Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Jet Surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Experimental and Numerical Evaluation of the Thermal-Fluid Characteristics of the Helium-Cooled Modular Divertor with Multiple Jets Using a Reversed Heat Flux Approach

A single-finger unit of the Helium-Cooled Modular Divertor with Multiple Jets (HEMJ) with a plasma-facing surface (PFS) area of about 2 cm 2 has been studied in a helium (He) loop at He mass flow rates m˙ H ≤ 8 g/s and nearly prototypical conditions. Based on previous studies of the single finger of the HEMJ, our Georgia Institute of Technology group is planning to experimentally study larger divertors. Given that the HEMJ test section was heated with an induction heater and that it is impractical to scale this up to divertors with larger PFS areas, a reversed heat flux approach is being considered to measure heat transfer coefficients (HTCs). In this approach, the direction of the heat flux is reversed with water cooling and high-temperature He heating of the outer shell attached to the PFS. This work presents an initial experimental and numerical evaluation of this approach for a single HEMJ finger. Experiments with brass and copper-chromium-zirconium outer shells were conducted at dimensionless He mass flow rates or Reynolds numbers Re = 1 × 10 4 to 4.7 × 10 4 , an inlet pressure of 10 MPa, temperatures as great as 673 K, and maximum heat flux of 8.4 MW/m 2 . The experiments verify that the He-side HTCs are independent of the direction of the heat flux. Here, the results agree well with previous Nusselt number correlation and pressure loss coefficients for the HEMJ obtained using the normal heating approach.

42 ENGINEERING↗
DOE OSTI2023

High-energy neutrino emission from magnetized jets of rapidly rotating protomagnetars

ABSTRACT Relativistic jets originating from protomagnetar central engines can lead to long duration gamma-ray bursts (GRBs) and are considered potential sources of ultra-high-energy cosmic rays and secondary neutrinos. We explore the propagation of such jets through a broad range of progenitors, from stars which have shed their envelopes to supergiants which have not. We use a semi-analytical spin-down model for the strongly magnetized and rapidly rotating protoneutron star (PNS) to investigate the role of central engine properties such as the surface dipole field strength, initial rotation period, and jet opening angle on the interactions and dynamical evolution of the jet-cocoon system. With this model, we determine the properties of the relativistic jet, the mildly relativistic cocoon, and the collimation shock in terms of system parameters such as the time-dependent jet luminosity, injection angle, and density profile of the stellar medium. We also analyse the criteria for a successful jet breakout, the maximum energy that can be deposited into the cocoon by the relativistic jet, and structural stability of the magnetized outflow relative to local instabilities. Lastly, we compute the high-energy neutrino emission as these magnetized outflows burrow through their progenitors. Precursor neutrinos from successful GRB jets are unlikely to be detected by IceCube, which is consistent with the results of previous works. On the other hand, we find that high-energy neutrinos may be produced for extended progenitors like blue and red supergiants, and we estimate the detectability of neutrinos with next generation detectors such as IceCube-Gen2.

Astronomy & Astrophysics↗
DOE OSTI2021

Increasing large wildfires over the western United States linked to diminishing sea ice in the Arctic

Abstract The compound nature of large wildfires in combination with complex physical and biophysical processes affecting variations in hydroclimate and fuel conditions makes it difficult to directly connect wildfire changes over fire-prone regions like the western United States (U.S.) with anthropogenic climate change. Here we show that increasing large wildfires during autumn over the western U.S. are fueled by more fire-favorable weather associated with declines in Arctic sea ice during preceding months on both interannual and interdecadal time scales. Our analysis (based on observations, climate model sensitivity experiments, and a multi-model ensemble of climate simulations) demonstrates and explains the Arctic-driven teleconnection through regional circulation changes with the poleward-shifted polar jet stream and enhanced fire-favorable surface weather conditions. The fire weather changes driven by declining Arctic sea ice during the past four decades are of similar magnitude to other leading modes of climate variability such as the El Niño-Southern Oscillation that also influence fire weather in the western U.S.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Elucidating size effects on the yield strength of single-crystal Cu via the Richtmyer–Meshkov instability

