Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FISSION PRODUCT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Background and Derivation of ANS-5.4 Standard Fission Product Release Model

This background report describes the technical basis for the newly proposed American Nuclear Society (ANS) 5.4 standard, Methods for Calculating the Fractional Release of Volatile Fission Products from Oxide Fuels. The proposed ANS 5.4 standard provides a methodology for determining the radioactive fission product releases from the fuel for use in assessing radiological consequences of postulated accidents that do not involve abrupt power transients. When coupled with isotopic yields, this method establishes the "gap activity," which is the inventory of volatile fission products that are released from the fuel rod if the cladding is breached. Best-estimate and conservative upper-bound 95/95 tolerance models for predicting the release of volatile radioactive isotopes of krypton, xenon, and iodine are described. The isotope that provides the most significant contribution to equivalent dose to individuals is generally I-131 for accidents that occur during in-reactor operation or shortly after reactor operation (e.g., the fuel-handling accident) due to its dose to the thyroid. The existing conservative upper-bound model for predicting the I-131 release has been shown to be very conservative in comparison to the available measured release data for I-131. The 2009 model proposed herein predicts up to a factor of 2 lower release than the old ANS 5.4 release model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Correlation between Asian Dust and Specific Radioactivities of Fission Products Included in Airborne Samples in Tokushima, Shikoku Island, Japan, Due to the Fukushima Nuclear Accident

Radioactive fission product {sup 131}I released from the Fukushima Daiichi Nuclear Power Plants (FD-NPP) was first detected on March 23, 2011 in an airborne aerosol sample collected at Tokushima, Shikoku Island, located in western Japan. Two other radioactive fission products, {sup 134}Cs and {sup 137}Cs were also observed in a sample collected from April 2 to 4, 2011. The maximum specific radioactivities observed in this work were about 2.5 to 3.5 mBq×m{sup -3} in a airborne aerosol sample collected on April 6. During the course of the continuous monitoring, we also made our first observation of seasonal Asian Dust and those fission products associated with the FDNPP accident concurrently from May 2 to 5, 2011. We found that the specific radioactivities of {sup 134}Cs and {sup 137}Cs decreased drastically only during the period of Asian Dust. And also, it was found that this trend was very similar to the atmospheric elemental concentration (ng×m{sup -3}) variation of stable cesium ({sup 133}Cs) quantified by elemental analyses using our developed ICP-DRC-MS instrument.

54 ENVIRONMENTAL SCIENCES↗

Exploratory study of fission product yield determination from photofission of Pu 239 at 11 MeV with monoenergetic photons

Here, measurements of fission product yields play an important role for the understanding of fundamental aspects of the fission process. Recently, neutron-induced fission product-yield data of 239 Pu at energies below 4 MeV revealed an unexpected energy dependence of certain fission fragments. In order to investigate whether this observation is prerogative to neutron-induced fission, a program has been initiated to measure fission product yields in photoinduced fission. Here we report on the first ever photofission product yield measurement with monoenergetic photons produced by Compton back-scattering of FEL photons. The experiment was performed at the High-Intensity Gamma-ray Source at Triangle Universities Nuclear Laboratory on 239 Pu at E γ = 11 MeV. In this exploratory study the yield of eight fission products ranging from 91 Sr to 143 Ce has been obtained.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Product Inventory and Burnup Evaluation of the AGR-2 Irradiation by Gamma Spectrometry

