Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “J Division”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Shock Deformation in Zircon, a Comparison of Results from Shock-Reverberation and Single-Shock Experiments

The utility of the mineral zircon, ZrSiO4, as a shock-metamorphic geobarometer and geochronometer, has been steadily growing within the planetary science community. Zircon is an accessory phase found in many terrestrial rock types, lunar samples, lunar meteorites, martian meteorites and various other achondrites. Because zircon is refractory and has a high closure temperature for Pb diffusion, it has been used to determine the ages of some of the oldest material on Earth and elsewhere in the Solar System. Furthermore, major (O) and trace-element (REE, Ti, Hf) abundances and isotope compositions of zircon help characterize the petrogenetic environments and sources from which they crystallized. The response of zircon to impact-induced shock deformation is predominantly crystallographic, including dislocation creep and the formation of planar and sub-planar, low-angle grain boundaries; the formation of mechanical {112} twins; transformation to the high pressure polymorph reidite; the development of polycrystalline microtextures; and dissociation to the oxide constituents SiO2 and ZrO2. Shock microstructures can also variably affect the U- Pb isotope systematics of zircon and, in some instances, be used to constrain the impact age. While numerous studies have characterized shock deformation in zircon recovered from a variety of terrestrial impact craters and ejecta deposits and Apollo samples, experimental studies of shock deformation in zircon are limited to a handful of examples in the literature. In addition, the formation conditions (e.g., P, T) of various shock microstructures, such as planar-deformation bands, twins, and reidite lamellae, remain poorly con-strained. Furthermore, previous shocked-zircon experimental charges have not been analyzed using modern analytical equipment. This study will therefore under-take an new set of zircon shock experiments, which will then be microstructurally characterized using state-of-the-art instrumentation within the Astromaterials Research and Exploration Science Division (ARES), NASA Johnson Space Center.

Erickon, T. M.↗
DOE OSTI2026

Exploration of Neutron-Rich Isotopes around N = 50 via the In-Flight Fission of a 345 MeV/Nucleon 238 U Beam

A search for new neutron-rich isotopes beyond $Z=28$ and $N=50$ was performed using a 345 MeV/nucleon $^{238}$U beam at RI Beam Factory in RIKEN Nishina Center. The BigRIPS separator and state-of-the-art radiation detectors were used to efficiently separate and identify the produced nuclei. For the first time, we have observed and determined the production cross sections for eight neutron-rich isotopes $^{72}$Cr, $^{74,75}$Mn, $^{77}$Fe, $^{79,80}$Co, $^{85}$Cu, and $^{90}$Ga. This study broadens our understanding of nuclear existence and paves the way for investigating the properties of neutron-rich medium-mass nuclei.

Shimizu, Yohei [RIKEN, Saitama (Japan); et al.]↗
DOE OSTI2023

The role of CenKR in the coordination of Rhodobacter sphaeroides cell elongation and division

ABSTRACT Cell elongation and division are essential aspects of the bacterial life cycle that must be coordinated for viability and replication. The impact of misregulation of these processes is not well understood as these systems are often not amenable to traditional genetic manipulation. Recently, we reported on the CenKR two-component system (TCS) in the Gram-negative bacterium Rhodobacter sphaeroides that is genetically tractable, widely conserved in α-proteobacteria, and directly regulates the expression of components crucial for cell elongation and division, including genes encoding subunit of the Tol-Pal complex. In this work, we show that overexpression of cenK results in cell filamentation and chaining. Using cryo-electron microscopy (cryo-EM) and cryo-electron tomography (cryo-ET), we generated high-resolution two-dimensional (2D) images and three-dimensional (3D) volumes of the cell envelope and division septum of wild-type cells and a cenK overexpression strain finding that these morphological changes stem from defects in outer membrane (OM) and peptidoglycan (PG) constriction. By monitoring the localization of Pal, PG biosynthesis, and the bacterial cytoskeletal proteins MreB and FtsZ, we developed a model for how increased CenKR activity leads to changes in cell elongation and division. This model predicts that increased CenKR activity decreases the mobility of Pal, delaying OM constriction, and ultimately disrupting the midcell positioning of MreB and FtsZ and interfering with the spatial regulation of PG synthesis and remodeling. IMPORTANCE By coordinating cell elongation and division, bacteria maintain their shape, support critical envelope functions, and orchestrate division. Regulatory and assembly systems have been implicated in these processes in some well-studied Gram-negative bacteria. However, we lack information on these processes and their conservation across the bacterial phylogeny. In R. sphaeroides and other α-proteobacteria, CenKR is an essential two-component system (TCS) that regulates the expression of genes known or predicted to function in cell envelope biosynthesis, elongation, and/or division. Here, we leverage unique features of CenKR to understand how increasing its activity impacts cell elongation/division and use antibiotics to identify how modulating the activity of this TCS leads to changes in cell morphology. Our results provide new insight into how CenKR activity controls the structure and function of the bacterial envelope, the localization of cell elongation and division machinery, and cellular processes in organisms with importance in health, host-microbe interactions, and biotechnology.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

