SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Disclosed are passive NOx adsorbers and methods for synthesizing the same. Small-pore zeolitic materials with practical loadings of transition metals atomically dispersed in the micropores are described herein. Also demonstrated are simple and scalable synthesis routes to high loadings of atomically dispersed transition metals in the micropores of a small-pore zeolite.
A boiler has a shell surrounding a vertical centerline. The shell defines an inner surface having an inner diameter and an inner length extending between an upper upstream end and a lower downstream end. The inner surface defines a hollow interior, the boiler having a pre-combustion zone, a combustion zone downstream from the pre-combustion zone, and a post-combustion zone downstream from the combustion zone. The shell is tapered outward along its length in at least a portion of the combustion zone. An oxidizer inlet is in fluid communication with the pre-combustion zone, and a fuel nozzle introduces fuel into the combustion zone. A tube assembly is mounted in the hollow interior of the shell for transferring heat to fluid flowing through the tube assembly. A flue duct is in fluid communication with the post-combustion zone for transporting flue gases from the hollow interior.
A coaxial thermocouple includes a wire, an insulation layer surrounding the wire, a sheath surrounding the insulation layer, and an electrical junction formed between the wire and the sheath and at one longitudinal end of the coaxial thermocouple, the electrical junction including a swaged end with an outer diameter of the sheath reducing in diameter along a longitudinal length of the coaxial thermocouple until the sheath contacts the wire within the insulation layer. The wire includes a first material and the sheath includes a second material where the first material includes one of molybdenum (Mo) or niobium (Nb) and the second material includes the other of molybdenum (Mo) or niobium (Nb).
A system or method for thermal storage includes a recess or containment unit having a first storage layer and a second storage layer comprising a permeable filler material. An intermediate layer is disposed between the storage layers. A primary well traverses the layer in the recess. The primary well is in thermal communication with the first permeable filler material and the second permeable filler material. A heat source is provided for heating an inlet fluid. An input pump is in fluid communication with the primary well and the heat source. The primary well receives heated inlet fluid from the inlet pump and injects the fluid into the second layers. The heated inlet fluid transfers heat to the respective permeable filler material radially from the primary well toward an outer periphery of the thermocline recess.
This report presents a comprehensive study of developing ultrasonic wave and acoustic emission (AE) techniques for long-term monitoring of alkali-silica reaction (ASR) development in concrete. Small, medium, and full-scale concrete specimens were cast, conditioned, and monitored for various periods, from at least one year to 2.4 years. The reactive concrete specimens contain coarse or fine reactive aggregates to study the effects of different types of reactive aggregates. Confinements were also designed to simulate the 2-dimensional confinement effects of reinforcement in the shield building of nuclear power plants. The concrete specimens were stored in a environmental chamber with high humidity and high temperature to accelerate the ASR development. The ultrasonic monitoring data shows high sensitivity to ASR development and could detect cracking initiation well before visible surface cracks occurred. However, the linear ultrasonic analysis based on wave velocity is strongly affected by temperature variation. Therefore, a nonlinear ultrasonic method was proposed to measure thermally induced nonlinear acoustic responses of concrete (thermal modulation of ultrasonic wave). The measured nonlinear acoustic parameter shows a high correlation with ASR expansion across specimens with different reactive aggregates and confinement conditions. The same conclusion was obtained from nonlinear resonance tests on small concrete prisms. Compared to the linear acoustic methods, the nonlinear tests show high sensitivities to ASR damage from internal microcracking initiation at the early stage to visible cracks at the late stage of ASR. The attributes of the thermal modulation of nonlinear ultrasonic method include high sensitivity, immunity to temperature effects, and strong correlation with ASR expansion, which demonstrate great potentials of the nonlinear ultrasonic method for diagnosis of ASR damage and prediction of concrete deterioration process. Acoustic emission is a passive sensing technique for damage assessment, and access to only one surface is needed even for thick and heavily reinforced elements such as the walls utilized for nuclear shield building. Additionally, relatively few sensors are required to monitor the progression of the damage process. Results indicate that the AE data can be related to the damage rating index, which is a petrography-based means of assessing damage due to ASR in reinforced concrete. Furthermore, AE is capable of detecting ASR damage long before surface cracking is visually noticeable. Boundary conditions play in important role in the progression of ASR damage and differences in boundary conditions are reflected in the AE data. Entropy based data assessment methods provide a means to assess the damage state, and convolutional neural network based data assessment provided a means to assess the damage state in real-time. Results indicate that artificial neural network models may be used as a means to predict volumetric expansion based on AE data.
