Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H 2 O”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A Monolithic Artificial Leaf for Solar Methanol Production from CO 2 and H 2 O

Methanol, an important liquid fuel and chemical feedstock, has yet to be produced using solar energy, H 2 O, and CO 2 as sole inputs in a standalone device. Here, this study directly addresses this longstanding challenge through presenting the first demonstration of unbiased solar methanol production from CO 2 and H 2 O with a monolithic artificial leaf design, surpassing the previous best energy efficiency in solar alcohol production by at least 1 order of magnitude. We first develop a new generation of photocathodes based on Si micropillar arrays and a cobalt tetraaminophthalocyanine molecular catalyst. By integrating a C 60 interlayer that facilitates unidirectional electron transfer through the semiconductor/catalyst interface, we realize a photovoltage of 500 mV, one of the highest recorded for single-junction Si-based photoelectrodes in aqueous CO 2 reduction, as well as unprecedented methanol formation with a Faradaic efficiency of 30% and a partial current density of 6.3 mA cm –2 . We further integrate the photocathode with a multijunction perovskite photovoltaic minimodule to afford a standalone solar fuel system, which demonstrates a light-to-methanol conversion efficiency of 0.8%, 32 times higher than the present record in light-to-alcohol conversion with an artificial leaf.

alcohols↗
DOE OSTI2020

Threshold Collision-Induced Dissociation of Hydrated Thorium(IV) Trihydroxide Cation: Experimental and Theoretical Investigation of the Binding Energies for Th(OH) 3 + (H 2 O) n Complexes ( n = 1–4)

Threshold collision-induced dissociation of Th(OH) 3 + (H 2 O) n Complexes ( n = 1–4) with xenon was performed using a guided ion beam tandem mass spectrometer. The primary dissociation pathway for all complexes is a loss of a single water molecule followed by the sequential loss of additional water molecules at higher collision energies. Here, the data were analyzed using a statistical model after accounting for lifetime effects and reactant internal and kinetic energy distributions to obtain 0 K bond dissociation energies (BDEs). These were also converted using rigid rotor/harmonic oscillator approximations to yield thermodynamic values at room temperature. The 0 K BDEs of H 2 O ligands to Th(OH) 3 + (IV) are experimentally determined for the first time as 106 ± 6, 89 ± 6, 76 ± 4, and 51 ± 4 kJ/mol for the first, second, third, and fourth water ligand added. These values agree reasonably well with values calculated at the B3LYP, B3PW91, and PBE0 levels of theory with aug-cc-pVQZ basis sets, whereas B3LYP-GD3BJ, MP2, and CCSD(T) single point energies with (without) counterpoise corrections systematically overestimate the bond energies by about 15 (20), 19 (25), and (18) kJ/mol, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pressure-driven symmetry transitions in dense H 2 O ice

X-ray diffraction and Raman spectroscopy of H 2 O (ice) structures are measured under static compression in combination with grain normalizing heat treatment via direct laser heating. Here, we report the transition from cubic ice-VII to a structure of tetragonal symmetry, ice-VII t at 5.1 ± 0.5 GPa. This is succeeded by the H-bond symmetrization transition occurring at a pressure of 30.9 ± 3 GPa. Both experimental observations are supported by simulated Raman spectra from density-functional theory quantum calculations. The transition to H-bond symmetrization is evidenced by the reversible emergence of its characteristic Raman mode and a 2.5-fold increase in bulk modulus, implying a significant increase in bonding strength.