X-ray thermal diffuse scattering as a texture-robust temperature diagnostic for dynamically compressed solids

We present a model of x-ray thermal diffuse scattering (TDS) from a cubic polycrystal with an arbitrary crystallographic texture, based on the classic approach of Warren [B. E. Warren, Acta Crystallogr. 6, 803 (1953)]. We compare the predictions of our model with femtosecond x-ray diffraction patterns gathered from ambient and dynamically compressed rolled copper foils obtained at the High Energy Density instrument of the European X-Ray Free-Electron Laser facility and find that the texture-aware TDS model yields more accurate results than does the conventional powder model owed to Warren. Nevertheless, we further show: with sufficient angular detector coverage, the TDS signal is largely unchanged by sample orientation and in all cases strongly resembles the signal from a perfectly random powder; shot-to-shot fluctuations in the TDS signal resulting from grain-sampling statistics are at the percent level, in stark contrast to the fluctuations in the Bragg-peak intensities (which are over an order of magnitude greater); and TDS is largely unchanged even following texture evolution caused by compression-induced plastic deformation. We conclude that TDS is robust against texture variation, making it a flexible temperature diagnostic applicable just as well to off-the-shelf commercial foils as to ideal powders.

Crystal lattices↗
DOE OSTI2025

Soft-hard framework with exact four-momentum conservation for small systems

A new framework, called x-scape, for the combined study of both hard and soft transverse momentum sectors in high-energy proton-proton (𝑝−𝑝) and proton-nucleus (𝑝−𝐴) collisions is set up. A dynamical initial state is set up using the 3d-Glauber model with transverse locations of hotspots within each incoming nucleon. A hard scattering that emanates from two colliding hotspots is carried out using the Pythia generator. Initial state radiation from the incoming hard partons is carried out in a new module called I-matter, which includes the longitudinal location of initial splits. The energy-momentum of both the initial hard partons and their associated beam remnants is removed from the hot spots, depleting the energy-momentum available for the formation of the bulk medium. Outgoing showers are simulated using the matter generator, and results are presented for both cases, allowing for and not allowing for energy loss. First comparisons between this hard-soft model and single inclusive hadron and jet data from 𝑝−𝑝 and minimum bias 𝑝−Pb collisions are presented. Single hadron spectra in 𝑝−𝑝 are used to carry out a limited (in number of parameters) Bayesian calibration of the model. Fair comparisons with data are indicative of the utility of this new framework. Theoretical studies of the correlation between jet 𝑝 𝑇 and event activity at mid and forward rapidity are carried out.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Mechanisms in Regulating the Quasi‐Biennial Oscillation in Exascale Earth System Model Version 2

Abstract The update to the deep convection parameterization in the energy exascale Earth system model version 2 (E3SMv2) makes the simulated quasi‐biennial oscillation (QBO) have a shorter period than without the update when other tunable parameters the same since the update makes convection more intense but less frequent while leaving the time‐mean convective heating tendency almost unchanged. Amplitudes of momentum fluxes of parameterized gravity waves (GWs) are intensified since they are determined by the square of convective heating tendency. In addition, stronger planetary waves are simulated in E3SMv2 with the convection scheme update, partially due to the tropospheric precipitation change. Furthermore, there is evidence that planetary waves are intensified in the stratosphere due to the dissipation of enhanced parameterized GWs. These factors are found to be responsible for modulating the QBO simulated in E3SMv2.