The present invention relates, in part, to a discovery of a method for using atomic layer deposition (ALD) to improve the stability of refractory materials in high temperature steam, and compositions produced by the method.
Preparation, characterization, and an electrochemical study of Mg 0.1 V 2 O 5 prepared by a novel sol-gel method with no high-temperature post-processing are disclosed. Cyclic voltammetry showed the material to be quasi-reversible, with improved kinetics in an acetonitrile-, relative to a carbonate-, based electrolyte. Galvanostatic test data under a C/10 discharge showed a delivered capacity >250 mAh/g over several cycles. Based on these results, a magnesium anode battery, as disclosed, would yield an average operating voltage ˜3.2 Volts with an energy density ˜800 mWh/g for the cathode material, making the newly synthesized material a viable cathode material for secondary magnesium batteries.
Abstract Through conversion of land cover to more built-up, impervious surfaces, cities create hotter environments than their surroundings for urban residents, with large differences expected between different parts of the city. Existing measurements of ambient air temperature and heat stress, however, are often insufficient to capture the intra-urban variability in heat exposure. This study provides a replicable method for modeling air temperature, humidity, and moist heat stress over the urban area of Chapel Hill while engaging citizens to collect high-temporal and spatially-resolved air temperature and humidity measurements. We use low-cost, consumer-grade sensors combined with satellite remote sensing data and machine learning to map urban air temperature and relative humidity over various land-cover classes to understand intra-urban spatial variability of ambient heat exposure at a relatively high resolution (10 m). Our findings show that individuals may be exposed to higher levels of air temperature and moist heat stress than weather station data suggest, and that the ambient heat exposure varies according to land cover type, with tree-covered land the coolest and built-up areas the warmest, and time of day, with higher air temperatures observed during the early afternoon. Combining our resulting dataset with sociodemographic data, policymakers and urban planners in Chapel Hill can use data output from this method to identify areas exposed to high temperature and moist heat stress as a first step to design effective mitigation measures.
As the nuclear industry moves towards licensing and constructing advanced reactors, new attention has been focused on the advanced reactor designs that have past operational experience, such as pebble-bed high-temperature gas-cooled reactors (PB-HTGRs). Pebble-bed reactor designs have many advantages, such as their higher operating temperatures and online refueling capabilities. However, high-fidelity computational modeling of pebble-bed reactor designs, from reactor startup to operation at equilibrium, is more challenging compared to conventionally fueled reactors due to the continuous movement of the fuel pebbles through the reactor during operation. In previous work at Oak Ridge National Laboratory (ORNL), the SCALE Leap-In method for Cores at Equilibrium (SLICE) was developed around tools within the SCALE code system. This iterative method can effectively generate pebble-bed reactor zone-wise fuel inventories at equilibrium core operation within a reasonable computational time. The objective of this work was to further verify the ORNL SLICE method and to investigate the impact of considering temperature profiles during the application of the method. The SLICE method was applied to a modular high-temperature gas-cooled reactor design based upon publicly available design specifications of the Xe-100 pebble-bed reactor. Upon comparing the results from the SLICE method to published literature, the differences in the eigenvalue k effective were on the order of several hundred pcm (percent millirho). To investigate one possible cause of these differences, a study looking at the sensitivity of the full-core equilibrium k effective and discharge nuclide inventory to temperature was performed by developing equilibrium cores of two additional temperature profiles. From this temperature study, differences on the order of hundreds of pcm for the full-core equilibrium k effective , and up to 15% difference for the discharge inventories were found. In conclusion, these results indicated the strong dependence on temperature that needs to be considered for future work in equilibrium modeling of PB-HTGRs.
