Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GLOBAL ASPECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Climate Change Mitigation Potential of Wind Energy

Global wind resources greatly exceed current electricity demand and the levelized cost of energy from wind turbines has shown precipitous declines. Accordingly, the installed capacity of wind turbines grew at an annualized rate of about 14% during the last two decades and wind turbines now provide ~6–7% of the global electricity supply. This renewable electricity generation source is thus already playing a role in reducing greenhouse gas emissions from the energy sector. Here we document trends within the industry, examine projections of future installed capacity increases and compute the associated climate change mitigation potential at the global and regional levels. Key countries (the USA, UK and China) and regions (e.g., EU27) have developed ambitious plans to expand wind energy penetration as core aspects of their net-zero emissions strategies. The projected climate change mitigation from wind energy by 2100 ranges from 0.3–0.8 °C depending on the precise socio-economic pathway and wind energy expansion scenario followed. The rapid expansion of annual increments to wind energy installed capacity by approximately two times current rates can greatly delay the passing of the 2 °C warming threshold relative to pre-industrial levels. To achieve the required expansion of this cost-effective, low-carbon energy source, there is a need for electrification of the energy system and for expansion of manufacturing and installation capacity.

17 WIND ENERGY↗
DOE OSTI2022

Conservation of Dry Air, Water, and Energy in CAM and Its Potential Impact on Tropical Rainfall

Abstract For the Community Atmosphere Model version 6 (CAM6), an adjustment is needed to conserve dry air mass. This adjustment exposes an inconsistency in how CAM6’s energy budget incorporates water—in CAM6 water in the vapor phase has energy, but condensed phases of water do not. When water vapor condenses, only its latent energy is retained in the model, while its remaining internal, potential, and kinetic energy are lost. A global fixer is used in the default CAM6 model to maintain global energy conservation, but locally the energy tendency associated with water changing phase violates the divergence theorem. This error in energy tendency is intrinsically tied to the water vapor tendency, and reaches its highest values in regions of heavy rainfall, where the error can be as high as 40 W m −2 annually averaged. Several possible changes are outlined within this manuscript that would allow CAM6 to satisfy the divergence theorem locally. These fall into one of two categories: 1) modifying the surface flux to balance the local atmospheric energy tendency and 2) modifying the local atmospheric tendency to balance the surface plus top-of-atmosphere energy fluxes. To gauge which aspects of the simulated climate are most sensitive to this error, the simplest possible change—where condensed water still does not carry energy and a local energy fixer is used in place of the global one—is implemented within CAM6. Comparing this experiment with the default configuration of CAM6 reveals precipitation, particularly its variability, to be highly sensitive to the energy budget formulation. Significance Statement This study examines and explains spurious regional sources and sinks of energy in a widely used climate model. These energy errors result from not tracking energy associated with water after it transitions from the vapor phase to either liquid or ice. Instead, the model used a global fixer to offset the energy tendency related to the energy sources and sinks associated with condensed water species. We replace this global fixer with a local one to examine the model sensitivity to the regional energy error and find a large sensitivity in the simulated hydrologic cycle. This work suggests that the underlying thermodynamic assumptions in the model should be revisited to build confidence in the model-simulated regional-scale water and energy cycles.

