Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Systems integration for the Kennedy Space Center (KSC) Robotics Applications Development Laboratory (RADL)

A laboratory for developing robotics technology for hazardous and repetitive Shuttle and payload processing activities is discussed. An overview of the computer hardware and software responsible for integrating the laboratory systems is given. The center's anthropomorphic robot is placed on a track allowing it to be moved to different stations. Various aspects of the laboratory equipment are described, including industrial robot arm control, smart systems integration, the supervisory computer, programmable process controller, real-time tracking controller, image processing hardware, and control display graphics. Topics of research include: automated loading and unloading of hypergolics for space vehicles and payloads; the use of mobile robotics for security, fire fighting, and hazardous spill operations; nondestructive testing for SRB joint and seal verification; Shuttle Orbiter radiator damage inspection; and Orbiter contour measurements. The possibility of expanding the laboratory in the future is examined.

Davis, V. Leon↗
NASA NTRS1990

Plasma contactor modeling with NASCAP/LEO - Extending laboratory results to space systems

In the laboratory, hollow cathode-based plasma contactors have been observed to both emit and collect ampere-level electron currents with low impedance. The laboratory behavior of hollow cathode-based plasma contactors and the limited space experience with hollow cathodes suggest that, for many applications, a hollow cathode-based plasma contactor is the ideal device to provide electrical connection with the space plasma. In order to confidently extend the laboratory experience to the low-earth-orbit environment, a series of plasma contactor computer models has been developed. Calculations show that a hollow cathode plasma contactor that collects 0.5 A in the laboratory will only collect 2.4 mA in space. The simplest way to boost the collected current is to increase the gas flow. A mole of gas is enough to collect ampere level currents for 5-1/2 hours.

Davis, V. A.↗
NASA NTRS1990

Microbial ecology laboratory procedures manual NASA/MSFC

An essential part of the efficient operation of any microbiology laboratory involved in sample analysis is a standard procedures manual. The purpose of this manual is to provide concise and well defined instructions on routine technical procedures involving sample analysis and methods for monitoring and maintaining quality control within the laboratory. Of equal importance is the safe operation of the laboratory. This manual outlines detailed procedures to be followed in the microbial ecology laboratory to assure safety, analytical control, and validity of results.

Huff, Timothy L.↗
NASA NTRS1991

Production of N(+)-asterisk from N2 + hnu - Effective EUV emission yields from laboratory and dayglow data

Photodissociative ionization of N2 into the unbound N2(+) H 2Sigma-g(+) state is identified as the parentage of a number of N(+) and N-excited states that contribute to the u.v. dayglow. Yields have been obtained for the production of extreme ultraviolet emission lines of N(+) and N from a laboratory experiment using a broadband synchrotron radiation source with fluorescence spectroscopy. The yields are termed 'effective', in that they are constant percentages of the H state cross section. These are compared wih effective yields needed to reproduce N II 1085 and 916 A lines from four dayglow observations using a model of solar energy deposition and photoelectron production and loss in the earth's thermosphere. The 1085 A effective yield measured in the laboratory (18 percent) agrees with that from the dayglow data (average of 17 percent) to well within experimental uncertainties. Thus, it is concluded that photodissociative ionization of N2 is the primary source of the N II 1085 A dayglow. However, there is an order of magnitude discrepancy among the various dayglow observations of the 1085/916 intensity ratio, only one of which is consistent with the laboratory observation of 4.4. Neither contamination by other dayglow features nor atmospheric extinction can account for the disparities. Laboratory measurements of N2 and O2 absorption cross sections at these wavelengths are also reported.

Meier, R. R.↗
NASA NTRS1992

A senior manufacturing laboratory for determining injection molding process capability

The following is a laboratory experiment designed to further understanding of materials science. This subject material is directed at an upper level undergraduate/graduate student in an Engineering or Engineering Technology program. It is assumed that the student has a thorough understanding of the process and quality control. The format of this laboratory does not follow that which is normally recommended because of the nature of process capability and that of the injection molding equipment and tooling. This laboratory is instead developed to be used as a point of departure for determining process capability for any process in either a quality control laboratory or a manufacturing environment where control charts, process capability, and experimental or product design are considered important topics.