Triple oxygen isotopic compositions ( 16 O, 17 O, 18 O) have conventionally been measured via isotope ratio mass spectrometry using O 2 as an analyte. Conversion of sample oxygen to O 2 typically utilizes fluorination chemistry or catalytic equilibration between CO 2 and O 2 . Recently, laser spectroscopy has become a viable alternative for triple oxygen isotope (Δ' 17 O) measurements due to its ease and rapid throughput. Laser spectrometers are currently available for Δ' 17 O analysis of either H 2 O or CO 2 as the analyte gas. So far, these instruments have been used to measure Δ' 17 O of water, carbonate (CO 2 liberated by acid digestion), and atmospheric CO 2 samples. Here, we present a new method for high-precision Δ' 17 O analysis of CO 2 via tunable infrared laser direct absorption spectroscopy that is compatible with a wider range of geochemically important materials. This approach involves converting sample oxygen to CO 2 in two steps. First, the sample oxygen is liberated and reduced to CO by high-temperature conversion at 1450 °C in the presence of excess elemental carbon. Then, CO is catalytically converted to CO 2 over hot nickel at 350 °C. The conversion process is rapid (10 to 30 min) and quantitative. Spectroscopic Δ' 17 O analysis of the resulting CO 2 takes approximately 45 min. By measuring several oxygen isotope standards, we demonstrate that the method is precise (1σ = 12 per meg for procedural replicates) and accurate (within 11 per meg of previously reported values). The method can be applied to most pyrolytic materials where quantitative oxygen conversion is attainable, such as sulfate, phosphate, nitrate, and oxide minerals, water, and organic molecules.
In this paper, we demonstrate a method of measuring the flexural elastic modulus of ceramics at an intermediate (~millimeter) scale at high temperatures. We used a picosecond laser to precisely cut microbeams from the location of interest in a bulk ceramic. They had a cross-section of approximately 100 μm × 300 μm and a length of ~1 cm. They were then tested in a thermal mechanical analyzer at room temperature, 500 °C, 800 °C, and 1100 °C using the four-point flexural testing method. We compared the elastic moduli of high-purity Al2O3 and AlN measured by our method with the reported values in the literature and found that the difference was less than 5% for both materials. This paper provides a new and accurate method of characterizing the high-temperature elastic modulus of miniature samples extracted from representative/selected areas of bulk materials.
An exploration of the synthetic and structural phase space of rare earth hybrid double perovskites A 2 B'BX 6 (A = organocation, B' = M + , B = M 3+ , X = molecular bridging anion) that include X = NO 3 – and B' = alkali metal is reported, complementing earlier studies of the [Me 4 N] 2 [KB(NO 3 ) 6 ] (B = Am, Cm, La–Nd, Sm–Lu, Y) (Me 4 N = (CH 3 ) 4 N + ) compounds. In the present efforts, the synthetic phase space of these systems is explored by varying the identity of the alkali metal ion at the B'-site. Herein, we report three new series of the form [Me 4 N] 2 [B'B(NO 3 ) 6 ] (B = La–Nd, Sm–Gd; B' = Na, Rb, Cs). The early members of the Na-series crystallize in the trigonal space group R3̅ from La to Nd where a phase transition occurs in the phase between 273 and 300 K, going from R3̅ to the high-symmetry, cubic space group Fm3̅m. The preceding trigonal members of the Na-series also undergo phase transitions to cubic symmetry at temperatures above 300 K, establishing a decreasing trend in the phase-transition temperature. The remainder of the Na-series, as well as the Rb- and Cs-series, all crystallize in Fm3̅m at 300 K. The temperature-dependent phase behavior of the synthesized phases is studied via variable-temperature spectroscopic methods and high-resolution powder X-ray diffractometry. All phases were characterized via single-crystal and powder X-ray diffraction and Fourier transform infrared (FT-IR) and Raman spectroscopic methods. These results demonstrate the versatility of the perovskite structure type to include rare earth ions, nitrate ions, and a suite of alkali metal ions and serve as a foundation for the design of functional rare earth hybrid double perovskite materials such as those possessing useful multiferroic, optical, and magnetic properties.