Harrop, Bryce E.↗
DOE OSTI2021

Local time stepping for the shallow water equations in MPAS

In this work we assess the performance of a set of local time-stepping (LTS) schemes for the shallow water equations implemented in the Model for Prediction Across Scales (MPAS). The goal of LTS is to speed up the simulation by allowing different time-steps on different regions of the computational grid. The LTS schemes considered here were originally introduced by Hoang et al. (2019) [26], who laid out the mathematical foundation of the methods. Here, the authors take on the task of presenting a fast, efficient and scalable parallel implementation of these LTS methods on high performance computing machines, with the aim to provide a recipe for other climate modeling groups that may be interested in employing LTS algorithms in their codes. As a matter of fact, even if MPAS is our framework of choice, our approach is general enough and could be of interest to other groups beyond the MPAS community. Due to their nature, LTS methods possess an inherent load imbalance that needs to be carefully addressed in order to obtain efficient scalability. Even more important is the far from trivial task of computing the right-hand side terms only on specific LTS regions during the time-stepping procedure. An inefficient handling of this task causes a drastic decay of the CPU time performance, making the LTS algorithms practically of no use. The emphasis of the present work is therefore on the computational and parallel aspects of the LTS methods, whose proper treatment is crucial to make the methods run faster against existing strategies, such as for instance high-order explicit global time-stepping schemes. This is in fact the ultimate goal of using an LTS procedure and it is the one to which we direct all our optimization efforts.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Characterization of cellular oxidative stress response by stoichiometric redox proteomics

The thiol redox proteome refers to all proteins whose cysteine thiols are subjected to various redox-dependent posttranslational modifications (PTMs) including S-glutathionylation (SSG), S-nitrosylation (SNO), S-sulfenylation (SOH), and S-sulfhydration (SSH). These modifications can impact various aspects of protein function, including activity, binding, conformation, localization, and interactions with other molecules. It is highly desirable to have robust redox proteomics methods that can provide global, site-specific, and stoichiometric quantification of redox PTMs in order to elucidate the complex redox landscape and identify novel redox regulators in signaling and regulation. Mass spectrometry-based redox proteomics has emerged as the primary platform for enabling the broad characterization of thiol PTMs in cells and tissues. Herein we review recent advances in MS-based redox proteomics approaches for quantitative profiling of redox PTMs in cells and tissues at physiological or oxidative stress conditions and highlight some recent applications using these enabling techniques. Considering the relative maturity of available methods, a primary emphasis will be on two types of modifications: 1) total oxidation (i.e., all reversible thiol modifications), the level of which represents the overall redox state, and 2) S-glutathionylation, a major form of reversible thiol oxidation. We also discuss the significance of stoichiometric measurements of thiol PTMs as well as future perspectives towards a better understanding of cellular redox regulatory networks in cells and tissues.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

BeyondPlanck: VII. Bayesian estimation of gain and absolute calibration for cosmic microwave background experiments

We present a Bayesian calibration algorithm for cosmic microwave background (CMB) observations as implemented within the global end-to-end BEYONDPLANCK framework and applied to the Planck Low Frequency Instrument (LFI) data. Following the most recent Planck analysis, we decomposed the full time-dependent gain into a sum of three nearly orthogonal components: one absolute calibration term, common to all detectors, one time-independent term that can vary between detectors, and one time-dependent component that was allowed to vary between one-hour pointing periods. Each term was then sampled conditionally on all other parameters in the global signal model through Gibbs sampling. The absolute calibration is sampled using only the orbital dipole as a reference source, while the two relative gain components were sampled using the full sky signal, including the orbital and Solar CMB dipoles, CMB fluctuations, and foreground contributions. We discuss various aspects of the data that influence gain estimation, including the dipole-polarization quadrupole degeneracy and processing masks. Comparing our solution to previous pipelines, we find good agreement in general, with relative deviations of -0.67% (-0.84%) for 30 GHz, 0.12% (-0.04%) for 44 GHz and -0.03% (-0.64%) for 70 GHz, compared to Planck PR4 and Planck 2018, respectively. We note that the BEYONDPLANCK calibration was performed globally, which results in better inter-frequency consistency than previous estimates. Additionally, WMAP observations were used actively in the BEYONDPLANCK analysis, which both breaks internal degeneracies in the Planck data set and results in an overall better agreement with WMAP. Finally, we used a Wiener filtering approach to smoothing the gain estimates. We show that this method avoids artifacts in the correlated noise maps as a result of oversmoothing the gain solution, which is difficult to avoid with methods like boxcar smoothing, as Wiener filtering by construction maintains a balance between data fidelity and prior knowledge. Although our presentation and algorithm are currently oriented toward LFI processing, the general procedure is fully generalizable to other experiments, as long as the Solar dipole signal is available to be used for calibration.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