Gamma spectrometry has been used to evaluate the burnup and fission product inventory of different components from the US Advanced Gas Reactor Fuel Development and Qualification Program's second TRISO-coated particle fuel irradiation test (AGR-2). TRISO fuel in this irradiation included both uranium carbide / uranium oxide (UCO) kernels and uranium oxide (UO2) kernels. Four of the 6 capsules contained fuel from the US Advanced Gas Reactor program, and only those capsules will be discussed in this work. The inventories of gamma-emitting fission products from the fuel compacts, graphite compact holders, graphite spacers and test capsule shell were evaluated. These data were used to measure the fractional release of fission products such as Cs-137, Cs-134, Eu-154, Ce-144, and Ag-110m from the compacts. The fraction of Ag-110m retained in the compacts ranged from 1.8% to full retention. Additionally, the activities of the radioactive cesium isotopes (Cs-134 and Cs-137) have been used to evaluate the burnup of all US TRISO fuel compacts in the irradiation. The experimental burnup evaluations compare favorably with burnups predicted from physics simulations. Predicted burnups for UCO compacts range from 7.26 to 13.15 % fission per initial metal atom (FIMA) and 9.01 to 10.69 % FIMA for UO2 compacts. Measured burnup ranged from 7.3 to 13.1 % FIMA for UCO compacts and 8.5 to 10.6 % FIMA for UO2 compacts. Results from gamma emission computed tomography performed on compacts and graphite holders that reveal the distribution of different fission products in a component will also be discussed. Gamma tomography of graphite holders was also used to locate the position of TRISO fuel particles suspected of having silicon carbide layer failures that lead to in-pile cesium release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermochemically-informed mass transport model for interdiffusion of U and Zr in irradiated U-Pu-Zr fuel with fission products

A new formulation for redistribution of constituents in metallic U-Pu-Zr nuclear fuel is presented that can incorporate the contributions from fission products. The formulation is based on the thermodynamic driving forces derived from the generalized chemical potential that includes effects of composition and temperature. As a result, the redistribution model can readily account for the composition changes due to the generation of fission products while using only a limited set of transport coefficients. The thermodynamic model for the metallic fuel and thermochemistry solver Thermochimica were coupled with the nuclear fuel performance code BISON to implement the redistribution model. The simulations reproduce an experimentally observed Zr-depletion zone in the mid-radius region of an irradiated fuel slug. The generation of fission products during burnup is shown to have a stabilizing effect on the fuel chemistry, slowing the rate of U-Zr interdiffusion and reducing the size of the Zr-depleted zone. Here, the overall objective of the work is to advance predictive capabilities of fission product behaviour in U-Zr metallic fuel in the context of fuel performance and safety.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

MICRO/NANO-STRUCTURAL EXAMINATION AND FISSION PRODUCT IDENTIFICATION IN NEUTRON IRRADIATED AGR-1 TRISO FUEL

Advanced microscopic and microanalysis techniques were developed and applied to study irradiation effects and fission product behavior in selected low-enriched uranium oxide/uranium carbide TRISO-coated particles from fuel compacts in six capsules irradiated to burnups of 11.2 to 19.6% FIMA. Although no TRISO coating failures were detected during the irradiation, the fraction of Ag-110m retained in individual particles often varied considerably within a single compact and at the capsule level. At the capsule level Ag-110m release fractions ranged from 1.2 to 38% and within a single compact, silver release from individual particles often spanned a range that extended from 100% retention to nearly 100% release. In this paper, selected irradiated particles from Baseline, Variant 1 and Variant 3 type fueled TRISO coated particles were examined using Scanning Electron Microscopy, Atom Probe Tomography; Electron Energy Loss Spectroscopy; Precession Electron Diffraction, Transmission Electron Microscopy, Scanning Transmission Electron Microscopy (STEM), High Resolution Electron Microscopy (HRTEM) examinations and Electron Probe Micro-Analyzer. Particle selection in this study allowed for comparison of the fission product distribution with Ag retention, fuel type and irradiation level. Nano sized Ag-containing features were predominantly identified in SiC grain boundaries and/or triple points in contrast with only two sitings of Ag inside a SiC grain in two different compacts (Baseline and Variant 3 fueled compacts). STEM and HRTEM analysis showed evidence of Ag and Pd co-existence in some cases and it was found that fission product precipitates can consist of multiple or single phases. STEM analysis also showed differences in precipitate compositions between Baseline and Variant 3 fuels. A higher density of fission product precipitate clusters were identified in the SiC layer in particles from the Variant 3 compact compared with the Variant 1 compact. Trend analysis shows precipitates were randomly distributed along the perimeter of the IPyC-SiC interlayer but only weakly associated with kernel protrusion and buffer fractures. There has been no evidence that the general release of silver is related to cracks or significant degradation of the microstructure. The results presented in this paper provide new insights to Ag transport mechanism(s) in intact SiC layer of TRISO coated particles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Energy Dependent Fission Product Yields

