Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ising”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

A model of the near-earth plasma environment and application to the ISEE-A and -B orbit

A model of the near-earth environment to obtain a best estimate of the average flux of protons and electrons in the energy range from 0.1 to 100 keV for the International Sun-Earth Explorer (ISEE)-A and -B spacecraft. The possible radiation damage to the thermal coating on these spinning spacecraft is also studied. Applications of the model to other high-altitude satellites can be obtained with the appropriate orbit averaging. This study is the first attempt to synthesize an overall quantitative environment of low-energy particles for high altitude spacecraft, using data from in situ measurements.

Chan, K. W.↗

The ISEE-C gamma ray burst spectrometer

The technical properties, operation, and expected sensitivity are discussed for an experiment intended to search for narrow lines in the spectra of gamma ray bursts during the ISEE-C mission. At the heart of the experiment is a radiatively cooled germanium solid state photon detector. The instrumentation is capable of storing the entire spectrum of all but the largest bursts in the energy range 0.05-6.5 MeV. In addition, it analyzes the signals from two CsI detectors in two other experiments on the spacecraft and records event time histories from these to a few millisecond accuracy. A background mode permits spectral analysis during quiet times and will allow the determination of physically interesting upper limits for narrow lines in the diffuse gamma ray background radiation.

Teegarden, B. J.↗

First results from the six-axis electron spectrometer on ISEE-1

A survey, using results from the first 25 orbits of ISEE-1, was made of some aspects of electrons in the dawn magnetosheath. There are indications that the flow of plasma is not uniformly turbulent over this region. The electron heat flux is observed to be directed away from the shock and to have an average value of about twice the interplanetary heat flux. Many magnetopause crossings were observed and usually resemble abrupt transitions from one well-defined plasma state to another. The ejection of plasma from flux tubes convected up against the magnetopause is observed for about half the time, and its thickness and dependance on the solar wind Mach number agrees with theoretical predictions. A full traversal of the whole forward hemisphere of the magnetosheath is required to fully confirm these deductions.

Ogilvie, K. W.↗

ISEE-C solar wind plasma experiment

Two 135 deg spherical section electrostatic analyzers furnish electron and ion measurements of the solar wind on ISEE-C. Each of these instruments utilizes a divided secondary emitter system to intercept the analyzed particles. Secondary electrons selected from all of the emitters simultaneously provide fast two-dimensional measurements of the particle fluxes integrated over polar angle; at a slower rate secondary electrons are successively selected from individual emitters to provide three-dimensional measurements. Speed of the ion measurements is increased by a factor of two by using an active proton peak tracking system to reduce the total range of energy per charge which has to be covered.

Bame, S. J.↗

ISEE-C HKH high energy cosmic rays

The paper describes the ISEE-C multidetector cosmic ray telescope experiment. The HKH particle identifier sensor array is designed to identify the charge and mass of incident cosmic ray nuclei from H-1 to Ni-64 over the energy range of approximately 20 to 500 MeV/nucleon. Particle identification is based on the multiple energy loss technique. The scientific aspects of the experiment are briefly reviewed and consideration is given to the flight hardware, including sensors, event encoding, buffer memory, redundancy and commandability, and packaging.

Greiner, D. E.↗

The ISEE-C plasma wave investigation

The ISEE-C plasma wave investigation is designed to provide comprehensive information on interplanetary wave-particle interactions. Three spectrum analyzers with a total of 19 bandpass channels cover the frequency range 0.3 Hz to 100 kHz. The main analyzer, which uses 16 continuously active amplifiers, gives two complete spectral scans per second in each of 16 filter channels. The instrument sensors include a high-sensitivity magnetic search coil, and electric antennas with effective lengths of 0.6 and 45 m.