On de Sitter spacetime and string theory

We review various aspects of de Sitter spacetime in string theory: its status as an Effective Field Theory spacetime solution, its relation to the vacuum energy problem in string theory, its (global) holographic definition in terms of two entangled and noncanonical conformal field theories as well as a realization of a realistic de Sitter universe endowed with the observed visible matter and the necessary dark sector in order to reproduce the realistic cosmological structure. In particular, based on the new insight regarding the cosmological constant problem in string theory, we argue that in a doubled, [Formula: see text]-duality-symmetric, phase-space-like and noncommutative generalized-geometric formulation, string theory can naturally lead to a small and positive cosmological constant that is radiatively stable and technically natural. Such a formulation is fundamentally based on a quantum spacetime, but in an effective spacetime description of this general formulation of string theory, the curvature of the dual spacetime is the cosmological constant of the observed spacetime, while the size of the dual spacetime is the gravitational constant of the same observed spacetime. Also, the three scales associated with intrinsic noncommutativity of string theory, the cosmological constant scale, the Planck scale as well as the Higgs scale, can be arranged to satisfy various seesaw-like formulae. Along the way, we show that these new features of string theory can be implemented in a particular deformation of cosmic-string-like models.

Astronomy & Astrophysics↗
DOE OSTI2025

Benchmarking CO₂ storage simulations: Results from the 11 th Society of Petroleum Engineers Comparative Solution Project

The 11 th Society of Petroleum Engineers Comparative Solution Project (shortened SPE11 herein) benchmarked simulation tools for geological carbon dioxide (CO 2 ) storage. A total of 45 groups from leading research institutions and industry across the globe signed up to participate, with 18 ultimately contributing valid results that were included in the comparative study reported here. This paper summarizes the SPE11 results. A comprehensive introduction and qualitative discussion of the submitted data are provided, together with an overview of online resources for accessing the full depth of data. A global metric for analyzing the relative distance between submissions is proposed and used to conduct a quantitative analysis of the submissions. This analysis attempts to statistically resolve the key aspects influencing the variability between submissions. The study shows that the major qualitative variation between the submitted results is related to thermal effects, dissolution-driven convective mixing, and resolution of facies discontinuities. Moreover, a strong dependence on grid resolution is observed across all three versions of the SPE11. However, our quantitative analysis suggests that the observed variations are predominantly influenced by factors not documented in the technical responses provided by the participants. We therefore identify that unreported variations due to human choices within the process of setting up, conducting, and reporting on the simulations underlying each SPE11 submission are at least as impactful as the computational choices reported.

Nordbotten, Jan M. [Univ. of Bergen (Norway); Norw↗
DOE OSTI2023

Assessing the link between aerosol mixing state, structure and composition and their optical properties: Ascension Island as a testbed for the South‐East Atlantic aerosol regimes

