Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Impurities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Impurity screening behavior of the high-field side scrape-off layer in near-double-null configurations: prospect for mitigating plasma-material interactions on RF actuators and first-wall components

The impurity screening response of the high-field side (HFS) scrape-off layer (SOL) to localized nitrogen injection is investigated on Alcator C-Mod for magnetic equilibria spanning lower-single null, double-null and upper single null configurations under otherwise identical plasma conditions. L-mode, EDA H-mode and I-mode discharges are investigated. HFS impurity screening is found to depend on magnetic flux balance and the direction of B×?B relative to the most active divertor. Impurity ‘plume’ emission patterns indicate that both parallel and perpendicular (E×B) flows in the SOL contribute to the ‘flushing’ of impurities towards the active divertor, thereby affecting the overall impurity screening behavior. Despite the fact that the HFS scrape-off layer is extremely narrow in near-double-null configurations, this SOL is able to screen locally injected nitrogen at least as effectively as the low-field side (LFS) SOL – up to a factor of 10 more effective, depending on specific plasma conditions and whether the magnetic geometry produces parallel flows that work with or against E×B flows. For situations in which the E×B drift of the impurity ions opposes parallel flow toward the primary divertor, HFS impurity screening is found to be least effective. When E×B drifts assist parallel flow toward the primary divertor, HFS impurity screening is found to be very effective. These data support the idea of placing RF actuators and close-fitting wall components on the high-field side of the tokamak. With this configuration, near-double-null magnetic topologies may be used for active control of plasma parameters at the antenna/plasma interface for optimal RF coupling, mitigate the generation of local impurities from plasma-material interactions and, taking advantage of favorable plasma flows and good screening properties of the HFS SOL, further minimize the impact of wall-born impurity sources on the plasma core.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Integrated modelling: Coupling of surface evolution and plasma-impurity transport

During the interaction of the scrape off layer (SOL) plasma with the first wall the evolution of both wall and plasma are tightly coupled: The erosion of the first wall leads to an impurity concentration in the plasma which affects the particle and power balance in the plasma. In turn the impurities, when leaving the plasma via transport, can form deposits and mixed materials, far away from their initial source location. These deposits can be eroded, allowing the impurities to stepwise migrate through the fusion device until they end up at a location where the plasma at the wall is cold enough and no further erosion occurs. To describe these processes an integrated model of surface evolution and plasma transport of impurities is needed. The WallDYN code achieves this required coupling of processes by parameterising the output of surface evolution- and plasma impurity-migration-codes by analytical models. For a given fixed background plasma it evolves the surface composition, derives impurity flux into and from the plasma and can from this derive the impurity densities in the plasma. This paper will show the importance of including this recycling of impurities at the wall in impurity migration modelling: The 13 CH 4 seeding experiment performed in the Wendelstein 7-X Stellerator is modelled using the recent extension of the WallDYN code to 3D plasma and wall geometries. A comparison with post mortem analysis of the 13 C deposition shows both qualitative and quantitative agreement with the WallDYN calculations.

36 MATERIALS SCIENCE↗

Characterization and validation of an in silico toxicology model to predict the mutagenic potential of drug impurities*