Scarf, F. L.↗

The 3-dimensional radio mapping experiment /SBH/ on ISEE-C

The SBH experiment on ISEE-C will provide maps of the large scale structure of the interplanetary magnetic field from ten solar radii altitude to the earth orbit, in and out of the ecliptic. The SBH instrument will track type III solar radio bursts at 24 frequencies in the range 30 kHz-2 MHz thus providing the positions of 24 points along the line of force which guides the electrons producing the radio radiation. The antennas are two dipoles: one (90 m long) in the spin plane, the other (15 m long) along the spin axis. The receiver was designed for high sensitivity (0.3 microV in 3 kHz BW), high intermodulation rejection (80 dB/1 microV input for order 2 products), large dynamic range (70 dB), high selectivity (-30-dB response 6.5 kHz away from the center frequency of 10.7 MHz for the 3 kHz BW channels), and high reliability (expected orbital life: 3 years).

Knoll, R.↗

The medium energy cosmic ray experiment for ISEE-C

A description is provided of the medium energy cosmic ray experiment on board the ISEE-C spacecraft. This experiment is designed to measure the charge composition of nuclear energetic particles over wide ranges in energy (1-500 MeV/nucleon) and in charge (Z equals 1-28). Individual isotopes are resolvable for Z equals 1-7 over a restricted energy range. Electrons of 2-10 MeV are measured as well. These measurements are accomplished using all solid-state detector telescopes with detectors ranging in thickness from 15-3000 microns. The scientific goals of the experiment are also described. These include study of the composition of energetic particles from the sun and from the galaxy, the acceleration and flow of particles in the interplanetary medium, and electrons from Jupiter. Heliospheric gradients and other characteristics of solar modulation will be measured in conjunction with identical telescopes flown on the Voyager 1 and 2 spacecraft and similar telescopes on Pioneer 10 and 11.

Von Rosenvinge, T. T.↗

Quadrispherical LEPEDEAS for ISEE's-1 and -2 plasma measurements

A new generation of spaceflight instrumentation for comprehensive measurements of plasmas within the earth's magnetosphere and its environs is described. These quadrispherical low energy proton and electron differential energy analyzers (LEPEDEAS) for the ISEE's-1 and -2 spacecraft are capable of determining the directional intensities of positive ions and electrons over all but 2 percent of the 4 pi sr solid angle for charged-particle velocity vectors at the spacecraft positions. The energy range of this instrumentation is E/Q of 1 eV to 45 keV with good energy and angular resolutions. An example of inflight observations within the earth's magnetosheath is presented.

Frank, L. A.↗

The electron spectrometer experiment on ISEE-1

A six-axis electron spectrometer for the ISEE-1 spacecraft is described and some typical early results presented. This instrument, designed for three-dimensional plasma distribution function studies in the solar wind, magnetosheath, outer magnetosphere, and near tail regions, has three energy ranges: 7.5-512 eV, 11-2062 eV, and 109-7285 cV, respectively. Two channel electron multipliers are used at the output of each of six cylindrical electrostatic analyzers. The total mass of two sensors and a data processing unit is 4.9 kg and the power comsumption is 3.5 W. Two hundred information bits/s telemetry rate is required.

Ogilvie, K. W.↗

ISEE-C attitude determination using fine sun sensor data only

Techniques developed to determine the spin axis attitude using Fine Sun Sensor (FSS) data only are described. At any given time, the Sun angle specifies the orientation of the spin axis relative to the sunline. The instantaneous time rate of change of the sun angle is directly proportional to the orientation of the spin axis relative to a reference plane that is normal to the ecliptic. Thus, the spin axis attitude can be determined when sufficient data has been collected to accurately measure the rate of change of the sun angle. The uncertainties can be computed directly from the uncertainties in the coefficients of the smoothed sun angle curve. The FSS-only technique is unique in that ephemeris vectors are required only to transform the attitude results to more conventional coordinate frames. The combination of the mission geometry and the FSS accuracy make ISEE-C an ideal mission for applying this method. However, the technique can be used on other missions, such as spin stabilized geosynchronous missions.

