Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Winds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Sequential High-Resolution Wind Profile Measurements

Tropospheric flow and lower stratospheric flow as measured by 94 sequences of high-resolution Jimsphere balloon data are presented and discussed. The 70 and 24 sequential series are presented for the Kennedy Space Center, Florida, and Point Mugu, California, areas, respectively. Supplemental data, consisting of the associative temperature profiles and surface and 200 mb synoptic maps, are also presented. The measurements are discussed relative to both the engineering and disciplinary areas. An initial subjective analysis of mesoscale features observed on some sequences is presented.

Johnson, D. L.↗
DOE OSTI2022

Turbine scale and siting considerations in wind plant layout optimization and implications for capacity density

Improvements in wind energy technology, reduced costs, and ambitious clean energy goals have led to projections of high wind contribution in coming years. Developing methodologies to design wind plants with a variety of siting constraints and turbine sizes helps enable high wind penetration, and gain a better understanding of how wind plants are sensitive to setback constraints and turbine design. In this paper, we present a two-step optimization method to simultaneously determine the optimal number of turbines and their locations in a wind plant domain divided into many small, discrete parcels. We present the optimized performance metrics of a wind plant optimized with different turbine sizes and ratings, and with different siting restrictions within the wind plant. Our results indicate that taller and larger turbines are more sensitive to increasing siting constraints. We also compare the optimal wind plant layouts and performance for wind plants optimized for minimum COE and maximum profit. Wind plants optimized for profit had 130%-190% of the capacity of plants optimized for COE, which demonstrates that the optimal results are greatly affected by the objective function, which should be carefully considered. Finally, in this paper we demonstrate the effect of increasing siting constraints on wind plant capacity density, and how the results change when different land areas are used to calculate capacity density. When using the entire wind plant boundary area to determine capacity density, increasing siting constraints decreases the capacity density. However, when we only use the available area (the area left after removing the siting constraints) to calculate the capacity density, increasing the siting constraints increases capacity density. This is a critical insight because of how capacity density is typically defined and used in research, and has important implications for assessment of technical potential and capacity expansion modeling, as well as future wind deployment potential.

17 WIND ENERGY↗
DOE OSTI2019

Methodology to predict annual yield losses and gains caused by solar module design and materials under field exposure

Solar cells and modules are usually optimized separately under standard test conditions (STC). However, the actual performance under field exposure depends on module design, installation and environmental conditions. This work therefore presents a methodology to predict the annual yield of crystalline silicon solar modules for varying module configurations and environments using a time step simulation approach. We define and quantify 12 effects that affect the annual module performance, starting with solar cells in air under STC to a complete module under realistic conditions. We consider the interaction of optical, thermal and electrical effects in the module and combine it with an angular, spectral and time resolved light source. The model enables understanding the impact of the module environment, such as regions with high wind speeds or high diffuse light, on the annual output of a particular module type. We validate our model with measured power and temperature data for crystalline silicon heterojunction solar cell modules and find an agreement of the annual yield within 0.7%. We quantify the annual gains and losses for this module and identify that major losses are caused by elevated operating temperatures (2.3%) and reflection losses at the front glass (2.6%). Critically, the coupling gains at the cell surface increase significantly by 1.5% when considering angular light irradiance compared to normal incidence. To conclude, we apply our Cell-to-Module-Yield method to a 72-cell mono-crystalline PERC module, where the main annual yield losses are caused by reflection at the front glass and ohmic losses in the connector ribbons.

14 SOLAR ENERGY↗
DOE OSTI2017

BeamDyn: a high-fidelity wind turbine blade solver in the FAST modular framework

Here, this paper presents a numerical implementation of the geometrically exact beam theory based on the Legendre-spectral-finite-element (LSFE) method. The displacement-based geometrically exact beam theory is presented, and the special treatment of three-dimensional rotation parameters is reviewed. An LSFE is a high-order finite element with nodes located at the Gauss-Legendre-Lobatto points. These elements can be an order of magnitude more computationally efficient than low-order finite elements for a given accuracy level. The new module, BeamDyn, is implemented in the FAST modularization framework for dynamic simulation of highly flexible composite-material wind turbine blades within the FAST aeroelastic engineering model. The framework allows for fully interactive simulations of turbine blades in operating conditions. Numerical examples are provided to validate BeamDyn and examine the LSFE performance as well as the coupling algorithm in the FAST modularization framework. BeamDyn can also be used as a stand-alone high-fidelity beam tool.