Wickman, Jerry L.↗
NASA NTRS1992

A manned exobiology laboratory based on the Moon

Establishment of an exobiology laboratory on the Moon would provide a unique opportunity for exploration of extraterrestrial materials on a long-term, ongoing basis, for elucidation of exobiological processes and chemical evolution. A major function of the lunar exobiology laboratory would be to examine samples collected from other planets (e.g., Mars) for the presence of extant or extinct life. By establishing a laboratory on the Moon, preliminary analyses could be conducted away from Earth, thus establishing that extraterrestrial materials are benign before their return to Earth for more extensive investigations. The Moon-based exobiology laboratory would have three major components for study of samples returned from other planets: (1) the search for extant life - this component would focus on the detection and identification of life forms using biological, physical, and chemical methods; (2) the search for extinct life - this component would concentrate on identification of extinct life using micropaleontological physical and chemical means; and (3) the search and evidence of chemical evolution - this component would be devoted to the detection and identification of molecules revealing prebiotic chemical evolution.

Gehrke, Charles W.↗
NASA NTRS1992

Sandia National Laboratories

Sandia National Laboratories has identified technology transfer to U.S. industry as a laboratory mission which complements our national security mission and as a key component of the Laboratory's future. A number of technology transfer mechanisms - such as CRADA's, licenses, work-for-others, and consortia - are identified and specific examples are given. Sandia's experience with the Specialty Metals Processing Consortium is highlighted with a focus on the elements which have made it successful. A brief discussion of Sandia's potential interactions with NASA under the Space Exploration Initiative was included as an example of laboratory-to-NASA technology transfer. Viewgraphs are provided.

Gilliom, Laura R.↗
NASA NTRS1921

Some new tests at the Gottingen laboratory

The tests at the Gottingen laboratory included: friction tests on a surface treated with omelette, verification tests on the M.V.A. 356 wing, and comparative tests of wing no. 36 at the Eiffel laboratory. The examination of all these experiments leads to the belief that, at large incidences, the speeds registered by the suction manometer of the testing chamber of the Eiffel laboratory wind tunnel are, owing to pressure drop, greater than the actual speeds. Therefore, the values of k(sub x) and k(sub y) measured at the Eiffel laboratory at large incidences are too low.

Source record↗
NASA NTRS1951

Comparison of High-Speed Operating Characteristics of Size 215 Cylindrical-Roller Bearings as Determined in Turbojet Engine and in Laboratory Test Rig

A comparison of the operating characteristics of 75-millimeter-bore (size 215) cylindrical-roller one-piece inner-race-riding cage-type bearings was made using a laboratory test rig and a turbojet engine. Cooling correlation parameters were determined by means of dimensional analysis, and the generalized results for both the inner- and outer-race bearing operating temperatures are compared for the laboratory test rig and the turbojet engine. Inner- and outer-race cooling-correlation curves were obtained for the turbojet-engine turbine-roller bearing with the same inner- and outer-race correlation parameters and exponents as those determined for the laboratory test-rig bearing. The inner- and outer-race turbine roller-bearing temperatures may be predicted from a single curve, regardless of variations in speed, load, oil flow, oil inlet temperature, oil inlet viscosity, oil-jet diameter or any combination of these parameters. The turbojet-engine turbine-roller-bearing inner-race temperatures were 30 to 60 F greater than the outer-race-maximum temperatures, the exact values depending on the operating condition and oil viscosity; these results are in contrast to the laboratory test-rig results where the inner-race temperatures were less than the outer-race-maximum temperatures. The turbojet-engine turbine-roller bearing, maximum outer-race circumferential temperature variation was approximately 30 F for each of the oils used. The effect of oil viscosity on inner- and outer-race turbojet-engine turbine-roller-bearing temperatures was found to be significant. With the lower viscosity oil (6x10(exp -7) reyns (4.9 centistokes) at 100 F; viscosity index, 83), the inner-race temperature was approximately 30 to 35 F less than with the higher viscosity oil (53x10(exp -7) reyns (42.8 centistokes) at 100 F; viscosity index, 150); whereas the outer-race-maximum temperatures were 12 to 28 F lower with the lower viscosity oil over the DN range investigated.