Gunshol, L. P.↗

Spacecraft potential control on ISEE-1

Active control of the potential of the ISEE-1 satellite by the use of electron guns is reviewed. The electron guns contain a special cathode capable of emitting an electron current selectable between 10 to the -8th power and 10 to the -3rd power at energies from approximately .6 to 41 eV. Results obtained during flight show that the satellite potential can be stabilized at a value more positive than the normally positive floating potential. The electron guns also reduce the spin modulation of the spacecraft potential which is due to the aspect dependent photoemission of the long booms. Plasma parameters like electron temperature and density can be deduced from the variation of the spacecraft potential as a function of the gun current. The effects of electron beam emission on other experiments are briefly mentioned.

Gonfalone, A.↗

ISEE observations of flux transfer events at the dayside magnetopause

Magnetic field measurements from the ISEE 1 and 2 spacecraft are examined in the vicinity of the magnetopause near local noon on a typical pass when the magnetosheath field is southward. The data clearly show evidence for patchy impulsive reconnection. The flux transfer rate for these events is at least of the order of 1-2 times 10 to the 12th Maxwells per second, and possibly greater. This rate is similar to rates deduced for magnetopause erosion events. Not only are these observations relevant to the substorm process, but the impulsive nature of the flux transfer events leads to boundary oscillations that could also be the source of long period magnetic pulsations in the outer magnetosphere.

Russell, C. T.↗

Initial ISEE magnetometer results - Magnetopause observations

Magnetic-field profiles across the magnetopause are examined which were obtained by the ISEE 1 and 2 spacecraft on four passes when the spacecraft separation was only a few hundred kilometers. The velocity of the magnetopause is found to be highly irregular, ranging from 4 to over 40 km/s and varying on a shorter time scale than required for a spacecraft to cross the boundary. The thickness of the magnetopause is estimated to range from 500 to over 1000 km. Clear evidence for field-line reconnection is discerned in data obtained when the magnetosheath field was southward. This evidence consists of flux-transfer events in which reconnection begins and ends on a time scale of minutes or less, leading to oscillations in the position of the magnetopause.

Russell, C. T.↗

ISEE plasma observations near the subsolar magnetopause

High-resolution plasma observations are analyzed which were performed during four successive inbound passes of the ISEE 1 and 2 spacecraft. A total of nine magnetopause crossings were made near the subsolar point under widely differing orientations of the interplanetary magnetic field. It is found that (1) large fluctuations that often appear to be temporal in nature characterize the magnetosheath flow near the magnetopause; (2) the plasma density and pressure between about 0.1 and 0.3 earth radius outside the magnetopause often begin to decrease gradually as the magnetopause is approached, in conjunction with an increase in magnetic-field strength; (3) the magnetopause, in cases where it can be well resolved, exhibits fluctuations in density, pressure, and bulk velocity about average magnetosheath values; and (5) the only thick (low-latitude) boundary layer observed was characterized by sharp changes at its inner and outer edges.

Paschmann, G.↗

Early results from ISEE-1 electric field measurements

Typical ISEE 1 electric-field measurements with double-probe floating-potential instruments are illustrated in raw-data form. Attention is given to coordinates, solar-wind measurements, bow-shock fields, magnetosheath fields, and midnight near-tail fields. The existence of field phenomena occurring over dimensions comparable to the probe separation and no greater than the 'characteristic' electron cyclotron radius is suggested.

Heppner, J. P.↗

Initial ISEE magnetometer results - Shock observation

A selection of early measurements is used to illustrate the three advantages brought by ISEE to the study of natural collisionless shocks. These advantages are the ability to resolve most space/time ambiguity by means of simultaneous two-point measurements, instrumentation to make comprehensive field and particle observations covering all important quantities, and the capacity to record data at high time resolution. Magnetic-field records from shocks of various types are presented; the types of shock include laminar, supercritical, quasi-perpendicular, high-beta, and quasi-parallel. The spacing of the two spacecraft and the resolution of the system are employed to develop numerous kinematic descriptions of the shocks and the waves that compose and surround them. Data from a single particle experiment are correlated with field data for three cases to demonstrate the important role of comprehensive instrumentation.

Russell, C. T.↗