Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fractional operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Low-temperature solar thermal-power systems for residential electricity supply under various seasonal and climate conditions

In this work, the performance of low-temperature (<100 degrees C) solar thermal-power systems to satisfy residential electric loads was analyzed. The solar-driven system was designed to provide a fraction of the total electricity demand in a complementary operation with the electric grid. The analysis was conducted for an coperation during seven days each season, considering real solar and climate variables and residential loads at different climate zones in the United States. The efficiency of the system strongly depends on the solar radiation profile and the ambient temperature. Maximum efficiencies of around 9.5% were obtained in the cold and marine climate zones due to the high solar energy input and low heat dissipation temperatures. In these two zones, the system could supply more than 98% of the electricity demand all seasons. At mixed-humid and hot-humid regions, the system supplied around 50% of the electric load in three of the four seasons, but it only supplies about 27% of the electricity needs in the mixed-humid zone during summer and hot-humid zone during winter. The effect of the solar collector field area and the tank volume was also analyzed. In general, larger solar fields positively impact the efficiency. However, the impact of the tank volume varies depending on the solar radiation profile and the load requirements. Average efficiencies for the seven-day operation can be larger than 6% with a proper selection of the solar collector area and tank volume for an Organic Rankine Cycle with a capacity of about 2.6 kW. Finally, an economic analysis of the system was conducted, and the results were compared with a solar PV + battery system of similar capacity. It is expected that the cost for the analyzed solar-thermal system decreases in the coming years with the increased interest on low temperature applications.

14 SOLAR ENERGY↗
DOE OSTI2025

MechBERT: Language Models for Extracting Chemical and Property Relationships about Mechanical Stress and Strain

Language models are transforming materials-aware naturallanguage processing by enabling the extraction of dynamic, context-rich information from unstructured text, thus, moving beyond the limitations of traditional information-extraction methods. Moreover, small language models are on the rise because some of them can perform better than large language models (LLMs) when given domain-specific questionanswer tasks, especially about an application area that relies on a highly specialized vernacular, such as materials science. We therefore present a new class of MechBERT language models for understanding mechanical stress and strain in materials. These employ Bidirectional Encoder Representations for transformer (BERT) architectures. We showcase four MechBERT models, all of which were pretrained on a corpus of documents that are textually rich in chemicals and their stress–strain properties and were fine-tuned on question-answering tasks. We evaluated the level of performance of our models on domain-specific as well as general English-language question-answer tasks and also explored the influence of the size and type of BERT architectures on model performance. We find that our MechBERT models outperform BERT-based models of the same size and maintain relevancy better than much larger BERT-based models when tasked with domain-specific question-answering tasks within the stress–strain engineering sector. These small language models also enable much faster processing and require a much smaller fraction of data to pretrain them, affording them greater operational efficiency and energy sustainability than LLMs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Summertime Continental Shallow Cumulus Cloud Detection Using GOES‐16 Satellite and Ground‐Based Ceilometer at North Alabama

Abstract Accurate simulations of boundary layer cloud processes remain challenging in Earth system modeling. Observations are essential to evaluate and improve models of such processes. This study introduces a comprehensive validation framework for a satellite‐based detection algorithm of continental shallow cumulus (ShCu) clouds during the daytime, which was initially developed using ground‐based observations of stereo cameras at the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains site (J. Tian et al., 2021, https://doi.org/10.3390/rs13122309 , 2022, https://doi.org/10.1029/2021gl097070 ). To validate this algorithm, the framework employs ground‐based ceilometer measurements from North Alabama (NA) where ShCu populations are prevalent. This study first generates clear‐sky surface reflectance maps at NA and identifies ShCu pixels with a detection threshold using Geostationary Operational Environmental Satellite (GOES) reflectance data. The obtained cloud fractions (CFs) are then compared against CFs from a ground‐based ceilometer, considering factors such as observed area differences, satellite parallax issue, and systematic biases. We found that with a detection threshold (∆R) of 0.05, the ShCu detection algorithm is effective for NA, enabling the reproduction of hourly ShCu CFs using GOES. Our framework is straightforward and easily repeatable to evaluate the effectiveness of a ∆R threshold for detecting ShCu clouds in various geographic regions where ceilometers are deployed. This satellite detection of ShCu provides a crucial regional context for ground‐based measurements, facilitating the tracking of convection initiation and its coupling with land surface conditions. Integrating localized ground‐based and regional satellite data will enhance our ability to conduct thorough studies of cloud morphology and land‐atmosphere interactions in North Alabama.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Achievement of highly radiating plasma in negative triangularity and effect of reactor-relevant seeded impurities on confinement and transport

