Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron bifurcation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

122 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Controls on Iron Reduction and Biomineralization over Broad Environmental Conditions as Suggested by the Firmicutes Orenia metallireducens Strain Z6

Microbial iron reduction is a ubiquitous biogeochemical process driven by diverse microorganisms in a variety of environments. However, it is often difficult to separate the biological from the geochemical controls on bioreduction of Fe(III) oxides. In this study, we investigated the primary driving factor(s) that mediate secondary iron mineral formation over a broad range of environmental conditions using a single dissimilatory iron reducer, Orenia metallireducens strain Z6. A total of 17 distinct geochemical conditions were tested with differing pH (6.5–8.5), temperature (22–50 °C), salinity (2–20% NaCl), anions (phosphate and sulfate), electron shuttle (anthraquinone-2,6-disulfonate), and Fe(III) oxide mineralogy (ferrihydrite, lepidocrocite, goethite, hematite, and magnetite). The observed rates and extent of iron reduction differed significantly with k int between 0.186 and 1.702 mmol L –1 day –1 and Fe(II) production ranging from 6.3% to 83.7% of the initial Fe(III). Using X-ray absorption and scattering techniques (EXAFS and XRD), we identified and assessed the relationship between secondary minerals and the specific environmental conditions. It was inferred that the observed bifurcation of the mineralization pathways may be mediated by differing extents of Fe(II) sorption on the remaining Fe(III) minerals. These results expand our understanding of the controls on biomineralization during microbial iron reduction and aid the development of practical applications.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

Interconversion of diborane(4) isomers

Highly correlated electronic structure computations using many-body perturbation theory and coupled-cluster gradient techniques are used to study the reaction pathway that links the two forms (C2u and D2d) of diborane(4). The results obtained indicate that a low-energy pathway exists for interconversion of the two low-lying isomers of diborane(4). The proposed mechanism consists of a single concerted but nonsynchronous rotation of the BH2 groups. The pathway first follows an idealized reaction coordinate which preserves C2 symmetry, but then bifurcates at a branch point, leading to two equivalent transition states which lack nontrivial elements of symmetry.

Stanton, John F.↗
DOE OSTI2022

Contributions to Loss Across the Magnetopause During an Electron Dropout Event

Abstract Dropout events are dramatic decreases in radiation belt electron populations that can occur in as little as 30 minutes. Loss to magnetopause due to a combination of magnetopause shadowing and outward radial transport plays a significant role in these events. We examine the dropout of relativistic electron populations during the October 2012 geomagnetic storm using simulated electron phase space density, evaluating the contribution of different processes to losses across the magnetopause. We compare loss contribution from outward transport calculated using a standard empirical radial diffusion model that assumes a dipolar geomagnetic field to an event‐specific radial diffusion model evaluated with a non‐dipolar geomagnetic field. We additionally evaluate the contribution of Shabansky type 1 particles, which bounce along magnetic field lines with local equatorial maxima, to the loss calculated during this event. We find that the empirical radial diffusion model with a dipolar background field underestimates the contribution of radial diffusion to this dropout event by up to 10% when compared to the event‐specific, non‐dipolar radial diffusion model. We additionally find that including Shabansky type 1 particles in the initial electron phase space density, that is, allowing some magnetic field lines distorted from the typical single‐minima configuration in drift shell construction, increases the calculated loss by an average of 0.75%. This shows that the treatment of the geomagnetic field significantly impacts the calculation of electron losses to the magnetopause during dropout events, with the non‐dipolar treatment of radial diffusion being essential to accurately quantify the loss of outer radiation belt populations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2023