17 WIND ENERGY↗
NASA NTRS1994

X-ray bright points and high-speed wind streams: A preliminary analysis from Yohkoh and Ulysses data

The following aspect of the solar wind mass flux, and of its variation, is examined: whether coronal plumes might be responsible for the long-term variability of the mass flux in high-speed streams emanating from coronal holes. The assumption that plumes are rooted in coronal bright points (BP's) is made. The behavior of X-ray BP's, imaged by the Yohkoh soft X-ray telescope (SXT), during a seven month period when Ulysses experiments observed a series of recurrent high-speed streams, is analyzed. If plumes/BP's are sources of the wind mass flux, changes in the coronal hole BP density to mimic changes of the mass flux in high-speed streams are expected. SOHO will have the capability of measuring the solar wind speed/density at small heliocentric distances while simultaneously observing coronal BP's and coronal plumes.

Poletto, Giannina↗
DOE OSTI2020

Effects of Deep Reductions in Energy Storage Costs on Highly Reliable Wind and Solar Electricity Systems.

We use 36 years (1980-2015) of hourly weather data over the contiguous United States (CONUS) to assess the impact of low-cost energy storage on highly reliable electricity systems that use only variable renewable energy (VRE; wind and solar photovoltaics). Even assuming perfect transmission of wind and solar generation aggregated over CONUS, energy storage costs would need to decrease several hundred-fold from current costs (to ~$1/kWh) in fully VRE electricity systems to yield highly reliable electricity without extensive curtailment of VRE generation. The role of energy storage changes from high-cost storage competing with curtailment to fill short-term gaps between VRE generation and hourly demand to near-free storage serving as seasonal storage for VRE resources. Energy storage faces "double penalties" in VRE/storage systems: with increasing capacity, (1) the additional storage is used less frequently and (2) hourly electricity costs would become less volatile, thus reducing price arbitrage opportunities for the additional storage.

14 SOLAR ENERGY↗
DOE OSTI2017

A Novel PCB Winding Transformer with Controllable Leakage Integration for a 6.6kW 500kHz High Efficiency High Density Bi-Directional On-Board Charger

Printed Circuit Board (PCB) transformer has been widely used in low power applications. Compared with conventional litz-wire transformer, the manufacture process is greatly simplified and the parasitic is much easier to control. However, in high power applications like on-board charger for electric vehicle, no one has ever done it due to the limitation of high winding loss and high multi-layer PCB cost. The emerging wideband- gap devices provide the opportunity to adopt PCB transformer in high power applications. In addition, the low inductance requirement brought by high frequency also makes it possible to realize magnetic integration in PCB transformer. In this paper, by using a two stage variable DC-link voltage structure, a novel 6-layer only PCB winding transformer structure is proposed for the second stage of the 6.6kW on-board charger, of which leakage inductance is controllable without sacrificing winding loss. A 6.6kW 500kHz prototype with almost 98% efficiency and 130W/in3 power density is built to verify the feasibility of the proposed PCB winding transformer.

42 ENGINEERING↗
NASA NTRS2005

Optically Based Flame Detection in the NASA Langley 8-ft High- Temperature Wind Tunnel

Two optically based flame-detection systems have been developed for use in NASA Langley's 8-Foot High-Temperature Tunnel (8-ft HTT). These systems are used to detect the presence and stability of the main-burner and pilot-level flames during facility operation. System design considerations will be discussed, and a detailed description of the system components and circuit diagrams will be provided in the Appendices of this report. A more detailed description of the manufacturing process used in the fabrication of the fiber-optic probes is covered in NASA TM-2001-211233.

