Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exchange correlation functionals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Influence of the van der Waals interaction in the dissociation dynamics of N{sub 2} on W(110) from first principles

Using ab initio molecular dynamics (AIMD) calculations, we investigate the role of the van der Waals (vdW) interaction in the dissociative adsorption of N{sub 2} on W(110). Hitherto, existing classical dynamics calculations performed on six-dimensional potential energy surfaces based on density functional theory (DFT), and the semi-local PW91 and RPBE [Hammer et al. Phys. Rev. B 59, 7413 (1999)] exchange-correlation functionals were unable to fully describe the dependence of the initial sticking coefficient on the molecular beam incidence conditions as found in experiments. N{sub 2} dissociation on W(110) was shown to be very sensitive not only to short molecule-surface distances but also to large distances where the vdW interaction, not included in semilocal-DFT, should dominate. In this work, we perform a systematic study on the dissociative adsorption using a selection of existing non-local functionals that include the vdW interaction (vdW-functionals). Clearly, the inclusion of the non-local correlation term contributes in all cases to correct the unrealistic energy barriers that were identified in the RPBE at large molecule-surface distances. Among the tested vdW-functionals, the original vdW-DF by Dion et al. [Phys. Rev. Lett. 92, 246401 (2004)] and the ulterior vdW-DF2 give also an adequate description of the N{sub 2} adsorption energy and energy barrier at the transition state, i.e., of the properties that are commonly used to verify the quality of any exchange-correlation functional. However, the results of our AIMD calculations, which are performed at different incidence conditions and hence extensively probe the multi-configurational potential energy surface of the system, do not seem as satisfactory as the preliminary static analysis suggested. When comparing the obtained dissociation probabilities with existing experimental data, none of the used vdW-functionals seems to provide altogether an adequate description of the N{sub 2}/W(110) interaction at short and large distances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Self-Consistent Hubbard U Density-Functional Theory Approach to the Addition-Elimination Reactions of Hydrocarbons on Bare FeO⁺

We present a detailed analysis of the addition-elimination reaction pathways for the gas-phase conversion of molecular hydrogen and methane on FeO⁺ to water and methanol, respectively, using first-principles calculations. These two reactions represent paradigmatic, challenging test cases for electronic structure approaches to transition-metal catalysis. We compare here density-functional approaches against state-of-the-art coupled-cluster and multireference quantum chemistry approaches. The quantum chemical approaches are found to be in close agreement between themselves as well as with the available experimental evidence. For the density-functional calculations, we employ a recently introduced ab initio, self-consistent Hubbard-like correction, coupled here with a generalized-gradient approximation (GGA) for the exchange-correlation functional. We find that our formulation provides a remarkable improvement in the description of the electronic structure, hybridization, and multiplet splittings for all calculated stationary points along these reaction pathways. The Hubbard term, which is not a fitting parameter and, in principle, can augment any exchange-correlation functional, brings the density-functional theory results in close agreement with the reference calculations. In particular, thermochemical errors as large as 1.4 eV in the exit channels with the GGA functional are reduced by an order of magnitude, to less than 0.1 eV on average; additionally, close agreement with the correlated-electron reference calculations and experiments are achieved for intermediate spin splittings and structures, reaction exothermicity, and spin crossovers. The role that the Hubbard U term plays in improving both quantitative and qualitative descriptions of transition-metal chemistry is examined, and its strengths as well as possible weaknesses are discussed in detail.

