Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Column-by-column compositional mapping by Z-contrast imaging

A phenomenological method is developed to determine the composition of materials, with atomic column resolution, by analysis of integrated intensities of aberration-corrected Z-contrast scanning transmission electron microscopy images. The method is exemplified for InAsxP1-x alloys using epitaxial thin films with calibrated compositions as standards. Using this approach we have determined the composition of the two-dimensional wetting layer formed between self-assembled InAs quantum wires on InP (001) substrates. The method utilizes a series of B coefficients that models the background signal in Z-contrast images, which is unaccounted for by image simulations.

36 MATERIALS SCIENCE↗

Trap Passivation in Indium-Based Quantum Dots through Surface Fluorination: Mechanism and Applications

Treatment of InP colloidal quantum dots (QDs) with hydrofluoric acid (HF) has been an effective method to improve their photoluminescence quantum yield (PLQY) without growing a shell. Previous work has shown that this can occur through the dissolution of the fluorinated phosphorus and subsequent passivation of indium on the reconstructed surface by excess ligands. In this article, we demonstrate that very significant luminescence enhancements occur at lower HF exposure though a different mechanism. At lower exposure to HF, the main role of the fluoride ions is to directly passivate the surface indium dangling bonds in the form of atomic ligands. The PLQY enhancement in this case is accompanied by red shifts of the emission and absorption peaks rather than blue shifts caused by etching as seen at higher exposures. Density functional theory shows that the surface fluorination is thermodynamically preferred and that the observed spectral characteristics might be due to greater exciton delocalization over the outermost surface layer of the InP QDs as well as alteration of the optical oscillator strength by the highly electronegative fluoride layer. Passivation of surface indium with fluorides can be applied to other indium-based QDs. PLQY of InAs QDs could also be increased by an order of magnitude via fluorination. We fabricated fluorinated InAs QD-based electrical devices exhibiting improved switching and higher mobility than those of 1,2-ethanedithiol cross-linked QD devices. The effective surface passivation eliminates persistent photoconductivity usually found in InAs QD-based solid films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Next-generation in vivo optical imaging with short-wave infrared quantum dots

For in vivo imaging, the short-wavelength infrared region (SWIR; 1,000–2,000 nm) provides several advantages over the visible and near-infrared regions: general lack of autofluorescence, low light absorption by blood and tissue, and reduced scattering. However, the lack of versatile and functional SWIR emitters has prevented the general adoption of SWIR imaging by the biomedical research community. In this work, we introduce a class of high-quality SWIR-emissive indium-arsenide-based quantum dots that are readily modifiable for various functional imaging applications, and that exhibit narrow and size-tunable emission and a dramatically higher emission quantum yield than previously described SWIR probes. To demonstrate the unprecedented combination of deep penetration, high spatial resolution, multicolour imaging and fast acquisition speed afforded by the SWIR quantum dots, we quantified, in mice, the metabolic turnover rates of lipoproteins in several organs simultaneously and in real time as well as heartbeat and breathing rates in awake and unrestrained animals, and generated detailed three-dimensional quantitative flow maps of the mouse brain vasculature.

47 OTHER INSTRUMENTATION↗

Complex laterally ordered InGaAs and InAs quantum dots by guided self-organized anisotropic strain engineering on shallow- and deep-patterned GaAs (311)B substrates

Self-organized anisotropic strain engineering guided on shallow- and deep-patterned GaAs (311)B substrates is exploited for formation of complex laterally ordered architectures of connected InGaAs quantum dot (QD) arrays and isolated InAs QD groups by molecular beam epitaxy. The combination of strain and step engineerings on shallow stripe-patterned substrates transforms the periodic spotlike arrangement of the InGaAs QD arrays and InAs QD groups (on planar substrates) into a zigzag arrangement of periodic stripes which are well ordered over macroscopic areas on zigzag mesa-patterned substrates. In contrast, the formation of slow-growing facets on deep-patterned substrates produces QD-free mesa sidewalls, while InGaAs QD arrays and InAs QD groups form on the GaAs (311)B top and bottom planes with arrangements modified only close to the sidewalls depending on the sidewall orientation. The QDs on the shallow- and deep-patterned substrates exhibit excellent optical properties up to room temperature. Therefore, the concept of guided self-organization demonstrated on shallow-patterned (due to steps) and deep-patterned (due to facets) substrates is highlighted for creation of complex architectures of laterally ordered QDs for future quantum functional devices.