The first achievement of highly radiating plasmas in negative triangularity (NT) is shown with an operational space featuring high core radiation at high Greenwald fraction obtained with the injection of reactor-relevant seeded gases. These NT shape diverted discharges reach high values of normalized plasma pressure ( β N > 2) at high radiation fraction with no edge localized modes (ELMs) and a simultaneous reduction of the divertor heat flux. Here, we demonstrate that as long as the impurity level in the core is kept low to avoid excessive fuel dilution and impurity accumulation, integration of NT configuration with high radiation fraction not only is achievable but it can lead to confinement improvement with stabilization effects originating from collisionality, E × B shear and profiles changes due to impurity radiation cooling. The underlying physics mechanism is robust and reproducible and holds for a variety of impurity species. The absence of the requirement to stay in H-mode translates in a higher core radiation fraction potentially allowed in NT shape effectively mitigating the power exhaust issue. The results presented here demonstrate a path to high performance, ELM free and highly radiative regime with reactor-relevant seeding gases making this regime a potential new scenario for reactor design.

confinement improvement↗
DOE OSTI2021

Effective Kitchen Ventilation for Healthy Zero Net Energy Homes with Natural Gas

Past studies indicate that kitchen ventilation that minimally complies with California’s Residential Building Code is inadequate at controlling combustion pollutants from natural gas burners and particulate matter produced during cooking. Effectiveness is further limited by misperceptions that kitchen ventilation is infrequently needed. This project developed the technical basis for updating kitchen ventilation requirements to protect health in new California homes, especially in smaller homes common among low-income renters. Tasks included (1) a field study of ventilation equipment performance and indoor air quality in 23 low-income apartments at four sites; (2) analysis of range hood use related to cooking time and household parameters using data from 54 houses and 17 low-income apartments; (3)a measurement-based study to quantify performance of over-the-range microwave ovens with integrated exhaust fans;and (4) pollutant exposure simulations to inform capture efficiency standards.The field study found operational deficiencies with mechanical ventilation systems in a substantial fraction of low-income apartments that affected performance, resulting in higher exposures to pollutants generated indoors. Using gas cooking burners produced high short-term and weekly time-averaged nitrogen dioxide in apartments.Range hoods were used more frequently with cooking in houses (36percent) than apartments (28percent); use increased with overall cooking frequency in a home and with duration of cooktop but not oven events; actual use was correlated to, but lower than,self-reported use;and use was more frequent in houses when cooking generated any fine particulate matter (PM2.5)or when high PM2.5resulted from cooking in apartments. Performance of over-the-range microwaves with integrated exhaust fans was similar to that of range hoods of comparable price. Simulation analysis found that performance standards need to be updated to ensure that kitchen exhaust ventilation adequately protects for substantial cooking in new California residences.

03 NATURAL GAS↗
DOE OSTI2021

BETO 2021 Peer Review - FCIC Task 6: High Temperature Conversion

The impacts of feedstock variability on pyrolysis processes are significant but poorly defined. Current engineering designs are based on empirical guidelines, useful only over a narrow range of feedstock properties. The objectives of this project are to (1) Develop science-based knowledge of how feedstock attributes and operational parameters impact pyrolysis process reliability and product quality; and (2) Build an experimental and computational toolset that predicts these outcomes, enabling processes to optimize reliability and product quality. Biomass is a complex feedstock. Controlling for and testing the effects of individual attributes is very challenging. This project couples multiscale experimentation and modeling to accurately capture the fundamental physics and chemistry of biomass flow and conversion behavior in feeding and pyrolysis reactor operations. Our focus is on pine residue attributes – anatomical fraction (bark, needles, wood), particle morphology (size/shape distribution, density, porosity), and chemical composition (extractives, biopolymers, alkali metals) – that impact product quality for downstream catalytic upgrading. Because detailed pyrolysis product characterization is limited, cutting-edge analytical techniques are being developed to reveal impactful product attributes. The tools and knowledge developed here will enable integrated pyrolysis-based processes that are more robust, flexible, and market-responsive with respect to feedstock variability.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Hydrogen production from full-strength corn stover fermentation effluent in single-chamber replaceable-cathode microbial electrolysis cells

