Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ensemble models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Model Evaluation of Short-Lived Climate Forcers for the Arctic Monitoring and Assessment Programme: A Multi-Species, Multi-Model Study

While carbon dioxide is the main cause for global warming, modeling short-lived climate forcers (SLCFs) such as methane, ozone, and particles in the Arctic allows us to simulate near-term climate and health impacts for a sensitive, pristine region that is warming at 3 times the global rate. Atmospheric modeling is critical for understanding the long-range transport of pollutants to the Arctic, as well as the abundance and distribution of SLCFs throughout the Arctic atmosphere. Modeling is also used as a tool to determine SLCF impacts on climate and health in the present and in future emissions scenarios. In this study, we evaluate 18 state-of-the-art atmospheric and Earth system models by assessing their representation of Arctic and Northern Hemisphere atmospheric SLCF distributions, considering a wide range of different chemical species (methane, tropospheric ozone and its precursors, black carbon, sulfate, organic aerosol, and particulate matter) and multiple observational datasets. Model simulations over 4 years (2008-2009 and 2014-2015) conducted for the 2022 Arctic Monitoring and Assessment Programme (AMAP) SLCF assessment report are thoroughly evaluated against satellite, ground, ship, and aircraft-based observations. The annual means, seasonal cycles, and 3-D distributions of SLCFs were evaluated using several metrics, such as absolute and percent model biases and correlation coefficients. The results show a large range in model performance, with no one particular model or model type performing well for all regions and all SLCF species. The multi-model mean (mmm) was able to represent the general features of SLCFs in the Arctic and had the best overall performance. For the SLCFs with the greatest radiative impact (CH4, 03, BC, and SO(sup 2-)(sub 4)), the mmm was within ±25 % of the measurements across the Northern Hemisphere. Therefore, we recommend a multi-model ensemble be used for simulating climate and health impacts of SLCFs. Of the SLCFs in our study, model biases were smallest for C"4 and greatest for OA. For most SLCFs, model biases skewed from positive to negative with increasing latitude. Our analysis suggests that vertical mixing, long-range transport, deposition, and wildfires remain highly uncertain processes. These processes need better representation within atmospheric models to improve their simulation of SLCFs in the Arctic environment. As model development proceeds in these areas, we highly recommend that the vertical and 3-D distribution of SLCFs be evaluated, as that information is critical to improving the uncertain processes in models.

Arctic Monitoring and Assessment Programme↗

GEWEX Cloud Systems Study (GCSS)

The Global Energy and Water Cycle Experiment (GEWEX) Cloud Systems Study (GCSS) program seeks to improve the physical understanding of sub-grid scale cloud processes and their representation in parameterization schemes. By improving the description and understanding of key cloud system processes, GCSS aims to develop the necessary parameterizations in climate and numerical weather prediction (NWP) models. GCSS will address these issues mainly through the development and use of cloud-resolving or cumulus ensemble models to generate realizations of a set of archetypal cloud systems. The focus of GCSS is on mesoscale cloud systems, including precipitating convectively-driven cloud systems like MCS's and boundary layer clouds, rather than individual clouds, and on their large-scale effects. Some of the key scientific issues confronting GCSS that particularly relate to research activities in the central U.S. are presented.

Moncrieff, Mitch↗

Cloud model-based simulation of spaceborne radar observations

Simulations of observations from potential spaceborne radars are made based on storm structure generated from the three-dimensional (3D) Goddard cumulus ensemble model simulation of an intense overland convective system. Five frequencies of 3, 10, 14, 35, and 95 GHz are discussed, but the Tropical Rainfall Measuring Mission precipitation radar sensor frequency (14 GHz) is the focus of this study. Radar reflectives and their attenuation in various atmospheric conditions are studied in this simulation. With the attenuation from cloud and precipitation in the estimation of reflectivity factor (dBZ), the reflectivities in the lower atmosphere in the convective cores are significantly reduced. With spatial resolution of 4 km X 4 km, attenuation at 14 GHz may cause as large as a 20-dBZ difference between the simulated measurements of the peak, Z(sub mp) and near-surface reflectivity, Z(sub ms) in the most intense convective region. The Z(sub mp) occurs at various altitudes depending on the hydrometeor concentrations and their vertical distribution. Despite the significant attenuation in the intense cores, the presence of the rain maximum is easily detected by using information of Z(sub mp). In the stratiform region, the attenuation is quite limited (usually less than 5 dBZ), and the reduction of reflectivity is mostly related to the actual vertical structure of cloud distribution. Since Z(sub ms) suffers severe attenuation and tends to underestimate surface rainfall intensity in convective regions. Z(sub mp) can be more representative for rainfall retrieval in the lower atmosphere in these regions. In the stratiform region where attenuation is negligible, however, Z(sub mp) tends to overestimate surface rainfall and Z(sub ms) is more appropriate for rainfall retrieval. A hybrid technique using a weight between the two rain intensities is tested and found potentially usefull for future applications. The estimated surface rain-rate map based on this hybrid approach captures many of the details of the cloud model rain field but still slightly underestimates the rain-rate maximum.