Control and minimization of human exposure to potential genotoxic impurities found in drug substances and products is an important part of preclinical safety assessments of new drug products. The FDA's 2008 draft guidance on genotoxic and carcinogenic impurities in drug substances and products allows use of computational quantitative structure–activity relationships (QSAR) to identify structural alerts for known and expected impurities present at levels below qualified thresholds. This study provides the information necessary to establish the practical use of a new in silico toxicology model for predicting Salmonella t. mutagenicity (Ames assay outcome) of drug impurities and other chemicals. We describe the model's chemical content and toxicity fingerprint in terms of compound space, molecular and structural toxicophores, and have rigorously tested its predictive power using both cross-validation and external validation experiments, as well as case studies. Consistent with desired regulatory use, the model performs with high sensitivity (81%) and high negative predictivity (81%) based on external validation with 2368 compounds foreign to the model and having known mutagenicity. A database of drug impurities was created from proprietary FDA submissions and the public literature which found significant overlap between the structural features of drug impurities and training set chemicals in the QSAR model. Overall, the model's predictive performance was found to be acceptable for screening drug impurities for Salmonella mutagenicity. -- Highlights: ► We characterize a new in silico model to predict mutagenicity of drug impurities. ► The model predicts Salmonella mutagenicity and will be useful for safety assessment. ► We examine toxicity fingerprints and toxicophores of this Ames assay model. ► We compare these attributes to those found in drug impurities known to FDA/CDER. ► We validate the model and find it has a desired predictive performance.

60 APPLIED LIFE SCIENCES↗

Theoretical Study of Radiation from a Broad Range of Impurity Ions for Magnetic Fusion Diagnostics

Spectroscopy of radiation emitted by impurities plays an important role in the study of magnetically confined fusion plasmas. The measurements of these impurities are crucial for the control of the general machine conditions, for the monitoring of the impurity levels, and for the detection of various possible fault conditions. Low-Z impurities, typically present in concentrations of 1%, are lithium, beryllium, boron, carbon, and oxygen. Some of the common medium-Z impurities are metals such as iron, nickel, and copper, and high-Z impurities, such as tungsten, are present in smaller concentrations of 0.1% or less. Despite the relatively small concentration numbers, the aforementioned impurities might make a substantial contribution to radiated power, and also influence both plasma conditions and instruments. A detailed theoretical study of line radiation from impurities that covers a very broad spectral range from less than 1 Å to more than 1000 Å has been accomplished and the results were applied to the LLNL Electron Beam Ion Trap (EBIT) and the Sustained Spheromak Physics Experiment (SSPX) and to the National Spherical Torus Experiment (NSTX) at Princeton. Though low- and medium-Z impurities were also studied, the main emphasis was made on the comprehensive theoretical study of radiation from tungsten using different state-of-the-art atomic structure codes such as Relativistic Many-Body Perturbation Theory (RMBPT). The important component of this research was a comparison of the results from the RMBPT code with other codes such as the Multiconfigurational Hartree–Fock developed by Cowan (COWAN code) and the Multiconfiguration Relativistic Hebrew University Lawrence Atomic Code (HULLAC code), and estimation of accuracy of calculations. We also have studied dielectronic recombination, an important recombination process for fusion plasma, for variety of highly and low charged tungsten ions using COWAN and HULLAC codes. Accurate DR rate coefficients are needed for describing the ionization balance of plasmas, which in turn determines the lines contributing to the spectral emission and the radiative power loss. In particular, we have calculated relativistic atomic data and corresponding dielectronic satellite spectra of highly ionized W ions, such as, for example, Li-like W (with the shortest wavelength of x-ray radiation of about 0.2 Å) that might exist in ITER core plasmas at very high temperatures of 30-40 keV. In addition, we have completed relativistic calculations of low ionized W ions from Lu-like (W3+) to Er-like (W6+) and for Sm-like(W12+) and Pm-like (W13+) that cover a spectral range from few hundred to thousand Å and are more relevant to the edge plasma diagnostics in tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neoclassical transport of impurities in tokamaks with non-axisymmetric perturbations

The effect of resonant magnetic perturbations (RMPs) on neoclassical transport of impurities is calculated in DIII-D and NSTX. Here, the neoclassical fluxes are evaluated using the NEO code with nonlinear one-fluid nonaxisymmetric equilibrium calculated using M3D-C1. Neoclassical fluxes of impurities show significant changes with RMPs if the impurity resides in low-collisionality regime, but are weakly affected by RMPs in the Pfirsch–Schlüter (P–S) regime. Charge number (Z) of the impurity affects the collisionality of impurity species, which then determines the effect of 3D fields on neoclassical impurity transport. This suggests that RMPs can be possibly used for exhaust of low-Z impurities in these facilities, but have little effect for impurities with charge number greater than 10 or so. Additionally, it is shown that it is the change in the convective fluxes which is a main contributor in modifying the neoclassical impurity fluxes in the presence of RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suppression of Superfluid Density and the Pseudogap State in the Cuprates by Impurities