Lignocellulosic residual biomass generated by the agricultural sector is an abundant feedstock for biohydrogen production via dark fermentation. However, this process is intrinsically inefficient, converting only ~30% of the reductant energy into H2 and leaving substantial amounts of reduced byproducts. These byproducts, mostly found in the fermentation effluents, can be further valorized in microbial electrolysis cells (MECs) to enhance the overall H2 recovery. However, current MEC configurations are typically dual- or single-chamber systems, yet both suffer from key inefficiencies. Dual-chamber systems rely on proton exchange membranes that are costly and prone to rapid biofouling, whereas single-chamber, membraneless systems are limited by reduced productivity due to H2 recycling and methanogenic consumption In this study, three single-chamber, 50-mL replaceable-cathode microbial electrolysis cells (RC-MECs) were 3D-printed and equipped with a physical separator to isolate anode and cathode compartments and limit H2 migration. Full-strength milled corn stover (MCS) fermentation effluent (COD of ~23.8 g-COD/L) was treated in fed-batch mode over two operational periods spanning 21 (Run 1) and 80 (Run 2) days. The RC-MECs exhibited comparable performance in both runs: after biofilm maturation, current densities exceeded 100 A/m²_cathode, COD removal reached up to 43%. Notably, extended RC-MECs operation led to a substantial methanogenic activity with the CH4 fraction in the cathode gas increasing to as high as 80% of the total biogas. Additions of a methanogenesis inhibitor 2-bromoethanesulfonate (2-BES) produced transient increases in hydrogen yields (11.51 and 5.12 L-H2/L_reactor/day in Runs 1 and 2, respectively); however, sustained 2-BES addition in subsequent cycles reduced total biogas production, decreased COD removal, and led to volatile fatty acid accumulation. Overall, single-chamber MECs can treat high-strength dark fermentation effluents while improving H2 recovery, but methanogenesis remains a key bottleneck, and complete long-term inhibition may be operationally unsustainable.

Hydrogen Production↗
DOE OSTI2022

Chemical Thermodynamic Modeling of Molten Salts to Support Off-Gas Abatement Systems

The reprocessing of used nuclear fuel by any means will liberate gaseous fission products, such as hydrogen ( 3 H), carbon ( 14 C), noble gases ( 85 Kr), and halogens ( 129 I), from the irradiated fuel. These elements will distribute through chemical processing operations and partition into process off-gas streams, and the specific volatile release fractions will be dictated by the chemical and physical properties of the system. A recent assessment found that there were significant knowledge gaps regarding the release quantities of volatile radionuclides from individual unit operations. These knowledge gaps limited the ability to determine what dedicated off-gas treatment technologies could be required for electrochemical-based reprocessing facilities. Unfortunately, experimental efforts to quantify release fractions are limited by the challenges associated with performing experiments using irradiated fuel. This report documents preliminary thermodynamic predictions of iodine and tritium release from chloride-based molten salts as part of an effort to better direct resources toward those experiments (both simulant and irradiated) that will be of the greatest impact. It was predicted that less than 0.5% of tritium was expected to be released and that nearly all of that amount would be released as H 2 . Thermochemical data for hydrogen (H 2 ) are of high fidelity, and no additional validation is recommended. Less than 0.05% of iodine was predicted to be released, with the primary volatile species being Cs 2 I 2 . Unlike the tritium predictions, the data underpinning the iodine release predictions are of low quality. It is recommended that a limited experimental program be dedicated to expanding the current physical property and thermodynamic property data for iodine in electrochemical processing and molten salt conditions, including vapor pressure measurements for the dimerized species predicted to comprise the majority of iodine release. Validating and improving the thermodynamic properties used in predictive modeling can reduce the need for expensive testing with irradiated fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Experimental Investigation of a Novel Membrane-Based Condensing Heat Exchanger for High Efficiency Furnaces