58 GEOSCIENCES↗
DOE OSTI2025

Exceptional NH 3 Detection by Cu(cyhdc) MOF Sensor Due to H 2 O Coadsorption

Metal–organic framework (MOF)-based electrical impedance sensors are a growing class of sensors that show utility in the detection of environmentally toxic gases. Detection of trace NH 3 has been particularly difficult to design due to the low electrical response of NH 3 . However, this has been circumvented by judiciously selecting a MOF that has enhanced electrical response to NH 3 due to coadsorption with predominant atmospheric gases such as water. Herein, an MOF Cu(cyhdc) based sensor has been successfully demonstrated for the enhanced detection of environmentally toxic NH 3 gas. The sensor shows a change in impedance when it is exposed to 5 ppm of NH 3 . At 20 °C, >30% relative humidity (RH) is necessary to elicit a change, with the response increasing with RH and reaching 3170× at 92% RH, producing the largest published response to NH 3 for a MOF direct electrical sensor. In the absence of water, no change is observed toward 5 ppm of NH 3 over 20–50 °C. Here, this electrical response is largely driven by huge decreases in the imaginary component of the impedance, attributed to increased capacitance at the surface of the MOF crystallites upon NH 3 and H 2 O coadsorption. Complementary structural and microstructural characterization proves that the Cu(cyhdc) crystalline structure and morphology remain intact under trace NH 3 and/or H 2 O adsorption. Despite extremely low NH 3 , loadings seen in TGA, XPS, and FT-IR confirm NH 3 and H 2 O adsorption, and changes to the metal-carboxylate IR peak positions are observed upon NH 3 adsorption. Concentrated primarily at the outer surfaces of the MOF crystallites, this NH 3 and H 2 O coadsorption effectively increases the surface capacitance across the Cu(cyhdc) powder and enables direct electrical detection of trace NH 3 . Together, these results demonstrate how coadsorption of specific molecules (H 2 O) can be used to enable the electrical detection of trace toxic gases that would otherwise not have produced a MOF sensor response.

ammonia↗
DOE OSTI2024

Isotope effects in supercooled H 2 O and D 2 O and a corresponding-states-like rescaling of the temperature and pressure

Water shows anomalous properties that are enhanced upon supercooling. The unusual behavior is observed in both H 2 O and D 2 O, however, with different temperature dependences for the two isotopes. It is often noted that comparing the properties of the isotopes at two different temperatures (i.e., a temperature shift) approximately accounts for many of the observations—with a temperature shift of 7.2 K in the temperature of maximum density being the most well-known example. However, the physical justification for such a shift is unclear. Motivated by recent work demonstrating a “corresponding-states-like” rescaling for water properties in three classical water models that all exhibit a liquid–liquid transition and critical point, the applicability of this approach for reconciling the differences in the temperature- and pressure-dependent thermodynamic properties of H 2 O and D 2 O is investigated here. Utilizing previously published data and equations-of-state for H 2 O and D 2 O, we show that the available data and models for these isotopes are consistent with such a low temperature correspondence. These observations provide support for the hypothesis that a liquid–liquid critical point, which is predicted to occur at low temperatures and high pressures, is the origin of many of water’s anomalies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tunable magnetic order in low-symmetry SeO 3 ligand linked TM 3 (SeO 3 ) 3 H 2 O ( TM =Mn , Co, and Ni) compounds

The ability to design crystal lattices with specific sublattice geometries has long been sought after especially in the context of harnessing magnetic frustration to elicit emergent physics. One approach which has seen some success recently is to design magnetic sublattices chemically through the use of nonmagnetic linker ligands as scaffolding for the magnetic ions. In this work we report the magnetic properties of one such family of materials, the transition metal (TM) selenite hydrates with chemical formula TM 3 (SeO 3 ) 3 H 2 O. These materials link highly distorted TMO 6 octahedra via nonmagnetic [SeO 3 ] 2+ linkers. Studying members with TM = Mn, Co, and Ni we use magnetic susceptibility and neutron powder diffraction to identify antiferromagnetic order in all three compounds with moderate frustration indexes. A comparison of the magnetic structures suggests that while the overall structure of the SeO 3 scaffolding remains unchanged the TM effects changes in the magnetic properties through tuning the internal bonding parameters and the single-ion physics. Changing from Mn to Co is found to be particularly consequential manifesting changes in both the ordered-moment direction and in the direction of the ordering vector. Field-dependent measurements of the susceptibility and heat capacity reveal metamagnetic transitions in both Mn 3 (SeO 3 ) 3 H 2 O and Co 3 (SeO 3 ) 3 H 2 O indicating nearby magnetic ground states accessible under relatively small applied fields. Density functional theory calculations broadly confirm these results, showing both a sensitivity of the magnetic structure to the TM and its local environment. Although no spin liquid behavior is achieved, these results suggest the fruitfulness of such synthesis philosophies and encourage future work to engender higher frustration in these materials via doping, field, pressure, or larger linker ligands.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multiple selectivity-determining mechanisms of H 2 O 2 formation in iron porphyrin-catalysed oxygen reduction

