Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Edge Based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Technical consulting services for earth resources program

Evaluations of several sets of test data which show a normal amount of variability in gamma and Dmax on KODAK Aerial Duplicating Film (ESTAR Base) SO-467 are reported. Kodak is now furnishing to engineers at GSFC a full set of test data for each coating of SO-467 film. Glass-enclosed sensitometer step tablets which are being made for the Herrnfeld instrument at GSFC are discussed. These tablets include a gray scale and uniformity check areas as well as tribar resolution patterns imaged in a durable chromium layer. It is recommended that the Sioux Falls EDC procure four new enlarging printers and study the value and economics of a system for printer automation based on edge coding.

Source record↗
NASA NTRS1975

Correlation of boundary layer quantities for hypersonic laminar flows with zero pressure gradient for several gases

The laminar boundary layer has been theoretically studied for six gases for flows over cold walls with zero pressure gradient at Mach numbers between 5.5 and 12.5 to correlate boundary layer quantities for the various gases. The flow conditions considered correspond to those that can be generated in test facilities such as the shock tunnel and the expansion tube. Computed results obtained using real gas properties indicate that the Eckert number based on edge conditions serves to correlate the results in terms of the wall shear stress and enthalpy gradient, the Stanton number, and the momentum thickness for the various gases within plus or minus 10 per cent for Te = Tw and Te approximately 3Tw. Computed Reynolds analogy factors exhibit very good agreement with those predicted by the Colburn analogy. Velocity and displacement thicknesses correlate well with Eckert number for Te = Tw, but fail to correlate for Te approximately 3Tw. Differences in results are traced to property variations. Results show that the Eckert number is a significant correlating variable for the flows considered.

Cook, W. J.↗
NASA NTRS1981

Progress on interacting boundary-layer computations at high Reynolds number

The purpose of this paper is to review progress made in the solution of the interacting boundary-layer equations for subsonic flow. The interrelationship of triple deck theory and the interacting boundary-layer approach is discussed with emphasis placed on the development of efficient and reliable algorithms for the solution of the interacting boundary-layer equations. Example studies are presented for laminar and turbulent finite flat plate flow, laminar flow past a flat plate with a separation causing depression, and laminar and turbulent flow past a blunt based trailing edge.

Davis, R. T.↗
NASA NTRS1984

Investigation of TM Band-to-band Registration Using the JSC Registration Processor

The JSC registration processor performs scene-to-scene (or band-to-band) correlation based on edge images. The edge images are derived from a percentage of the edge pixels calculated from the raw scene data, excluding clouds and other extraneous data in the scene. Correlations are performed on patches (blocks) of the edge images, and the correlation peak location in each patch is estimated iteratively to fractional pixel location accuracy. Peak offset locations from all patches over the scene are then considered together, and a variety of tests are made to weed out outliers and other inconsistencies before a distortion model is assumed. Thus, the correlation peak offset locations in each patch indicate quantitatively how well the two TM bands register to each other over that patch of scene data. The average of these offsets indicate the overall accuracies of the band-to-band registration. The registration processor was also used to register one acquisition to another acquisition of multitemporal TM data acquired over the same ground track. Band 4 images from both acquisitions were correlated and an rms error of a fraction of a pixel was routinely obtained.

Yao, S. S.↗
NASA NTRS1985

Optimal frequency domain textural edge detection filter

An optimal frequency domain textural edge detection filter is developed and its performance evaluated. For the given model and filter bandwidth, the filter maximizes the amount of output image energy placed within a specified resolution interval centered on the textural edge. Filter derivation is based on relating textural edge detection to tonal edge detection via the complex low-pass equivalent representation of narrowband bandpass signals and systems. The filter is specified in terms of the prolate spheroidal wave functions translated in frequency. Performance is evaluated using the asymptotic approximation version of the filter. This evaluation demonstrates satisfactory filter performance for ideal and nonideal textures. In addition, the filter can be adjusted to detect textural edges in noisy images at the expense of edge resolution.

Townsend, J. K.↗
NASA NTRS1988

Marine stratocumulus cloud fields off the coast of southern California observed using Landsat imagery. I - Structural characteristics

The structural characteristics of stratocumulus cloud fields off the coast of southern California are investigated using Landsat Multispectral Scanner imagery. Twelve scenes in this area are examined along with three other stratocumulus scenes near San Francisco, over central Oregon, and in the Gulf of Mexico. Results from this initial study of stratocumulus clouds indicate that cloud-background threshold selection techniques based upon edge detection gradient assumptions are not appropriate for cloud segmentation and classification algorithms, cloud size distributions obey a power law, and cell horizontal aspect ratio increases with cell diameter. It was also found that stratocumulus clouds are bifractal in nature with fractal dimension of d of about 1.2 for cells with diameter D smaller than 0.5 km and d of about 1.5 for cells with D greater than 0.5 km; stratocumulus cloud fields appear to be homogeneous over regions of about 100 km x 100 km, a much smaller region than the 2.5-deg x 2.5-deg boxes to be used in the ISCCP regional averaging algorithms; and that structural properties of stratocumulus clouds observed off the coast of southern California are similar to those observed for stratocumulus clouds at three other locations.