36 MATERIALS SCIENCE↗

1.58 {mu}m InGaAs quantum well laser on GaAs

We demonstrate the 1.58 {mu}m emission at room temperature from a metamorphic In{sub 0.6}Ga{sub 0.4}As quantum well laser grown on GaAs by molecular beam epitaxy. The large lattice mismatch was accommodated through growth of a linearly graded buffer layer to create a high quality virtual In{sub 0.32}Ga{sub 0.68}As substrate. Careful growth optimization ensured good optical and structural qualities. For a 1250x50 {mu}m{sup 2} broad area laser, a minimum threshold current density of 490 A/cm{sup 2} was achieved under pulsed operation. This result indicates that metamorphic InGaAs quantum wells can be an alternative approach for 1.55 {mu}m GaAs-based lasers.

36 MATERIALS SCIENCE↗

Optical properties of InAs quantum dots grown on patterned Si with a thin GaAs buffer layer

InAs quantum dots (QDs) were grown on patterned Si substrates with a thin GaAs buffer using SiO{sub 2} as a mask by molecular beam epitaxy. GaAs was firstly selectively grown on the exposed Si surface with feature size around 250 nm. The InAs QDs were selectively grown on top of the GaAs. Low temperature photoluminescence (PL) measurements show strong optical activity in the wavelength range from 900 to 1050 nm. The temperature dependent measurement of the PL response indicates that, for temperatures over 110 K, the carrier escape from quantum dots leads to quenching of the signal. The PL results demonstrate that using nanostructures, it is possible to integrate high quality direct gap III-V materials on Si with high optical activity, leading to potentially new optoelectronic applications on Si and other convenient substrates which are lattice mismatched to InAs and other III-V materials.

36 MATERIALS SCIENCE↗

Step bunch assisted two dimensional ordering of In{sub 0.19}Ga{sub 0.81}As/GaAs quantum dots on vicinal GaAs(001) surfaces

We have investigated the self-organized, step bunch assisted formation of In{sub 0.19}Ga{sub 0.81}As/GaAs quantum dots in vertical superlattices consisting of one, four, eight, and ten periods. Samples were grown by molecular beam epitaxy on vicinal 2 deg. A and 2 deg. B GaAs(001) substrates. Those with miscut along the [110] (2 deg. B) exclusively show step bunches of an aspect ratio larger than 10 but without the formation of quantum dots. This highly linear pattern is improved during subsequent periods as proved by high resolution x-ray diffraction and grazing incidence diffraction. On the other hand, a miscut along the [110] (2 deg. A) initially causes a crosslike pattern of step bunches, which finally becomes a two-dimensional arrangement of individual quantum dots.

36 MATERIALS SCIENCE↗

Doping Characterization of InAs/GaAs Quantum Dot Heterostructure by Cross-Sectional Scanning Capacitance Microscopy

In order to better understand dopant incorporation in quantum dot infrared photodetectors, the novel application of cross-sectional scanning capacitance microscopy (SCM) has been used to investigate carrier occupation/distribution in a multi-layer InAs/GaAs quantum dot (QD) heterostructure for different doping techniques. The doping schemes in the QD structure include direct-doping (in InAs QD layers) and remote-doping (in GaAs barrier layers), each with different doping concentrations. The SCM image suggests electrons in direct-doping layers are redistributed due to large band-bending induced by highly-doped, remote-doping layers. The experimental result is supported by a bandstructure calculation using the Schr dinger-Poisson method by Nextnano.

36 MATERIALS SCIENCE↗

Shape-engineered epitaxial InGaAs quantum rods for laser applications

We apply artificial shape engineering of epitaxial semiconductor nanostructures to demonstrate InGaAs quantum rods (QRs), nanocandles, and quantum dots-in-rods on a GaAs substrate. The evolution of the QRs from a zero-dimensional to one-dimensional confinement is evidenced by systematically measuring the photoluminescence and photoluminescence decay as a function of the rod length. Lasers based on a three-stack QR active region are demonstrated at room temperature, validating the applicability of the QRs in the real devices.