Reconnection in a Pinch

A recently published analysis of current sheets has updated the classic Harris 1D static solution by considering multiple classes of charged particle trajectories in a generalized and dynamic current sheet. It uses a 1D PIC simulation to describe dynamic pinching and bifurcation of the current sheet. These 1D results strongly suggest that properties of the inflowing plasma, including the plasma beta, have an important effect on the equilibrium thickness of the pinched current sheet. Since 1D studies cannot describe magnetic reconnection, the time appears right to carry such 1D studies over to 2D or 3D simulations to explore current sheet thickness effects on reconnection. The Magnetospheric Multiscale Mission (MMS), with its well-resolved multipoint measurements of collisionless plasma and fields, has found that collisionless reconnection is accompanied by non-adiabatic motions of electrons that only occur in magnetic structures with a narrow scale comparable to electron inertial lengths (d e ). The recent 1D studies suggest that a plasma pinch to such scales may only occur for inflowing magnetized plasmas with relatively low plasma beta. We conclude that a parametric exploration of simulated and observed reconnection inflow conditions, particularly plasma beta, should shed light on the enablement of reconnection in collisionless plasmas.

reconnection↗
DOE OSTI2023

Tetrafluorenofulvalene as a sterically frustrated open-shell alkene

Electronic and steric effects are known to greatly influence the structure, characteristics and reactivity of organic compounds. A typical π bond is weakened by oxidation (corresponding to the removal of electrons from bonding orbitals), by reduction (through addition of electrons to antibonding orbitals) and by unpairing of the bonding electrons, such as in the triplet state. Here we describe tetrafluorenofulvalene (TFF), a twisted, open-shell alkene for which these general rules do not hold. Through the synthesis, experimental characterization and computational analysis of its charged species spanning seven redox states, the central alkene bond in TFF is shown to become substantially stronger in the tri- and tetraanion, generated by chemical reduction. Furthermore, although its triplet state contains a weaker alkene bond than the singlet, in the quintet state its bond order increases substantially, yielding a flatter structure. This behaviour originates from the doubly bifurcated topology of the underlying spin system and can be rationalized by the balancing effects of benzenoid aromaticity and spin pairing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photoelectron Spectroscopy and Theoretical Study on Monosolvated Cyanate Analogue Clusters ECX-· Sol (ECX- = NCSe-, AsCSe- and AsCS-; Sol = H2O, CH3CN)

Six monosolvated cyanate analogue clusters ECX-?Sol (ECX– = NCSe-, AsCSe-, and AsCS-; Sol = H2O and CH3CN) were investigated using negative ion photoelectron spectroscopy (NIPES). NIPES experiments show that these clusters possess overall similar spectra compared to their respective isolated ECX- anions but shift to higher electron binding energy with solvent CH3CN stabilizing the excess electrons slightly more than H2O. For the ECX-·H2O series, vertical detachment energies and their increments relative to the bare species are measured to be 3.700 / 0.370, 3.085 / 0.425, 3.085 / 0.430 eV for NCSe-, AsCSe- and AsCS-, respectively, while the corresponding values in ECX-·CH3CN series are 3.835 / 0.505, 3.145 / 0.475, and 3.135 / 0.480 eV. Ab initio electronic structure calculations indicate the excess charges located at the terminal N and Se atoms in NCSe- and migrated to the central C atom in AsCSe- and AsCS-. For NCSe-, the solvation is driven by the interactions with the two negatively charged terminal ends, while for AsCSe- and AsCS-, the solvation revolves around the interactions with the central C atom, where all the excess negative charge is concentrated. Two nearly degenerate isomers for NCSe-·H2O are identified, one forming a single strong N…H-O hydrogen bond (HB) and the other featuring a bidentate HB with two hydroxyl H atoms pointing to N and Se ends. In contrast, the negative central C atom in AsCSe-/AsCS- allows the formation of a bifurcated HB with H2O. Similar effects are observed for the acetonitrile case, in which the three H atoms of methyl group interact with the two negatively charged terminal ends in NCSe-, while prefer binding to the central negative carbon atom in AsCSe-/AsCS-. The different binding motifs derived in this work may suggest distinctly different solvation properties in NCSe- versus AsCSe-/AsCS-, with the former anion leading to asymmetric solvation at the N end of the solute, while the latter species creating more ‘isotropic’ solvation around the central C equatorial plane. This work was supported by U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences, and performed using EMSL, a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory, which is operated by Battelle Memorial Institute for the DOE. The theoretical calculations were conducted on EMSL’s “Cascade” Supercomputer.

