SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We present a novel method for estimating the surface horizontal velocity on ice shelves using laser altimetrydata from the Ice Cloud and land Elevation Satellite (ICESat; 20032009). The method matches undulations measured at crossover points between successive campaigns.
The 27-day variations of topside ionosphere are investigated using the in-situ electron density measurements from the CHAMP planar Langmuir probe and GRACE K-band ranging system. As the two satellite systems orbit at the altitudes of approx. 370 km and approx. 480 km, respectively, the satellite data sets are greatly valuable for examining the electron density variations in the vicinity of F2-peak. In a 27-day period, the electron density measurements from the satellites are in good agreements with the solar flux, except during the solar minimum period. The time delays are mostly 1-2 day and represent the hemispherical asymmetry. The globally-estimated spatial patterns of the correlation between solar flux and in-situ satellite measurements show poor correlations in the (magnetic) equatorial region, which are not found from the ground measurements of vertically-integrated electron content. We suggest that the most plausible cause for the poor correlation is the vertical movement of ionization due to atmospheric dynamic processes that is not controlled by the solar extreme ultraviolet radiation.
Abstract Permittivity sensing is a critically important analytical tool for bioscience, environmental, and industrial applications. The response time for commonly used plasmonic permittivity sensors is fundamentally set by the reaction kinetics of chemically adsorbed analytes. In this work, the proposal is to overcome this limit by combining plasmonic sensors with phase transition materials possessing a rapid amplified electrostatic response such as quadrupole moment induced molecular helix reversal. As a proof‐of‐concept, rapid sensing of CO 2 on a phase transition polytetrafluoroethylene substrate and amplification of permittivity response in plasmonic Fabry–Perot sensor is shown. The demonstrated universal approach holds promise for a wide range of applications in fast, real time sensing and monitoring of biological and environmental processes.
Herein, the impacts of the selective halogenation at two different positions of dicyanomethylene-3-indanone (IC) end groups and inner side chains of small molecular acceptors (SMAs) on the P D :SMA interfacial interactions, blend morphology, and resulting photovoltaic properties are described. In this study, four different SMAs (A1, A2, A3, and A4) with the same molecular backbone, but with different degrees of halogenation, are synthesized. The IC end groups on the backbones of the A1 and A3, and A2 and A4 SMAs are chlorinated and fluorinated, respectively; in addition, 6-phenoxyhexyl inner side chains of the A3 and A4 are chlorinated. The SMAs are paired with a chlorinated PBDT-Cl PD to construct organic solar cells (OSCs). The PBDT-Cl:A4-based OSC exhibits the highest power conversion efficiency of 17.2%, outperforming the PBDT-Cl:A1-(13.3%), PBDT-Cl:A2-(15.6%), and PBDT-Cl:A3-based OSC (16.5%). The Cl atoms on the side chains in the A3 and A4 SMAs enhance the molecular/energetic interactions at the P D :SMA interfaces and improve the blend morphology in terms of domain purity and spacing. These effects lead to the improved fill factors and reduced voltage loss of the PBDT-Cl:A3- and PBDT-Cl:A4-based OSCs. This study demonstrates the importance of appropriate halogenation of SMAs in optimizing the blend morphology, reducing voltage loss, and improving OSC performance.
Abstract A dual‐function photoelectrochemical (PEC) separation system is demonstrated for rare‐earth element (REE) recovery. The sustainable release of the captured REEs is promoted through the synergistic integration of a redox‐reaction for electrostatic repulsion, and in situ proton generation for ion‐exchange, all driven by photoelectrochemistry. The platform consists of a redox‐copolymer, poly(ferrocenylpropyl methacrylamide‐ co ‐methacrylic acid) (P(FPMAm‐ co ‐MAA)) (PFM), conjugated with carbon nanotubes (CNTs) and coated onto titanium dioxide nanorods (TNRs). The (PFM‐CNT)/TNR spontaneously adsorbs up to 214.2 mg of Yttrium/g PFM by ion‐exchange, and demonstrates broad applicability for other REEs. The adsorbed REEs are released through the PEC oxidation of ferrocene (Fc) to ferrocenium (Fc + ), and the simultaneous PEC water splitting reactions at the TNRs that protonate the carboxylate binding groups. This dual photoelectrochemically‐driven mechanism for REE release is investigated by in situ pH measurements, as well as vibrational and X‐ray photoelectron spectroscopy. Through PEC approaches, a 68.8% reduction in energy consumption during REE recovery has been achieved compared to purely electrochemical systems, with a regeneration efficiency close to 100%. For NdFeB magnets from waste hard disk drives, Nd and Dy recovery efficiencies of 59.2 and 61.1% are achieved. The dual‐functionality of these copolymer PEC systems offers a sustainable platform for modulating critical element recovery.
