Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HARDENING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Studies on Highly Fluxed Iron Ore Pellets Hardened at 1100 °C to 1200 °C

The behaviors of highly fluxed (basicity 2, 4, 6, and 8) iron ore pellets heat hardened in the temperature range 1100 °C to 1200 °C were examined and are reported here. The highly fluxed (basicity 8) pellets exhibited 103 kg/pellet crushing strength and 43.65 pct porosity when heat hardened at 1180 °C. During heat hardening, calcium di-ferrite and calcium ferrite phases were observed; however, when they were heated at 1200 °C, high crushing strength (458.63 kg/pellet) with low porosity (4.57 pct) were noted due to low melting eutectic formation. In this study, it was possible to prepare highly fluxed pellets without sticking at 1180 °C with good strength and porosity.

36 MATERIALS SCIENCE↗

Modeling of Work Hardening During Hot Rolling of Vanadium and Niobium Microalloyed Steels in the Low Temperature Austenite Region

This work extends the application of the well-established Estrin and Mecking (EM) work-hardening model in unstable low temperature austenite region. The interaction between work hardening, recovery and softening attributed to recrystallization and transformation to ferrite under dynamic conditions is considered. Experimental parameters were varied to study the effects of strain, strain rate and temperature during hot rolling in the low temperature austenite region. Hot compression tests were performed two microalloyed steels—one containing V and the other Nb—at strain rates between 0.1 and 10 s{sup −1} over a temperature range of 750-1000 °C. A model is presented that describes the influence of dynamic recovery on flow behavior in the unstable austenite region. The modified work-hardening model incorporates an additional fitting parameter to the EM model and is dependent on the recovery and softening rates. The new model improved prediction in the unstable austenite region, while the original EM model gave better correlation at relatively higher temperatures when dynamic recrystallization is dominant or at relatively lower temperatures when only dynamic recrystallization to ferrite was the softening mechanism.

36 MATERIALS SCIENCE↗

An improved Armstrong–Frederick-Type Plasticity Model for Stable Cyclic Stress–Strain Responses Considering Nonproportional Hardening

This paper modified an Armstrong–Frederick-type plasticity model for investigating the stable cyclic deformation behavior of metallic materials with different sensitivity to nonproportional loadings. In the modified model, the nonproportionality factor and nonproportional cyclic hardening coefficient coupled with the Jiang–Sehitoglu incremental plasticity model were used to estimate the stable stress–strain responses of the two materials (1045HR steel and 304 stainless steel) under various tension–torsion strain paths. A new equation was proposed to calculate the nonproportionality factor on the basis of the minimum normal strain range. Procedures to determine the minimum normal strain range were presented for general multiaxial loadings. Then, the modified model requires only the cyclic strain hardening exponent and cyclic strength coefficient to determine the material constants. It is convenient for predicting the stable stress–strain responses of materials in engineering application. Comparisons showed that the modified model can reflect the effect of nonproportional cyclic hardening well.

36 MATERIALS SCIENCE↗

A Study of Tensile Flow and Work-Hardening Behavior of Alloy 617

The simple power relationship σ = Κε{sub p}{sup n} satisfactorily expresses the tensile flow behavior of many metals and alloys in their uniform plastic strain regime. However, many FCC materials with low stacking fault energy have opposed such power law relationship. Alloy 617, an age-hardenable Ni-based superalloy is also observed not to obey the simple power law relationship neither in its solution-treated nor in its aged conditions. Various flow relationships were used to obtain the best fit for the tensile data, and different relationships were identified for the different aged conditions. The work-hardening rate (θ) demonstrates three distinct regions for all aged conditions, and there is an obvious change in the trend of θ versus σ. In the initial portion, θ decreases rapidly followed by a gradual increase in the second stage and again a decrease in its third stage is perceived in the Alloy 617. These three-stage characteristics are attributed to a commonly known precipitate, γ′: Ni{sub 3}(Ti, Al) which evolves during aging treatment and well recognized under transmission electron microscopy (TEM) observation. TEM results also reveal a slight degree of coarsening in γ′ over aging. The tensile flow and the work-hardening behavior are well correlated with other microstructural evolution during the aging treatments.