BEARINGS, ANTI-FRICTION↗
NASA NTRS1993

Psychophysiological measures of cognitive workload in laboratory and flight

Psychophysiological data have been recorded during different levels of cognitive workload in laboratory and flight settings. Cardiac, eye blink, and brain data have shown meaningful changes as a function of the levels of mental workload. Increased cognitive workload is generally associated with increased heart rates, decreased blink rates and eye closures, and decreased evoked potential amplitudes. However, comparisons of laboratory and flight data show that direct transference of laboratory findings to the flight environment is not possible in many cases. While the laboratory data are valuable, a data base from flight is required so that 'real world' data can be properly interpreted.

Wilson, Glenn F.↗
NASA NTRS1993

A program for the investigation of the Multibody Modeling, Verification, and Control Laboratory

The Multibody Modeling, Verification, and Control (MMVC) Laboratory is under development at NASA MSFC in Huntsville, Alabama. The laboratory will provide a facility in which dynamic tests and analyses of multibody flexible structures representative of future space systems can be conducted. The purpose of the tests are to acquire dynamic measurements of the flexible structures undergoing large angle motions and use the data to validate the multibody modeling code, TREETOPS, developed under sponsorship of NASA. Advanced control systems design and system identification methodologies will also be implemented in the MMVC laboratory. This paper describes the ground test facility, the real-time control system, and the experiments. A top-level description of the TREETOPS code is also included along with the validation plan for the MMVC program. Dynamic test results from component testing are also presented and discussed. A detailed discussion of the test articles, which manifest the properties of large flexible space structures, is included along with a discussion of the various candidate control methodologies to be applied in the laboratory.

Tobbe, Patrick A.↗
NASA NTRS1994

Laboratory and in-flight experiments to evaluate 3-D audio display technology

Laboratory and in-flight experiments were conducted to evaluate 3-D audio display technology for cockpit applications. A 3-D audio display generator was developed which digitally encodes naturally occurring direction information onto any audio signal and presents the binaural sound over headphones. The acoustic image is stabilized for head movement by use of an electromagnetic head-tracking device. In the laboratory, a 3-D audio display generator was used to spatially separate competing speech messages to improve the intelligibility of each message. Up to a 25 percent improvement in intelligibility was measured for spatially separated speech at high ambient noise levels (115 dB SPL). During the in-flight experiments, pilots reported that spatial separation of speech communications provided a noticeable improvement in intelligibility. The use of 3-D audio for target acquisition was also investigated. In the laboratory, 3-D audio enabled the acquisition of visual targets in about two seconds average response time at 17 degrees accuracy. During the in-flight experiments, pilots correctly identified ground targets 50, 75, and 100 percent of the time at separation angles of 12, 20, and 35 degrees, respectively. In general, pilot performance in the field with the 3-D audio display generator was as expected, based on data from laboratory experiments.

Ericson, Mark↗
NASA NTRS1996

Recent Laboratory and Numerical Trailing Vortex Studies

Results from two laboratory studies and two numerical studies are presented. In the first laboratory study, measurements of the strength of vortices from a three-dimensional (3-D) model wing are presented. The measurements follow the vortices as they evolve in time from a two-dimensional (2-D) line vortex pair to the development and migration of 3-D vortex rings. It is shown that the resulting vortex rings can contain up to 40 percent of the initial vortex circulation. Thus, the formation of vortex rings may not necessarily signal the end of the wake hazard to following aircraft. In the second laboratory study, we present the results of an experiment which shows how the spanwise drag distribution affects wake-vortex evolution. In this experiment, we modified the spanwise drag distribution on a model wing while keeping the total lift and drag constant. The results show that adding drag on or near the centerline of the wing has a larger effect than adding drag at or near the wingtips. These measurements complement the results of NASA studies in the 1970s. In the first numerical study, results of 3-D numerical calculations are presented which show that the vortex Reynolds number has a significant influence on the evolution and migration of wake vortices. When the Reynolds number is large, 3-D vortex rings evolve from the initially 2-D line vortex pairs. These vortex rings then migrate vertically. When the Reynolds number is lower, the transition of vorticity from 2-D to 3-D is delayed. When the Reynolds number is very low, the vortices never transition to 3-D, and the vertical migration is significantly reduced. It is suggested that this effect may have been important in previous laboratory wake-evolution studies. A second numerical study shows the influence that vertical wind shear can have on trailing vortex evolution.