Forest and savanna fires are a major source of pollution over the globe. Such fire events emit to the atmosphere a considerable amount of “fluffy” fractal black looking particles that are often referred to as black carbon (BC) or soot aerosols. In fact, BC particles (aerosols) emitted from savanna and agricultural fires over the African continent play an important role in the region’s and the global climate. These fires occur each year between July and October, which is referred to as the biomass burning (BB) season and are considered among the globe's largest man-made emission sources of BC particles. However, during these fire events, not only BC particles are emitted, but also other types of particles and gases that can interact with each other to create new particles, generating a slew of particles often generally referred to as BB aerosols. Although the majority of the fire emissions occur inland in the sub-Saharan part of Africa, their effect reaches far beyond the continent due to the prevailing easterly winds, which transport those aerosols over the South-East Atlantic (SEA) ocean, off the west-coast of Africa. The reason why these particles are so important to the regional and global climate is that they absorb sunlight radiation, which overall warms the climate. However, the magnitude of this warming effect is highly uncertain and depends upon a multitude of aspects. Our overarching goal for this project was to better understand the changes in the aerosol properties as they transport from fire sources downstream toward the ocean and how this can eventually affect the earth's radiative budget in terms of warming or cooling. Following the above, our work here was focused on the investigation of the African BB aerosol plumes mixing state (mixing of BB aerosols and other aerosol types), composition and size distribution as they transport from the African continent towards the SEA ocean, and their link with some of the commonly measurable bulk optical properties such as mass absorption coefficient (MAC) and single scattering albedo (SSA). We utilized three field missions that were conducted over the SEA ocean between 2016 and 2018. Specifically, we used (1) ground-based measurements from the DOE ARM Mobile Facility (AMF1), which was deployed at Ascension Island (ASI) for the LASIC (Layered Atlantic Smoke Interactions with Clouds) campaign between June 2016 and October 2017, (2) airborne measurements from the UK CLARIFY (Clouds and Aerosol Radiative impacts and Forcing) campaign during Aug-Sep-2017, and (3) airborne measurements from the ORACLES (Observations of Aerosols above Clouds and their interactions) campaign during Aug-2017, and Sep-Oct-2018. The three campaigns cover a relatively large region, from the western African coast on the east towards Ascension Island in the middle of the SEA to the west. We used the data gathered by these campaigns to find how BB properties and composition change from near emission sources (the ORACLES campaign flights) downstream (the CLARIFY flights and the ground based LASIC measurements). We used particle trajectory following methodologies to connect the measurements from the different campaigns, which allowed us to follow a certain aerosol plume (airmass) from near-source towards Ascension Island. We found out that atmospheric aging processes governed by the UV light from the sun (photochemistry) and cloud processes (aqueous chemistry) govern the changes seen in the particle composition during the transport were more dominant in dictating aerosol composition than specific emission composition or source types. We assessed how aerosol optical properties change during the BB season and what are the main drivers of this change. We found that the enhanced ratio of BC to CO is well correlated with single scattering albedo (SSA) and mass absorption coefficient (MACBC), providing a simple way to estimate the aerosol optical characteristics in the south-eastern Atlantic Ocean. From the analysis of the location of BB, the primary source fuel, the water content in the fuel, combined with the mean cloud cover and precipitation in the transport areas of the BB plume, we conclude that the increase in BC/CO from June to August is likely to be caused by burning becoming more flaming (hot fires), and the decrease in BC/CO in September and October may be caused by smoldering (colder) fires. We found that aerosol hygroscopicity increases with decreasing altitude below 2km, and that enhanced BB hygroscopicity at lower altitudes is mainly due to a lower organic aerosol (OA) fraction, increased sulfate fraction, and greater hygroscopicity parameter of OA at lower altitudes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Evaluation of CMIP6 GCMs Over the CONUS for Downscaling Studies

Despite the necessity of Global Climate Models (GCMs) sub-selection in downscaling studies, an objective approach for their selection is currently lacking. Building on the previously established concepts in GCMs evaluation frameworks, we develop a weighted averaging technique to remove the redundancy in the evaluation criteria and rank 37 GCMs from the sixth phase of the Coupled Models Intercomparison Project over the contiguous United States. GCMs are rated based on their average performance across 66 evaluation measures in the historical period (1981–2014) after each metric is weighted between zero and one, depending on its uniqueness. The robustness of the outcome is tested by repeating the process with the empirical orthogonal function analysis in which each GCM is ranked based on its sum of distances from the reference in the principal component space. The two methodologies work in contrasting ways to remove the metrics redundancy but eventually develop similar GCMs rankings. A disparity in GCMs' behavior related to their sensitivity to the size of the evaluation suite is observed, highlighting the need for comprehensive multi-variable GCMs evaluation at varying timescales for determining their skillfulness over a region. The sub-selection goal is to use a representative set of skillful models over the region of interest without substantial overlap in their future climate responses and modeling errors in representing historical climate. Additional analyses of GCMs' independence and spread in their future projections provide the necessary information to objectively select GCMs while keeping all aspects of necessity in view.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Microbial Ecology of Permafrost Soils: Populations, Processes, and Perspectives