36 MATERIALS SCIENCE↗

Semiempirical Formulae for Mechanical Properties Controlled by Strength and Ductility of Power-Law Hardening Metallic Materials

Some subordinate mechanical properties, such as the strain hardening exponent (n) and the fracture true stress (σ{sub f}), are not available in general material property handbooks, although they are important in choosing materials. This paper investigated the relations between the subordinate mechanical properties to the basic ones for power-law hardening materials. Our semiempirical analysis shows that, in uniaxial tensile experiment, the strain hardening exponent is controlled by the ratio of the yield strength (σ{sub s}) and the ultimate tensile strength (σ{sub b}), and the value also equals to the maximum uniform strain. The absolute calculation errors of n on various metal materials are approximately within ± 0.03. Physically, n expresses the ability of the strength rising from the yield strength to the ultimate tensile strength during uniform deformation; it may also denote the maximum ability of uniform deformation before necking. The fracture strength is controlled directly by n, σ{sub b} and the reduction in area (ψ{sub K}) in our concise expression. The relative errors of the fracture strength between the calculations and the measurements on metal materials are approximately within 20%. Results also indicate that the fracture true stress represents the increased stress during uniform deformation plus the concentrated stress caused by necking.

36 MATERIALS SCIENCE↗

Influence of Dynamic Three Point Bending on the Work Hardening Capacity of T105Mn120 Manganese Steel

The paper analyzes work hardening behavior of T105Mn120 Hadfield steel under dynamic conditions. The specimens were investigated under two states: (a) untreated (as cast) and (b) solution treated to 1100 °C. Dynamic flexural behavior was examined by means of three-point-bending tests performed with a dynamic mechanical analyser (DMA), and structural analysis was done by x-ray diffraction, optical and scanning electron microscopy; DMA tests were performed under two variants: (a) temperature scans, between − 150 and 400 °C and (b) isothermal strain sweeps, up to 0.15% strain amplitudes. The former emphasized the critical temperatures of thermally induced reversible martensitic transformation and antiferromagnetic–paramagnetic phase transition, while the latter enabled to monitor the storage modulus increase due to the work hardening caused by dynamic bending. Strain sweeps tests revealed the effects of both dynamic bending frequency and number of cycles. The largest work hardening effect, obtained after five strain sweep cycles applied at the frequency of 5 Hz, was associated with the finest distribution of precipitated carbides, observed by differential scanning calorimetry and the formation of slip micro-bands, illustrated on OM micrographs and SEM energy dispersion spectroscopy maps.

36 MATERIALS SCIENCE↗

Modeling the Work Hardening Behavior of High-Manganese Steels

The work hardening of a series of high-manganese steels with various chemical compositions (manganese contents of 18–30 wt.% and carbon contents of 0.06–1.2 wt.%) and deformation products (mechanical twins and/or ε-martensite) was modeled using a physics-based model. The model comprised the contributions of dislocation glide and phase transition (mechanical twinning and/or ε-martensite formation) kinetics to the overall work hardening rate. The model parameters included the physical characteristics of the steels such as the stacking fault energy as well as the microstructural features such as the volume fraction of the deformation products. A key point of the model was that it is globally applicable for all high-manganese steels—including twinning-induced plasticity and/or transformation-induced plasticity steels—instead of being limited to a specific category of these steels. A good agreement was found between the predicted and observed work hardening for all the experimental alloys in this study as well as several high-manganese steels in the literature.

36 MATERIALS SCIENCE↗

Understanding the setting and hardening process of wollastonite-based brushite cement. Part 2: Influence of the boron and aluminum concentrations in the mixing solution

The mixing solution of wollastonite-based brushite cement is a phosphoric acid solution containing metallic cations and borax. This work complements a previous study devoted to the influence of the H{sub 3}PO{sub 4} concentration, Ca/P and liquid-to-solid (l/s) ratios on the setting and hardening process of the binder by providing new insight into the role of aluminum and boron. Boron retards the setting and decreases the heat released during the process. It also contributes to reduce the macroporosity of the hardened material but yields to poor compressive strength. With aluminum in the mixing solution, the mechanical properties are greatly improved thanks to the precipitation of an amorphous aluminophosphate which increases the density of the cement matrix. But aluminum alone leads to fast setting. A joint addition of boron and aluminum to the mixing solution makes it possible to get a material with optimized properties both in fresh and hardened states.