36 MATERIALS SCIENCE↗

Further insight into the temperature quenching of photoluminescence from InAs/GaAs self-assembled quantum dots

The possibility of controlling the photoluminescence (PL) intensity and its temperature dependence by means of in-growth and postgrowth technological procedures has been demonstrated for InAs/GaAs self-assembled quantum dots (QDs) embedded in an InGaAs quantum well (QW). The improvement of the QD emission at room temperature (RT), achieved due to a treatment with tetrachloromethane used during the growth, is explained by the reduction of the point defect concentration in the capping layer. It is shown that the PL quenching at RT appears again if the samples are irradiated with protons, above a certain dose. These findings are accounted for by the variations in the quasi-Fermi level position of the minority carriers, which are related to the concentration of trapping centers in the GaAs matrix and have been calculated using a photocarrier statistical model including both radiative and nonradiative recombination channels. By taking into consideration the temperature dependent distribution of the majority and minority carriers between the QDs, embedding QW and GaAs barriers, our calculated results for the PL intensity reproduce very well the experimentally observed trends.

36 MATERIALS SCIENCE↗

Molecular-beam epitaxial growth of III-V semiconductors on Ge/Si for metal-oxide-semiconductor device fabrication

We describe the fabrication of III-V metal-oxide-semiconductor (MOS) devices on Ge/Si virtual substrates using molecular-beam epitaxy. Migration-enhanced epitaxy and low temperature normal GaAs growth produced a sufficiently smooth surface to deposit gate oxides. A 300 nm thick GaAs buffer layer was grown, followed by a 10 nm growth of In{sub 0.2}Ga{sub 0.8}As high mobility channel layer. An 8.5 nm thick Al{sub 2}O{sub 3} layer was deposited ex situ by atomic-layer deposition. Capacitance-voltage (C-V) characteristics show the unpinning of Fermi level. This work suggests this materials combination as a promising candidate for the design of advanced, nonclassical complementary MOS and optoelectronic devices on Si substrates.

36 MATERIALS SCIENCE↗

Leakage mechanisms and potential performance of molecular-beam epitaxially grown GaInAsSb 2.4 {mu}m photodiode detectors

We report on the growth, processing, and characterization of uncoated, unpassivated GaInAsSb detector mesa photodiodes with a cutoff wavelength of 2.4 {mu}m. We find peak room temperature specific detectivity value of 6x10{sup 10} cm Hz{sup 1/2}/W and maximum zero-bias resistivity of 25 {omega} cm{sup 2}. The zero-bias resistivities of mesas with areas ranging from 50{sup 2} {mu}m{sup 2} to 1 mm{sup 2} were found to be limited by generation-recombination currents at mesa sidewalls. At low temperatures, devices were limited by Ohmic leakage, which is likely due to the formation of oxides on the sidewalls. After 6 months of aging, Ohmic leakage becomes the limiting factor at room temperature as well. Based on experimentally obtained material parameters in this and other studies, an upper limit D* and R{sub 0}A were estimated for GaInAsSb materials and compared to those HgCdTe and InGaAs.

36 MATERIALS SCIENCE↗

1.59 {mu}m room temperature emission from metamorphic InAs/InGaAs quantum dots grown on GaAs substrates

We present design, preparation by molecular beam epitaxy, and characterization by photoluminescence of long-wavelength emitting, strain-engineered quantum dot nanostructures grown on GaAs, with InGaAs confining layers and additional InAlAs barriers embedding InAs dots. Quantum dot strain induced by metamorphic lower confining layers is instrumental to redshift the emission, while a-few-nanometer thick InAlAs barriers allow to significantly increase the activation energy of carriers' thermal escape. This approach results in room temperature emission at 1.59 {mu}m and, therefore, is a viable method to achieve efficient emission in the 1.55 {mu}m window and beyond from quantum dots grown on GaAs substrates.