Here, we use scanning tunneling microscopy (STM) to study magnetic Fe impurities intentionally doped into the high-temperature superconductor Bi 2 Sr 2 CaCu 2 O 8+δ . Our spectroscopic measurements reveal that Fe impurities introduce low-lying resonances in the density of states at Ω 1 ≈ 4 meV and Ω 2 ≈ 15 meV , allowing us to determine that, despite having a large magnetic moment, potential scattering of quasiparticles by Fe impurities dominates magnetic scattering. In addition, using high-resolution spatial characterizations of the local density of states near and away from Fe impurities, we detail the spatial extent of impurity-affected regions as well as provide a local view of impurity-induced effects on the superconducting and pseudogap states. Lastly, our studies of Fe impurities, when combined with a reinterpretation of earlier STM work in the context of a two-gap scenario, allow us to present a unified view of the atomic-scale effects of elemental impurities on the pseudogap and superconducting states in hole-doped cuprates; this may help resolve a previously assumed dichotomy between the effects of magnetic and nonmagnetic impurities in these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental study of impurity screening in the edge ergodic layer of the Large Helical Device using carbon emissions of CIII to CVI

Four resonance transitions of CIII (977.03 A:2s{sup 2} {sup 1}S{sub 0}-2s2p {sup 1}P{sub 1}), CIV (1550 A:2s {sup 2}S-2p {sup 2}P), CV (40.27 A:1s{sup 2} {sup 1}S{sub 0}-1s2p {sup 1}P{sub 1}), and CVI (33.73 A:1s {sup 2}S-2p {sup 2}P) have been observed in vacuum ultraviolet and extreme ultraviolet regions to study the edge carbon impurity transport in the Large Helical Device ergodic layer. Here, CIII and CIV indicate the carbon influx at the outside boundary of the ergodic layer and CV and CVI indicate the ions in higher ionization stages, which have already experienced the transport in the ergodic layer. The intensity ratio of CV+CVI to CIII+CIV, therefore, represents the degree of impurity screening, which has been analyzed with different edge plasma parameters and ergodic magnetic field structures. The ratio decreases by two orders of magnitude with an increase in electron density n{sub e} in the range of 1-8x10{sup 19} m{sup -3}. The CV and CVI emissions tend to decrease with n{sub e}, whereas the CIII and CIV emissions monotonically increase with n{sub e}. The result suggests an enhancement of the impurity screening in the higher n{sub e} range due to the increasing ion-impurity collision frequency ({nu}{sub {zeta}}{sub i}{identical_to}1/{tau}{sub s}=3.4x10{sup 4} s{sup -1} at n{sub e}=2x10{sup 19} m{sup -3} and 1.0x10{sup 5} s{sup -1} at 6x10{sup 19} m{sup -3} for CV). The friction force parallel to the magnetic fields plays an important role in the edge impurity transport within the ergodic layer. When the ergodic layer structure is thicker, the ratio systematically decreases mainly due to a reduction in CV+CVI emissions. The ratio is also studied by changing the radial position of an externally supplied m/n=1/1 island. When the island is positioned in the ergodic layer, the ratio indicates a remarkable change, i.e., reduction in CV+CVI and increase in CIII+CIV. These experiments demonstrate that the modification of the ergodic magnetic field structure makes a clear change to the edge impurity transport. When the background ion species is changed from hydrogen to helium, the ratio is clearly reduced, at least at n{sub e}{<=}4x10{sup 19} m{sup -3}, suggesting the enhancement of the impurity screening effect due to the increased collisionality. Finally, the experimental result is simulated using three-dimensional edge transport code of EMC3-EIRENE. The density dependence of the carbon ratio can be well reproduced with a simulation code suggesting that impurity screening is induced in the ergodic magnetic field layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impurity transport in trapped electron mode driven turbulence