36 MATERIALS SCIENCE↗

Correction of Specimen Strain Measurement in Kolsky Tension Bar Experiments on Work-Hardening Materials

Cylindrical dog-bone (or dumbbell) shaped samples have become a common design for dynamic tensile tests of ductile materials with a Kolsky tension bar. When a direct measurement of displacement between the bar ends is used to reveal the specimen strain, the actual strain in the specimen gage section is overestimated due to strain in the specimen shoulder and needs to be corrected. The currently available correction method works well for elastic-perfectly plastic materials but may not be applicable to materials that exhibit significant work-hardening behavior. Here, we developed a new specimen strain correction method for materials possessing an elastic-plastic with linear work-hardening stress-strain response. A Kolsky tension bar test of a Fe-49Co-2V alloy (known by trade names Hiperco and Permendur) was used to demonstrate the new specimen strain correction method. This new correction method was also used to correct specimen strains in Kolsky tension bar experiments on two other materials: 4140 alloy, and 304L-VAR stainless steel, which had different work-hardening behavior.

36 MATERIALS SCIENCE↗

Deciphering the multiple deformation mechanisms responsible for sustained work hardening in a FeCrCoNi medium entropy alloy

Two important and desirable properties of materials for most structural applications are high tensile strength and ductility, which typically require high work hardening to delay necking. Here, in this work, we designed and tensile tested a face-centered cubic (fcc) Fe-Cr-Co-Ni medium-entropy alloy in which multiple deformation mechanisms are triggered during tensile loading at different temperatures to induce sustained work hardening. Our strategy involved control of the relative stabilities of the fcc, hcp (hexagonal close-packed), and bcc (body-centered cubic) phases in this quaternary system via high-throughput thermodynamic calculations. This alloy not only exhibits extensive deformation-induced nanotwinning at room temperature, but also displays a two-step sequential phase transformation [γ (fcc) → ε (hcp) martensite → α’ (bcc) martensite] at 77 K, which contrasts with the single-step phase transformation [γ → ε martensite] observed in many other fcc high/medium entropy alloys with a low stacking fault energy. The sequence of phase transformation at 77K was supported by first-principles density functional theory calculations. This work provides new templates for the design of alloys capable of multiple deformation mechanisms for sustained work hardening.

36 MATERIALS SCIENCE↗

Link statistics of dislocation network during strain hardening

Dislocations are line defects in crystals that multiply and self-organize into a complex network during strain hardening. The length of dislocation links, connecting neighboring nodes within this network, contains crucial information about the evolving dislocation microstructure. By analyzing data from Discrete Dislocation Dynamics (DDD) simulations in face-centered cubic (fcc) Cu, we characterize the statistical distribution of link lengths of dislocation networks during strain hardening on individual slip systems. Here, our analysis reveals that link lengths on active slip systems follow a double-exponential distribution, while those on inactive slip systems conform to a single-exponential distribution. The distinctive long tail observed in the double-exponential distribution is attributed to the stress-induced bowing out of long links on active slip systems, a feature that disappears upon removal of the applied stress. We further demonstrate that both observed link length distributions can be explained by extending a one-dimensional Poisson process to include different growth functions. Specifically, the double-exponential distribution emerges when the growth rate for links exceeding a critical length becomes super-linear, which aligns with the physical phenomenon of long links bowing out under stress. This work advances our understanding of dislocation microstructure evolution during strain hardening and elucidates the underlying physical mechanisms governing its formation.

Crystal plasticity↗

Neutron energy spectrum influence on irradiation hardening and microstructural development of tungsten