Building space heating consumes approximately one-third of all global natural gas end use. Higher-efficiency (i.e., condensing) furnaces constitute only about 30% of the annual furnace shipments in the United States because the condensing heat exchangers must use highly expensive, corrosion-resistant materials to be protected from acidic components in the furnace flue gas stream. Increasing the market share of high-efficiency furnaces will reduce greenhouse gas emissions. This study developed and tested a benchtop prototype of a novel membrane-based heat exchanger (MHX) for high-efficiency furnaces to achieve nonacidic condensation via nanoporous membranes. Test results show that both sensible and latent heat were recovered by the MHX, and the fraction of latent heat recovery ranged from about 25% to 45% over the range of operating conditions evaluated. The amount of water condensed through the MHX increased with the increase of flue gas flow rate and decreased with increasing coolant temperature. The fraction of latent heat recovery decreased with the increase of flue gas flow rate and coolant temperature. The pH value of condensed water from the MHX was only mildly acidic, varying from 5.3 to 5.6 without any additional treatment, about 2.0 to 2.3 pH points higher (i.e., less acidic) than typical values for the condensate from conventional condensing furnaces. Therefore, feasibility of the MHX was experimentally verified, and the MHX could enable wider market penetration of highly energy-efficient condensing furnaces by reducing costs associated with managing the acid condensation compared with conventional condensing furnaces, possibly enabling the use of existing vent systems when replacing noncondensing furnaces (due to higher flue gas exit temperatures), and possibly reducing furnace first costs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Mechanism for particle fractionalization and universal edge physics in quantum Hall fluids

Abstract Advancing a microscopic framework that rigorously unveils the underlying topological hallmarks of fractional quantum Hall (FQH) fluids is a prerequisite for making progress in the classification of strongly-coupled topological matter. We present a second-quantization framework that reveals an exact fusion mechanism for particle fractionalization in FQH fluids, and uncovers the fundamental structure behind the condensation of non-local operators characterizing topological order in the lowest-Landau-level. We show the first exact analytic computation of the quasielectron Berry connections leading to its fractional charge and exchange statistics, and perform Monte Carlo simulations that numerically confirm the fusion mechanism for quasiparticles. We express the sequence of (bosonic and fermionic) Laughlin second-quantized states, highlighting the lack of local condensation, and present a rigorous constructive subspace bosonization dictionary for the bulk fluid. Finally, we establish universal long-distance behavior of edge excitations by formulating a conjecture based on the DNA, or root state, of the FQH fluid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Separation of cobalt, nickel, and manganese in leach solutions of waste lithium-ion batteries using Dowex M4195 ion exchange resin

Current methods to separate and recover critical metals from waste lithium-ion battery (LIB) scrap require multiple unit operations that involve selective leaching and a combination of separation methods. These methods include impurity removal, solvent extraction, ion exchange, and precipitation, to achieve high purity Co and Ni products. In this paper an efficient extraction strategy was developed to individually separate Ni and Co from a LIB leachate that was generated from an electrochemical leaching process. By using Dowex M4195 resin, as the only method of separation, additional impurity removal operations were not needed. After loading and eluting, three different fractions were obtained: 99.0% Ni concentrate, 98.5% Co concentrate, and a Li/Mn rich concentrate allowing the separation of Ni, Co and Mn. Here, the developed process is then presented as an alternative for metal recovery from leachates from scrap LIBs with minimum chemical addition and pH adjustment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fractional Laplacian spectral approach to turbulence in a dusty plasma monolayer

This work presents an analytical investigation of anomalous diffusion and turbulence in a dusty plasma monolayer, where energy transport across scales leads to the spontaneous formation of spatially disordered patterns. Many-body simulations of 10,000-particle dusty plasma monolayers are used to demonstrate how the global dynamics depend on the statistical properties of the dust assembly for realistic laboratory conditions. We find that disorder due to variations in the dust size distribution and charge-driven nonlocal interactions resulting in anomalous dust diffusion are key factors for the onset of instabilities. The resulting dynamics exhibit features of inertial turbulence over slightly more than half a decade of scales proportional or smaller than the Debye shielding length. These processes are examined analytically using a recently developed Fractional Laplacian Spectral (FLS) technique, which identifies the active energy channels as a function of scale, disorder concentration, and features of the nonlocal-interactions. The predictions from the theoretical (spectral) analysis demonstrate agreement with the results from the many-body (kinetic) simulations, thus providing a powerful tool for the study of active turbulence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Computationally efficient evaluation of optimum homogeneous charge compression ignition operating range with accelerated multizone engine cycle simulation