Yuan, Qinqin↗
DOE OSTI2023

The multichannel i -propyl + O2 reaction system: A model of secondary alkyl radical oxidation

The i-propyl + O2 reaction mechanism has been investigated by definitive quantum chemical methods to establish this system as a benchmark for the combustion of secondary alkyl radicals. Focal point analyses extrapolating to the ab initio limit were performed based on explicit computations with electron correlation treatments through coupled cluster single, double, triple, and quadruple excitations and basis sets up to cc-pV5Z. The rigorous coupled cluster single, double, and triple excitations/cc-pVTZ level of theory was used to fully optimize all reaction species and transition states, thus, removing some substantial flaws in reference geometries existing in the literature. The vital i-propylperoxy radical (MIN1) and its concerted elimination transition state (TS1) were found 34.8 and 4.4 kcal mol−1 below the reactants, respectively. Two β-hydrogen transfer transition states (TS2, TS2′) lie above the reactants by (1.4, 2.5) kcal mol−1 and display large Born–Oppenheimer diagonal corrections indicative of nearby surface crossings. An α-hydrogen transfer transition state (TS5) is discovered 5.7 kcal mol−1 above the reactants that bifurcates into equivalent α-peroxy radical hanging wells (MIN3) prior to a highly exothermic dissociation into acetone + OH. The reverse TS5 → MIN1 intrinsic reaction path also displays fascinating features, including another bifurcation and a conical intersection of potential energy surfaces. An exhaustive conformational search of two hydroperoxypropyl (QOOH) intermediates (MIN2 and MIN3) of the i-propyl + O2 system located nine rotamers within 0.9 kcal mol−1 of the corresponding lowest-energy minima.

Chemistry↗
NASA NTRS2003

Coupling the Solar-Wind/IMF to the Ionosphere through the High Latitude Cusps

Magnetic merging is a primary means for coupling energy from the solar wind into the magnetosphere-ionosphere system. The location and nature of the process remain as open questions. By correlating measurements form diverse locations and using large-scale MHD models to put the measurements in context, it is possible to constrain out interpretations of the global and meso-scale dynamics of magnetic merging. Recent evidence demonstrates that merging often occurs at high latitudes in the vicinity of the cusps. The location is in part controlled by the clock angle in the interplanetary magnetic field (IMF) Y-Z plane. In fact, B(sub Y) bifurcated the cusp relative to source regions. The newly opened field lines may couple to the ionosphere at MLT locations of as much as 3 hr away from local noon. On the other side of noon the cusp may be connected to merging sites in the opposite hemisphere. In face, the small convection cell is generally driven by opposite hemisphere merging. B(sub X) controls the timing of the interaction and merging sites in each hemisphere, which may respond to planar features in the IMF at different times. Correlation times are variable and are controlled by the dynamics of the tilt of the interplanetary electric field phase plane. The orientation of the phase plane may change significantly on time scales of tens of minutes. Merging is temporally variable and may be occurring at multiple sites simultaneously. Accelerated electrons from the merging process excite optical signatures at the foot of the newly opened field lines. All-sky photometer observations of 557.7 nm emissions in the cusp region provide a "television picture" of the merging process and may be used to infer the temporal and spatial variability of merging, tied to variations in the IMF.