We performed a neutron irradiation to single crystal pure tungsten in the mixed spectrum High Flux Isotope Reactor (HFIR). In order to investigate the influences of neutron energy spectrum, the microstructure and irradiation hardening were compared with previous data obtained from the irradiation campaigns in the mixed spectrum Japan Material Testing Reactor (JMTR) and the sodium-cooled fast reactor Joyo. The irradiation temperatures were in the range of ~90–~800 °C and fast neutron fluences were 0.02–9.00 × 10 25 n/m 2 (E > 0.1 MeV). Post irradiation evaluation included Vickers hardness measurements and transmission electron microscopy. Moreover, the hardness and microstructure changes exhibited a clear dependence on the neutron energy spectrum. The hardness appeared to increase with increasing thermal neutron flux when fast fluence exceeds 1 × 10 25 n/m 2 (E > 0.1 MeV). Finally, irradiation induced precipitates considered to be χ- and σ-phases were observed in samples irradiated to >1 × 10 25 n/m 2 (E > 0.1 MeV), which were pronounced at high dose and due to the very high thermal neutron flux of HFIR. Although the irradiation hardening mainly caused by defects clusters in a low dose regime, the transmutation-induced precipitation appeared to impose additional significant hardening of the tungsten.

36 MATERIALS SCIENCE↗

Phase decomposition in an Fe-40 at.% Cr alloy after isothermal aging and its effect on hardening

The phase decomposition process of an Fe-40 at.% Cr alloy was studied after isothermal aging at 475 and 500 deg. C using a high-resolution transmission electron microscope, as well as hardness measurements. High-resolution transmission electron microscope observations showed that the hardening behavior is associated with the formation of the nanometric coherent decomposed Cr-rich and Fe-rich phases with irregular shape and interconnected as expected for a spinodally-decomposed alloy. As the aging progressed, coherent rounded Cr-rich phase precipitates were observed in the Fe-rich phase matrix. The coarsening process of the Cr-rich phase was observed for aging times up to 750 h. Nevertheless, no decrease in hardness with time was observed because of the nanometric size of the Cr-rich phase, less than 10 nm. Aging hardening was higher at 500 deg. C because of the higher decomposition kinetics. - Research Highlights: {yields} Spinodally-decomposed phases showed an interconnected and irregular shape in aged Fe-Cr alloy. {yields} Further aging promoted the formation of nanometric coherent rounded Cr-rich precipitates. {yields} Nanometric Cr-rich phases are responsible for the age hardening. {yields} Coarsening process of these nanometric Cr-rich precipitates caused no decrease in hardness.

36 MATERIALS SCIENCE↗

Effect of short-range order on microstructure, texture and strain hardening of cold drawn Cu-10 at.%Mn alloy

Highlights: • Excluding the effect of stacking fault energy, short-range order effect is discussed solely. • Short-range order is beneficial for twinning and slip planarity. • Short-range order promotes the formation of <111> fiber texture. • Strain hardening improving by short-range order. - Abstract: The aim of the present study is to investigate the effect of short-range order (SRO) on the microstructural evolution and mechanical property of Cu-10 at.%Mn alloy during cold drawing deformation. Characterization of the cold drawn Cu-10 at.%Mn alloy samples were performed using transmission electron microscope (TEM) and electron back scattering diffraction (EBSD), and their hardness were also tested. The results show that SRO is beneficial for both twinning and the transition of dislocation glide from wavy slip to planar slip at the low strains. At the high strains, the wavy slip generates due to the destruction of SRO. SRO increases the volume fraction of <111> texture component and the critical strain threshold. Moreover, the presence of SRO significantly improves strain hardening by combining the effects of dislocation, deformation twinning and texture hardening, which results in a significant increase of hardness.

36 MATERIALS SCIENCE↗

Optimization of hot workability and microstructure control in a 12Cr-10Ni precipitation hardenable stainless steel: An approach using processing maps

Highlights: • Deformation processing map was developed for a 12Cr10Ni precipitation hardenable martensitic stainless steel and optimized hot working parameters were suggested to obtain defect free products. • The ‘stable’ domain of the processing maps were correlated to the dynamic recrystallization in the austenite phase and further confirmed by detailed microstructural investigations. • The DRx domain showed a refinement of the martensite packet size and of the prior transformation austenite grain size, essential to obtain the desired mechanical properties. - Abstract: Optimization of hot working parameters and corresponding microstructure control were explored in a 12Cr-10Ni precipitation hardenable martensitic stainless steel. From hot compression tests, 1073–1373 K (800°–1100 °C) and five (0.001–10 s{sup −1}) different strain rates, processing maps were developed, and various domains of microstructure evolution (in the austenite phase) were identified. The stable domain of the processing maps appeared to indicate dynamic recrystallization (DRx) in the austenite phase: as evident by the appearance of inflection point in the strain hardening rate versus flow stress plots. The suspected DRx domain was further confirmed by detailed microstructural investigations of the respective water-quenched specimens. The DRx domain showed a refinement of the martensite packet size and of the prior transformation austenite grain size. The later was shown with optical microstructure and reconstructed (modelled) microtexture data of the prior austenite grains. Additionally, the DRx domain showed a significant difference in activation energy as estimated from appropriate constitutive modelling.