Abstract Terrace‐edges, which are step‐like height discontinuities formed during layer stacking or exfoliation, can locally modify magnetic characteristics. Magnetic domain behavior and its structural dependence in a 2D van der Waals (vdW) heterostructure composed of two distinct room‐temperature ferromagnets: Fe 3 GaTe 2 , an intrinsic vdW ferromagnet, and vanadium‐doped WSe 2 , a transition metal dichalcogenide exhibiting defect‐induced magnetism, is investigated. Using magnetic transmission X‐ray microscopy, the formation and annihilation of magnetic domains are directly observed and it is found that domains preferentially form at terrace‐edges of the heterostructure. Micromagnetic simulations reveal that in‐plane magnetization tilting near the terrace‐edge results in a localized maximum in total magnetic energy that promotes domain formation. The findings highlight the significant role of structural edge features and interfacial magnetic interactions in determining domain formation in hybrid 2D vdW magnetic systems, offering a new route to spatially controlled magnetization at room temperature.
Topological solitons have knotted continuous field configurations embedded in a uniform background, and occur in cosmology, biology, and electromagnetism. However, real-time observation of their morphogenesis and dynamics is still challenging because their size and timescale are enormously large or tiny. Liquid crystal (LC) structures are promising candidates for a model-system to study the morphogenesis of topological solitons, enabling direct visualization due to the proper size and timescale. We report a new way is found to rationalize the real-time observation of the generation and transformation of topological solitons using cholesteric LCs confined in patterned substrates. The experimental demonstration shows the topologically protected structures arise via the transformation of topological defects. Numerical modeling based on minimization of free energy closely reconstructs the experimental findings. The fundamental insights obtained from the direct observations pose new theoretical challenges in understanding the morphogenesis of different types of topological solitons within a broad range of scales.
Abstract Sensing technologies based on plasmonic nanomaterials are of interest for various chemical, biological, environmental, and medical applications. In this work, an incorporation strategy of colloidal plasmonic nanoparticles (pNPs) in microporous polymer for realizing distinct sorption‐induced plasmonic sensing is reported. This approach is demonstrated by introducing tin‐doped indium oxide pNPs into a polymer of intrinsic microporosity (PIM‐1). The composite film (pNPs‐polymer) provides distinct and tunable optical features on the fiber optic (FO) platform that can be used as a signal transducer for gas sensing (e.g., CO 2 ) under atmospheric conditions. The resulting pNPs‐polymer composite demonstrates high sensitivity response on FO in the evanescent field configuration, provided by the dramatic response of modes above the total‐internal‐reflection angle. Furthermore, by varying the pNPs content in the polymer matrix, the optical behavior of the pNPs‐polymer composite film can be tuned to affect the operational wavelength by over several hundred nanometers and the sensitivity of the sensor in the near‐infrared range. It is also shown that the pNPs‐polymer composite film exhibits remarkable stability over a period of more than 10 months by mitigating the physical aging issue of the polymer.
There is growing interest in material candidates with properties that can be engineered beyond traditional design limits. Compositionally complex oxides (CCO), often called high entropy oxides, are excellent candidates, wherein a lattice site shares more than four cations, forming single-phase solid solutions with unique properties. However, the nature of compositional complexity in dictating properties remains unclear, with characteristics that are difficult to calculate from first principles. Here, in this study, compositional complexity is demonstrated as a tunable parameter in a spin-transition oxide semiconductor La 1- x (Nd, Sm, Gd, Y) x/4 CoO 3 , by varying the population x of rare earth cations over 0.00≤ x≤ 0.80. Across the series, increasing complexity is revealed to systematically improve crystallinity, increase the amount of electron versus hole carriers, and tune the spin transition temperature and on-off ratio. At high a population (x = 0.8), Seebeck measurements indicate a crossover from hole-majority to electron-majority conduction without the introduction of conventional electron donors, and tunable complexity is proposed as new method to dope semiconductors. First principles calculations combined with angle resolved photoemission reveal an unconventional doping mechanism of lattice distortions leading to asymmetric hole localization over electrons. Thus, tunable complexity is demonstrated as a facile knob to improve crystallinity, tune electronic transitions, and to dope semiconductors beyond traditional means.