Trapped electron mode turbulence is studied by gyrokinetic simulations with the GYRO code and an analytical model including the effect of a poloidally varying electrostatic potential. Its impact on radial transport of high-Z trace impurities close to the core is thoroughly investigated, and the dependence of the zero-flux impurity density gradient (peaking factor) on local plasma parameters is presented. Parameters such as ion-to-electron temperature ratio, electron temperature gradient, and main species density gradient mainly affect the impurity peaking through their impact on mode characteristics. The poloidal asymmetry, the safety factor, and magnetic shear have the strongest effect on impurity peaking, and it is shown that under certain scenarios where trapped electron modes are dominant, core accumulation of high-Z impurities can be avoided. We demonstrate that accounting for the momentum conservation property of the impurity-impurity collision operator can be important for an accurate evaluation of the impurity peaking factor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parallel transport studies of high-Z impurities in the core of Alcator C-Mod plasmas

Measurements of poloidal variation, ñ{sub z}/ , in high-Z impurity density have been made using photodiode arrays sensitive to vacuum ultraviolet and soft x-ray emission in Alcator C-Mod plasmas. In/out asymmetries in the range of −0.2 <0.3 are observed for r/a<0.8, and accumulation on both the high-field side, n{sub z,cos}<0, and low-field side, n{sub z,cos}>0, of a flux surface is found to be well described by a combination of centrifugal, poloidal electric field, and ion-impurity friction effects. Up/down asymmetries, −0.05 <0.10, are observed over 0.5 0 corresponding to accumulation opposite the ion ∇B drift direction. Measurements of the up/down asymmetry of molybdenum are found to disagree with predictions from recent neoclassical theory in the trace limit, n{sub z}Z{sup 2}/n{sub i}≪1. Non-trace levels of impurities are expected to modify the main-ion poloidal flow and thus change friction-driven impurity density asymmetries and impurity poloidal rotation, v{sub θ,z}. Artificially modifying main-ion flow in parallel transport simulations is shown to impact both ñ{sub z}/ and v{sub θ,z}, but simultaneous agreement between measured and predicted up/down and in/out asymmetry as well as impurity poloidal rotation is not possible for these C-Mod data. This link between poloidal flow and poloidal impurity density variation outlines a more stringent test for parallel neoclassical transport theory than has previously been performed. Measurement and computational techniques specific to the study of poloidal impurity asymmetry physics are discussed as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coupling of ion temperature gradient and trapped electron modes in the presence of impurities in tokamak plasmas

The coupling of ion temperature gradient (ITG or η{sub i}) mode and trapped electron mode (TEM) in the presence of impurity ions is numerically investigated in toroidal collisionless plasmas, using the gyrokinetic integral eigenmode equation. A framework for excitations of the ITG modes and TEMs with respect to their driving sources is formulated first, and then the roles of impurity ions played in are analyzed comprehensively. In particular, the characteristics of the ITG and TEM instabilities in the presence of impurity ions are emphasized for both strong and weak coupling (hybrid and coexistent) cases. It is found that the impurity ions with inwardly (outwardly) peaked density profiles have stabilizing (destabilizing) effects on the hybrid (namely the TE-ITG) modes in consistence with previous works. A new finding of this work is that the impurity ions have stabilizing effects on TEMs in small η{sub i} (η{sub i}≤1) regime regardless of peaking directions of their density profiles whereas the impurity ions with density gradient L{sub ez}=L{sub ne}/L{sub nz}>1 (L{sub ez}<1) destabilize (stabilize) the TEMs in large η{sub i} (η{sub i}≥1) regime. In addition, the dependences of the growth rate, real frequency, eigenmode structure, and wave spectrum on charge concentration, charge number, and mass of impurity ions are analyzed in detail. The necessity for taking impurity ion effects on the features of turbulence into account in future transport experimental data analyses is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impurity effects on short wavelength ion temperature gradient mode in elongated tokamak plasmas