Capturing the dynamic response of a material under high strain-rate deformation often demands challenging and time consuming experimental effort. While shock hydrodynamic simulation methods can aid in this area, a priori characterizations of the material strength under shock loading and spall failure are needed in order to parameterize constitutive models needed for these computational tools. Moreover, parameterizations of strain-rate-dependent strength models are needed to capture the full suite of Richtmyer–Meshkov instability (RMI) behavior of shock compressed metals, creating an unrealistic demand for these training data solely on experiments. Herein, we sweep a large range of geometric, crystallographic, and shock conditions within molecular dynamics (MD) simulations and demonstrate the breadth of RMI in Cu that can be captured from the atomic scale. In this work, yield strength measurements from jetted and arrested material from a sinusoidal surface perturbation were quantified as Y RMI = 0.787 ± 0.374 GPa, higher than strain-rate-independent models used in experimentally matched hydrodynamic simulations. Defect-free, single-crystal Cu samples used in MD will overestimate Y RMI , but the drastic scale difference between experiment and MD is highlighted by high confidence neighborhood clustering predictions of RMI characterizations, yielding incorrect classifications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Deciphering yield modification of hadron-triggered semi-inclusive recoil jets in heavy-ion collisions

Jet quenching is recognized as critical evidence for the existence of the quark-gluon plasma (QGP) and serves as an essential probe to study its transport properties. Measurements of hadron-triggered semi-inclusive recoil jets have gained popularity due to its capability to probe jets over an extended phase space at low transverse momenta (p T ) and large radii. Recent ALICE measurements showed that the I AA , yield ratio of recoil jets between heavy-ion and p+p collisions, rises with jet p T and exceeds unity at high p T , contradicting conventional expectations that jet quenching should result in I AA values less than one. In this contribution, we re-examine the surface bias and study the effects of energy losses for both trigger hadrons and recoil jets on I AA , employing the Linear Boltzmann Transport (LBT) model to simulate jet-medium interactions. Our findings suggest that a large portion of hadrons used for the triggers undergoes substantial energy loss, despite surface bias. In particular, the energy loss of the trigger hadrons elevates the I AA baseline, corresponding to the case of no energy loss for recoil jets, to be greatly larger than unity. This enhancement of the baseline implies that the measured I AA values being larger than unity could still signal jet quenching.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

The role of the droplet interface in controlling the multiphase oxidation of thiosulfate by ozone

Predicting reaction kinetics in aqueous microdroplets, including aerosols and cloud droplets, is challenging due to the probability that the underlying reaction mechanism can occur both at the surface and in the interior of the droplet. Additionally, few studies directly measure the surface activities of doubly charged anions, despite their prevalence in the atmosphere. Here, deep-UV second harmonic generation spectroscopy is used to probe surface affinities of the doubly charged anions thiosulfate, sulfate, and sulfite, key species in the thiosulfate ozonation reaction mechanism. Thiosulfate has an appreciable surface affinity with a measured Gibbs free energy of adsorption of -7.3 ± 2.5 kJ mol -1 in neutral solution, while sulfate and sulfite exhibit negligible surface propensity. The Gibbs free energy is combined with data from liquid flat jet ambient pressure X-ray photoelectron spectroscopy to constrain the concentration of thiosulfate at the surface in our model. Stochastic kinetic simulations leveraging these novel measurements show that the primary reaction between thiosulfate and ozone occurs at the interface and in the bulk, with the contribution of the interface decreasing from ~65% at pH 5 to ~45% at pH 13. Additionally, sulfate, the major product of thiosulfate ozonation and an important species in atmospheric processes, can be produced by two different pathways at pH 5, one with a contribution from the interface of >70% and the other occurring predominantly in the bulk (>98%). The observations in this work have implications for mining wastewater remediation, atmospheric chemistry, and understanding other complex reaction mechanisms in multiphase environments. Future interfacial or microdroplet/aerosol chemistry studies should carefully consider the role of both surface and bulk chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The electric fields and “lightning jets” of the Sun and solar wind