Multiple H 2 O 2 -forming mechanisms are accessible in Fe(porphyrin)-catalysed oxygen reduction, a key reaction in both fuel cell technologies and oxygen-utilizing enzymes. Our kinetic analysis reveals that the porphyrin secondary structure dictates the pathway for H 2 O 2 formation. This approach is generalizable to other electrocatalytic processes and provides insight into the selectivity-determining steps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomic-Scale Dynamic Interaction of H 2 O Molecules with Cu Surface

Atomic-scale interaction of water vapor with metal surfaces beyond surface adsorption under technologically relevant conditions remains mostly unexplored. Using aberration-corrected environmental transmission electron microscopy, we reveal the dynamic surface activation of Cu by H 2 O at elevated temperature and pressure. In this study, we find a structural transition from flat to corrugated surface for the Cu(011) under low water-vapor pressure. Increasing the water-vapor pressure leads to the surface reaction of Cu with dissociated H 2 O, resulting in the formation of a metastable “bilayer” Cu-O-H phase. Corroborated by density functional theory and ab initio molecular dynamics calculations, the cooperative O and OH interaction with Cu is responsible for the formation and subsurface propagation of this phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The homogeneous mixing of MgO and H 2 O at extreme conditions

Investigating water worlds presents a unique opportunity to understand the fundamental processes of planetary formation and evolution. One key aspect is characterizing the interactions between water and rock under the pressures and temperatures present within these worlds. Investigating the conditions for the homogeneous mixing of these materials is imperative to characterizing bulk properties and evolution of water-rich exoplanets. Here, in this study, we use density functional molecular dynamics simulations to study MgO-H 2 O mixtures at high pressure–temperature conditions where H 2 O occurs in solid, superionic, or liquid form. MgO, the representative rocky material, can be either solid or liquid. We start from 500 K at 120 GPa, increasing the temperature step by step up to 8000 K. By inspection, we determine the temperature at which MgO-HO homogeneously mix in our simulations. At 6000 K and 174 GPa is when we find the system to homogeneously mix. This heat-until-it-mixes approach provides us with an upper bound on the temperature for the mixing of MgO and H 2 O. We find that homogeneous mixing occurs at sufficiently low temperatures to be relevant for the collisional growth of a water-rich planet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A General Binary Isotherm Model for Amines Interacting with CO 2 and H 2 O

CO 2 capture by primary or secondary amines has been of great research interests for a century because of its industrial importance. Interest has grown even more, because of the need to eliminate the CO 2 emissions that drive global warming. Experimental evidence shows that CO 2 sorption in primary or secondary amines is accompanied by co-absorption of H 2 O. A quantitative analysis of such CO 2 -H 2 O co-absorption behavior is important for practical process design and theoretical understanding. Even though there is almost an experimental consensus that water enhances CO 2 uptake capacity, an analytic model to explain this phenomenon is not well established. Instead, some empirical models such as the Toth model are used to describe the isotherm without accounting for the presence of water. Recently, we have demonstrated that the isotherm equation of CO 2 sorption into strong-base anion exchange materials with quaternary ammonium can be derived from that of strong-base aqueous alkaline solutions by correcting for the drastic change in water activity and by including an appropriate parameterization of the water activity terms. In this paper, we generalize this model from quaternary ammonium to primary, secondary and tertiary amines either in solutions or as functional groups in polymer resins. For primary, secondary and tertiary amines, the isotherm equation can be derived by extending that of a weak-base aqueous alkaline solution such as aqueous ammonia. The model has been validated using experimental data of aqueous ammonia in literature. Furthermore, this general model even includes quaternary ammonium as a special limit. Hence, this general model offers a platform that can treat the isotherms of solid amines, aqueous amines and aqueous alkaline solutions in a unified way.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tunable Catalytic Performance of Palladium Nanoparticles for H 2 O 2 Direct Synthesis via Surface-Bound Ligands

There is a critical need for sustainable routes to produce hydrogen peroxide, H 2 O 2 . A promising approach involves direct synthesis from molecular hydrogen and oxygen at (sub)ambient temperatures using unmodified supported Pd catalysts, which are limited by low selectivities. Controlling the environment of Pd active sites via surface ligands is shown to enhance selectivity. Trends among a myriad of surface ligands (i.e., phosphines, thiols, weakly bound molecules) suggest that those containing H-bonding groups lead to the highest H 2 O 2 production, potentially by affecting reaction energetics via H-bonding with key intermediates. These insights lay the groundwork for ligand design to achieve the optimal catalyst performance for H 2 O 2 synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Near-MHz temperature and H 2 O measurements in post-detonation fireballs of 25 g hemispherical explosives using scanned-wavelength-modulation spectroscopy