Permafrost microbial research has flourished in the past decades, due in part to improvements in sampling and molecular techniques, but also the increased focus on the permafrost greenhouse gas feedback to climate change and other ecological processes in high latitude and alpine permafrost soils. Permafrost microorganisms are adapted to these extreme environments and remain active at low temperatures and when resources are limited. They are also an important component of global elemental cycles as they regulate organic matter turnover and greenhouse gas production, particularly as permafrost thaws. Here we review the permafrost microbiology literature coupled with an exploration of its historical aspects, with a particular focus on a new understanding advanced by molecular biology techniques. We further identify knowledge gaps and ways forward to improve our understanding of microbial contributions to ecosystem biogeochemistry of permafrost-affected systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Projected network performance for next-generation xenon monitoring systems

Next-generation radioxenon monitoring systems are reaching maturity and are expected to improve certain aspects of performance in verifying the absence of nuclear tests. To predict the improvement in detecting and locating nuclear releases, thousands of releases all over the globe were simulated and the global detection probability was calculated. This was done for the International Monitoring System network of noble gas samplers as it currently exists (25 certified stations), and how it would be for potential future network sizes of 39 and 79 stations. The probability of detection was calculated for releases ranging from 10 10 Bq to 10 16 Bq of 133 Xe and presented as coverage maps and global integrals for both current and next-generation monitoring systems. Similarly, the number of detecting stations and the number of detecting samples were tabulated to elucidate the possibilities for enhanced location capability. Improvements in global detection coverage are maximized at different release sizes in a way that depends on the station density. For example, for releases of 3×10 14 Bq and 39 stations, the detection probability would rise from 60% to 70% with next-generation systems, while for releases of 10 13 Bq and 79 stations, it would rise from 37% to 52%. Achieving an average of two detecting stations requires a 1015 Bq release for a 39-station network and a 10 14 Bq release for a 79-station network. The largest impact of using next-generation systems may be the confidence, failure tolerance, and location capability that arise from obtaining multiple samples associated with a single release event.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Role of the Terrestrial Biosphere in Atmospheric Chemistry and Climate

The terrestrial biosphere–atmosphere interface provides a key chemical, biological, and physical lower boundary for the atmosphere. The presence of vegetation itself modifies the physical boundary, or the biogeophysical aspects of the system, by controlling important climate drivers such as soil moisture, light environment, and temperature. The leaf surface area of the terrestrial biosphere provides additional surface area for emissions, and it can be up to 55% of the total Earth’s surface area during the boreal summer. Vegetation also influences the biogeochemical aspects of the system by emitting a broad suite of reactive trace gases such as biogenic volatile organic compound (BVOC) emissions and climate-relevant primary biological aerosol particles (PBAP). Many of these emissions are a function of meteorological and climatological conditions at the surface, including temperature, light environment, soil moisture, and winds. Once emitted, they can be processed in the troposphere through a suite of chemical reactions. BVOC can contribute to the formation of ozone and secondary organic aerosols (SOA), and PBAP can rupture to form smaller particles with climatic relevance. These emissions and subsequent aerosol products can influence atmospheric processes that affect the surface climate, such as the attenuation of radiation, the formation of greenhouse gases such as ozone that can feedback to surface air temperature, and the alteration of clouds and subsequent precipitation. These atmospheric changes can then feedback to the land surface and emissions themselves, creating positive or negative feedback loops that can dampen or amplify the emission response. For the dominant BVOC isoprene, the feedback response to temperature can be positive or negative depending on ambient temperatures that drive isoprene emissions. The feedback response to soil moisture and precipitation can be positive, negative, or uncoupled depending on the moisture content of the soil and the total atmospheric aerosol loading. For light, the isoprene response can be positive or negative depending on the role of diffuse light. Overall, these feedbacks highlight the dynamical response of the biosphere to changing atmospheric conditions across a range of time scales, from minutes for trace gases and aerosols, to months for phenological changes, to years for land cover and land use change. Here, the dynamic aspect of this system requires us to understand, simulate, and predict the complex feedbacks between the biosphere and atmosphere and understand their role in the simulation and understanding of climate and global change. From the observational perspective, these feedbacks are challenging to identify in observations, and predictive modeling tools provide a crucial link for understanding how these feedbacks will change under warming climate scenarios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multicriteria-Based Selection of Microalgae Biorefineries: Biomass Composition Defines the Most Suitable Product Portfolios