The effects of impurity ions on the short wavelength ion temperature gradient (SWITG) driven instability in elongated tokamak plasmas are numerically investigated with the gyrokinetic integral eigenmode equation. It is found that for a moderate electron density gradient, the SWITG mode is first destabilized and then stabilized with increasing elongation κ, which is different from the conventional long wavelength ITG mode. For a large electron density gradient, the elongation can effectively stabilize the SWITG mode. Moreover, the low Z impurity ions with inwardly (outwardly) peaked density profiles have stabilizing (destabilizing) effects on the SWITG modes in elongated plasmas. Interestingly, the high Z tungsten impurity ions with inwardly peaked density profiles play a stronger stabilizing role in the SWITG modes than the low Z impurity ions (such as carbon and oxygen) do. In particular, the high Z tungsten impurity ions with a weakly outwardly peaked density profile still have a stabilizing effect. Finally, the critical threshold of impurity density gradient scale length for exciting impurity mode is also numerically obtained, indicating that the impurity mode is harder to be excited in elongated plasmas than in circular ones.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved core-edge compatibility using impurity seeding in the small angle slot (SAS) divertor at DIII-D

Impurity seeding studies in the slot divertor (SAS) at DIII-D have revealed a strong relationship between the detachment onset and pedestal characteristics with both target geometry and impurity species. N 2 seeding in the slot has led to the first simultaneous observation of detachment on the entire suite of boundary diagnostics viewing the SAS without degradation of core confinement. SOLPS-ITER simulations with D+C+N, full cross-field drifts and n-n collisions activated are performed for the first time in DIII-D to interpret the behavior. This illustrates a strong effect of divertor configuration and plasma drifts on the recycling source distribution with significant consequences on plasma flows. Flow reversal is found for both main ions and impurities affecting strongly the impurity transport and providing an explanation for the observed dependence on strike point location of the detachment onset and impurity leakage found in the experiments. Matched discharges with either nitrogen or neon injection show that while nitrogen does not significantly affect the pedestal, neon leads to increased pedestal pressure gradient and improved pedestal stability. Little nitrogen penetrates in the core, but a great amount of neon is found in the pedestal consistent with the different ionization potentials of the two impurities. This research demonstrates that neutral and impurity distributions in the divertor can be controlled through variations in strike point locations in a fixed baffle structure. Divertor geometry combined with impurity seeding enables mitigated divertor heat flux balancing core contamination and thus leading to enhanced divertor dissipation and improved core-edge compatibility which are essential for ITER and for future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Induced interaction and crystallization of self-localized impurity fields in a Bose-Einstein condensate

We model the behavior of N classical impurity fields immersed in a larger Bose-Einstein condensate by N+1 coupled nonlinear Schroedinger equations in one, two, and three space dimensions. We discuss the stability of the uniform miscible system and show the importance of surface tension for self-localization of the impurity fields. We derive analytically the attractive tail of the impurity-impurity interaction due to mediation by the underlying condensate. Assuming all impurity fields interact with the same strength, we explore numerically the resulting phase diagram, which contains four phases: (I) all fields are miscible; (II) the impurity fields are miscible with each other but phase separate from the condensate as a single bubble; (III) the localized impurity fields stay miscible with the condensate, but not with each other; and (IV) the impurity fields phase separate from the condensate and each other, forming a crystalline structure within a bubble. Thus, we show that a crystal can be constructed solely from superfluid components. Finally, we argue that the crystalline phases maintain their superfluid behavior, i.e., they possess a nonclassical rotational inertia, which - combined with lattice order - is a characteristic of supersolidity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impurity transport through a strongly interacting bosonic quantum gas