The very intensive calculations necessary to define a performance map requiring evaluation of over a hundred individual operating points can be efficiently conducted with accelerated multizone for engine cycle simulation, leading to a definition of regions of acceptable and optimum homogeneous charge compression ignition operation. Accelerated multizone for engine cycle simulation has the virtue of enabling accurate evaluation of many operating conditions based on thermal stratification data from a single fluid mechanics run at motored conditions. This is possible because thermal stratification is more sensitive to engine geometry than to operating conditions. In this article, accuracy of accelerated multizone for engine cycle simulation is demonstrated by comparison with experimental data for iso-octane homogeneous charge compression ignition operation over a broad range of lean equivalence ratios (0.14–0.28). The validated accelerated multizone for engine cycle simulation model is then applied to generating a performance map for an engine controlled by appropriately adjusting equivalence ratio and internal exhaust gas recirculation. Regions of acceptable and optimum combustion are identified. It is finally demonstrated that while indicated mean effective pressure remains low for optimum homogeneous charge compression ignition operation (1–4 bar), this is sufficient for a large fraction of typical driving in light-duty vehicles. Much driving including idle can therefore be done in homogeneous charge compression ignition mode at high efficiency and low (essentially zero) NOx and particulate matter emissions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Dissolution of Fluoride Salts in Hanford Tank Waste

The Direct Feed High-Level Waste (DFHLW) strategy seeks to bypass the Hanford Waste Treatment and Immobilization Plant Pretreatment Facility while retaining some processing functions to maximize waste feed loading and minimize high-level waste (HLW) waste volume. The DFHLW flowsheet needs leaching, washing, and solids concentration operations either in new or existing tanks. The effectiveness and efficiency of sludge washing has a substantial impact on DST space, mission duration, and the evaporation and low-activity waste (LAW) treatment operations required by these large wash-water additions. One target species requiring washing is fluoride. The HLW glass composition limits for fluorine drive operations to dissolve fluoride-bearing salts into the LAW fraction and thereby maximize waste loading in HLW glass. The fluoride in many high-level wastes at Hanford is predominantly in the form of fluoride-salt precipitates: villiaumite (NaF), kogarkoite (Na 3 FSO 4 ), and natrophosphate (Na 7 F(PO 4 ) 2 ·19H 2 O). Fluoride produces melter off-gas that creates corrosion risk in the off-gas system piping, while the sulfate and phosphate in the fluoride double salts kogarkoite and natrophosphate can be detrimental to glass waste loading. Fluoride salts are sparingly soluble, with solubilities ranging from approximately 40 to 130 kg per kL of pure water, and the dissolution kinetics of the three fluoride salts are not well known. Unexpected delays in a tank dissolution process could be encountered as a result of the lack of information about dissolution rates. In addition, if the double salts show transient non-stoichiometric dissolution of fluoride versus phosphate or sulfate, unexpectedly high concentrations of one of these other constituents could be produced. Washington River Protection Solutions authorized Pacific Northwest National Laboratory to collect the available data for fluoride salt dissolution rate, provide a scoping estimate of dissolution time if possible, and identify gaps in the understanding and predictive capability for estimating dissolution time. Open literature and Hanford reports were reviewed to document, understand, and (where possible) evaluate limitations on fluoride salt equilibria and dissolution kinetics, including both mass transport and surface reaction rate. Scoping estimates of dissolution time were made for mass-transfer-controlled dissolution of spherical particles of fluoride salts suspended in liquid. This is not the only potential governing mechanism; dissolution could be substantially slower if the surface reaction rate (the rate of release of ions from the surface) is the controlling mechanism. When the minimum amount of water for complete dissolution is used and the slip velocity between the liquid and suspended particles is less than or equal to the terminal settling velocity, the estimated mass-transfer rates allow 0.1 mm particles of fluoride salt to dissolve in minutes at 25 °C in water containing no other dissolved salts. Much larger solids, such as the 6-mm chunks that have been seen in heels, could take a few hours to more than a week to dissolve. The actual dissolution times will depend strongly on the actual slip velocity, the extent of particle suspension, constraint by surface reaction rates, the ratio of solvent to solid, and the presence of common ions that shift the solubility equilibria to restrict dissolution of fluoride salts.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

UEDGE modeling of plasma detachment of CFETR with ITER ‐like divertor geometry by external impurity seeding