A model of electric energization of the solar wind and corona is developed, including electro-magnetic particle effects precluded by traditional magneto-hydro (MHD) assumptions. Using standard 1D radial solar models for particle density and temperature, the core gravito-electric field is calculated; and the range of possible photospheric photo-electric fields is estimated. The extant DC field apparently arises from about 460 C of charge displacement, mainly caused by the immense solar energy flux pushing electrons outward. Energetically, this electric field can accelerate surface protons out of the 2 keV gravity well and up to the 4 keV energies observed in the fast solar wind. The electrical energy is released in pervasive, persistent “proton lightning jets,” which are proton beams, charge-neutralized by co-propagating electrons. The jets are formed by pinched “avalanche breakdown” of the weakly ionized photosphere, probably initiated on the down-welling edges of solar surface granulations. These energetic jets will glow as discrete filamentary surface spicules and will be observed in reflected solar light as the diffuse K-corona. Significantly, the total charge displacement and observed fast wind speed are quantitatively predicted by a novel “virial limit”: the (positive) electrical potential energy at r = 0 is limited in magnitude to the 10 keV gravitational well at r = 0.

Physics↗
DOE OSTI2020

Multi-jet gas cooling of in-beam foils or specimens: CFD predictions of the convective heat-transfer coefficient

An experiment was designed to investigate the possible enhancement of the convective heat-transfer coefficient by utilizing multiple, parallel jets in the cooling of a small heated surface, such as typically induced by an accelerated ion beam on a thin foil or specimen. The hot spot was provided using a small electrically heated plate. It was found that heat-transfer calculations by means of simple empirical methods based on dimensional analysis are not useful in this case and that advanced computational fluid dynamics (CFD) modelling is essential to interpret the results. It is shown that enhanced convective cooling can indeed be obtained with a multi-jet configuration as compared to a single-jet configuration but only under very selective conditions. An improperly designed multi-jet configuration can also provide significantly reduced cooling relative to the single-jet case and the estimation of the behavior of any particular jet geometry is eminently non-intuitive. CFD provides acceptable quantitative results and seem to be the only tool available to gain an understanding of these complex flows where simple models and “rules of thumb” cannot be relied upon.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Experimental Observations of Laser-Driven Tin Ejecta Microjet Interactions

The study of high-velocity particle-laden flow interactions is of importance for the understanding of a wide range of natural phenomena, ranging from planetary formation to cloud interactions. Experimental observations of particle dynamics are sparse given the difficulty of generating high-velocity flows of many particles. Ejecta microjets are micron-scale jets formed by strong shocks interacting with imprinted surfaces to generate particle plumes traveling at several kilometers per second. As such, the interaction of two ejecta microjets provides a novel experimental methodology to study interacting particle streams. In this Letter, we report the first time sequences of x-ray radiography images of two interacting tin ejecta microjets taken on a platform designed for the OMEGA Extended Performance (OMEGA EP) laser. We observe that the microjets pass through each other unattenuated for the case of 11.7±3.2 GPa shock pressures and jet velocities of 2.2±0.5 km/s but show strong interaction dynamics for 116.0±6.1 GPa shock pressures and jet velocities of 6.5±0.5 km/s. Furthermore, we find that radiation-hydrodynamic simulations of the experiments are able to capture many aspects of the collisional behavior, such as the attenuation of jet velocity in the direction of propagation, but are unable to match the full spread of the strongly interacting cloud.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Emergence of a nocturnal low-level jet from a broad baroclinic zone