03 NATURAL GAS↗

Analyzing the errors of DFT approximations for compressed water systems

We report an extensive study of the errors of density functional theory (DFT) approximations for compressed water systems. The approximations studied are based on the widely used PBE and BLYP exchange-correlation functionals, and we characterize their errors before and after correction for 1- and 2-body errors, the corrections being performed using the methods of Gaussian approximation potentials. The errors of the uncorrected and corrected approximations are investigated for two related types of water system: first, the compressed liquid at temperature 420 K and density 1.245 g/cm{sup 3} where the experimental pressure is 15 kilobars; second, thermal samples of compressed water clusters from the trimer to the 27-mer. For the liquid, we report four first-principles molecular dynamics simulations, two generated with the uncorrected PBE and BLYP approximations and a further two with their 1- and 2-body corrected counterparts. The errors of the simulations are characterized by comparing with experimental data for the pressure, with neutron-diffraction data for the three radial distribution functions, and with quantum Monte Carlo (QMC) benchmarks for the energies of sets of configurations of the liquid in periodic boundary conditions. The DFT errors of the configuration samples of compressed water clusters are computed using QMC benchmarks. We find that the 2-body and beyond-2-body errors in the liquid are closely related to similar errors exhibited by the clusters. For both the liquid and the clusters, beyond-2-body errors of DFT make a substantial contribution to the overall errors, so that correction for 1- and 2-body errors does not suffice to give a satisfactory description. For BLYP, a recent representation of 3-body energies due to Medders, Babin, and Paesani [J. Chem. Theory Comput. 9, 1103 (2013)] gives a reasonably good way of correcting for beyond-2-body errors, after which the remaining errors are typically 0.5 mE{sub h} ≃ 15 meV/monomer for the liquid and the clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional theory for d- and f-electron materials and compounds

Here, the fundamental requirements for a computationally tractable Density Functional Theory-based method for relativistic f- and (nonrelativistic) d-electron materials and compounds are presented. The need for basing the Kohn–Sham equations on the Dirac equation is discussed. The full Dirac scheme needs exchange-correlation functionals in terms of four-currents, but ordinary functionals, using charge density and spin-magnetization, can be used in an approximate Dirac treatment. The construction of a functional that includes the additional confinement physics needed for these materials is illustrated using the subsystem-functional scheme. If future studies show that a full Dirac, four-current based, exchange-correlation functional is needed, the subsystem functional scheme is one of the few schemes that can still be used for constructing functional approximations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Barrierless association of CF 2 and dissociation of C 2 F 4 by variational transition-state theory and system-specific quantum Rice–Ramsperger–Kassel theory

Bond dissociation is a fundamental chemical reaction, and the first principles modeling of the kinetics of dissociation reactions with a monotonically increasing potential energy along the dissociation coordinate presents a challenge not only for modern electronic structure methods but also for kinetics theory. In this work, we use multifaceted variable-reaction-coordinate variational transition-state theory (VRC-VTST) to compute the high-pressure limit dissociation rate constant of tetrafluoroethylene (C 2 F 4 ), in which the potential energies are computed by direct dynamics with the M08-HX exchange correlation functional. To treat the pressure dependence of the unimolecular rate constants, we use the recently developed system-specific quantum Rice–Ramsperger–Kassel theory. The calculations are carried out by direct dynamics using an exchange correlation functional validated against calculations that go beyond coupled-cluster theory with single, double, and triple excitations. In conclusion, our computed dissociation rate constants agree well with the recent experimental measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance of DFT Methods in the Calculation of Optical Spectra of TCF-Chromophores

We present electronic structure calculations of the ultraviolet/visible (UV-Vis) spectra of highly active push-pull chromophores containing tricyanofuran (TCF) acceptor group. In particular, we have applied the recently developed long-range corrected Baer-Neuhauser-Livshits (BNL) exchange-correlation functional. The performance of this functional compares favorably with other density functional theory (DFT) approaches, including the CAM-B3LYP functional. The accuracy of UV-Vis results for these molecules is best at low values of attenuation parameters (γ) for both BNL and CAM-B3LYP functionals. The optimal value of γ is different for the charge-transfer (CT) and π-π* excitations. The BNL and PBE0 exchange correlation functionals capture the CT states particularly well while the π-π* excitations are less accurate and system dependent. Chromophore conformations, which considerably affect the molecular hyperpolarizability, do not significantly influence the UV-Vis spectra on average. As expected, the color of chromophores is a sensitive function of modifications to its conjugated framework, and is not significantly affected by increasing aliphatic chain length linking a chromophore to a polymer. For selected push-pull aryl-chromophores, we find a significant dependence of absorption spectra on the strength of diphenylaminophenyl donors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative study of Minnesota functionals performance on ferroelectric BaTiO 3 and PbTiO 3