Using near-exact numerical simulations, we study the propagation of an impurity through a one-dimensional Bose lattice gas for varying bosonic interaction strengths and filling factors at zero temperature. The impurity is coupled to the Bose gas and confined to a separate tilted lattice. The precise nature of the transport of the impurity is specific to the excitation spectrum of the Bose gas, which allows one to measure properties of the Bose gas nondestructively, in principle, by observing the impurity; here we focus on the spatial and momentum distributions of the impurity as well as its reduced density matrix. For instance, we show it is possible to determine whether the Bose gas is commensurately filled as well as the bandwidth and gap in its excitation spectrum. Moreover, we show that the impurity acts as a witness to the crossover of its environment from the weakly to the strongly interacting regime, i.e., from a superfluid to a Mott insulator or Tonks-Girardeau lattice gas, and the effects on the impurity in both of these strongly interacting regimes are clearly distinguishable. Finally, we find that the spatial coherence of the impurity is related to its propagation through the Bose gas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mixed conduction in doped semiconductor structures related to quasi-metallic conduction in the impurity band

Mixed conduction due to simultaneous contributions from allowed states in the valence band and extended impurity (acceptor) states, which occur in the impurity band at high impurity concentrations because of the Anderson transition, is observed in a series of GaAs/AlGaAs structures. Mixed conduction manifests itself in the existence of a minimum in the temperature dependence of the carrier concentration and a noticeable bend in the temperature dependences of the conductivity. Expressions for the mixed conductivity on which the calculations are based were derived taking into account the spectrum of impurity states in the quantum wells (the upper and lower Hubbard impurity bands), their occupancies, and the sign of charge carriers in the valence and the impurity bands; the important assumption was made that the width of impurity bands is much smaller than the spacing from the valence band. The calculation results agree well with the experiment and were used to determine the binding energies for the upper and lower Hubbard bands, the acceptor concentration, and the degree of compensation. It is shown that formulas commonly used for the calculation of mixed conductivity need significant corrections in the case of narrow impurity bands.

36 MATERIALS SCIENCE↗

A Review of Recent Impurity Measurements of LANL Material

The Applied Computational Engineering and Statistics (ACES) group of the Savannah River National Laboratory (SRNL) was asked to review recent measurements performed by the Los Alamos National Laboratory (LANL) on material from that facility that is being considered for processing through the Mixed Oxide (MOX) Fuel Fabrication Facility (MFFF) at the Savannah River Site (SRS). There are specification limits for impurities in the feed to the MOX facility: a maximum limit and an exceptional limit. The limits for an impurity apply to the population of concentration values for that impurity for a class of material that is to be processed through MOX. For the purposes of this report, these limits were defined as follows. The concentration of an elemental impurity, expressed as micrograms of the element per gram of plutonium (µg/g Pu), is to be no more than the maximum limit for that element for 98% of the material coming through MOX; that is, 98% of the material processed at MOX is to have a concentration of the given element less than the maximum limit. In addition, the concentration for a given element is to be no more than the exceptional limit for that element for 99.9% of the material processed through MOX. The measurements evaluated as part of this study included LANL blend lots 1 through 29 and cover carbon (C), chlorine (Cl), fluorine (F), nitrogen (N), phosphorous (P), and sulfur (S). Note that all of the measurements for each impurity were below their respective maximum (and obviously, therefore, their exceptional) limits. Thus, there is no immediate concern regarding the LANL material being suitable for processing through MOX. Two approaches were used to investigate the quantiles of the impurity populations. The first approach used was a nonparametric approach. While the results from this approach did not indicate any problems for any of the impurities, there was too little data available to lead to confident statements about satisfying the maximum and exceptional limits. Impurity data from additional random samples of the LANL material would be needed to increase the confidence level associated with the results from a nonparametric approach for investigating the population quantiles of interest. For S, F, and Cl, only a nonparametric approach was used. A second approach, a parametric approach, was attempted for C, P, and N. However, the results for the P and N measurements indicated that each of their respective populations was not well modeled by a normal or by a lognormal distribution. Thus, the conclusions for the P and N populations were those provided by the nonparametric approach. From the parametric approach, the results for C indicated no issue in the LANL material meeting the maximum limit for this element assuming that the measurements for this element follow a lognormal distribution.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Computationally Guided Design of Multiple Impurities Tolerant Cathode for Solid Oxide Fuel Cell Applications