An analytical model is presented for the generation of a Blackadar-like nocturnal low-level jet in a broad baroclinic zone. The flow is forced from below (flat ground) by a surface buoyancy gradient and from above (free atmosphere) by a constant pressure gradient force. Diurnally-varying mixing coefficients are specified to increase abruptly at sunrise and decrease abruptly at sunset. With attention restricted to a surface buoyancy that varies linearly with a horizontal coordinate, the Boussinesq-approximated equations of motion, thermal energy, and mass conservation reduce to a system of one-dimensional equations that can be solved analytically. Sensitivity tests with southerly jets suggest that (i) stronger jets are associated with larger decreases of the eddy viscosity at sunset (as in Blackadar theory), (ii) the nighttime surface buoyancy gradient has little impact on jet strength, and (iii) for pure baroclinic forcing (no free-atmosphere geostrophic wind), the nighttime eddy diffusivity has little impact on jet strength, but the daytime eddy diffusivity is very important and has a larger impact than the daytime eddy viscosity. The model was applied to a jet that developed in fair weather conditions over the Great Plains from southern Texas to northern South Dakota on 1 May 2020. The ECMWF Reanalysis v5 (ERA5) for the afternoon prior to jet formation showed that a broad north-south-oriented baroclinic zone covered much of the region. The peak model-predicted winds were in good agreement with ERA5 winds and lidar data from the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility in north-central Oklahoma.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Ionization wave propagation in a He plasma jet in a controlled gas environment

Characterizing ionization wave propagation in low temperature plasma jets is critical to predicting production of reactive species and plasma–surface interactions for biomedical applications and surface functionalization. In this work, results from optical emission and laser induced fluorescence measurements of the ionization wave in a He plasma jet operating in a controlled gas environment are discussed and used for comparison with numerical modeling. Additionally, the ionization wave was observed using ICCD (Intensified Charge Coupled Device) imaging and characterized by time and spatially resolved electron density measurements using laser-collision-induced fluorescence. The plasma jet was initially characterized using pure He (nominally at 200 Torr), while varying pressure and voltage. When operating in pure He, the ionization wave broadly expands exiting the plasma tube. Increasing the operating pressure reduces the speed and isotropic expansion of the ionization wave. Furthermore, the jet operated with a humid He shroud was also studied. The humid He shroud results in the electron density increasing and having an annular profile due to the lower ionization potential of H2O compared to He and localized photoionization in the mixing region. Numerical modeling highlighted the importance of resonance radiation emitted by excited states of He, photoelectron emission from the quartz tube, and the kinetic behavior of the electrons produced by photoionization ahead of the ionization front.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Molecular beam scattering of neon from flat jets of cold salty water

Molecular beam scattering experiments are carried out to study collisions between Ne atoms (E i = 24.3 kJ mol-1) and the surface of a cold salty water (8 m LiBr(aq), 230 K) flat jet. Translational energy distributions are collected as a function of scattering angle using a rotatable mass spectrometer. Impulsive scattering and thermal desorption contribute to the overall scattering distributions, but impulsive scattering dominates at all three incidence angles explored. Highly super-specular scattering is observed in the impulsive scattering channel that is attributed to anisotropic momentum transfer to the liquid surface. The thermal desorption channel exhibits a cos θ angular distribution. Compared to Ne scattering from dodecane, fractional energy loss in the impulsive scattering channel is much larger across a wide range of deflection angles. A soft-sphere model is applied to investigate the kinematics of energy transfer between the scatterer and liquid surface. Fitting to this model yields an effective surface mass of 250-60 +100 amu and internal excitation of 11.8 ± 1.6 kJ mol-1, both of which are considerably larger than for Ne/dodecane. It thus appears that energy transfer to cold salty water is more efficient than to a dodecane liquid surface, a result attributed to the extensive hydrogen-bonded network of liquid water and roughness of the liquid surface.

Yang, Walt↗
DOE OSTI2023

Data-driven prediction of the output composition of an atmospheric pressure plasma jet

Cold atmospheric plasma (CAP) in open air hosts numerous chemical species engaged in thousands of chemical reactions. Comprehensive diagnosis of its chemical composition is important across various fields from medicine, where reactive oxygen and nitrogen play key roles, to surface modification. In applications, a centimeter-scale helium–air jet operates for minutes, featuring micrometer-sized streamers and an atmospheric pressure-induced collision frequency in the hundreds of GHz range. To address this intricate multi-scale issue, we introduce a machine learning approach: using a physics-informed neural network (PINN) to tackle the multi-scale complexities inherent in predicting the complete list of species concentrations, gas temperature, and electron temperature of a CAP jet supplied with a mixture of helium and air. Experimental measurements of O 3 , N 2 O, and NO 2 concentrations downstream of the plasma jet, combined with fundamental physics laws, the conservation of mass and charge, constrain the PINN, enabling it to predict the concentrations of all species that are not available from the experiment, along with gas and electron temperatures. The results, therefore, obey all the physical laws we provided and can have a chemical balance with the measured concentrations. In conclusion, this methodology holds promise for describing and potentially regulating complex systems with limited experimental datasets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Simulations suggest offshore wind farms modify low-level jets