Yeh, H.-Y. M.↗

Multi-Model Assessment of Global Hydropower and Cooling Water Discharge Potential Under Climate Change

Worldwide, 98% of total electricity is currently produced by thermoelectric power and hydropower. Climate change is expected to directly impact electricity supply, in terms of both water availability for hydropower generation and cooling water usage for thermoelectric power. Improved understanding of how climate change may impact the availability and temperature of water resources is therefore of major importance. Here we use a multi-model ensemble to show the potential impacts of climate change on global hydropower and cooling water discharge potential. For the first time, combined projections of streamflow and water temperature were produced with three global hydrological models (GHMs) to account for uncertainties in the structure and parametrization of these GHMs in both water availability and water temperature. The GHMs were forced with bias-corrected output of five general circulation models (GCMs) for both the lowest and highest representative concentration pathways (RCP2.6 and RCP8.5). The ensemble projections of streamflow and water temperature were then used to quantify impacts on gross hydropower potential and cooling water discharge capacity of rivers worldwide. We show that global gross hydropower potential is expected to increase between +2.4% (GCM-GHM ensemble mean for RCP 2.6) and +6.3% (RCP 8.5) for the 2080s compared to 1971-2000. The strongest increases in hydropower potential are expected for Central Africa, India, central Asia and the northern high-latitudes, with 18-33% of the world population living in these areas by the 2080s. Global mean cooling water discharge capacity is projected to decrease by 4.5-15% (2080s). The largest reductions are found for the United States, Europe, eastern Asia, and southern parts of South America, Africa and Australia, where strong water temperature increases are projected combined with reductions in mean annual streamflow. These regions are expected to affect 11-14% (for RCP2.6 and the shared socioeconomic pathway (SSP)1, SSP2, SSP4) and 41-51% (RCP8.5-SSP3, SSP5) of the world population by the 2080s.

global hydrological models↗

SST Variation Due to Interactive Convective-Radiative Processes

The recent linking of Cloud-Resolving Models (CRMs) to Ocean-Mixed Layer (OML) models has provided a powerful new means of quantifying the role of cloud systems in ocean-atmosphere coupling. This is due to the fact that the CRM can better resolve clouds and cloud systems and allow for explicit cloud-radiation interaction. For example, Anderson (1997) applied an atmospheric forcing associated with a CRM simulated squall line to a 3-D OML model (one way or passive interaction). His results suggested that the spatial variability resulting from the squall forcing can last at least 24 hours when forced with otherwise spatially uniform fluxes. In addition, the sea surface salinity (SSS) variability continuously decreased following the forcing, while some of the SST variability remained when a diurnal mixed layer capped off the surface structure. The forcing used in the OML model, however, focused on shorter time (8 h) and smaller spatial scales (100-120 km). In this study, the 3-D Goddard Cumulus Ensemble Model (GCE; 512 x 512 x 23 cu km, 2-km horizontal resolution) is used to simulate convective active episodes occurring in the Western Pacific warm pool and Eastern Atlantic regions. The model is integrated for seven days, and the simulated results are coupled to an OML model to better understand the impact of precipitation and changes in the planetary boundary layer upon SST variation. We will specifically examine and compare the results of linking the OML model with various spatially-averaged outputs from GCE simulations (i.e., 2 km vs. 10-50 km horizontal resolutions), in order to help understand the SST sensitivity to multi-scale influences. This will allow us to assess the importance of explicitly simulated deep and shallow clouds, as well as the subgrid-scale effects (in coarse-model runs) upon SST variation. Results using both 1-D and 2-D OML models will be evaluated to assess the effects of horizontal advection.