Since 2011, the LLNL-LANL-TUNL collaboration has undertaken experimental measurements of the energy evolution of the chain fission product yields (FPY) from neutron-induced fission of 235 U, 238 U, and 239 Pu using quasi-monoenergetic neutrons produced at the TUNL 10 MV Van de Graaff accelerator. Our method relies on direct, post-irradiation γ-ray spectroscopy of γ-rays emitted by fission products in actinide targets, with multiple γ-ray spectra taken continuously for a period from a half-hour to three months from the end of irradiation. The main experimental results of this study have been published for eight incident neutron energies of En = 0.58, 1.37, 2.37, 3.6, 4.6, 5.5, 8.9 and 14.8 MeV [1–4]. For each incident energy, approximately 16 cumulative FPYs were determined, nearly all being high-yield fission products, i.e., those occurring in the peaks of the mass distributions. As will be described in this report, our FPY analysis has been significantly improved in every step of the process, reducing the overall systematic uncertainties compared to previously published data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission product distribution in irradiated safety-tested and as-irradiated AGR-2 TRISO particles

In this work, two tristructural isotropic (TRISO)-coated nuclear fuel particles were examined by electron probe microanalysis (EPMA) as part of the Advanced Gas Reactor program. The compacts’ average irradiation temperatures ranged from approximately 1260 to 1290 °C. One particle was examined in the as-irradiated condition, while the other was subject to 1600 °C post-irradiation safety testing. This study was undertaken to test a newly-developed EPMA technique to determine fission product masses in TRISO particles on a layer-by-layer basis, and to compare fission product distributions between an as-irradiated and safety-tested particle. Fission product concentration profiles were collected along two radii in each particle, with measured concentrations used to compute the fission product mass in each TRISO particle layer. These measured masses were then compared to those predicted from ORIGEN modeling calculations. Data collected from these measurements show that for these two particles, masses determined via EPMA were within ± 20% of the calculated masses for the rare-earth elements, Mo, Zr, Cs, I, and Pd. Elements that tend to be less homogeneously distributed include Sr, Te, Eu, Ag, and possibly Ba. Measured Ag masses differed by more than 40% from the calculated mass. Lanthanides other than Eu remain primarily within the fuel kernel in the as-irradiated particle but in the safety-tested particle these element masses were divided approximately equally between the kernel and kernel periphery. In both particles, the majority of Sr and Eu accumulated in the carbon-rich kernel periphery, although in the safety-tested particle, Sr and Eu accumulated farther from the fuel kernel than occurred with irradiation alone. A greater mass fraction of mobile elements, such as Cs and I accumulated in the buffer and IPyC in the safety-tested particle as compared to the as-irradiated particle. When fully developed and tested, this mass balance approach to TRISO particle analysis has the potential to provide insight into fuel behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fission product yields from the 238 U ( n,f ) reaction at E n = 4.6 MeV

Here, we present cumulative fission product yields from the 238 U (n, f) reaction at an incident energy of 4.6 MeV for fission products with half-lives from less than one second to several hours. We employed direct γ-ray spectroscopy to measure unseparated fission products with a conventional neutron activation analysis and a cyclic activation technique using the RApid Belt-driven Irradiated Target Transfer System (RABITTS). Yields were determined for 78 isotopes and isomers, covering the mass range 84 ≤ A ≤ 148 and the charge range from 33(As) ≤ Z ≤ 58(Ce). Our experimental cumulative yields are compared to the literature and evaluated data at E n ≈0.5 MeV from ENDF/B-VIII.0 and JEFF-3.3 libraries and with theoretical models using the GEF and FREYA codes at E n =4.6 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Product Yields of {sup 233}U, {sup 235}U, {sup 238}U and {sup 239}Pu in Fields of Thermal Neutrons, Fission Neutrons and 14.7-MeV Neutrons