Abstract. Offshore wind farms are scheduled to be constructed along the East Coast of the US in the coming years. Low-level jets (LLJs) – layers of relatively fast winds at low altitudes – also occur frequently in this region. Because LLJs provide considerable wind resources, it is important to understand how LLJs might change with turbine construction. LLJs also influence moisture and pollution transport; thus, the effects of wind farms on LLJs could also affect the region’s meteorology. In the absence of observations or significant wind farm construction as yet, we compare 1 year of simulations from the Weather Research and Forecasting (WRF) model with and without wind farms incorporated, focusing on locations chosen by their proximity to future wind development areas. We develop and present an algorithm to detect LLJs at each hour of the year at each of these locations. We validate the algorithm to the extent possible by comparing LLJs identified by lidar, constrained to the lowest 200 m, to WRF simulations of these very low LLJs (vLLJs). In the NOW-WAKES simulation data set, we find offshore LLJs in this region occur about 25 % of the time, most frequently at night, in the spring and summer months, in stably stratified conditions, and when a southwesterly wind is blowing. LLJ wind speed maxima range from 10 m s−1 to over 40 m s−1. The altitude of maximum wind speed, or the jet “nose”, is typically 300 m above the surface, above the height of most profiling lidars, although several hours of vLLJs occur in each month in the data set. The diurnal cycle for vLLJs is less pronounced than for all LLJs. Wind farms erode LLJs, as LLJs occur less frequently (19 %–20 % of hours) in the wind farm simulations than in the no-wind-farm (NWF) simulation (25 % of hours). When LLJs do occur in the simulation with wind farms, their noses are higher than in the NWF simulation: the LLJ nose has a mean altitude near 300 m for the NWF jets, but that nose height moves higher in the presence of wind farms, to a mean altitude near 400 m. Rotor region (30–250 m) wind veer is reduced across almost all months of the year in the wind farm simulations, while rotor region wind shear is similar in both simulations.

17 WIND ENERGY↗
DOE OSTI2023

High resolution, high conductivity components by aerosol jet printing

Highly conductive electrical traces formed over mechanical steps or on non-planar surfaces with linewidths of 10 to 100 μm and a method for forming such electrical traces are disclosed. The method employs two steps, with the first step using an aerosol jet printing (AJP) process to form thin electrical traces that serve as the seed layers for the second step. The first step preferably employs multiple passes with the AJP to create multiple seed sub-layers with improved continuity and conductivity. In the second step, the seed layers are subjected to an electrodeposition process that forms the bulk of the thickness of the electrical traces. The electrodeposition process may include one, two, or three phases at corresponding low or high biases, with low biases providing denser, more highly conductive plating sub-layers, while high biases provide plating sub-layers having better gap bridging properties.

Lavin, Judith Maria↗
DOE OSTI2022

Seasonally and Regionally Dependent Shifts of the Atmospheric Westerly Jets under Global Warming

