Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Diagnosing collisions of magnetized, high energy density plasma flows using a combination of collective Thomson scattering, Faraday rotation, and interferometry (invited)

A suite of laser based diagnostics is used to study interactions of magnetised, supersonic, radiatively cooled plasma flows produced using the Magpie pulse power generator (1.4 MA, 240 ns rise time). Collective optical Thomson scattering measures the time-resolved local flow velocity and temperature across 7–14 spatial positions. The scattering spectrum is recorded from multiple directions, allowing more accurate reconstruction of the flow velocity vectors. The areal electron density is measured using 2D interferometry; optimisation and analysis are discussed. The Faraday rotation diagnostic, operating at 1053 nm, measures the magnetic field distribution in the plasma. Measurements obtained simultaneously by these diagnostics are used to constrain analysis, increasing the accuracy of interpretation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High Energy-Density Materials with Fast Energy Release: Molecular scale shock response of explosives (DTRA Basic Research Final Report 2012)

The principle goal of this $\$$150K/yr, 3-yr. project was to experimentally measure the time evolution of shock induced chemistry in the explosive RDX. Since direct measurements of shock induced chemistry in RDX, or any other explosive, have eluded researchers for several decades, new techniques had to be developed. Transient absorption was coupled to laser shock loading to probe the possible role of electronic excitations in the chemistry of RDX. Transient absorption signatures turned out to be a good indication of the relative degree of chemical reaction versus time, but were not conclusive regarding whether electronic excitation was an important factor in shock initiation. Preliminary efforts to sensitize shock induced chemistry with ultraviolet pulsed excitation were performed, but are not yet conclusive. The bulk of the effort of the project was directed at development of femtosecond stimulated Raman spectroscopy (FSRS) as a diagnostic of temperature in the presence of chemistry. This effort was significantly more difficult than initially anticipated. While we had planned to apply the method to single shot laser experiments, the sensitivity achieved during the project duration was insufficient to measure the sub-nanogram amounts of material shocked. Despite the difficulties applying this measurement to our current small scale laser shock experiments, it shows significant promise for measurements where there is more volume of material shocked. We have established the theoretical framework and experimentally validated FSRS as a sub-picosecond molecular vibrational temperature measurement diagnostic. We have also followed the shock induced chemistry of RDX through transient absorption spectroscopy and established the shock stresses required to achieve sub-nanosecond reaction rates. The project led to 3 peer reviewed journal articles, 4 conference proceedings, 3 invited talks at conferences, 2 contributed talks at conferences, and a number of other presentations.

36 MATERIALS SCIENCE↗

A step in the direction of resolving the paradox of Perdew–Zunger self-interaction correction. II. Gauge consistency of the energy density at three levels of approximation

The Perdew-Zunger(PZ) self-interaction correction (SIC) was designed to correct the one-electron limit of any approximate density functional for the exchange-correlation (xc) energy, while yielding no correction to the exact functional. Unfortunately, it spoils the slowly-varying-in-space limits of the uncorrected approximate functionals, where those functionals are right by construction. The right limits can be restored by locally scaling down the energy density of the PZ SIC in many-electron regions, but then a spurious correction to the exact functional would be found unless the self-Hartree and exact self-xc terms of the PZ SIC energy density were expressed in the same gauge. Only the local density approximation satisfies the same-gauge condition for the energy density, which explains why the recent local-scaling SIC (LSIC) is found here to work excellently for atoms and molecules only with this basic approximation, and not with the more advanced generalized gradient approximations (GGAs) and meta-GGAs, which lose the Hartree gauge via simplifying integrations by parts. The transformation of energy density that achieves the Hartree gauge for the exact xc functional can also be applied to approximate functionals. Doing so leads to a simple scaled-down self-interaction (sdSIC) correction that is typically much more accurate than PZ SIC in tests for many molecular properties (including equilibrium bond lengths). The present work shows unambiguously that the largest errors of PZ SIC applied to standard functionals at three levels of approximation can be removed by restoring their correct slowlyvarying- density limits. Here, it also confirms the relevance of these limits to atoms and molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Energy Density Regenerative Fuel Cell Systems for Terrestrial Applications

Regenerative Fuel Cell System (RFCS) technology for energy storage has been a NASA power system concept for many years. Compared to battery-based energy storage systems, RFCS has received relatively little attention or resources for development because the energy density and electrical efficiency were not sufficiently attractive relative to advanced battery systems. Even today, RFCS remains at a very low technology readiness level (TRL of about 2 indicating feasibility has been demonstrated). Commercial development of the Proton Exchange Membrane (PEM) fuel cells for automobiles and other terrestrial applications and improvements in lightweight pressure vessel design to reduce weight and improve performance make possible a high energy density RFCS energy storage system. The results from this study of a lightweight RFCS energy storage system for a remotely piloted, solar-powered, high altitude aircraft indicate an energy density up to 790 w-h/kg with electrical efficiency of 53.4% is attainable. Such an energy storage system would allow a solar-powered aircraft to carry hundreds of kilograms of payload and remain in flight indefinitely for use in atmospheric research, earth observation, resource mapping. and telecommunications. Future developments in the areas of hydrogen and oxygen storage, pressure vessel design, higher temperature and higher- pressure fuel cell operation, unitized regenerative fuel cells, and commercial development of fuel cell technology will improve both the energy density and electrical efficiency of the RFCS.

