy” at Mars and Venus, in order to establish how solar forcing on the two atmospheric systems leads to the current balance of dynamical, chemical, and radiative processes responsible for each planet’s climatic state.This would include acquisition of the first global atmospheric wind profiles on either planet;global, continuous profiles of aerosols, gases, and water vapor at vertical resolutions higher than any previous mission;and regular UV and IR night glow observations tracking global circulation on both planets.To increase the fidelity of the planned planetary comparisons, the TPCC mission concept baseline (estimated to be New Frontiers Class)would send a single spacecraft to visit one planet and then the next, allowing measurements of each planet with the same instrumentation within similar parts of the solar cycle. The concept uses commercial solar-electric propulsion (SEP; e.g., [4])similar to the Psyche mission [5], plus a probesent deep into Venus’ atmosphere(e.g., LLISSE concept; [6]).Alternatively, “twin” spacecraft (with added probe to the Venus craft),developed at the same time,and launched close in time,would increase the overlap in operation periods and should also be studied. Either architecture is a timely alternative to independently developed and launched spacecraft payloads, which ultimately are more costly and difficult to inter-calibrate.

Leslie K. Tamppari↗

Space Shuttle Main Engine operational status

The Space Shuttle Main Engine (SSME) has been launched 51 times during 17 launches of the Space Shuttle through May 1985. The engine performance during those launches is described revealing successful engine operation under nominal and off-nominal conditions. Engine maintenance is discussed, explaining the cause for each engine removed and replaced. Turbopump maintenance, life, and mean time between replacement are all analyzed. Life improvement plans are outlined. Overall cost per flight experienced to date in both manpower and material is revealed. Overall accomplishments of the SSME in launch operations to date are summarized.

Klatt, F.↗