Maynard, Nelson C.↗
DOE OSTI2026

Overview of ST40 results and future: expanding the physics basis of high-field spherical tokamaks

The goal of the ST40 programme is to explore the physics of high-field spherical tokamaks (STs), to validate empirical and theoretical models and, hence, to build confidence in predictions required to support the design of future generations of STs. ST40 is a compact high-field ST that has achieved the following parameters: R 0 = 0.4–0.55 m, I p = 0.20–0.85 MA, B t (R= 0.4 m) = 0.7–2.1 T, κ ⩽ 1.9, and A = 1.6–1.9. Highlights of recent experimental results include (i) H-mode and confinement studies at B t ⩽ 2.1 T, (ii) observation of bifurcation of the scrape-off-layer power fall-off width, λ q , into a ‘wide’ branch that follows existing H-mode scalings and a ‘narrow’ branch that exhibits λ q values that are up to 10 times lower than the predictions of established scalings, (iii) development of high-performance scenarios with plasma current, I p , up to 0.85 MA, (iv) development of highly non-inductive scenarios with high β p , and (v) the first ST40 experiments utilising the newly commissioned impurity powder dropper. The work on all these topics has been supported by a number of advancements in ST40 hardware and software, from plasma control to data analysis and interpretation. At the end of 2025, ST40 embarked on a major upgrade to further expand its capabilities by introducing, among other improvements, all-metal plasma-facing components, 1 MW of electron cyclotron heating, a pellet injector, and a pair of lithium evaporators for wall conditioning.

confinement↗
DOE OSTI2022

Schmid factor crack propagation and tracking crystallographic texture markers of microstructural condition in direct energy deposition additive manufacturing of Ti-6Al-4V

Metallic additive manufacturing (AM) provides a customizable and tailorable manufacturing process for new engineering designs and technologies. The greatest challenge currently facing metallic AM is maintaining control of microstructural evolution during solidification and any solid state phase transformations during the build process. Ti-6Al-4V has been extensively surveyed in this regard, with the potential solid state and solidification microstructures explored at length. In this study, we evaluate the applicability of previously determined crystallo- graphic markers of microstructural condition observed in electron beam melting powder bed fusion (PBF-EB) builds of Ti-6Al-4V in a directed energy deposition (DED) build process. The aim of this effort is to elucidate whether or not these specific crystallographic textures are useful tools for indicating microstructural conditions in AM variants beyond PBF-EB. Parent β-Ti grain size was determined to be directly related to α-Ti textures in the DED build process, and the solid state microstructural condition could be inferred from the intensity of specific α-Ti orientations. Qualitative trends on the as-solidified β-Ti grain size were also determined to be related to the presence of a fiber texture, and proposed as a marker for as-solidified grain size in any cubic metal melted by AM. Analysis of the DED Ti-6Al-4V build also demonstrated a near complete fracture of the build volume, suspected to originate from accumulated thermal stresses in the solid state. Crack propagation was found to only appreciably occur in regions of slow cooling with large α +β colonies. Schmid factors for the basal and prismatic α-Ti systems explained the observed crack pathway, including slower bifurcation in colonies with lower Schmid factors of both slip systems. Colony morphologies and localized equiaxed β-Ti solidification were also found to originate from build pauses during production and uneven heating of the build edges during deposition. Tailoring of DED Ti-6Al-4V microstructures with the insight gained here is proposed, along with cautionary insight on preventing unplanned build pauses to maintain an informed and controlled thermal environment for microstructural control.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Simulations of divertor plasmas with inverse sheaths

The effect of strong electron emission from material surfaces has been proposed to form an “inverse sheath”: a region with a positive potential relative to the near-wall plasma which prevents the flow of ions to the wall [M. D. Campanell, “Negative plasma potential relative to electronemitting surfaces,” Phys. Rev. E. 88, 033103 (2013); M. D. Campanell and M. V. Umansky, “Strongly emitting surfaces unable to float below plasma potential,” Phys. Rev. Lett. 116, 1–5 (2016); M. D. Campanell and G. R. Johnson, “Thermionic cooling of the target plasma to a sub-ev temperature,” Phys. Rev. Lett. 122, 1–5 (2019)]. We assess the viability of this regime in a tokamak device using the 2D edge plasma transport code UEDGE [T. Rognlien et al ., “A fully implicit, time dependent 2-D fluid code for modeling tokamak edge plasmas,” J. Nucl. Mater. 196–198, 347–351 (1992)]. Since the UEDGE code does not consider the sheath region directly, we apply boundary conditions at the divertor targets which emulate the physics of both “standard” and “inverse” sheath regimes [R. Masline et al ., “Influence of the inverse sheath on divertor plasma performance in tokamak edge plasma simulations,” Contrib. Plasma Phys. 60, e201900097 (2020)]. Using these boundary conditions, we perform scoping studies to assess plasma parameters near the target by varying the density at the core-edge interface. We observe a smooth transition in the resultant profiles of plasma parameters for the standard sheath, and a bifurcation across the simulation set for plasmas with an inverse sheath. The cause of this bifurcation is assessed by performing the parameter scan both with and without impurity radiation; we observe that the bifurcation persists in both cases, indicating that this bifurcation is caused by plasma recombination.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Nonlinear modeling of the scaling law for the m/n = 3/2 error field penetration threshold