Burke, Kenneth A.↗

Configuration mixing within the energy density functional formalism: Removing spurious contributions from nondiagonal energy kernels

Multi reference calculations along the lines of the generator coordinate method or the restoration of broken symmetries within the nuclear energy density functional (EDF) framework are becoming a standard tool in nuclear structure physics. These calculations rely on the extension of a single-reference energy functional, of the Gogny or the Skyrme types, to nondiagonal energy kernels. There is no rigorous constructive framework for this extension so far. The commonly accepted way proceeds by formal analogy with the expressions obtained when applying the generalized Wick theorem to the nondiagonal matrix element of a Hamilton operator between two product states. It is pointed out that this procedure is ill defined when extended to EDF calculations as the generalized Wick theorem is taken outside of its range of applicability. In particular, such a procedure is responsible for the appearance of spurious divergences and steps in multi reference EDF energies, as was recently observed in calculations restoring particle number or angular momentum. In the present work, we give a formal analysis of the origin of this problem for calculations with and without pairing, i.e., constructing the density matrices from either Slater determinants or quasiparticle vacua. We propose a method to regularize nondiagonal energy kernels such that divergences and steps are removed from multi reference EDF energies. Such a removal is a priori quasiparticle-basis dependent. A special feature of the method we use to proceed to the actual regularization is that it singles out one basis among all possible ones. The regularization method is applicable to calculations based on any symmetry restoration or generator coordinate but is limited to EDFs depending only on integer powers of the normal and anomalous density matrices. Eventually, the method is formally illustrated for particle-number restoration and is specified to configuration mixing calculations based on Slater determinants.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by ~70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. Here, this article discusses three major aspects for cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.

25 ENERGY STORAGE↗

Experimental Investigation of a Novel High Energy Density Mobile Sorption–based Thermal Battery

Around 20% of the total primary energy use in the United States is for thermal demands of buildings, such as space cooling, dehumidification, and space heating. Low-grade geothermal energy is abundant and could effectively satisfy these thermal demands. However, low-grade geothermal energy is underused because geothermal fluids have an energy density too low to justify transportation between the existing resources and buildings. The mobile sorption-based thermal battery (MSTB) system was thus developed to store the low-temperature heat using three-phase (vapor-liquid solution-solid crystal) sorption technology with a much higher energy density than a geothermal fluid provides. The energy density of an MSTB is over 6 times that of conventional hot water, enabling economical long-distance transport of low-temperature heat for thermal end uses. This can alleviate peak demand on the electricity grid by offsetting space-conditioning loads, improving the reliability and resilience of US energy systems. High energy density, fast crystallization, and crystal dissolution of the sorption material are critical to the viability and performance of the MSTB system. Therefore, the design and operation of MSTB systems must ensure effective generation and dissolution of the salt crystals inside the MSTB. To achieve this target, this study developed a prototype MSTB and its testing apparatus, and experimentally investigated the prototype MSTB. The crystallization and dissolution performance were also theoretically defined and quantified. The experimental results showed that the prototype MSTB was able to achieve an energy storage density of 903.0 kJ/kg and a maximum discharge rate of 1.3 kW. This study proves the feasibility and high performance of the MSTB concept, which is helpful to further study and development of the MSTB system.

Wang, Lingshi↗

Time-frequency energy density precipitation method for time-of-flight extraction of narrowband Lamb wave detection signals

The time-of-flight of the Lamb wave provides an important basis for defect evaluation in metal plates and is the input signal for Lamb wave tomographic imaging. However, the time-of-flight can be difficult to acquire because of the Lamb wave dispersion characteristics. This work proposes a time-frequency energy density precipitation method to accurately extract the time-of-flight of narrowband Lamb wave detection signals in metal plates. In the proposed method, a discrete short-time Fourier transform is performed on the narrowband Lamb wave detection signals to obtain the corresponding discrete time-frequency energy density distribution. The energy density values at the center frequency for all discrete time points are then calculated by linear interpolation. Next, the time-domain energy density curve focused on that center frequency is precipitated by least squares fitting of the calculated energy density values. Finally, the peak times of the energy density curve obtained relative to the initial pulse signal are extracted as the time-of-flight for the narrowband Lamb wave detection signals. An experimental platform is established for time-of-flight extraction of narrowband Lamb wave detection signals, and sensitivity analysis of the proposed time-frequency energy density precipitation method is performed in terms of propagation distance, dispersion characteristics, center frequency, and plate thickness. For comparison, the widely used Hilbert–Huang transform method is also implemented for time-of-flight extraction. The results show that the time-frequency energy density precipitation method can accurately extract the time-of-flight with relative error of <1% and thus can act as a universal time-of-flight extraction method for narrowband Lamb wave detection signals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Oxygen-Vacancy Abundant Nanoporous Ni/NiMnO 3 /MnO 2 @NiMn Electrodes with Ultrahigh Capacitance and Energy Density for Supercapacitors