Density functional theory based simulations are the leading tool for the computational investigation of ferroelectrics and the parametrization of their classical potentials. However, the predictions often depend strongly on the exchange correlation functional. The most popular choices, LDA and GGA, tend to underestimate or overestimate some structural, electric, and energy properties. These impede development of highly accurate classical potentials that extend the reach of first-principles simulations to finite temperatures and realistic sizes. In this work, we investigate the performance of recently developed Minnesota exchange correlation functionals on prototypical ferroelectrics BaTiO 3 , and PbTiO 3 , in comparison with some popular ones. We find that there exists strong correlation between predictions for some properties (tetragonality, phase energy difference, and polarization) by different functionals. Along the correlation line, we find a range of functionals (including some from the Minnesota suite) whose predictions fall in between those of LDA and GGA and, therefore, offer an improvement. A way to relatively rank functional performance with respect to chosen benchmarks is proposed and applied to identify the top performers for BaTiO 3 and PbTiO 3 . Here, the performance is found to be material dependent. Therefore, we propose that the performance assessment carried out in this work is employed to "screen" functionals prior to their use on ferroelectrics. Quick and computationally inexpensive, it is likely to lead to improved descriptions, especially for classical potential parametrization. The Minnesota functional suite is found to be suitable for this task.

36 MATERIALS SCIENCE↗

From one to three, exploring the rungs of Jacob’s ladder in magnetic alloys

Magnetic systems represent an important challenge for electronic structure methods, in particular Density Functional Theory (DFT), which uses a single determinant wavefunction. To assess the predictions obtained by DFT in this type of materials, we benchmark different exchange correlation functionals with respect to each other, and with respect to available experimental data, on two families of binary iron alloys which are metallic and magnetic. We climb three rungs in Jacob’s ladder of DFT (i) the local density approximation, (ii) the industry standard approximation due to Perdew, Burke and Ernzerhof, and the revised version for solids, PBEsol (iii) and finally a very accurate meta-GGA functional SCAN, which corresponds to the third rung. More than 350 structures in ferromagnetic and antiferromagnetic configurations were considered. We compare the Convex Hull, the calculated magnetic moment, crystal structure, formation energy and electronic gap if present. We conclude that none of the functionals work in all conditions: whereas PBE and PBEsol can give a fair description of the crystal structure and the energetics, SCAN strongly overestimates the formation energy – giving values which are at least twice as large as PBE (and experiment). Magnetic moments are better predicted by PBE as well. Finally, our results show that magnetic and strongly correlated materials are a tough litmus test for DFT, and that they represent the next frontier in the development of a truly universal exchange correlation functionals.

Romero, Aldo H.↗

Predicting the thermodynamic stability of double-perovskite halides from density functional theory

Recently, a series of double-perovskite halide compounds such as Cs 2 AgBiCl 6 and Cs 2 AgBiBr 6 have attracted intensive interest as promising alternatives to the solar absorber material CH 3 NH 3 PbI 3 because they are Pb-free and may exhibit enhanced stability. The thermodynamic stability of a number of double-perovskite halides has been predicted based on density functional theory (DFT) calculations of compound formation energies. In this paper, we found that the stability prediction can be dependent on the approximations used for the exchange-correlation functionals, e.g., the DFT calculations using the widely used Perdew, Burke, Ernzerhof (PBE) functional predict that Cs 2 AgBiBr 6 is thermodynamically unstable against phase-separation into the competing phases such as AgBr, Cs 2 AgBr 3 , Cs 3 Bi 2 Br 9 , etc., obviously inconsistent with the good stability observed experimentally. The incorrect prediction by the PBE calculation results from its failure to predict the correct ground-state structures of AgBr, AgCl, and CsCl. By contrast, the DFT calculations based on local density approximation, optB86b-vdW, and optB88-vdW functionals predict the ground-state structures of these binary halides correctly. Furthermore, the optB88-vdW functional is found to give the most accurate description of the lattice constants of the double-perovskite halides and their competing phases. Given these two aspects, we suggest that the optB88-vdW functional should be used for predicting thermodynamic stability in the future high-throughput computational material design or the construction of the Materials Genome database for new double-perovskite halides. As a result, using different exchange-correlation functionals has little influence on the dispersion of the conduction and the valence bands near the electronic bandgap; however, the calculated bandgap can be affected indirectly by the optimized lattice constant, which varies for different functionals.