Borg, Stephen E.↗
NASA NTRS2011

30 WS North Base Wind Study

The 30 Weather Squadron (30 WS) is concerned about strong winds observed at their northern towers without advance warning. They state that terrain influences along the extreme northern fringes of Vandenberg Air Force Base (VAFB) make it difficult for forecasters to issue timely and accurate high wind warnings for northeasterly wind events. These events tend to occur during the winter or early spring when they are under the influence of the Great Basin high pressure weather regime. The Launch Weather Officers (LWOs) have seen these rapid wind increases in the current northern Towers 60, 70 and 71 in excess of their 35 kt operational warning threshold. For this task, the 30 WS requested the Applied Meteorology Unit (AMU) analyze data from days when these towers reported winds in excess of 35 kt and determine if there were any precursors in the observations that would allow the LWOs to better forecast and warn their operational customers for these wind events. The 30 WS provided wind tower data for the cool season (October - March) from the period January 2004-March 20 IO. The AMU decoded and evaluated the wind tower data for 66 days identified by the 30 WS as having high-wind events. Out of the 66 event days, only 30 had wind speed observations of > or =35 kt from at least one of the three northern towers. The AMU analyzed surface and upper air charts to determine the synoptic conditions for each event day along with tower peak wind speed and direction time series and wind rose charts for all 30 event days. The analysis revealed a trend on all event days in which the tower winds shifted to the northeast for a period of time before the first recorded > or =35 kt wind speed. The time periods for the 30 event days ranged from 20 minutes to several hours, with a median value of 110 minutes. This trend, if monitored, could give the 30 WS forecasters a precursor to assist in issuing an operational warning before a high wind event occurs. The AMU recommends developing a high-wind alert capability for VAFB using a local mesoscale model to forecast these wind events. The model should incorporate all of the VAFB local data sets and have a forecast capability of between 2 to 24 hours. Such a model would allow the meteorologists at VAFB to alert the operational customers of high wind events in a timely manner so protective action could be taken.

Wheeler, Mark↗
DOE OSTI2024

Understanding the Influence of Urban Form on the Spatial Pattern of Precipitation

Urban areas are known to modify the spatial pattern of precipitation climatology. Existing observational evidence suggests that precipitation can be enhanced downwind of a city. Among the proposed mechanisms, the thermodynamic and aerodynamic processes in the urban lower atmosphere interact with the meteorological conditions and can play a key role in determining the resulting precipitation patterns. In addition, these processes are influenced by urban form, such as the impervious surface extent. This study aims to unravel how different urban forms impact the spatial patterns of precipitation climatology under different meteorological conditions. We use the Multi-Radar Multi-Sensor quantitative precipitation estimation data products and analyze the hourly precipitation maps for 27 selected cities across the continental United States from the years 2015–2021 summer months. Results show that about 80% of the studied cities exhibit a statistically significant downwind enhancement of precipitation. Additionally, we find that the precipitation pattern tends to be more spatially clustered in intensity under higher wind speed; the location of radial precipitation maxima is located closer to the city center under low background winds but shifts downwind under high wind conditions. The magnitude of downwind precipitation enhancement is highly dependent on wind directions and is positively correlated with the city size for the south, southwest, and west directions. This study presents observational evidence through a cross-city analysis that the urban precipitation pattern can be influenced by the urban modification of atmospheric processes, providing insight into the mechanistic link between future urban land-use change and hydroclimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Assessment of Model Hub Height Wind Speed Performance Using DOE Lidar Buoy Data