The development of a nonprecious, stable, and highly effective electrocatalyst for decomposition of water into oxygen and hydrogen is vitally important for sustainable energy conversion, but it still remains challenging to replace the noble metal electrocatalysts with more economically viable alternatives. Here, in this paper, a polyaniline (PANI) decorated hierarchical nickel cobalt thiospinel (NiCo 2 S 4 ) hybrid catalyst (NCS-P) has been developed that shows enhanced dual catalytic activity for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) compared to pristine NiCo 2 S 4 (NCS). Benefiting from the conductive PANI coating, the hierarchical NCS-P nanostructure exhibits outstanding electrocatalytic activity in alkaline solution with low overpotentials of 273 ± 3 and 77 ± 4 mV at 10 mA cm -2 and low Tafel slopes of 42.2 and 68.5 mV dec -1 for OER and HER, respectively, which are better than those of the benchmark noble-metal-based RuO 2 and Pt/C.
Mechanochromic photonic materials present promising prospects for enhancing diverse facets of human life. Cholesteric liquid crystal elastomers (CLCEs) present immediate mechanochromic properties, allowing their utility in various fields, including camouflages, textiles, and anticounterfeiting. Nonetheless, it is essential to provide differentiated color information corresponding to diverse types and degrees of deformation for practical use in real life. Herein, the mechanochromic responses of CLCEs are investigated using their optical rotation under compression and uniaxial stretching. The CLCEs exhibit the same reflection colors indistinguishable for compression and uniaxial stretching due to their contracted pitches. In contrast, the linearly polarized light passing through deformed CLCEs can be modulated by optical rotation, resulting in distinct transmission colors that can be discerned through mechanical deformations. A visual signaling system with color information derived from optical rotation is demonstrated. By comprehending and manipulating the mechanoresponsive behavior of CLCEs, these materials can be advanced into innovative solutions with enhanced functionality and performance, thereby broadening their applications for human life enhancement.
All-polymer solar cells (all-PSCs) are a highly attractive class of photovoltaics for wearable and portable electronics due to their excellent morphological and mechanical stabilities. Recently, new types of polymer acceptors (P A s) consisting of non-fullerene small molecule acceptors (NFSMAs) with strong light absorption have been proposed to enhance the power conversion efficiency (PCE) of all-PSCs. However, polymerization of NFSMAs often reduces entropy of mixing in PSC blends and prevents the formation of intermixed blend domains required for efficient charge generation and morphological stability. One approach to increase compatibility in these systems is to design P A s that contain the same building blocks as their polymer donor (P D ) counterparts. Here, a series of NFSMA-based P A s [P(BDT2BOY5-X), (X = H, F, Cl)] are reported, by copolymerizing NFSMA (Y5-2BO) with benzodithiophene (BDT), a common donating unit in high-performance P D s such as PBDB-T. All-PSC blends composed of PBDB-T PD and P(BDT2BOY5-X) P A show enhanced molecular compatibility, resulting in excellent morphological and electronic properties. Specifically, PBDB-T:P(BDT2BOY5-Cl) all-PSC has a PCE of 11.12%, which is significantly higher than previous PBDB-T:Y5-2BO (7.02%) and PBDB-T:P(NDI2OD-T2) (6.00%) PSCs. Additionally, the increased compatibility of these all-PSCs greatly improves their thermal stability and mechanical robustness. For example, the crack onset strain (COS) and toughness of the PBDB-T:P(BDT2BOY5-Cl) blend are 15.9% and 3.24 MJ m -3 , respectively, in comparison to the PBDB-T:Y5-2BO blends at 2.21% and 0.32 MJ m -3 .
Abstract The commercialization of organic solar cells (OSCs) requires both high power conversion efficiency (PCE) and long‐term stability. However, the lifetime of the OSCs containing small‐molecule acceptors (SMA) should be significantly enhanced. In this study, a series of planarity‐controlled is developed, high electron mobility dimerized SMAs (DSMAs) and realize OSCs with high‐performance (PCE = 18.8%) and high‐stability ( t 80% lifetime = 5380 h under 1‐Sun illumination). An acetylene linker with a planar triple bond is designed for dimerization of SMA units to afford the high backbone planarity necessary to achieve high crystallinity and electron mobility. To further engineer the molecular conformation and electron mobility of the DSMAs, different regioisomers of a Y‐based SMA are dimerized to yield three regioisomerically distinct DSMAs, denoted as DYA‐I, DYA‐IO, and DYA‐O, respectively. It is found that the crystallinity, electron mobility, and glass transition temperature of the DSMAs gradually increase in the order of DYA‐O, DYA‐IO, and DYA‐I, which, in turn, enhance the PCE and device stability of the resulting OSCs; DYA‐O (PCE = 16.45% and t 80% lifetime = 3337 h) < DYA‐IO (PCE = 17.54% and t 80% lifetime = 4255 h) < DYA‐I (PCE = 18.83% and t 80% lifetime = 5380 h).