The yields of more than fifteen fission products have been carefully measured using radiochemical techniques, for {sup 235}U(n,f), {sup 239}Pu(n,f) in a thermal spectrum, for {sup 233}U(n,f), {sup 235}U(n,f), and {sup 239}Pu(n,f) reactions in a fission neutron spectrum, and for {sup 233}U(n,f), {sup 235}U(n,f), {sup 238}U(n,f), and {sup 239}Pu(n,f) for 14.7 MeV monoenergetic neutrons. Irradiations were performed at the EL3 reactor, at the Caliban and Prospero critical assemblies, and at the Lancelot electrostatic accelerator in CEA-Valduc. Fissions were counted in thin deposits using fission ionization chambers. The number of fission products of each species were measured by gamma spectrometry of co-located thick deposits.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Identifying Inconsistencies in Fission Product Yield Evaluations with Prompt Neutron Emission

Here, we present a self-consistency analysis of fission product yield evaluations. Anomalous yields are determined using a series of simple conservation checks and comparing charge distributions with common parameterizations. The summed average prompt neutron multiplicity for both products as a function of the heavy product mass is derived directly from the independent fission product yields with a procedure utilizing average charge conservation. This procedure is validated with Monte Carlo simulations of the de-excitation of the fission fragments in a Hauser-Feshbach statistical decay framework. The derived is compared with experimental data, when available, and then used to determine the prompt neutron multiplicity for the various evaluations. The propagated errors on from the average charge conservation method are significantly lower than the simple summation rules, which reveals that some evaluations are inconsistent with prompt neutron data. We propose possible solutions to remedy the observed inconsistencies and identify sources of the observed differences in between the various evaluation libraries.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Product Transport in TRISO Particles and Pebbles

This document demonstrates completion of the goals described in the technical narrative of the FOA project titled: ”Modeling and Simulation Development Pathways to Accelerating KP-FHR Licensing” regarding fission product transport in the Kairos-proposed fuel pebble by INL and Kairos Power. Showcased in this report are code developments and simulations in BISON that extend the state of the art in computation and understanding of fission product transport in a TRISO fuel particle and pebble. These enhancements lay the foundation for making predictions of fission product transport that can be used as input in the fuel licensing process. This was achieved by installing existing fuel material models originally used in PARFUME, developing a new failure probability method that is efficient and multi-dimensional, employing material homogenization, and expanding verification and validation simulations to demonstrate the efficacy of the work. All this work is leveraged to spotlight the main deliverable; a three-dimensional model and corresponding demonstration simulation of a pebble, which will serve as the starting point for models used to predict fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fission Product Transport in TRISO Particles and Pebbles

This document demonstrates completion of the goals described in the technical narrative of the FOA project titled: ”Modeling and Simulation Development Pathways to Accelerating KP-FHR Licensing” regarding fission product transport in the Kairos-proposed fuel pebble by INL and Kairos Power. Showcased in this report are code developments and simulations in BISON that extend the state of the art in computation and understanding of fission product transport in a TRISO fuel particle and pebble. These enhancements lay the foundation for making predictions of fission product transport that can be used as input in the fuel licensing process. This was achieved by installing existing fuel material models originally used in PARFUME, developing a new failure probability method that is efficient and multi-dimensional, employing material homogenization, and expanding verification and validation simulations to demonstrate the efficacy of the work. All this work is leveraged to spotlight the main deliverable; a three-dimensional model and corresponding demonstration simulation of a pebble, which will serve as the starting point for models used to predict fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Property Measurements of NaCl-UCl 3 and LiF-NaF-KF Molten Salts Doped with Surrogate Fission Products

Knowing thermophysical and thermochemical property values of salts over the expected range of operating temperatures is essential to modeling and simulation efforts that support the commercialization of molten salt reactor (MSR) technologies. Salt properties being measured at Argonne include thermal transitions, phase behavior, heat capacity, density, surface tension, volumetric thermal expansion, thermal diffusivity, thermal conductivity, and viscosity. The properties of several salts of interest including NaCl-UCl 3 and LiF-NaF-KF (FLiNaK) have been measured at Argonne and reported previously. These property measurements are suitable for use in evaluating reactor performance during startup and the early operating life of the reactor. The physical and chemical behavior of the fuel salt is altered by the buildup of fission products and the resulting changes in heat transfer and other properties must be understood by reactor developers. This report summarizes melting behavior, heat capacity, and thermal diffusivity values that were measured for mixtures of FLiNaK and NaCl-UCl 3 salts that have been doped with surrogate fission products. Additional heat capacity measurements were also performed on a separate mixture of FLiNaK without dopants. Measured properties are suitable for incorporation into the Molten Salt Thermal Properties Database–Thermochemical (MSTDB–TC) and the Molten Salt Thermal Properties Database–Thermophysical (MSTDB–TP) to support the development of MSRs. Salts were prepared by doping eutectic mixtures of NaCl-UCl 3 and FLiNaK with surrogate fission products. These salts were prepared for use in salt spill experiments being performed at Argonne and were subsequently used for thermal property measurements. Thermal transitions and heat capacities were measured by using differential scanning calorimetry (DSC) and thermal diffusivity was measured by using laser flash analysis (LFA) at temperatures spanning the typical MSR operating range. The measured property values of the doped salts were compared to measured property values of salts without fission products to quantify the effects of the doped fission products.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutron Cross Section Covariances for Structural Materials and Fission Products