A distinct feature of the atmospheric circulation response to increasing greenhouse gas forcing is the poleward shift of the zonal-mean westerly jet. The dynamical mechanisms of the zonal-mean poleward jet shift have been extensively studied in literature. At seasonal/regional scales, however, the westerly jets can shift equatorward, such as in the early-summer Asia–Pacific region, the late-winter America–Atlantic region, and the winter/spring east Pacific. These equatorward jet shifts imply climate impacts distinct from those of the poleward shifts, yet their causes are not well understood. In this work, based on a hierarchy of coupled, prescribed-SST, and aquaplanet simulations, we attribute the seasonal/regional equatorward jet shifts to the enhanced tropical upper-level warming (ETUW), which arises from both the tropical moist adiabat and the enhanced equatorial surface warming. By steepening the meridional temperature gradient in the subtropical upper-to-middle level and assisted by positive eddy feedback, the ETUW increases the zonal wind equatorward of the climatological jet. When the regional/seasonal meridional temperature gradients (or equivalently the westerly jets) are weak and peak close to the tropics, the ETUW effect overcomes the poleward jet-shift mechanisms and leads to the equatorward jet shifts. This climatological-state dependency is consistently seen in the decomposed jet responses to uniform warming and surface warming pattern, and further demonstrated through idealized aquaplanet experiments with designed climatological states. For uniform warming, the ETUW arising from moist adiabat makes the general poleward jet shifts insignificant in the aforementioned favorable regions/seasons. For warming pattern, the ETUW from enhanced equatorial warming drives substantial equatorward jet shifts in these favorable seasons/regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Air‐Ice‐Ocean Coupling During a Strong Mid‐Winter Cyclone: Observing Coupled Dynamic Interactions Across Scales

Abstract Arctic cyclones are key drivers of sea ice and ocean variability. During the 2019–2020 Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, joint observations of the coupled air‐ice‐ocean system were collected at multiple spatial scales. Here, we present observations of a strong mid‐winter cyclone that impacted the MOSAiC site as it drifted in the central Arctic pack ice. The sea ice dynamical response showed spatial structure at the scale of the evolving and translating cyclonic wind field. Internal ice stress and ocean stress play significant roles, resulting in timing offsets between the atmospheric forcing and the ice response and post‐cyclone inertial ringing in the ice and ocean. Ice motion in response to the wind field then forces the upper ocean currents through frictional drag. The strongest impacts to the sea ice and ocean from the passing cyclone occur as a result of the surface impacts of a strong atmospheric low‐level jet (LLJ) behind the trailing cold front and changing wind directions between the warm‐sector LLJ and post cold‐frontal LLJ. Impacts of the cyclone are prolonged through the coupled ice‐ocean inertial response. Local impacts of the approximately 120 km wide LLJ occur over a 12 hr period or less and at scales of a kilometer to a few tens of kilometers, meaning that these impacts occur at combined smaller spatial scales and faster time scales than most satellite observations and coupled Earth system models can resolve.

Meteorology & Atmospheric Sciences↗
DOE OSTI2021

Tuning plasma parameters to control reactive species fluxes to substrates in the context of plasma catalysis

The key reactive plasma-produced gas phase species responsible for the enhanced conversion of chemicals in plasma catalysis compared to thermal catalysis have to date not been identified. This outstanding question is mainly due to the inherent large variety of plasma-produced species and the challenge of controlling and measuring the flux of each constituent of the cocktail of reactive species to a (catalytic) substrate. In this paper, we explore the possibility to control the dominant reactive species fluxes, relevant for plasma-catalysis, to a substrate in the effluent of an RF driven Ar-O 2 plasma jet. The absolute species densities of the major reactive species (O, O 2 (a 1 Δ g ), O 3 and ions) were quantified by molecular beam mass spectrometry (MBMS) to assess the possibility of using treatment distance, O 2 admixture concentration, plasma dissipated power, RF modulation frequency and duty cycle as well as the feed gas flow rate to alter the dominant species densities. Selected experimental results were also compared with a pseudo-1D plug flow model. The short-lived and long-lived species can be effectively separated by changing the treatment distance and the RF modulation frequency. Furthermore, adjusting the O 2 admixture concentration enables to change the ratio of the O 2 (a 1 Δ g ) and O 3 density. The changes in the trend of ion and O flux were found to be very similar for nearly all investigated parameters. Nonetheless the gas flow rate was able to significantly change the ratio of the O and ion density in the plasma jet effluent. Here, the impact of the surface-dependent loss probability and boundary layer reactions on the species flux to a substrate and how this qualitatively relates to the MBMS density measurements is further addressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