Abstract Efficient handling of high heat flux on the plasma‐facing components, particularly the divertor targets, poses a significant challenge for the Chinese Fusion Engineering Testing Reactor (CFETR) with fusion power of Gigawatt. This work investigates the divertor plasma detachment of CFETR with a standard ITER‐like divertor geometry by neon (Ne) or argon (Ar) impurity seeding using UEDGE code. The cross‐field drifts terms are switched off, and fluid neutral models and a “fixed‐fraction” impurity model are applied to enable efficient simulations for the study of CFETR detachment. In order to reduce the heat load on the divertor targets below the acceptable level (<10 MW/m 2 ), the impurity fraction ( f ), pumping speed ( S ), and upstream density are varied to identify the suitable operations window during Ne seeding. The effects of Ne and Ar impurities on the plasma detachment are compared. It is found that with the power across the core‐edge interface P SOL = 200 MW and separatrix density of 2.8 10 19 , Ne impurity fraction ≥1.7%, and Ar impurity fraction ≥0.24% can achieve the partial detachment. Achieving similar total radiation power (˜148 MW), the Ne fraction is 2.3% and the Ar fraction is 0.24%. Moreover, the simulation results indicate that Ar exhibits better power radiation efficiency and core compatibility compared with Ne.

Zhang, M. Z.↗
DOE OSTI2023

Measurement of branching fractions of Λ$^+_c$ → p⁢K$^0_S$K$^0_S$ and Λ$^+_c$ → p⁢K$^0_S$⁢η at Belle

We present a study of a singly Cabibbo-suppressed decay Λ$^+_c$ → p⁢K$^0_S$K$^0_S$ and a Cabibbo-favored decay Λ$^+_c$ → p⁢K$^0_S$⁢η based on 980 fb -1 of data collected by the Belle detector, operating at the KEKB energy-asymmetric e + ⁢e - collider. We measure their branching fractions relative to Λ$^+_c$ → p⁢K$^0_S$: $\mathscr{B}$(Λ$^+_c$ → p⁢K$^0_S$K$^0_S$)/$\mathscr{B}$(Λ$^+_c$ → p⁢K$^0_S$) = (1.48 ± 0.08 ± 0.04) × 10 -2 and $\mathscr{B}$(Λ$^+_c$ → p⁢K$^0_S$η)/$\mathscr{B}$(Λ$^+_c$ → p⁢K$^0_S$) = (2.73 ± 0.06 ± 0.13) × 10 -1 . Combining with the world average $\mathscr{B}$(Λ$^+_c$ → p⁢K$^0_S$), we have the absolute branching fractions, $\mathscr{B}$(Λ$^+_c$ → p⁢K$^0_S$K$^0_S$) = (2.35 ± 0.12 ± 0.07 ± 0.12) × 10 -4 and $\mathscr{B}$(Λ$^+_c$ → p⁢K$^0_S$η) = (4.35 ± 0.10 ± 0.20 ± 0.22) × 10 -3 . The first and second uncertainties are statistical and systematic, respectively, while the third ones arise from the uncertainty on $\mathscr{B}$(Λ$^+_c$ → p⁢K$^0_S$). The mode Λ$^+_c$ → p⁢K$^0_S$K$^0_S$ is observed for the first time and has a statistical significance of >10σ. The branching fraction of Λ$^+_c$ → p⁢K$^0_S$η has been measured with a threefold improvement in precision over previous results and is found to be consistent with the world average.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Recycling polyolefin plastic waste at short contact times via rapid joule heating

Abstract The chemical deconstruction of polyolefins to fuels, lubricants, and waxes offers a promising strategy for mitigating their accumulation in landfills and the environment. Yet, achieving true recyclability of polyolefins into C 2 -C 4 monomers with high yields, low energy demand, and low carbon dioxide emissions under realistic polymer-to-catalyst ratios remains elusive. Here, we demonstrate a single-step electrified approach utilizing Rapid Joule Heating over an H-ZSM-5 catalyst to efficiently deconstruct polyolefin plastic waste into light olefins (C 2 -C 4 ) in milliseconds, with high productivity at much higher polymer-to-catalyst ratio than prior work. The catalyst is essential in producing a narrow distribution of light olefins. Pulsed operation and steam co-feeding enable highly selective deconstruction (product fraction of >90% towards C 2 -C 4 hydrocarbons) with minimal catalyst deactivation compared to Continuous Joule Heating. This laboratory-scale approach demonstrates effective deconstruction of real-life waste materials, resilience to additives and impurities, and versatility for circular polyolefin plastic waste management.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