High-performance energy storage devices (HPEDs) play a critical role in the realization of clean energy and thus enable the overarching pursuit of nonpolluting, green technologies. Supercapacitors are one class of such lucrative HPEDs; however, a serious limiting factor of supercapacitor technology is its sub-par energy density. Here, this report presents hitherto unchartered pathway of physical deformation, chemical dealloying, and microstructure engineering to produce ultrahigh-capacitance, energy-dense NiMn alloy electrodes. The activated electrode delivered an ultrahigh specific-capacitance of 2700 F/cm 3 at 0.5 A/cm 3 . The symmetric device showcased an excellent energy density of 96.94 Wh/L and a remarkable cycle life of 95% retention after 10,000 cycles. Transmission electron microscopy and atom probe tomography studies revealed the evolution of a unique hierarchical microstructure comprising fine Ni/NiMnO 3 nanoligaments within MnO 2 -rich nanoflakes. Theoretical analysis using density functional theory showed semimetallic nature of the nanoscaled oxygen-vacancy-rich NiMnO 3 structure, highlighting enhanced carrier concentration and electronic conductivity of the active region. Furthermore, the geometrical model of NiMnO 3 crystals revealed relatively large voids, likely providing channels for the ion intercalation/de-intercalation. The current processing approach is highly adaptable and can be applied to a wide range of material systems for designing highly efficient electrodes for energy-storage devices.

25 ENERGY STORAGE↗

Bromine Assisted MnO 2 Dissolution Chemistry: Toward a Hybrid Flow Battery with Energy Density of over 300 Wh L −1

Abstract Mn 2+ /Mn 3+ redox pair has been considered as a promising cathode for high energy density batteries, due to its attractive features of high redox potential, solubility and outstanding kinetics. However, the disproportionation side reaction of Mn 3+ , which results in accumulation of “dead” MnO 2 limits its reversibility and further energy density. Herein, a novel catholyte based on mixture of Mn 2+ and Br − was proposed for flow batteries with high energy density and long cycle life. In the design, the “dead” MnO 2 can be fully discharged via Br − by a chemical‐electrochemical reaction. Coupled with Cd/Cd 2+ as anode, the assembled Bromine‐Manganese flow battery (BMFB) demonstrates a high energy efficiency of 76 % at 80 mA cm −2 with energy density of 360 Wh L −1 . The battery assembled with silicotungstic acid as anode could continuously run for over 2000 cycles at 80 mA cm −2 . With high power density, energy density and durability, the BMFB shows great potential for large‐scale energy storage.

Chemistry↗

Validating density-functional theory simulations at high energy-density conditions with liquid krypton shock experiments to 850 GPa on Sandia's Z machine

We use Sandia's Z machine and magnetically accelerated flyer plates to shock compress liquid krypton to 850 GPa and compare with results from density-functional theory (DFT) based simulations using the AM05 functional. We also employ quantum Monte Carlo calculations to motivate the choice of AM05. We conclude that the DFT results are sensitive to the quality of the pseudopotential in terms of scattering properties at high energy/temperature. A new Kr projector augmented wave potential was constructed with improved scattering properties which resulted in excellent agreement with the experimental results to 850 GPa and temperatures above 10 eV (110 kK). In conclusion, we present comparisons of our data from the Z experiments and DFT calculations to current equation of state models of krypton to determine the best model for high energy-density applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The data-driven future of high-energy-density physics

High-energy-density physics is the field of physics concerned with studying matter at extremely high temperatures and densities. Such conditions produce highly nonlinear plasmas, in which several phenomena that can normally be treated independently of one another become strongly coupled. The study of these plasmas is important for our understanding of astrophysics, nuclear fusion and fundamental physics—however, the nonlinearities and strong couplings present in these extreme physical systems makes them very difficult to understand theoretically or to optimize experimentally. Here we argue that machine learning models and data-driven methods are in the process of reshaping our exploration of these extreme systems that have hitherto proved far too nonlinear for human researchers. Furthermore, from a fundamental perspective, our understanding can be improved by the way in which machine learning models can rapidly discover complex interactions in large datasets. From a practical point of view, the newest generation of extreme physics facilities can perform experiments multiple times a second (as opposed to approximately daily), thus moving away from human-based control towards automatic control based on real-time interpretation of diagnostic data and updates of the physics model. To make the most of these emerging opportunities, we suggest proposals for the community in terms of research design, training, best practice and support for synthetic diagnostics and data analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring opacities for high energy density matter