36 MATERIALS SCIENCE↗

Functional Independent Scaling Relation for ORR/OER Catalysts

A widely used adsorption energy scaling relation between OH* and OOH* intermediates in the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), has previously been determined using density functional theory and shown to dictate a minimum thermodynamic overpotential for both reactions. Here, we show that the oxygen–oxygen bond in the OOH* intermediate is, however, not well described with the previously used class of exchange-correlation functionals. By quantifying and correcting the systematic error, an improved description of gaseous peroxide species versus experimental data and a reduction in calculational uncertainty is obtained. For adsorbates, we find that the systematic error largely cancels the vdW interaction missing in the original determination of the scaling relation. An improved scaling relation, which is fully independent of the applied exchange–correlation functional, is obtained and found to differ by 0.1 eV from the original. Lastly, this largely confirms that, although obtained with a method suffering from systematic errors, the previously obtained scaling relation is applicable for predictions of catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and dynamics of aqueous solutions from PBE-based first-principles molecular dynamics simulations

Establishing an accurate and predictive computational framework for the description of complex aqueous solutions is an ongoing challenge for density functional theory based first-principles molecular dynamics (FPMD) simulations. In this context, important advances have been made in recent years, including the development of sophisticated exchange-correlation functionals. On the other hand, simulations based on simple generalized gradient approximation (GGA) functionals remain an active field, particularly in the study of complex aqueous solutions due to a good balance between the accuracy, computational expense, and the applicability to a wide range of systems. In such simulations we often perform them at elevated temperatures to artificially “correct” for GGA inaccuracies in the description of liquid water; however, a detailed understanding of how the choice of temperature affects the structure and dynamics of other components, such as solvated ions, is largely unknown. In order to address this question, we carried out a series of FPMD simulations at temperatures ranging from 300 to 460 K for liquid water and three representative aqueous solutions containing solvated Na + , K + , and Cl - ions. We show that simulations at 390–400 K with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional yield water structure and dynamics in good agreement with experiments at ambient conditions. Simultaneously, this computational setup provides ion solvation structures and ion effects on water dynamics consistent with experiments. These results suggest that an elevated temperature around 390–400 K with the PBE functional can be used for the description of structural and dynamical properties of liquid water and complex solutions with solvated ions at ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

mBEEF-vdW: Robust fitting of error estimation density functionals

Here, we propose a general-purpose semilocal/nonlocal exchange-correlation functional approximation, named mBEEF-vdW. The exchange is a meta generalized gradient approximation, and the correlation is a semilocal and nonlocal mixture, with the Rutgers-Chalmers approximation for van der Waals (vdW) forces. The functional is fitted within the Bayesian error estimation functional (BEEF) framework. We improve the previously used fitting procedures by introducing a robust MM-estimator based loss function, reducing the sensitivity to outliers in the datasets. To more reliably determine the optimal model complexity, we furthermore introduce a generalization of the bootstrap 0.632 estimator with hierarchical bootstrap sampling and geometric mean estimator over the training datasets. Using this estimator, we show that the robust loss function leads to a 10% improvement in the estimated prediction error over the previously used least-squares loss function. The mBEEF-vdW functional is benchmarked against popular density functional approximations over a wide range of datasets relevant for heterogeneous catalysis, including datasets that were not used for its training. Overall, we find that mBEEF-vdW has a higher general accuracy than competing popular functionals, and it is one of the best performing functionals on chemisorption systems, surface energies, lattice constants, and dispersion. We also show the potential-energy curve of graphene on the nickel(111) surface, where mBEEF-vdW matches the experimental binding length. mBEEF-vdW is currently available in gpaw and other density functional theory codes through Libxc, version 3.0.0.