36 MATERIALS SCIENCE↗

Improved resonance characteristics of GaAs beam resonators by epitaxially induced strain

Micromechanical-beam resonators were fabricated using a strained GaAs film grown on relaxed In{sub 0.1}Ga{sub 0.9}As/In{sub 0.1}Al{sub 0.9}As buffer layers. The natural frequency of the fundamental mode was increased 2.5-4 times by applying tensile strain, showing good agreement with the model calculation assuming strain of 0.35% along the beam. In addition, the Q factor of 19 000 was obtained for the best sample, which is one order of magnitude higher than that for the unstrained resonator. This technique can be widely applied for improving the performance of resonator-based micro-/nanoelectromechanical devices.

36 MATERIALS SCIENCE↗

Separation of bulk and surface electron transport in metamorphic InAs layers using quantitative mobility spectrum analysis

Electron transport in low dislocation density, strain-relaxed InAs layers grown on metamorphic InAs{sub y}P{sub 1-y}/InP substrates by molecular beam epitaxy was characterized using quantitative mobility spectrum analysis (QMSA) of Hall effect measurements. QMSA applied to systematically varied metamorphic InAs samples reveals high bulk electron mobilities of {approx}20 000 cm{sup 2}/V s at 300 K at a Si doping concentration of 1x10{sup 17} cm{sup -3}, simultaneously with a separate population of much slower electrons having an average mobility of {approx}2400 cm{sup 2}/V s due to parallel conduction within the InAs surface electron accumulation layer. Measurements made on higher doped samples reveal only a single electron population participating in transport due to lowered surface band bending that reduces surface accumulation of electrons in conjunction with the high conductivity of the high mobility metamorphic InAs bulk that overwhelms any remaining surface conductivity in the Hall effect measurements.

36 MATERIALS SCIENCE↗

Real time analysis of self-assembled InAs/GaAs quantum dot growth by probing reflection high-energy electron diffraction chevron image

Self-assembling process of InAs/GaAs quantum dots has been investigated by analyzing reflection high-energy electron diffraction chevron images reflecting the crystal facet structure surrounding the island. The chevron image shows dramatic changes during the island formation. From the temporal evolution of the chevron tail structure, the self-assembling process has been found to consist of four steps. The initial islands do not show distinct facet structures. Then, the island surface is covered by high-index facets, and this is followed by the formation of stable low-index facets. Finally, the flow of In atoms from the islands occurs, which contributes to flatten the wetting layer. Furthermore, we have investigated the island shape evolution during the GaAs capping layer growth by using the same real-time analysis technique.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth of InAsN:Sb for midinfrared Optoelectronics

We report molecular beam epitaxial growth and characterization of dilute nitride InAsN:Sb. X-ray diffraction, energy dispersive x-ray spectrometry, and electron probe microanalysis revealed that nitrogen incorporation is significantly enhanced by introduction of Sb flux during growth, together with a dramatic improvement of the photoluminescence. These observations were attributed to the surfactant effect of Sb which suppresses the surface diffusion length of nitrogen and improves the homogeneity of the alloy. Sb incorporation is enhanced with the presence of nitrogen which was associated with the surface kinetic of growth. InAsN:Sb/InAs p-i-n light emitting diodes operating near 4.0 {mu}m were also realized.

36 MATERIALS SCIENCE↗

Performance enhancement of n-channel inversion type In{sub x}Ga{sub 1-x}As metal-oxide-semiconductor field effect transistor using ex situ deposited thin amorphous silicon layer

Significant enhancement in metal-oxide-semiconductor field effect transistor (MOSFET) transport characteristics is achieved with In{sub x}Ga{sub 1-x}As (x=0.53, x=0.20) channel material using ex situ plasma enhanced chemical vapor deposited amorphous Si layer. In{sub x}Ga{sub 1-x}As MOSFETs (L=2 {mu}m, V{sub gs}-V{sub t}=2.0 V) with Si interlayer show a maximum drain current of 290 mA/mm (x=0.53) and 2 {mu}A/mm (x=0.20), which are much higher compared to devices without a Si interlayer. However, charge pumping measurements show a lower average interface state density near the intrinsic Fermi level for devices without the silicon interlayer indicating that a reduction in the midgap interface state density is not responsible for the improved transport characteristics.

36 MATERIALS SCIENCE↗