Delisi, Donald P.↗
NASA NTRS1997

Laboratory Plasma Source as an MHD Model for Astrophysical Jets

The significance of the work described herein lies in the demonstration of Magnetized Coaxial Plasma Gun (MCG) devices like CPS-1 to produce energetic laboratory magneto-flows with embedded magnetic fields that can be used as a simulation tool to study flow interaction dynamic of jet flows, to demonstrate the magnetic acceleration and collimation of flows with primarily toroidal fields, and study cross field transport in turbulent accreting flows. Since plasma produced in MCG devices have magnetic topology and MHD flow regime similarity to stellar and extragalactic jets, we expect that careful investigation of these flows in the laboratory will reveal fundamental physical mechanisms influencing astrophysical flows. Discussion in the next section (sec.2) focuses on recent results describing collimation, leading flow surface interaction layers, and turbulent accretion. The primary objectives for a new three year effort would involve the development and deployment of novel electrostatic, magnetic, and visible plasma diagnostic techniques to measure plasma and flow parameters of the CPS-1 device in the flow chamber downstream of the plasma source to study, (1) mass ejection, morphology, and collimation and stability of energetic outflows, (2) the effects of external magnetization on collimation and stability, (3) the interaction of such flows with background neutral gas, the generation of visible emission in such interaction, and effect of neutral clouds on jet flow dynamics, and (4) the cross magnetic field transport of turbulent accreting flows. The applicability of existing laboratory plasma facilities to the study of stellar and extragalactic plasma should be exploited to elucidate underlying physical mechanisms that cannot be ascertained though astrophysical observation, and provide baseline to a wide variety of proposed models, MHD and otherwise. The work proposed herin represents a continued effort on a novel approach in relating laboratory experiments to astrophysical jet observation. There exists overwhelming similarity among these flows that has already produced some fascinating results and is expected to continue a high pay off in future flow similarity studies.

Mayo, Robert M.↗
NASA NTRS1999

Exotic Molecules in Space: A Coordinated Astronomical Laboratory and Theoretical Study

The past three years have been a period of great progress in our laboratory investigation of molecules of astrophysical interest-the most productive by far in the 20-year history of a research program which has led to the discovery of over 20% of the 123 known interstellar and circumstellar molecules. Most of the discoveries made during this period have been the result of the construction in late 1995 and early 1996 of a Fourier transform microwave spectrometer working in the centimeter-wave band. The sensitivity of this instrument from the moment that it was turned on has exceeded our expectations by an order of magnitude. The Table below shows the 46 new molecules which have been discovered. Most are carbon chains, the dominant type of molecule which has been found in space. Several comments with respect to these molecules should be made: 1. There are probably no mistakes in any of the identifications, since these have been confirmed by the standard, powerful assays and tests used to check spectroscopic identifications: isotopic substitution, quantum calculations of the expected molecular structures, detection of hyperfine structure, Zeeman effect, etc. 2. The radio laboratory astrophysics of the entire set is complete for the time being, in the sense that essentially all the astronomically interesting radio transitions (including hfs when present) are either directly measured or can now be calculated from the derived spectroscopic constants to better than 1 part per million (or 0.3 km s-1 in radial velocity, and often much better than that). 3. Six of the forty six new molecules have already been identified in space, in every case but one on the basis of our laboratory measurements. 4. Sensitive as they are, our laboratory techniques are far from fundamental limits on sensitivity, and 5. One of the principal motivations of our research is to close the fairly small mass and size gap, now only a factor of a few, between the smallest postulated interstellar grains and the largest identified interstellar molecules.