36 MATERIALS SCIENCE↗

Ab initio DFT+U Study of He Atom Incorporation into UO2 Crystals

We present and discuss results of the density functional theory (DFT) for perfect UO2 crystals with He atoms in octahedral interstitial positions therein. We have calculated basic bulk crystal properties and He incorporation energies into the low temperature anti-ferromagnetic UO2 phase using several exchange–correlation functionals within the spin-polarized local density (LDA) and generalized gradient (GGA) approximations. In all DFT calculations we included the on-site correlation corrections using the Hubbard model (DFT+U approach). We analysed a potential crystalline symmetry reduction from tetragonal down to orthorhombic structure and confirmed the presence of the Jahn–Teller effect in a perfect UO2. We discuss also the problem of a conducting electronic state arising when He is placed into a tetragonal antiferromagnetic phase of UO2 commonly used in defect modelling. Consequently, we found a specific monoclinic lattice distortion which allowed us to restore the semiconducting state and properly estimate He incorporation energies. Unlike the bulk properties, the He incorporation energy strongly depends on several factors, including the supercell size, the use of spin polarization, the exchange–correlation functionals and on-site correlation corrections. We compare our results for the He incorporation with the previous shell model and ab initio DFT calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The double-soft limit in cosmological correlation functions and graviton exchange effects

The graviton exchange effect on cosmological correlation functions is examined by employing the double-soft limit technique. A new relation among correlation functions that contain the effects due to graviton exchange diagrams in addition to those due to scalar-exchange and scalar-contact-interaction, is derived by using the background field method and independently by the method of Ward identities associated with dilatation symmetry. We compare these three terms, putting small values for the slow-roll parameters and (1− n {sub s} ) ≈ 0.042, where n {sub s} is the scalar spectral index. It is argued that the graviton exchange effects are more dominant than the other two and could be observed in the trispectrum in the double-soft limit. Our observation strengthens the previous work by Seery, Sloth and Vernizzi, in which it has been argued that the graviton exchange dominates in the counter-collinear limit for single field slow-roll inflation.

79 ASTRONOMY AND ASTROPHYSICS↗

Reliable Modeling of the Electronic Spectra of Realistic Uranium Complexes

We present an EOMCCSD (equation of motion coupled cluster with singles and doubles) study of excited states of the small [UO2]2+ and [UO2]+ model systems as well as the larger UV IO2(saldien) complex. In addition, the triples contribution within the EOMCCSDT and CR-EOMCCSD(T) (completely renormalized EOMCCSD with non-iterative triples) approaches for the [UO2]2+ and [UO2]+ systems as well as the active-space variant of the CR-EOMCCSD(T) method | CREOMCCSd(t) | for the UV IO2(saldien) molecule are investigated. The coupled cluster data was employed as benchmark to chose the "best" appropriate exchange--correlation functional for subsequent time-dependent density functional (TD-DFT) studies on the transition energies for closed-shell species. Furthermore, the influence of the saldien ligands on the electronic structure and excitation energies of the [UO2]+ molecule is discussed. The electronic excitations as well as their oscillator dipole strengths modeled with TD-DFT approach using the CAM-B3LYP exchange{correlation functional for the [UV O2(saldien)]- with explicit inclusion of two DMSOs are in good agreement with the experimental data of Takao et al. [Inorg. Chem. 49, 2349-2359, (2010)].

Environmental Molecular Sciences Laboratory↗

Components of the Bond Energy in Polar Diatomic Molecules, Radicals, and Ions Formed by Group-1 and Group-2 Metal Atoms