How does energy propagate from the solar core to the surface of the sun, where it emerges to warm the Earth? How old are the stellar systems that host the numerous exoplanets that have now been discovered outside our solar system? How does radiation penetrate and heat an inertial fusion capsule? The answers to these seemingly disparate questions hinge on knowledge of the fundamental material property that controls the absorption of radiation: opacity. Opacity plays a critical role for many high energy density (HED) systems and is highly important for the NNSA stewardship mission. In addition, laboratory astrophysics research serves as a conduit for establishing collaborations between the NNSA laboratories, between the NNSA laboratories and universities, and between the NNSA laboratories and our international partners. Exposure to open peer review sharpens the research capabilities and interactions of NNSA scientists with students and professors as a natural path for recruiting the next generation of stockpile stewards.

36 MATERIALS SCIENCE↗

Particle-number restoration within the energy density functional formalism: Nonviability of terms depending on noninteger powers of the density matrices

We discuss the origin of pathological behaviors that have been recently identified in particle-number-restoration calculations performed within the nuclear energy density functional framework. A regularization method that removes the problematic terms from the multi reference energy density functional and that applies (i) to any symmetry-restoration- and/or generator-coordinate-method-based configuration mixing calculation and (ii) to energy density functionals depending only on integer powers of the density matrices was proposed in [D. Lacroix, T. Duguet, and M. Bender, Phys. Rev. C 79, 044318 (2009)] and implemented for particle-number-restoration calculations in [M. Bender, T. Duguet, and D. Lacroix, Phys. Rev. C 79, 044319 (2009)]. In the present article, we address the viability of noninteger powers of the density matrices in the nuclear energy density functional. Our discussion builds on the analysis already carried out in [J. Dobaczewski et al., Phys. Rev. C 76, 054315 (2007)]. First, we propose to reduce the pathological nature of terms depending on a noninteger power of the density matrices by regularizing the fraction that relates to the integer part of the exponent using the method proposed in [D. Lacroix, T. Duguet, and M. Bender, Phys. Rev. C 79, 044318 (2009)]. Then, we discuss the spurious features brought about by the remaining fractional power. Finally, we conclude that noninteger powers of the density matrices are not viable and should be avoided in the first place when constructing nuclear energy density functionals that are eventually meant to be used in multi reference calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Advanced intermediate temperature sodium-nickel chloride batteries with ultra-high energy density

Here we demonstrate for the first time that planar Na-NiCl 2 batteries can be operated at an intermediate temperature of 190°C with ultra-high energy density. A specific energy density of 350 Wh/kg, which is 3 times higher than that of conventional tubular Na-NiCl 2 batteries operated at 280°C, was obtained for planar Na-NiCl 2 batteries operated at 190°C over a long-term cell test (1000 cycles). The high energy density and superior cycle stability are attributed to the slower particle growth of the cathode materials (NaCl and Ni) at 190°C. The results reported in this work demonstrate that planar Na-NiCl 2 batteries operated at an intermediate temperature could greatly benefit this traditional energy storage technology by improving battery energy density, cycle life and reducing material costs.

25 ENERGY STORAGE↗

Cosmological implications of a dark matter self-interaction energy density

We investigate cosmological constraints on an energy density contribution of elastic dark matter self-interactions characterized by the mass of the exchange particle m{sub SI} and coupling constant {alpha}{sub SI}. Because of the expansion behavior in a Robertson-Walker metric we investigate self-interacting dark matter that is warm in the case of thermal relics. The scaling behavior of dark matter self-interaction energy density ({rho}{sub SI{proportional_to}}a{sup -6}) shows that it can be the dominant contribution (only) in the very early universe. Thus its impact on primordial nucleosynthesis is used to restrict the interaction strength m{sub SI}/{radical}({alpha}{sub SI}), which we find to be at least as strong as the strong interaction. Furthermore we explore dark matter decoupling in a self-interaction dominated universe, which is done for the self-interacting warm dark matter as well as for collisionless cold dark matter in a two component scenario. We find that strong dark matter self-interactions do not contradict superweak inelastic interactions between self-interacting dark matter and baryonic matter ({sigma}{sub A}{sup SIDM}<<{sigma}{sub weak}) and that the natural scale of collisionless cold dark matter decoupling exceeds the weak scale ({sigma}{sub A}{sup CDM}>{sigma}{sub weak}) and depends linearly on the particle mass. Finally structure formation analysis reveals a linear growing solution during self-interaction domination ({delta}{proportional_to}a); however, only noncosmological scales are enhanced.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