36 MATERIALS SCIENCE↗

Effects of Zn addition on the age hardening behavior and precipitation evolution of an Al-Mg-Si-Cu alloy

Highlights: • The Zn addition enhances the age hardening response of Al-Mg-Si-Cu alloy. • The major of Zn remains in the Al matrix during artificial aging at 170 °C. • The Zn addition prompts the formation of solute clusters, GP zones and β″ precipitates. - Abstract: The effects of Zn on the age hardening behavior and corresponding microstructure of an Al-0.9Mg-0.8Si-0.2Cu (wt%) alloy were investigated by hardness testing, transmission electron microscopy (TEM) and three-dimensional atom probe (3DAP). During aging for up to 8 h at 170 °C (peak hardness condition), the addition of Zn does not alter the precipitation sequence of the Al-Mg-Si alloy, which can be expressed as: supersaturated solid solution → solute clusters → GP zones → β″. The Zn does not significantly partition into clusters or precipitates, and the majority of Zn remains in the Al matrix, prompting the formation of solute clusters during the early stage of aging and subsequently stimulating the transformation from solute clusters to GP zones to β″ precipitates. The characterization of precipitation evolution caused by Zn addition correlates well with the observed enhanced age hardening response.

36 MATERIALS SCIENCE↗

A mechanism-based quantitative multi-scale framework for investigating irradiation hardening of tungsten at low temperature

We present the development and validation of a mechanism-based multi-scale modeling framework to quantitatively link the irradiation defect evolution kinetics at the microscopic scale to the macroscopic yield strength and flow stress evolution of tungsten irradiated at low temperature (0.08 < T/T m < 0.18, where T m is the melting point and is equal to 3673 K). The mechanism-based strength model, proposed as the superposition of thermal softening and modified dispersed barrier hardening, is developed to understand the underlying strengthening mechanisms. The thermal softening exponent as defined in the Johnson-Cook model is obtained by fitting unirradiated yield strength at different temperatures. A set of irradiation-induced defect kinetics equations with the thermodynamics parameters derived from the atomic calculations reported in the literature is used to determine the densities and sizes of defect clusters at the meso-scale, and the predicted irradiation damage characteristics are in reasonable quantitative agreement with experimental data from literature. The effects of irradiation condition (temperature and irradiation dose) and test temperature on yield strength are quantitatively predicted and compared with experimental measurements from the literature. Here, the predicted irradiation hardening and strain hardening are compared with experimental data as model validation.

36 MATERIALS SCIENCE↗

Self-equilibrated backstresses induce compensation between hardening and softening: Micromechanical and microstructural features

For crystal plasticity formulation neglecting the strain gradients at the dislocation scale, backstresses are necessary to satisfy the mesoscopic stress equilibrium and strain compatibility requirements. Backstresses in a material point and those between neighboring points are treated separately. Physically backstresses can dynamically induce either hardening or softening effects to adjust the dislocation hardening of slip systems, whereas the sum of the stresses resulting in backstresses in the representative volume element (RVE) is zero. Backstress hardening suppresses certain slip activities, while backstress softening triggers excess dislocations. A two-phase brass is studied. Backstresses make the hard phase deform smaller and the soft phase deform more than those without employing backstresses in a model. In the former, more homogeneous lattice strain and higher yield stress are obtained. Backstress has limited effects on the evolution of the critical resolved shear stress and crystallographic texture. Furthermore, it is a major cause of the banded structures featuring sharp crystallographic contrasts which are not parallel to the slip planes. Tests indicate that backstress induces a serrated behavior at the early stages of deformation and induces the geometrically necessary bands (GNBs), which are parallel to the macroscopic axes.

36 MATERIALS SCIENCE↗