While many transition metal complexes are known to have high multireference character, the multireference character of main-group closed-shell singlet diatomic molecules like BeF, CaO, and MgO has been less studied. Yet, many group-1 and group-2 diatomic molecules do have multireference character, and they provide informative systems for studying multireference character because they are simpler than transition metal compounds. The goal of the present work is to understand these multireference systems better so that, ultimately, we can apply what we learn to more complicated multireference systems and to the design of new exchange-correlation functionals for treating multireference systems more adequately. Fourteen main-group diatomic molecules and one triatomic molecule (including radicals, cations, and anions, as well as neutral closed-shell species) have been studied for this article. Eight of these molecules contain a group-1 element, and six contain a group-2 element. Seven of these molecules are multireference systems, and eight of them are single-reference systems. Fifty-three exchange-correlation functionals of 11 types [local spin-density approximation (LSDA), generalized gradient approximation (GGA), nonseparable gradient approximation (NGA), global-hybrid GGA, meta-GGA, meta-NGA, global-hybrid meta GGA, range-separated hybrid GGA, range-separated hybrid meta-GGA, range-separated hybrid meta-NGA, and DFT augmented with molecular mechanics damped dispersion (DFT-D)] and the Hartree–Fock method have been applied to calculate the bond distance, bond dissociation energy (BDE), and dipole moment of these molecules. All of the calculations are converged to a stable solution by allowing the symmetry of the Slater determinant to be broken. A reliable functional should not only predict an accurate BDE but also predict accurate components of the BDE, so each bond dissociation energy has been decomposed into ionization potential (IP) of the electropositive element, electron affinity of the electronegative bonding partner (EA), atomic excitation energy (EE) to prepare the valence states of the interacting partners, and interaction energy (IE) of the valence-prepared states. Adding Hartree–Fock exchange helps to obtain better results for atomic excitation energy, and this leads to improvements in getting the right answer for the right reason. The following functionals are singled out for reasonably good performance on all three of bond distance, BDE, and dipole moment: B97-1, B97-3, MPW1B95, M05, M06, M06-2X, M08-SO, N12-SX, O3LYP, TPSS, τ-HCTHhyb, and GAM; all but two (TPSS and GAM) of these functionals are hybrid functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calculating Hugoniots for molecular crystals from first principles.

Density Functional Theory (DFT) has over the last few years emerged as an indispensable tool for understanding the behavior of matter under extreme conditions. DFT based molecular dynamics simulations (MD) have for example confirmed experimental findings for shocked deuterium, enabled the first experimental evidence for a triple point in carbon above 850 GPa, and amended experimental data for constructing a global equation of state (EOS) for water, carrying implications for planetary physics. The ability to perform high-fidelity calculations is even more important for cases where experiments are impossible to perform, dangerous, and/or prohibitively expensive. For solid explosives, and other molecular crystals, similar success has been severely hampered by an inability of describing the materials at equilibrium. The binding mechanism of molecular crystals (van der Waals forces) is not well described within traditional DFT. Among widely used exchange-correlation functionals, neither LDA nor PBE balances the strong intra-molecular chemical bonding and the weak inter-molecular attraction, resulting in incorrect equilibrium density, negatively affecting the construction of EOS for undetonated high explosives. We are exploring a way of bypassing this problem by using the new Armiento-Mattsson 2005 (AM05) exchange-correlation functional. The AM05 functional is highly accurate for a wide range of solids, in particular in compression. In addition, AM05 does not include any van der Waals attraction, which can be advantageous compared to other functionals: Correcting for a fictitious van der Waals like attraction with unknown origin can be harder than correcting for a complete absence of all types of van der Waals attraction. We will show examples from other materials systems where van der Waals attraction plays a key role, where this scheme has worked well, and discuss preliminary results for molecular crystals and explosives.

36 MATERIALS SCIENCE↗

Simulations of x-ray absorption spectra for CO desorbing from Ru(0001) with transition-potential and time-dependent density functional theory approaches

The desorption of a carbon monoxide molecule from a Ru(0001) surface was studied by means of X-ray Absorption Spectra (XAS) computed with Transition Potential (TP-DFT) and Time Dependent (TD-DFT) DFT methods. By unraveling the evolution of the CO electronic structure upon desorption, we observed that at 2.3 Å from the surface, the CO molecule has already predominantly gas-phase character. While C 1s XAS is quite insensitive to changes in the C–O bond length, the O 1s excitation is very sensitive with the π* coming down in energy upon CO bond stretching, which competes with the increase in orbital energy due to the repulsive interaction with the metallic surface. We show in a systematic way that the TP-DFT method can describe the XAS rather well at the endpoints (chemisorbed and gas phase) but is affected by artificial charge transfer and/or incorrect spin treatment in the transition region in cases like CO, where there are low-lying π* orbitals and large exchange interactions between the core 1s and valence-acceptor π* orbitals. As an alternative, we demonstrate by comparing with experimental data that a linear response approach using TD-DFT employing common exchange-correlation functionals and finite-size clusters can yield a good description of the spectral evolution of the 1s → π* transition with correct spin and gas-to-chemisorbed chemical shifts in good agreement with experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