Li, Yuanpu [Climate and Global Dynamics Division U↗
NASA NTRS1982

Polar views of the earth's aurora with Dynamics Explorer

Preliminary examination of the first global auroral images gained with the vacuum-ultraviolet imaging photometer on board DE 1 reveals a remarkable spatial configuration of auroral luminosities. Frequently the northern auroral oval is bifurcated by a sun-aligned arc extending from the midday auroral zone to the nighttime sector of the oval. Simultaneous plasma measurements with the low-altitude DE-2 spacecraft are used to show that the character of plasmas above the polar arc is similar to those found over the poleward zones of the auroral oval. The spatial distribution of auroral luminosities is suggestive of a two-cell structure of current systems and convection electric fields over the earth's polar cap and a similar division of the corresponding lobe in the magnetotail.

Frank, L. A.↗
NASA NTRS1990

NASA. Lewis Research Center materials research and technology: An overview

The Materials Division at the Lewis Research Center has a long record of contributions to both materials and process technology as well as to the understanding of key high-temperature phenomena. This paper overviews the division staff, facilities, past history, recent progress, and future interests.

Grisaffe, Salvatore J.↗
NASA NTRS1968

Performance of a 19.7 Meter Diameter Disk-Gap-Band Parachute in a Simulated Martian Environment

Inflation and drag characteristics of a 64.7-foot (19.7-meter) nominal-diameter disk-gap-band parachute deployed at a Mach number of 1.59 and a dynamic pressure of 11.6 psf (555 newtons per m(exp 2)) were obtained from the second balloon-launched flight test of the Planetary Entry Parachute Program. In addition, parachute stability characteristics during the subsonic descent portion of the test are presented. After deployment, the parachute rapidly inflated to a full condition, partially collapsed, and then reinflated to a stable configuration. After reinflation, an average drag coefficient of about 0.55 based on nominal surface area was obtained. The parachute exhibited good stability characteristics during descent. The only major damage to the parachute during the test was the tearing of two canopy panels; a loss of less than 0.5 percent of nominal surface area resulted.

TESTS↗
NASA NTRS2014

Summer 2014 Final Report

Description A report on my term as an intern for the Ground Electrical and Electronics Branch, Electrical Engineering Division, Engineering Directorate at KSC during the summer of 2014.

GODU LH2↗
DOE OSTI2025

Ship‐Based Lidar Evaluation of Southern Ocean Low Clouds in the Storm‐Resolving General Circulation Model ICON and the ERA5 and MERRA‐2 Reanalyses

Global storm resolving models (GSRMs) represent the next generation of global climate models. One of them is a 5-km Icosahedral Nonhydrostatic Weather and Climate Model (ICON). Its high resolution means that parameterizations of convection and clouds, including subgrid-scale clouds, are omitted, relying on explicit simulation but necessarily utilizing microphysics and turbulence parameterizations. Standard-resolution (10–100 km) models, which use convection and cloud parameterizations, have substantial cloud biases over the Southern Ocean (SO), adversely affecting radiation and sea surface temperature. The SO is dominated by low clouds, which cannot be observed accurately from space due to overlapping clouds, attenuation, and ground clutter. We evaluated SO clouds in ICON and the ERA5 and MERRA-2 reanalyzes using approximately 2400 days of lidar observations and 2300 radiosonde profiles from 31 voyages and a Macquarie Island station during 2010–2021, compared to the model and reanalyzes using a ground-based lidar simulator. We found that ICON and the reanalyzes underestimate the total cloud fraction by about 10% and 20%, respectively. ICON and ERA5 overestimate the cloud occurrence peak at about 500 m, associated with underestimated lower tropospheric stability and overestimated lifting condensation level. The reanalyzes strongly underestimate fog and very low-level clouds, and MERRA-2 underestimates cloud occurrence at almost all heights. Outgoing shortwave radiation is overestimated in MERRA-2, implying a “too few, too bright” cloud problem. SO cloud and fog biases are a substantial issue in the analyzed model and reanalyzes and result in shortwave and longwave radiation biases.