Abstract Endohedral metallofullerenes (EMFs) are excellent carriers of rare‐earth element (REE) ions in biomedical applications because they preclude the release of toxic metal ions. However, existing approaches to synthesize water‐soluble EMF derivatives yield mixtures that inhibit precise drug design. Here we report the synthesis of metallobuckytrio (MBT), a three‐buckyball system, as a modular platform to develop structurally defined water‐soluble EMF derivatives with ligands by choice. Demonstrated with PEG ligands, the resulting water‐soluble MBTs show superb biocompatibility. The Gd MBTs exhibit superior T 1 relaxivity than typical Gd complexes, potentially superseding current clinical MRI contrast agents in both safety and efficiency. The Lu MBTs generated reactive oxygen species upon light irradiation, showing promise as photosensitizers. With their modular nature to incorporate other ligands, we anticipate the MBT platform to open new paths towards bio‐specific REE drugs.
Abstract Endohedral metallofullerenes (EMFs) are excellent carriers of rare‐earth element (REE) ions in biomedical applications because they preclude the release of toxic metal ions. However, existing approaches to synthesize water‐soluble EMF derivatives yield mixtures that inhibit precise drug design. Here we report the synthesis of metallobuckytrio (MBT), a three‐buckyball system, as a modular platform to develop structurally defined water‐soluble EMF derivatives with ligands by choice. Demonstrated with PEG ligands, the resulting water‐soluble MBTs show superb biocompatibility. The Gd MBTs exhibit superior T 1 relaxivity than typical Gd complexes, potentially superseding current clinical MRI contrast agents in both safety and efficiency. The Lu MBTs generated reactive oxygen species upon light irradiation, showing promise as photosensitizers. With their modular nature to incorporate other ligands, we anticipate the MBT platform to open new paths towards bio‐specific REE drugs.
5-Hydroxymethylfurfural (HMF), which can be derived from lignocellulosic biomass, is an important platform molecule that can be used to produce valuable biofuels and polymeric materials. Electrochemical reduction of HMF is of great interest as it uses water as the hydrogen source and achieves desired reduction reactions at room temperature and ambient pressure. Hydrogenation and hydrogenolysis are two important reactions for reductive HMF conversion. Therefore, elucidating key characteristics of electrocatalysts that govern the selectivity for hydrogenation and hydrogenolysis is critical in rationally developing efficient and selective electrocatalysts. Here in this study, combined experimental and computational investigations are used to demonstrate how the adsorption energy of HMF on metal surfaces and the resulting changes in the intramolecular bond lengths of adsorbed HMF directly impact the reduction pathways of HMF. These results make it possible to rationally understand a general trend in the behaviors observed when using various metal electrodes for HMF reduction.
In their Editorial to the Special Issue on The Chemistry of Waste Plastics Upcycling, the Guest Editors Adam Guss, George Huber, Carol Lin, Xianzhi Meng, Hugh O'Neill, Arthur Ragauskas, Jia Wang, Yanqin Wang, and Frederik Wurm highlight some of the increasingly urgent efforts being made by chemists to address challenges related to the fate of plastics at the end of, their useful lives and the valorization of plastic waste.
Polyethylene (PE) waste is a challenge to upcycle into useful materials because this plastic tends to decompose into volatile compounds when heated at relatively low temperatures. In this work, mixtures of PE wastes into a hybrid graphitic porous carbon (HGPC) by a thermal oxidation pretreatment step, with assistance of an inert solid additive (KCl), to functionalize, crosslink, and stabilize the PE waste followed by carbonization and catalytic graphitization steps with a potassium carbonate catalyst, are upcycled. The PE waste‐derived HGPC (PW‐HGPC) has a hybrid structure composed of graphene‐like carbon nanosheets grown on the surface of carbon particles, high porosity with specific surface area, up to 1,763 m 2 g −1 , and good graphitic degree with average Raman I 2D / I G ratios of 0.53. When used as cathode material for zinc‐ion hybrid capacitors, this PW‐HGPC exhibits an excellent specific capacity, up to 126.7 mAh g −1 , at high mass loading of 10 mg cm −2 . Moreover, PW‐HGPC exhibits remarkable cycling stability with capacity retention of >94% after 10 000 cycles. Additionally, the KCl is recycled and reused over five times. This method provides a new solution for upcycling PE wastes into high value‐added carbon materials, not only for zinc‐ion hybrid capacitors but also for other electrochemical energy storage device applications.