Tao, W.-K.↗

Dynamical Sensitivity in Response to a Wide Range of Abrupt CO 2 Forcings

An improved understanding of dynamical variability is important for projecting future changes in extratropical weather and the interaction between the extratropical troposphere and the tropics, stratosphere, cryosphere and ocean. Despite their simplicity, the abrupt 2x- and 4xCO 2 forcing simulations from the Coupled Model Intercomparison Project (CMIP) Phase 6 DECK experiments enable a mechanistic look into the forcing and feedback response characteristics of models that can be unambiguously attributed to an increase in carbon dioxide concentrations. Thus, while typically used to evaluate the climate sensitivity in models, with a primary focus on global surface temperature change, here we focus on several measures of extratropical variability, including projected changes in the storm tracks and in stratospheric polar vortex variability. Results are primarily based on simulations produced using low- and high-top versions of the NASA Goddard Institute for Space Studies Model (ModelE) but results are also presented from the larger CMIP6 multi-model ensemble. In addition to the 2x- and 4xCO 2 simulations, we also explore the linearity of the response of extratropical dynamical variability in ModelE to varying levels of CO 2 spanning the range 1/8-8xCO 2 . In particular, we show that the expansion of the jet streams varies nonlinearly with increasing CO 2 , especially in the Northern Hemisphere, and that this can be interpreted in terms of variations in ocean heat transport. The impact of composition feedbacks on changes in variability is also discussed.

dynamical variability↗

Heat Stress to Jeopardize Crop Production in the US Corn Belt Based on Downscaled CMIP5 Projections

CONTEXT Global food security faces increasing challenges from the changing climate. Changes of agricultural output from some of the most productive regions such as the US Corn Belt can largely affect the world's food market. Developing predictive understanding of the agricultural risk of climate change and potential mitigation strategies is critical for the global food security. OBJECTIVE The objective of this study is to assess the responses of maize and soybean yield to projected climate changes in the Corn Belt, identify the shifting environment stressors on crop yield, and tackle potential climate adaptation strategies. METHODS We drive a process-based model, the Decision Support System for Agrotechnology Transfer, with high-resolution statistically downscaled and bias-corrected historical and future climates from ten CMIP5 models in the MACA-2 database. RESULTS AND CONCLUSIONS The multi-model ensemble mean suggests a 12% decrease of maize yield by mid-century and 40% by late century, with a high degree of model consensus in the direction of changes; for individual models, the projected decrease of maize yield by late century ranges from <5% to over 80%, with the worst crop outcome corresponding to the most sensitive climate models. Soybean yield is projected to increase by midcentury with a high degree of model consensus, but such consensus is lost by late century as some projections shift to significant decreases. Crop yield in the Corn Belt is currently limited by water stress, but is projected to be increasingly limited by heat stress as well after the midcentury. The mounting heat stress will drive the most productive zone for maize to shift from central to northern part of the Corn Belt, but the projected increase in the northern states cannot fully compensate for the decrease in the south, causing the total production to decrease if agricultural practice stays the same. Earlier planting can alleviate only a small fraction of the heat-induced crop loss in a warmer climate. Climate change will (at least partially) offset the yield boost caused by agricultural technology and intensification. SIGNIFICANCE This study advances our predictive understanding of crop yield responses to climate change, and suggests that a multitude of strategies will be needed to address the climate change challenges for the U.S. agriculture.

Crop yield↗

A study of the response of deep tropical clouds to mesoscale processes - Three-dimensional numerical experiments

A three-dimensional numerical cloud model is utilized to study the collective feedback effects of cloud systems on the large-scale environment. The characteristic features of the cloud ensemble model are described. The model is applied to a case of a well-defined ITCZ rainband over the eastern tropical Atlantic ocean. The location, number, and configuration of the clouds that formed in the model during the simulations are examined. The cloud heating and moistening, environmental wind shear, and vertical transports of momentum are analyzed. The collective feedbacks of cloud systems on the large-scale temperature, moisture, and horizontal momentum fields are computed after each simulation. The effect of the pressure gradient force on the v-momentum flux is investigated. It is observed that there is good correlation between the model simulations and the observed data.