Kuma, Peter [Stockholm Univ. (Sweden); Univ. of Ca↗
NASA NTRS1975

Improved thermal storage material for portable life support systems

The availability of thermal storage materials that have heat absorption capabilities substantially greater than water-ice in the same temperature range would permit significant improvements in performance of projected portable thermal storage cooling systems. A method for providing increased heat absorption by the combined use of the heat of solution of certain salts and the heat of fusion of water-ice was investigated. This work has indicated that a 30 percent solution of potassium bifluoride (KHF2) in water can absorb approximately 52 percent more heat than an equal weight of water-ice, and approximately 79 percent more heat than an equal volume of water-ice. The thermal storage material can be regenerated easily by freezing, however, a lower temperature must be used, 261 K as compared to 273 K for water-ice. This work was conducted by the United Aircraft Research Laboratories as part of a program at Hamilton Standard Division of United Aircraft Corporation under contract to NASA Ames Research Center.

Kellner, J. D.↗
NASA NTRS2018

Marrying Social Media Approaches and Space Flight Control: Eight Years at SpaceOps

Three previous SpaceOps papers [1-3] - published in 2010, 2012 (honored by the Conference as a "Best Paper"), and 2014 - have discussed paths to using social media concepts and techniques to enhance space flight controller effectiveness by a) reducing clutter of nonverbal communications (e.g., visual flow with minimal headers and shared content instead of multiple copies), b) moving some voice communication to non-verbal transmission (virtually eliminating "say again" requests because non-verbal comm can be re-read), thus making remaining voice comm easier to focus on, and c) reducing short-term and long-term flight stress on flight control personnel. This paper shows how Marshall Space Flight Center's (MSFC) ISS Payload Operations Integration Center (POIC) is realizing the above goals via the Communications Dashboard (CommDash) software suite deployed in 2017 (including enhancements to the Console Log Tool (CoLT) discussed in earlier papers). Two larger-scope benefits spawned by CommDash evolution are also chronicled: a) emergence of an Agile Software Development (ASD) process adapted to the not-always-nimble environment of government projects, and b) the sprouting of a Human Factors Engineering (HF or HFE) community of practice within MSFC's Payload and Mission Operations Division (PMOD).

Scott, David W.↗
DOE OSTI2026

A solid-state extrusion pathway extensible to upcycling aluminum scrap and end-of-life permanent magnets into ductile Al-6061/SmCo 5 structural magnetic composites

Permanent magnets offer strong potential for multifunctional structural components, but their inherent brittleness limits direct integration. Here, SolidStir® Extrusion (SSE) is used to embed SmCo5 powder into AA6061 in the solid state, and the resulting microstructure, interfacial chemistry, mechanical properties, and magnetic response are systematically characterized. SSE fragments the initial SmCo 5 powder into predominantly fine particles dispersed within an ultrafine Al matrix, with a volume fraction of ∼ 4–6 % in this proof-of-concept study. Interfacial reactions form a continuous Al–Co reaction layer, with local atomic-resolution indexing consistent with Al 13 Co 4 , together with Sm–Si-rich reaction products, while the matrix contains Sm–Co–Si-rich precipitates and Mg 2 Si, producing features from nanometers to micrometers. Compared with an Al extrudate, this architecture increases yield strength by ∼ 42 % and tensile strength by ∼ 31 %, while preserving uniform elongation, and it sustains work hardening in compression from 150 to 400 °C. The composite retained hard-magnetic behavior, with axial magnetization of 12.7 A·m 2 kg −1 at 6 T and intrinsic coercivity of 9.6 kOe. These findings demonstrate that SSE can produce Al-based load-bearing magnetic composites while preserving useful SmCo5 functionality.

36 MATERIALS SCIENCE↗