There is an increasing interest in understanding the performance and properties of ultra-high temperature ceramics due to their high melting points (<3000 °C) that make them promising for extreme environment applications. In-situ high temperature X-ray diffraction experiments were performed on TiB 2 beads up to ~3050 °C. For these experiments, TiB 2 powders were fabricated into spherical beads via gel casting methods and densified in a high temperature graphite furnace. These sample beads were then levitated in a conical nozzle levitator with reducing atmosphere (3% H 2 -Ar) while being heated using a 400 W CO 2 laser. During levitation a collimated synchrotron X-ray source was used to perform in-situ, temperature-dependent structural characterizations. The anisotropic coefficients of thermal expansion of TiB 2 were characterized as a function of temperature up to ~3050 °C. Elucidation of these properties are critical for the advancement of TiB 2 ceramics and other transition metal di-borides for use in high temperature applications such as hypersonic platforms, nuclear reactors, and atmospheric re-entry.
High-temperature ammonium bifluoride (ABF) fusions were evaluated for potential use in rapid dissolution of post-detonation nuclear debris. The ABF fusion was carried out in a Pt crucible which allowed evaluation of higher fusion and evaporation temperatures. The high-temperature ABF fusion dissolution method was evaluated using geological reference materials: USGS QLO-1a Quartz Latite, USGS SDC-1 Mica Schist, and NIST 278 Obsidian Rock. The optimized dissolution method involved a 10 min fusion at 540 °C, a 5 min reflux in 8 M HNO 3 , an evaporation at 300 °C and final dilution into 45 mL of 2% (v/v) HNO3. The final solution was filtered after heating at 105 °C using a hotblock. This dissolution method was simple, requiring only a hotplate or hotblock, filtered samples were available for ICP-MS analysis or radiochemical separation within 150 min, and was found to have high (>90%) recovery for many isotopes of interest in nuclear forensics applications. U and Pu in the dissolved material was separated using TEVA and UTEVA extraction chromatography columns, a process which resulted in >90% recovery. An irradiated U tracer was spiked into the material prior to dissolution and analyzed for recovery of major fission products and 239Np. The monitored radionuclides had recoveries of greater than 90%, except for the volatile radioiodine isotopes.
III-nitrides have fomented a revolution in the lighting industry and are poised to make a huge impact in the field of power electronics. In the III-nitride family, the crystal growth and use of hexagonal BN (h-BN) as an ultrawide bandgap (UWBG) semiconductor are much less developed. Bulk crystals of h-BN produced by the high-temperature/high-pressure and the metal flux solution methods possess very high crystalline and optical qualities but are impractical to serve as substrates or for device implementation as their sizes are typically in millimeters. The development of crystal growth technologies for producing thick epitaxial films (or quasi-bulk or semi-bulk crystals) in large wafer sizes with high crystalline quality is a prerequisite for utilizing h-BN as an UWBG electronic material. Compared to traditional III-nitrides, BN has another unique application as solid-state neutron detectors, which however, also require the development of quasi-bulk crystals to provide high detection efficiencies because the theoretical efficiency (ηi) relates to the detector thickness (d) by ηi=1−e−dλ, where λ denotes the thermal neutron absorption length which is 47 μm (237 μm) for 10B-enriched (natural) h-BN. We provide an overview and recent progress toward the development of h-BN quasi-bulk crystals via hydride vapor phase epitaxy (HVPE) growth and the attainment of thermal neutron detectors based on 100 μm thick 10B-enriched h-BN with a record efficiency of 60%. The thermal neutron detection efficiency was shown to enhance at elevated temperatures. Benchmarking the crystalline and optical qualities of h-BN quasi-bulk crystals with the state-of-the-art mm-sized bulk crystal flakes and 0.5 μm thick epitaxial films identified that reducing the density of native defects such as vacancies remains the most critical task for h-BN quasi-bulk crystal growth by HVPE.