A laser absorption spectroscopy diagnostic integrated within a hardened optical probe was used to measure temperature and water mole fraction at 500 kHz in post-detonation fireballs of explosives. In the experiments, an exploding-bridgewire detonator initiated a 25 g hemisphere of explosive (N5 or PETN). This produced a hemispherical fireball that traveled radially towards a hardened measurement probe. The probe contained a pressure transducer and optical equipment to pitch fiber-coupled laser light across a 12.6 cm gap onto a detector. Tunable diode lasers emitting near 7185.6 and 6806 c m − <#comment/> 1 were used to measure the absorbance spectrum of H 2 O utilizing peak-picking scanned-wavelength-modulation spectroscopy with a scan frequency of 500 kHz and modulation frequencies of 35 and 45.5 MHz, respectively. This enabled measurements of temperature and X H 2 O in the shock-heated air and trailing fireball at 500 kHz. Time histories of pressure, temperature, and H 2 O mole fraction were acquired at different standoff distances to quantify how the fireball evolved in space and time as well as to compare measured quantities between PETN and N5 fireballs. The standard deviation of temperature and X H 2 O during one representative test were found to be 17 K (1.3%) and 0.011 (5%), respectively. These measurements demonstrate this diagnostic’s ability to provide rapid and reliable measurements in harsh, highly transient post-detonation environments produced by solid explosives.

Schwartz, Charles J.↗
DOE OSTI2025

Rb 4 CuSb 2 Cl 11 and Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O: Wide Band Gap 0D Metal Halide Semiconductors

Herein, we report the discovery, structural and photophysical characterization of a new zero-dimensional (0D) lead-free all-inorganic halide, Rb 4 CuSb 2 Cl 11 , which adopts a new structure type. Single-crystal X-ray diffraction (SCXRD) shows that the structure consists of isolated, distorted seesaw [SbCl 4 ] − and trigonal planar [CuCl 3 ] 2− units, separated by Rb + cations that provide charge balance. Optoelectronic measurements and density functional theory (DFT) calculations indicate an indirect band gap of 2.89 eV, making it a candidate for wide-bandgap optoelectronic applications. Electrical resistivity was measured at 1.29 × 10 10 Ω·cm, and the trap-state density (n trap ) was found to be 7.44 × 10 10 cm −3 . Attempts to synthesize substitution analogs of Rb 4 CuSb 2 Cl 11 led to the synthesis of Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O, which was erroneously reported as Rb 2 SbCl 5 O in a previous study. Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O adopts a vacancyordered perovskite structure and exhibits broad-band yellow emission under UV excitation. The measured photoluminescence quantum yield (PLQY) for Rb 2 In 0.91 (0.2)Sb 0.09 Cl 5 ·H 2 O is 18.2%. These findings add to the growing class of quaternary metal halides with multiple cation and anion compositions, expanding the chemical phase space for the discovery of new materials with functional properties.

Crystal structure↗
DOE OSTI2023

Unimolecular Reactions of E -Glycolaldehyde Oxide and Its Reactions with One and Two Water Molecules

The kinetics of Criegee intermediates are important for atmospheric modeling. However, the quantitative kinetics of Criegee intermediates are still very limited, especially for those with hydroxy groups. Here, we calculate rate constants for the unimolecular reaction of E-glycolaldehyde oxide [E-hydroxyethanal oxide, E-(CH 2 OH)CHOO], for its reactions with H 2 O and (H 2 O) 2 , and for the reaction of the E-(CH 2 OH)CHOO…H 2 O complex with H 2 O. For the highest level of electronic structure, we use W3X-L//CCSD(T)-F12a/cc-pVDZ-F12 for the unimolecular reaction and the reaction with water and W3X-L//DF-CCSD(T)-F12b/jun-cc-pVDZ for the reaction with 2 water molecules. For the dynamics, we use a dual-level strategy that combines conventional transition state theory with the highest level of electronic structure and multistructural canonical variational transition state theory with small-curvature tunneling with a validated density functional for the electronic structure. This dynamical treatment includes high-frequency anharmonicity, torsional anharmonicity, recrossing effects, and tunneling. We find that the unimolecular reaction of E-(CH 2 OH)CHOO depends on both temperature and pressure. The calculated results show that E-(CH 2 OH)CHOO…H 2 O + H 2 O is the dominant entrance channel, while previous investigations only considered Criegee intermediates + (H 2 O) 2 . In addition, we find that the atmospheric lifetime of E-(CH 2 OH)CHOO with respect to 2 water molecules is particularly short with a value of 1.71 × 10 –6 s at 0 km, which is about 2 orders of magnitude shorter than those usually assumed for Criegee intermediate reactions with water dimer. We also find that the OH group in E-(CH 2 OH)CHOO enhances its reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Operando identification of site-dependent water oxidation activity on ruthenium dioxide single-crystal surfaces