We describe neutron cross section covariances for 78 structural materials and fission products produced for the new US evaluated nuclear reaction library ENDF/B-VII.1. Neutron incident energies cover full range from 10{sup -5} eV to 20 MeV and covariances are primarily provided for capture, elastic and inelastic scattering as well as (n,2n). The list of materials follows priorities defined by the Advanced Fuel Cycle Initiative, the major application being data adjustment for advanced fast reactor systems. Thus, in addition to 28 structural materials and 49 fission products, the list includes also {sup 23}Na which is important fast reactor coolant. Due to extensive amount of materials, we adopted a variety of methodologies depending on the priority of a specific material. In the resolved resonance region we primarily used resonance parameter uncertainties given in Atlas of Neutron Resonances and either applied the kernel approximation to propagate these uncertainties into cross section uncertainties or resorted to simplified estimates based on integral quantities. For several priority materials we adopted MF32 covariances produced by SAMMY at ORNL, modified by us by adding MF33 covariances to account for systematic uncertainties. In the fast neutron region we resorted to three methods. The most sophisticated was EMPIRE-KALMAN method which combines experimental data from EXFOR library with nuclear reaction modeling and least-squares fitting. The two other methods used simplified estimates, either based on the propagation of nuclear reaction model parameter uncertainties or on a dispersion analysis of central cross section values in recent evaluated data files. All covariances were subject to quality assurance procedures adopted recently by CSEWG. In addition, tools were developed to allow inspection of processed covariances and computed integral quantities, and for comparing these values to data from the Atlas and the astrophysics database KADoNiS.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Report on the Behavior of Fission Products in the Co-decontamination Process

This document was prepared to meet FCT level 3 milestone M3FT-15IN0302042, “Generate Zr, Ru, Mo and Tc data for the Co-decontamination Process.” This work was carried out under the auspices of the Lab-Scale Testing of Reference Processes FCT work package. This document reports preliminary work in identifying the behavior of important fission products in a Co-decontamination flowsheet. Current results show that Tc, in the presence of Zr alone, does not behave as the Argonne Model for Universal Solvent Extraction (AMUSE) code would predict. The Tc distribution is reproducibly lower than predicted, with Zr distributions remaining close to the AMUSE code prediction. In addition, it appears there may be an intricate relationship between multiple fission product metals, in different combinations, that will have a direct impact on U, Tc and other important fission products such as Zr, Mo, and Rh. More extensive testing is required to adequately predict flowsheet behavior for these variances within the fission products.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Removal of fission product tellurium and iodine from recently irradiated HEU using copper metal

Gamma detection of select fission products or activation products such as 153 Sm and 239 Np in a fission sample is difficult due to gamma interferences from radiotellurium and radioiodine. To aid in the detection of these difficult-to-detect nuclides, the radiotellurium and radioiodine were removed using Cu metal turnings. This method is highly effective at the removal of the interfering radionuclides removing > 98% of the radiotellurium and radioiodine. A mechanistic study was conducted. Determining the deposition mechanism, using a number of techniques including XANES and electrochemistry providing an understanding of the electrochemical path for the Te deposition. Initial work focused on the use of stable Te, further expanding into activated TeO 2 , and a fresh fission sample. Importantly, this method presents a rapid method for the direct detection of select fission products that could have a significant impact on nuclear related fields including nuclear forensics.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