The supply of microalgae-derived biofuels and bioproducts will be vital in a global-scale bioeconomy. As the diversity of microalgae strains and their compositional plasticity may yield a wide array of products of market interest, the design of effective biorefineries is a central aspect in the path to making microalgae-based products available in the market. In this way, the conversion of microalgae biomass should be planned to employ mature technologies, while maximizing economic and environmental benefits obtained from a diverse product portfolio. This study applied sequential, hybrid Multicriteria Decision Analyses (MCDA) to aid the decision-making process of outlining the most suitable biorefining pathways for specific compositional profiles. For this, the methodology simultaneously considered multiple technical, economic, and environmental criteria, such as market aspects for the main algae-derived products, potential reduction in greenhouse gas (GHG) emissions provided by the biobased alternatives, and technology readiness level of conversion routes, among others. The framework was tested using productivity and compositional data for 13 high-productivity summer strains cultivated under varying nutrient availability. The analysis pointed to compositional profile being a key driver in defining the core biorefining strategy of algae biomass, with lipid-to-carbohydrate ratios higher than roughly 1 warranting the preferential processing of lipids into hydrocarbon fuels with the remainder of the algae biomass compounds being sent to higher-value applications, such as carboxylic acids and renewable thermoplastic substitutes. An in-depth process simulation, techno-economic assessment (TEA), and life-cycle analysis (LCA) effort was carried out as a closing step to corroborate the results stemming from the proposed framework. This study validates the use of MCDAs as a screening method prior to implementing more time-consuming analysis techniques and makes a compelling case for this approach as a product selection tool on a wide range of algae species, thus helping establish species-agnostic (but composition-driven) biorefineries.

biofuels↗
DOE OSTI2024

Hydrogen Sustainable Infrastructure Guidelines (H2SIG)

Infrastructure interacts with major global challenges inclusive of climate change, resilience, equity and social justice, environmental protection and biodiversity, public health, and economic recovery. This effort directly addresses how to apply sustainability assessments to the unique aspects of hydrogen (H2) infrastructure projects using the Envision® sustainability framework developed by the Institute for Sustainable Infrastructure (ISI). Envision is a flexible system of criteria and performance objectives to aid decision makers and help project teams identify sustainable approaches during planning, design and construction of infrastructure projects that will continue throughout the project’s operations, maintenance, and end-of-life phases. The goal of this work is to support those interested in conducting sustainability assessments for hydrogen infrastructure projects. Through this work the team has developed hydrogen-specific guidelines and best practices to assist project developers, investors and regulators in straightforward application of the Envision framework to systematically enhance clarity and increase objectivity across hydrogen projects. Subject matter experts from 20 different organizations (industry, non-profits, municipalities, emissions regulators, national labs) were engaged through 7 focus groups to discuss the H2-prioritized Envision requirements and elements to be included in the guidelines. In addition to these guidelines, the team conducted case studies as a way of demonstrating and informing the guidelines and providing examples or ideas for implementing sustainability in future projects. Through this study, the authors found that hydrogen infrastructure projects can incorporate many sustainable practices including reducing GHG emissions affecting climate change, reducing air pollutant emissions affecting the health of communities, synergistically handling waste byproducts, integrating into existing infrastructure, incorporating renewable energy, and addressing equity and environmental justice. Additionally, hydrogen infrastructure projects could benefit from 2-way communication engagement and collaborative planning with stakeholders, educational awareness of hydrogen technology, tracking and reporting on water use and water quality, and including monetized environmental and social benefits in life-cycle cost estimates. This document is the final technical report for the Hydrogen Sustainability Assessment Methods for Project Development project. While the main focus of the report is to provide guidelines for applying sustainability to hydrogen infrastructure, there are sections within the appendix providing completed project tasks and methodology.