Tao, Wei-Kuo↗

Future Sea Level Change Under CMIP5 and CMIP6 Scenarios From the Greenland and Antarctic Ice Sheets

Projections of the sea level contribution from the Greenland and Antarctic ice sheets (GrIS and AIS) rely on atmospheric and oceanic drivers obtained from climate models. The Earth System Models participating in the Coupled Model Intercomparison Project phase 6 (CMIP6) generally project greater future warming compared with the previous Coupled Model Intercomparison Project phase 5 (CMIP5) effort. Here we use four CMIP6 models and a selection of CMIP5 models to force multiple ice sheet models as part of the Ice Sheet Model Intercomparison Project for CMIP6 (ISMIP6). We find that the projected sea level contribution at 2100 from the ice sheet model ensemble under the CMIP6 scenarios falls within the CMIP5 range for the Antarctic ice sheet but is significantly increased for Greenland. Warmer atmosphere in CMIP6 models results in higher Greenland mass loss due to surface melt. For Antarctica, CMIP6 forcing is similar to CMIP5 and mass gain from increased snowfall counteracts increased loss due to ocean warming.

Antarctica↗

Medium-Range River Flood Forecasts Using a Long Short-Term Memory Network

River flooding and the impacts are a concern for decision makers throughout the United States. Accurate medium-range forecasts (~3-7 days) are critical for providing advanced outlooks to emergency management officials. Unfortunately, accurately forecasting rainfall-runoff and the subsequent rise and fall within rivers remain a challenge in hydrological modeling. While complex physical modeling systems are the standard for representing the hydrological processes, they are computationally demanding and can require extensive calibration. Further, uncertainties remain in the model parameters and input data. The use of machine learning can reduce some of the computational demand while maintaining high accuracy. Therefore, this project makes use of a Long Short-Term Memory (LSTM) network which explicitly accounts for the time-dependent nature of rainfall-runoff modeling. The developed LSTM was trained to predict river gauge height, or stage height, based on time-lagged input features which include: gauge height to initialize the model, the NASA Short-term Prediction Research and Transition Center’s instance of the Land Information System (SPoRT-LIS) relative soil moisture to describe the rainfall infiltration rate, and 6-hr Multi-Radar Multi-Sensor quantitative precipitation estimate (MRMS QPE). The developed LSTM based system is then used to produce 7-day forecasts with a 6-hr temporal resolution using three different quantitative precipitation forecasts (QPF) from the NWS’s Weather Prediction Center (WPC), the NCEP Global Forecast System (GFS) model and the National Blend of Models (NBM). This trained modeling system has been implemented as an experimental product at over 100 different rivers in collaboration with at multiple National Weather Service (NWS) Forecast Offices and River Forecast Centers (RFC) across the eastern half of the United States. The developed LSTM model achieved average Nash-Sutcliffe efficiency (NSE) 0.89 higher than the equivalent medium-range National Water Model ensemble member forecast over a 7-day forecast. In addition to the initial development and evaluation, this project has continued to expand. While the initial model was developed for precipitation dominated basins, expansion of the project has taken it to basins effected by snow melt. This presentation will provide an overview of the project with focus on recent developments on incorporating snow melt processes into the model.

Andrew T. White↗

Impacts of Snow Darkening Effects by Light Absorbing Aerosols on Hydroclimate of Eurasia During Boreal Spring and Summer

In this study, we used the NASA GEOS-5 climate model to investigate the impact of snow darkening by light-absorbing aerosols on the hydro-climate if Eurasia during boreal spring and summer. Two sets of 10-member ensemble model integrations with prescribed sea surface temperature were carried out for 10 simulated years (2002-2011); one includes snow-darkening effects (SDE) by light-absorbing aerosols, and one does not (NSDE). Differences between the two experiments in the hydro-climates over Eurasia were evaluated. Results show that SDE warming is most pronounced during the melting season due to strong snow-albedo feedback in the vicinity of the retreating seasonal snowline. SDE spurs a Wet-First-Dry-Later (WFDL) modulation of the surface energy and water balances, characterized by an accelerated (days-to-weeks) snowmelt along with excessive runoff and a warming and wetting of the land during the early part of the melting season. The fast snowmelt is followed by a prolonged (> months) warming and desiccation of the land, stemming from a deficit of late-season snowmelt water and increased surface evaporation. The prolonged warming and drying of the land atmosphere system persist through the summer, sustained by atmospheric conditions favorable for the development of atmospheric blocking, i.e., higher mid-to-upper tropospheric geopotential height, lower relative humidity, reduced cloudiness and enhanced atmospheric subsidence. Overall, SDE by light absorbing aerosols leads to a warmer and drier boreal summer hydro-climate, increasing the frequency of the top 5% and 1% extreme hot days (as defined by NSDE statistics) over western and northern Eurasia by approximately three-fold and tenfold, respectively.