V 2 O 5 is a promising sodium-ion cathode material due to its high theoretical capacity (147 mAh/g) and working voltage (3.3 V vs Na/Na + ). Among its various crystal phases, γ′-V 2 O 5 has a large interlayer spacing, ensuring the reversible insertion–extraction of sodium ions. However, current synthesis methods for γ′-V2O5 require high temperatures (>600 °C) and toxic chemicals (NO 2 BF 4 ), which make the preparation demanding. Herein, we put forward an electrochemical phase engineering method combining thermal annealing and electrochemistry to easily prepare thin-film γ′-V 2 O 5 . Electrochemical characterization shows near-ideal performance as a thin-film cathode material for sodium-ion batteries. It shows a measured initial capacity of 152 mAh/g, a high working voltage (3.3 V vs Na + /Na), and an exceptional Coulombic efficiency of 98%, significantly surpassing previously reported values (∼50% CE). Cyclic voltammogram and galvanostatic capacity curves confirm the sodium insertion–deinsertion, which remains stable at 2 C. The γ′-V 2 O 5 thin film has electrochemical performance similar to γ′-V 2 O 5 powder, indicating another workable morphology of γ′-V 2 O 5 for sodium-ion batteries.
Through this collaborative effort, a new 3D printing platform for ceramics called laser-induced slip casting (LIS) was explored and developed for improving the processing and manufacture of silicon carbide (SiC), a high temperature ceramic material. This method prints layers of ceramic slips/slurries with subsequent selective-laser heating to dry each layer to build a 3D structure. The completed and dried part is then sintered. This manufacturing process is inherently lower cost than alternative ceramic printing methods such as binder jet technology or stereolithography when it comes to the feedstock material but is more expensive than robocasting or direct ink writing. However, it has the potential to make more controlled parts with less defects compared to robocasting. The largest cost is the heating source for the printer. With this technique, there is potential to make large ceramic parts in a near-net shape. Further, there is no known commercial manufacturing of 3D printed ceramics that creates a large range of different high-density ceramics at large scale. The goals and outcomes for the development of the new printing technology were: 1) assessing the technology with alumina by characterizing coupons, 2) printing and sintering of silicon carbide (SiC), and 3) characterization and properties testing of materials printed and a scale-up of SiC part(s). Through this collaborative project, it was sought to provide the best solution to achieving highly dense and near-net shaped ceramic parts at large scale and reduced cost. The goal was to produce high density sintered materials for applications in defense, energy generating systems, armor, and wear parts using 3D printing methods. Variables including powder particle sizes, dispersant molecular weights (MWs), binders, printing parameters, and post processing were explored as well as the characterization of the physical properties (add specifics here).
High temperature particle flow properties necessary to predict granular flow behavior for solar thermal energy storage applications were measured and calculated for Carbobead CP 30/60 up to 800 °C. Here, the measured properties included elastic and shear moduli, particle-particle coefficients of static sliding and rolling friction, and particle-particle coefficients of restitution. Poisson’s ratio was calculated with elastic and shear moduli. The flow properties were used as inputs for a numerical model using the discrete element method to examine granular flows along an inclined plane at high temperature. The flow behavior was strongly influenced by the coefficients of static friction, which impacted the particle residence time, shear effects from the side walls, and particle flow mass flux. An 8.7%, 15.6%, and 8.5% increase and 37.9% decrease in steady state mass flow rate was observed for 200 °C, 400 °C, 600 °C, and 800 °C, respectively, when compared to room temperature simulations. A 52%, 59%, and 33% decrease in the time to reach steady state was observed for 200 °C, 400 °C, and 600 °C, respectively, while a 53% increase in time was observed for 800 °C. A significant delay in the flow development at 800 °C was observed due to significantly higher frictional forces.