Solid oxide fuel cells (SOFCs) have been recognized as promising candidates in the demand of reducing the dependence on fossil fuels, which is one of the solutions to the threat of global warming. It was reported that the direct chemical-to-electrical energy conversion in SOFCs comes with negligible emission of greenhouse gases and up to 60% working efficiency. SOFC has unique advantages over traditional power generation technologies and other types of fuel cells due to the use of relatively inexpensive materials, low sensitivity to poisoning impurities in fuels, relatively high conversion efficiency, and fuel flexibility (like carbon-based fuels). However, during the SOFC operation, the cathode is exposed to intrinsic and extrinsic airborne contaminants at high temperatures (600–900°C), leading to their reaction with electrode materials, irreversible chemical and structural changes, and electrochemical performance degradation. of which CO2, SO2, Cr6+ and H2O are known to be concerns. Thus, developing a comprehensive understanding of the multiple impurities poisoning of SOFC cathodes in the presence of single or multiple impurities is necessary to address the long-term degradation of the SOFC cathode systems at operating conditions. An integrated computational and experimental approach has been utilized in the current work aiming at the comprehensive investigation of the cathode materials under single or multiple impurities poisoning effects, understanding the multiple impurities poisoning mechanism(s), and improving the long-term durability of the SOFC cathodes to develop better performing impurity-tolerant cathode materials. We first examined the agreement between the simulation approach and the experimental observations at various atmospheric and temperature conditions to confirm the reliability of CALPHAD for poisoning simulations in these cathodes. Then, using this approach, we investigated the accelerated testing protocol, which has become the standard method for conducting impurity poisoning experiments involving these cathode materials. We found our simulation approach is able to predict in which systems, i.e., cathode material and treatment environment, the accelerated testing protocols reflect actual operating conditions. Finally, in-depth simulations were done for these three candidate cathodes under different experimental conditions and suggested directions toward alternative cathode materials that have superior impurity tolerance.

36 MATERIALS SCIENCE↗

Impurity Levels in Cerium Oxide Microspheres Prepared by Internal Gelation Sol-Gel Methods

Impurity levels were measured in cerium oxide microspheres fabricated by modified internal gelation sol-gel methods. A combination of glow discharge mass spectrometry, electron impact mass spectrometry, combustion gas analysis and instrumental gas analysis were used to assess a wide range of potential elemental impurities. Low concentrations of carbon, nitrogen, and hydrogen impurities in microspheres showed a dependence on how microspheres were washed. Silicon impurities are believed to derive from silicone oil used during sol-gel processing. Spheres washed by the preferred approach had impurity levels below 100 ppm for all elements tested. For applications such as nuclear fuels, sol-gel methods could meet purity specifications as long as metal nitrate feed solutions of sufficient purity are used and microspheres are washed appropriately. In this study, cerium was used as a surrogate for plutonium-238, which is used in radioisotope power systems as a heat source, to determine whether carbon or other impurities were concentrated during internal gelation processing and remained after heat treatments. Analyses indicated low concentrations of impurities in cerium oxide microspheres after sintering steps that were well below documented limits for plutonium-238 oxide fuels. Modified washing methods, combined with a pressurized water treatment, resulted in sintered cerium oxide sol-gel microspheres with low impurity levels.

cerium oxide, sol-gel, internal gelation, microsph↗