Snow darkening↗

A Goddard Multi-Scale Modeling System with Unified Physics

A multi-scale modeling system with unified physics has been developed at NASA Goddard Space Flight Center (GSFC). The system consists of an MMF, the coupled NASA Goddard finite-volume GCM (fvGCM) and Goddard Cumulus Ensemble model (GCE, a CRM); the state-of-the-art Weather Research and Forecasting model (WRF) and the stand alone GCE. These models can share the same microphysical schemes, radiation (including explicitly calculated cloud optical properties), and surface models that have been developed, improved and tested for different environments. The following is presented in this report: (1) a brief review of the GCE model and its applications on the impact of aerosols on deep precipitation processes, (2) the Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), and (3) a discussion on the Goddard WRF version (its developments and applications).

Tao, Wei-Kuo↗

A Goddard Multi-Scale Modeling System with Unified Physics

A multi-scale modeling system with unified physics has been developed at NASA Goddard Space Flight Center (GSFC). The system consists of an MMF, the coupled NASA Goddard finite-volume GCM (fvGCM) and Goddard Cumulus Ensemble model (GCE, a CRM); the state-of-the-art Weather Research and Forecasting model (WRF) and the stand alone GCE. These models can share the same microphysical schemes, radiation (including explicitly calculated cloud optical properties), and surface models that have been developed, improved and tested for different environments. In this talk, I will present: (1) A brief review on GCE model and its applications on the impact of the aerosol on deep precipitation processes, (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), and (3) A discussion on the Goddard WRF version (its developments and applications). We are also performing the inline tracer calculation to comprehend the physical processes (i.e., boundary layer and each quadrant in the boundary layer) related to the development and structure of hurricanes and mesoscale convective systems. In addition, high - resolution (spatial. 2km, and temporal, I minute) visualization showing the model results will be presented.

Tao, Wei-Kuo↗

A Goddard Multi-Scale Modeling System with Unified Physics

A multi-scale modeling system with unified physics has been developed at NASA Goddard Space Flight Center (GSFC). The system consists of an MMF, the coupled NASA Goddard finite-volume GCM (fvGCM) and Goddard Cumulus Ensemble model (GCE, a CRM); the state-of-the-art Weather Research and Forecasting model (WRF) and the stand alone GCE. These models can share the same microphysical schemes, radiation (including explicitly calculated cloud optical properties), and surface models that have been developed, improved and tested for different environments. In this talk, I will present: (1) A brief review on GCE model and its applications on the impact of the aerosol on deep precipitation processes, (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), and (3) A discussion on the Goddard WRF version (its developments and applications). We are also performing the inline tracer calculation to comprehend the ph ysical processes (i.e., boundary layer and each quadrant in the boundary layer) related to the development and structure of hurricanes and mesoscale convective systems.

Tao, Wei-Kuo↗

Evaluating Downscaling Methods for Seasonal Climate Forecasts over East Africa

The U.S. National Multi-Model Ensemble seasonal forecasting system is providing hindcast and real-time data streams to be used in assessing and improving seasonal predictive capacity. The NASA / USAID SERVIR project, which leverages satellite and modeling-based resources for environmental decision making in developing nations, is focusing on the evaluation of NMME forecasts specifically for use in impact modeling within hub regions including East Africa, the Hindu Kush-Himalayan (HKH) region and Mesoamerica. One of the participating models in NMME is the NASA Goddard Earth Observing System (GEOS5). This work will present an intercomparison of downscaling methods using the GEOS5 seasonal forecasts of temperature and precipitation over East Africa. The current seasonal forecasting system provides monthly averaged forecast anomalies. These anomalies must be spatially downscaled and temporally disaggregated for use in application modeling (e.g. hydrology, agriculture). There are several available downscaling methodologies that can be implemented to accomplish this goal. Selected methods include both a non-homogenous hidden Markov model and an analogue based approach. A particular emphasis will be placed on quantifying the ability of different methods to capture the intermittency of precipitation within both the short and long rain seasons. Further, the ability to capture spatial covariances will be assessed. Both probabilistic and deterministic skill measures will be evaluated over the hindcast period.