As the offshore wind industry continues to gain momentum both in the U.S. and globally, reanalysis products remain essential tools for the lifecycle of a wind farm. From project siting and production estimates to determining construction and maintenance windows, reanalysis products play an important role. These regional and global long-term models also serve as inputs to higher resolution models. With such wide-ranging impacts on the offshore wind industry, the need for validation of reanalysis products is strong, particularly at typical turbine hub heights. Pacific Northwest National Laboratory (PNNL) operates two AXYS WindSentinelTM buoys for the U.S. Department of Energy (DOE) in order to collect meteorological and oceanographic data, including hub height wind speed, in areas of interest for offshore wind development. This work uses DOE buoy observations off the coasts of New Jersey and Virginia to evaluate the performance of Modern Era Retrospective Analysis for Research and Applications-2 (MERRA-2), the North American Regional Reanalysis (NARR), the European Center for Medium-Range Weather Forecasts (ECMWF) Reanalysis 5th generation (ERA5), and the National Oceanic and Atmospheric Administration (NOAA) assimilation system Rapid Refresh (RAP). Biases and degrees of correspondence are determined for each reanalysis product in order to provide insights on the performance and uncertainty for long-term wind resource characterization. With the baseline metrics determined, this work proceeds with an investigation into the sources of large deviations between the modeled and observed hub height wind speeds during the East Coast lidar buoy deployments. Consistent sources of reanalysis model error include stably stratified flow conditions, high wind shear, flow parallel to the coastline, and tropical and winter storms. For the near shore New Jersey location, offshore winds (i.e. blowing from land to water) tend to be associated with model overestimation of observed hub height wind speed, while winds parallel to the coastline are correlated with model underestimation of wind speed. Similarly, near the Virginia buoy, during southerly winds (parallel to the coastline) models underestimate the observed wind speed due to coastal upwelling. Reanalysis model wind speeds underestimate the hub height winds with increasing stable atmospheric stratification. Reanalysis model biases are seen when the observed wind speeds approach or exceed typical turbine cut-out speeds (around 20 m s-1). Large model errors during winter and tropical storm events, high wind speed events, and ramp events are often the result of wind speed timing and magnitude offsets. Overall, ERA5 provides the most successful representation of observed offshore hub height wind speeds at the U.S. East Coast buoy locations and is therefore best suited as an input boundary condition for model case studies. ERA5 performs well for a variety of atmospheric phenomena, including storms and sea breezes, however RAP, the next most successful reanalysis model, performs best in capturing the frequency of ramp events.

17 WIND ENERGY↗
NASA NTRS1989

The winds of high luminosity late-type bright stars

The occurrence and characteristics of the Fe II line asymmetries were studied to determine the radial dependence of the wind velocity for each star. The dependence of the Fe II profiles on spectral type and luminosity class and thus the variation of the velocity fields with stellar type was also investigated. This allows the generality of the results reported for alpha Ori by Carpenter (1984b) to be judged. In addition, new atomic data was used along with observations of the C II (UV 0.01) multiplet to estimate N(sub e) in the stellar winds. Measures of relative Fe II fluxes can be used in a probability-of-escape model to determine the opacity and hydrogen column density versus height in the chromosphere of each star. Finally, analysis of the fluorescent Fe II lines (pumped by Ly alpha) near 2507 A will yield estimates of the intrinsic stellar Ly alpha flux that cannot be measured directly because of interstellar and circumstellar absorption. One important goal of the effort was to acquire high resolution spectra of the whole 2300 to 3200 A region of 13 luminous K and M stars as a data base that will be enormously valuable in planning observations with the Hubble Space Telescope High Resolution Spectrograph. It is also proposed to follow up the recent discovery of significant variations in the Fe II chromospheric emission line profiles from the M-giant Gamma Cru for the purpose of determining the underlying cause of the variations.

Stencel, Robert E.↗
NASA NTRS2011

High-Resolution Wind Measurements for Offshore Wind Energy Development

A mathematical transform, called the Rosette Transform, together with a new method, called the Dense Sampling Method, have been developed. The Rosette Transform is invented to apply to both the mean part and the fluctuating part of a targeted radar signature using the Dense Sampling Method to construct the data in a high-resolution grid at 1-km posting for wind measurements over water surfaces such as oceans or lakes.

Nghiem, Son V.↗
NASA NTRS1986

Wind effects on coastal zone color scanner chlorophyll patterns in the U.S. Mid-Atlantic Bight during spring 1979

Coastal zone color scanner (CZCS) chlorophyll concentration increases in the Mid-Atlantic Bight were associated with high wind speeds in continental shelf waters during March and May 1979. Maximum spring CZCS chlorophyll concentrations occurred during April when the water column was not thermally stratified and were spatially and temporally associated with reductions in wind speed both in onshelf and in offshelf regions. Increased chlorophyll concentrations in offshelf waters were associated with high wind speeds during May when a deep chlorophyll maximum was present. Chlorophyll patchiness was observed on length scales typical of those controlled by biological processes during the April low-wind period but not during March or May when wind speeds were greater. The spring CZCS chlorophyll maximum in the southern portion of the Mid-Atlantic Bight occurred in response to a reduction in mixed layer depth caused by decreased wind speeds and not by increased water column stratification.

Eslinger, David L.↗