Thaddeus, Patrick↗
NASA NTRS2000

Laboratory Astrophysics Using a Spare XRS Microcalorimeter

The XRS instrument on Astro-E is a fully self-contained microcalorimeter x-ray instrument capable of acquiring optimally filtering, and characterizing events for 32 independent pixels. With the launch of the Astro-E spacecraft, a full flight spare detector system has been integrated into a laboratory cryostat for use on the electron beam ion trap (EBIT) at Lawrence Livermore National Laboratory. The detector system contains a microcalorimeter array with 32 instrumented pixels heat sunk to 60 mK using an adiabatic demagnetization refrio,erator. The instrument has a composite resolution of 8eV at 1 keV and 12eV at 6 keV with a minimum of 95% quantum efficiency. This will allow high spectral resolution, broadband observations of collisionally excited plasmas which are produced in the EBIT experiment. Unique to our instrument are exceptionally well characterized 1000 Angstrom thick aluminum on polyimide infrared blocking filters. The detailed transmission function including the edc,e fine structure of these filters has been measured in our laboratory using an erect field grating spectrometer. This will allow the instrument to perform the first broadband absolute flux measurements with the EBIT instrument. The instrument performance as well as the results of preliminary measurements will be discussed. Work performed under the auspices of the U.S. D.o.E. by Lawrence Livermore National Laboratory under contract W-7405-ENG-48 and was supported by the NASA High Energy Astrophysics Supporting Research and Technology Program.

Audley, M. Damian↗
NASA NTRS2000

Laboratory Astrophysics: The Universe in the Palm of Your Hand

Polycyclic aromatic compounds (PACs), a class of organic molecules whose structures are characterized by the presence of two or more fused aromatic rings, have been the subject of astrophysical interest for nearly two decades. Large by interstellar standards (from as few as 20 to perhaps as many as several hundred atoms), it has been suggested that these species are among the most abundant interstellar molecules impacting a wide range of astrophysical phenomena including: (1) the ubiquitous family of infrared emission bands observed in an ever-increasing assortment of astronomical objects; (2) the subtle but rich array of discrete visible/near-infrared interstellar molecular absorption features known as the diffuse interstellar bands (DIBs); (3) the broad near-infrared quasi-continuum observed in a number of nebulae known as excess red emission (ERE); (4) the interstellar ultraviolet extinction curve and broad '2200 Angstrom bump'; and (5) the heating/cooling mechanisms of interstellar clouds. Nevertheless, until recently a lack of good-quality laboratory spectroscopic data on PACs under astrophysically relevant conditions (i.e. isolated, ionized molecules, ionized molecular clusters, etc.) has hindered critical evaluation and extension of this model. Fortunately, the last decade has seen an explosion of experimental and theoretical techniques aimed specifically at addressing these issues. Indeed, many of these techniques will be explored in the series of talks which constitute this forum. This talk will provide an overview of the studies of the spectroscopic properties of isolated, neutral, and ionized PACs that have been conducted in the Astrochemistry Laboratory at NASA Ames, together with a consideration of their implications for astrophysics. Particular attention will be paid to models of the interstellar infrared emission spectra generated using the available database of laboratory PAC infrared spectra and the natural ability of this database to accommodate the variations observed in the astronomical spectra. Such models provide insight into the structure, abundance, and ionization state of the interstellar PAC population and, in turn, provide direct insight into the processes of carbon nucleation, growth and evolution as matter is processed through the interstellar medium. These models will be followed by a more in depth look at some specific aspects of the interstellar infrared emission spectrum, considering both what we can learn about them and what we can learn from them. Finally, some of the limitations of the current model and the available spectroscopic dataset will be 'dered along with future experimental directions designed to address these shortcomings. Further information about this and the related areas of research currently ongoing in the Astrochemistry Laboratory can be found at our world wide web site. http://www-space.arc.nasa.gov/(tilda)astrochem

Hudgins, Douglas M.↗