08 HYDROGEN↗
DOE OSTI2021

Thermal confinement and transport in spherical tokamaks: a review

Here, we review the thermal plasma confinement and transport properties observed and predicted in low aspect ratio tokamaks, or spherical tokamaks (STs), which can depart significantly from those observed at higher aspect ratio. In particular, thermal energy confinement scalings show a strong, near linear dependence of energy confinement time on toroidal magnetic field, while the dependence on plasma current is more modest, the opposite of what is seen at higher aspect ratio. STs have revealed a very strong improvement in normalized confinement with decreasing collisionality, much stronger than at higher aspect ratio, which bodes well for an ST-based fusion pilot plant should this trend continue at an even lower collisionality than has already been accessed. These differences arise because of fundamental differences in transport in STs due to the more extreme toroidicity (i.e. reduced region of bad curvature), and to the relatively larger $E_r \times B$ shearing rates, both of which can suppress electrostatic drift wave instabilities at both ion and electron gyroradius scales. In addition, electromagnetic effects are much stronger in STs because they operate at high β T . Gyrokinetic (GK) studies, coupled with low- and high-k turbulence measurements, have shed light on the underlying physics controlling transport. At lower β T , both ion- and electron-scale electrostatic drift turbulence may be responsible for transport. At higher β T , microtearing, kinetic ballooning, and hybrid trapped electron/kinetic ballooning modes increasingly play a role, and they have a much stronger impact in the core of ST plasmas than at higher aspect ratio. Flow shear affects the balance between ion- and electron-scale modes. Non-linear GK simulations find regimes where the electron heat flux decreases with decreasing collisionality, consistent with the experimental global normalized confinement scaling. The ST is unique in that the relatively low toroidal magnetic field allows for localized measurements of electron-scale turbulence, and this coupled with turbulence measurements at ion-scales has facilitated detailed comparisons with GK simulations. These data have provided compelling evidence for the presence of ion temperature gradient and electron temperature gradient turbulence in some plasmas, and direct experimental support for the impact of experimental actuators like rotation shear, density gradient and magnetic shear on turbulence and transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

A memory-driven mapping algorithm for heterogeneous systems

mpibind is a memory-driven algorithm to map parallel hybrid applications to the underlying hardware resources transparently, efficiently, and portably. There are two fundamental aspects of this algorithm. First, unlike existing mappings, its primary design point is the memory system. Compute elements are selected based on the identified memory components and not vice versa. Second, it embodies a global awareness of hybrid programming abstractions as well as heterogeneous devices.

Leon Borja, EdgarA↗
DOE OSTI2023

Grand challenges in the digitalisation of wind energy

The availability of large amounts of data is starting to impact how the wind energy community works. From turbine design to plant layout, construction, commissioning, and maintenance and operations, new processes and business models are springing up. This is the process of digitalisation, and it promises improved efficiency and greater insight, ultimately leading to increased energy capture and significant savings for wind plant operators, thus reducing the levelised cost of energy. Digitalisation is also impacting research, where it is both easing and speeding up collaboration, as well as making research results more accessible. This is the basis for innovations that can be taken up by end users. But digitalisation faces barriers. This paper uses a literature survey and the results from an expert elicitation to identify three common industry-wide barriers to the digitalisation of wind energy. Comparison with other networked industries and past and ongoing initiatives to foster digitalisation show that these barriers can only be overcome by wide-reaching strategic efforts, and so we see these as “grand challenges” in the digitalisation of wind energy. They are, first, creating FAIR data frameworks; secondly, connecting people and data to foster innovation; and finally, enabling collaboration and competition between organisations. The grand challenges in the digitalisation of wind energy thus include a mix of technical, cultural, and business aspects that will need collaboration between businesses, academia, and government to solve. Working to mitigate them is the beginning of a dynamic process that will position wind energy as an essential part of a global clean energy future.

17 WIND ENERGY↗