Understanding the nature of active sites is central to controlling (electro)catalytic activity. Here we employed surface X-ray scattering coupled with density functional theory and surface-enhanced infrared absorption spectroscopy to examine the oxygen evolution reaction on RuO 2 surfaces as a function of voltage. At 1.5 V RHE , our results suggest that there is an –OO group on the coordinatively unsaturated ruthenium (Ru CUS ) site of the (100) surface (and similarly for (110)), but adsorbed oxygen on the Ru CUS site of (101). Density functional theory results indicate that the removal of –OO from the Ru CUS site, which is stabilized by a hydrogen bond to a neighbouring –OH (–OO–H), could be the rate-determining step for (100) (similarly for (110)), where its reduced binding on (100) increased activity. A further reduction in binding energy on the Ru CUS site of (101) resulted in a different rate-determining step (–O + H 2 O – (H + + e - ) → –OO–H) and decreased activity. Our study provides molecular details on the active sites, and the influence of their local coordination environment on activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Manifesting Direction-Specific Complexation in [HFIP –H ·H 2 O 2 ] – : Exclusive Formation of a High-Lying Conformation

Size-selective, negative ion photoelectron spectroscopy in conjunction with quantum chemical calculations is employed to investigate the geometric and electronic structures of a protype system in catalytic olefin epoxidation research, i.e., deprotonated hexafluoroisopropanol ([HFIP -H ] - ) complexed with hydrogen peroxide (H 2 O 2 ). Spectral assignments and molecular electrostatic surface analyses unveil a surprising prevalent existence of a high-lying isomer with asymmetric dual hydrogenbonding configuration that is preferably formed driven by influential directionspecific electrostatic interactions upon H 2 O 2 approaching [HFIP -H ] - anion. Subsequent inspections of molecular orbitals, charge and spin density distributions indicate the occurrence of partial charge transfer from [HFIP -H ] - to H 2 O 2 upon hydrogen bonding interactions. Accompanying with electron detachment, a proton transfer occurs to form the neutral complex of [HFIP•HOO • ] structure. In conclusion, this work conspicuously illustrates the importance of directionality encoded in intermolecular interactions involving asymmetric and complex molecules, while the produced hydroperoxyl radical HOO • offers a possible new pathway in olefin epoxidation chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Porous and Water Stable 2D Hybrid Metal Halide with Broad Light Emission and Selective H 2 O Vapor Sorption

Abstract In this work we report a strategy for generating porosity in hybrid metal halide materials using molecular cages that serve as both structure‐directing agents and counter‐cations. Reaction of the [2.2.2] cryptand (DHS) linker with Pb II in acidic media gave rise to the first porous and water‐stable 2D metal halide semiconductor (DHS) 2 Pb 5 Br 14 . The corresponding material is stable in water for a year, while gas and vapor‐sorption studies revealed that it can selectively and reversibly adsorb H 2 O and D 2 O at room temperature (RT). Solid‐state NMR measurements and DFT calculations verified the incorporation of H 2 O and D 2 O in the organic linker cavities and shed light on their molecular configuration. In addition to porosity, the material exhibits broad light emission centered at 617 nm with a full width at half‐maximum (FWHM) of 284 nm (0.96 eV). The recorded water stability is unparalleled for hybrid metal halide and perovskite materials, while the generation of porosity opens new pathways towards unexplored applications ( e.g . solid‐state batteries) for this class of hybrid semiconductors.

Azmy, Ali↗