The scaling law for the m/n=3/2 error field (EF) penetration threshold is predicted numerically based on nonlinear single-fluid and two-fluid modeling using the TM1 code. The simulated penetration threshold of radial magnetic field b r at the plasma edge is scaled to the electron density n e , temperature T e , viscous time τ μ , toroidal field B t and the natural frequency ω in the form of b r /B t ∝n e αn T e αT τ μ αμ B t αB ω αω by scanning these parameters separately. Here, α n , α T , α μ , α B and α ω are the scaling coefficients on n e , T e , τ μ , B t and ω, respectively. Single-fluid modeling shows that the 3/2 EF threshold scales as b r /B t ∝n e 0.56 T e 0.6 τ μ -0.59 B t -1.15 ω, which is similar with the analytical scaling law in both the Rutherford and visco-resistive regimes. Yet, two-fluid modeling shows that the scaling law differs significantly in particular regarding the dependence on plasma rotation. In detail, the scaling coefficient α n on density decreases from 0.67 to 0.56 and α T on temperature decreases from 0.67 to 0.32, while α μ on viscous time is around -0.45 and α B on toroidal field decreases slightly from -1.15 to -1, when the ratio |ω E /ω *e | between plasma rotation frequency ω E and diamagnetic drift frequency ω *e varies from 0 to 10. Scans of the plasma rotation reveals that the penetration threshold linearly depends on the perpendicular rotation frequency (or natural frequency) ω ⊥e =ω E +ω *e , and there is a minimum in the required field amplitude when ω ⊥e 0. In addition, the enduring mystery of non-zero penetration threshold at zero plasma natural frequency in EF experiments is resolved by two-fluid simulations. We report that the very small island and smooth bifurcation in EF penetration near zero frequency is hard to detect in the experiment, leading to a finite penetration threshold within the capability of the experimental measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

An optimization-based approach to tailor the mechanical response of soft metamaterials undergoing rate-dependent instabilities

An optimization-based design framework is proposed to tune the response of soft metamaterials involving both geometric instabilities and nonlinear viscoelastic material behavior. Designing the response of soft metamaterials to harness instabilities and undergo large, tailored configuration changes will enable advancements in soft robotics, shock and vibration mitigation, and flexible electronics. In line with the metamaterial concept, the response of these materials is governed to a large extent by the geometric and topological makeup of their small-scale features. However, the link between structure and response is less intuitive for soft metamaterials due to their reliance upon highly nonlinear responses triggered by geometric instabilities. This is further complicated by the effects of viscoelastic relaxation, which recent studies have shown to alter the emergence of instabilities in non-intuitive ways. Here, these effects are accounted for in our framework to achieve various design objectives, including tailored force–displacement response and maximized energy absorption from both geometric and material effects. To fully automate this process, it is essential to have a completely robust equation solver for forward problems involving instabilities and viscoelastic relaxation. We achieve this by casting the search for stable mechanical equilibrium — i.e. the forward problem — as a minimization problem and utilize a trust region algorithm to robustly handle instabilities and follow energetically-favorable equilibrium paths through critical points.

97 MATHEMATICS AND COMPUTING↗