Robertson, Franklin R.↗

Evaluating Downscaling Methods for Seasonal Climate Forecasts over East Africa

The U.S. National Multi-Model Ensemble seasonal forecasting system is providing hindcast and real-time data streams to be used in assessing and improving seasonal predictive capacity. The NASA / USAID SERVIR project, which leverages satellite and modeling-based resources for environmental decision making in developing nations, is focusing on the evaluation of NMME forecasts specifically for use in impact modeling within hub regions including East Africa, the Hindu Kush-Himalayan (HKH) region and Mesoamerica. One of the participating models in NMME is the NASA Goddard Earth Observing System (GEOS5). This work will present an intercomparison of downscaling methods using the GEOS5 seasonal forecasts of temperature and precipitation over East Africa. The current seasonal forecasting system provides monthly averaged forecast anomalies. These anomalies must be spatially downscaled and temporally disaggregated for use in application modeling (e.g. hydrology, agriculture). There are several available downscaling methodologies that can be implemented to accomplish this goal. Selected methods include both a non-homogenous hidden Markov model and an analogue based approach. A particular emphasis will be placed on quantifying the ability of different methods to capture the intermittency of precipitation within both the short and long rain seasons. Further, the ability to capture spatial covariances will be assessed. Both probabilistic and deterministic skill measures will be evaluated over the hindcast period

Roberts, J. Brent↗

Towards a New Food System Assessment: AgMIP Coordinated Global and Regional Assessments of Climate Change

Agricultural stakeholders need more credible information on which to base adaptation and mitigation policy decisions. In order to provide this, we must improve the rigor of agricultural modelling. Ensemble approaches can be used to address scale issues and integrated teams can overcome disciplinary silos. The AgMIP Coordinated Global and Regional Assessments of Climate Change and Food Security (CGRA) has the goal to link agricultural systems models using common protocols and scenarios to significantly improve understanding of climate effects on crops, livestock and livelihoods across multiple scales. The AgMIP CGRA assessment brings together experts in climate, crop, livestock, economics, and food security to develop Protocols to guide the process throughout the assessment. Scenarios are designed to consistently combine elements of intertwined storylines of future society including, socioeconomic development, greenhouse gas concentrations, and specific pathways of agricultural sector development. Through these approaches, AgMIP partners around the world are providing an evidence base for their stakeholders as they make decisions and investments.

Ensembles↗

Models, In situ, and Remote sensing of Aerosols (MIRA): Formation of an International Working Group

There is a natural partitioning of scientific interest amongst three specialties of aerosol research: modeling, in situ measurements, and remote sensing. The community sees enhanced measurement capabilities when these groups interact, and this strengthens the overall scientific impact on climate and air quality. The Models, In situ, and Remote sensing of Aerosols (MIRA) working group connects members of the different aerosol communities through collaborative projects. What is MIRA? MIRA is forum that fosters international collaborations amongst the aerosol specialties. MIRA is also a collection of interdisciplinary projects with clear goals that are pursued by small working groups. Finally, MIRA projects are generally characterized by requests for additional scientific data (both observational and modeled). Why? The purpose of MIRA is to contextualize both observations and model results through the encouragement of holistic projects and collaborations. How does MIRA differ from other projects? MIRA focuses on interdisciplinarity to improve measurements and their utility, so MIRA complements the activities of other groups. For example, ensemble model runs of AeroCom could be used in a MIRA project with greater robustness than a similar effort that uses single-model analyses. We first present a description of MIRA and how your project can become a part of the MIRA community. This is followed by brief descriptions of some of the current MIRA projects, which include the Mapping of Aerosol lidar ratios for CALIPSO (MAC), the Tables of Aerosol Optics (TAO), and the Harmonization of aerosol Assimilation Models and Retrievals (HAMR). Finally, we discuss the immediate science goals and organization of MIRA.

Gregory Schuster↗