Welch, R. M.↗
NASA NTRS1988

An efficient high-frequency analysis of modal reflection and transmission coefficients for a class of waveguide discontinuities

A high-frequency analysis of electromagnetic modal reflection and transmission coefficients is presented for waveguide discontinuities formed by joining different waveguide sections. The analysis uses an extended version of the concept of geometrical theory of diffraction based equivalent edge currents in conjunction with the reciprocity theorem to describe interior scattering effects. If the waveguide modes and their associated modal rays can be found explicitly, general two- and three-dimensional waveguide geometries can be analyzed. Expressions are developed for two-dimensional reflection and transmission coefficients. Numerical results are given for a flanged, semi-infinite parallel plate waveguide and for the junction between two linearly tapered waveguides.

Pathak, P. H.↗
NASA NTRS1990

Applied technology center business plan and market survey

Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

Hodgin, Robert F.↗
NASA NTRS1989

The use of a Navier-Stokes code in the wing design process

The feasibility was determined of incorporating the Navier-Stokes computational code, CFL3D, into the supersonic wing design process. The approach taken is of two steps. The first step was to calibrate CFL3D against existing experimental data sets obtained on thin sharp edged delta wings. The experimental data identified six flow types which are dependent on the similarity parameters of Mach number and angle of attack normal to the leading edge. The calibration showed CFL3D capable of simulating these various separated and attached flow conditions. The second step was to use CFL3D to study the initial formation of leading edge separation over delta wings at supersonic speeds. This consisted of examining solutions obtained on a 65 deg delta wing at Mach number of 1.6 with varying cross sectional shapes. Reynolds number was held constant at 1000000 and the Baldwin-Lomax turbulence model was used. The study showed that through the use of leading edge radius and/or camber, the onset of leading edge separation can be delayed to a higher angle of attack than observed on a flat sharp edged wing. Based on the geometries studied, three wind tunnel models are being designed to verify these results.

Mcmillin, S. Naomi↗
NASA NTRS1993

Prediction of thermal cycling induced cracking in polymer matrix composites

This report summarizes the work done in the period February 1993 through July 1993 on the 'Prediction of Thermal Cycling Induced Cracking In Polymer Matrix Composites' program. An oral presentation of this work was given to Langley personnel in September of 1993. This document was prepared for archival purposes. Progress studies have been performed on the effects of spatial variations in material strength. Qualitative agreement was found with observed patterns of crack distribution. These results were presented to NASA Langley personnel in November 1992. The analytical methodology developed by Prof. McManus in the summer of 1992 (under an ASEE fellowship) has been generalized. A method for predicting matrix cracking due to decreasing temperatures and/or thermal cycling in all plies of an arbitrary laminate has been implemented as a computer code. The code also predicts changes in properties due to the cracking. Experimental progressive cracking studies on a variety of laminates were carried out at Langley Research Center. Results were correlated to predictions using the new methods. Results were initially mixed. This motivated an exploration of the configuration of cracks within laminates. A crack configuration study was carried out by cutting and/or sanding specimens in order to examine the distribution of cracks within the specimens. These investigations were supplemented by dye-penetrant enhanced X-ray photographs. The behavior of thin plies was found to be different from the behavior of thicker plies (or ply groups) on which existing theories are based. Significant edge effects were also noted, which caused the traditional metric of microcracking (count of cracks on a polished edge) to be very inaccurate in some cases. With edge and configuration taken into account, rough agreement with predictions was achieved. All results to date were reviewed with NASA Langley personnel in September 1993.

Mcmanus, Hugh L.↗
NASA NTRS2002

Non-Radiative Shocks in the Cygnus Loop: H2 in HH2 Fluorescence or Collisions?

Far Ultraviolet Spectroscopic Explorer (FUSE) observations at four positions across a faint H-alpha filament in the northern Cygnus Loop were carried out successfully. The O(VI) profiles were measured in the four spectra, and we are in the process of fitting them. We have constructed models for a rippled sheet of emission seen almost edge-on based on non-radiative shock wave models for the time-dependent ionization state of the gas behind the shock. The function that describes the rippled sheet geometry predicts the line-of sight velocity component, and we add thermal broadening for various assumed values of ion-ion and ion-electron equilibration. We then compute the radiative transfer in each of the O(VI) lines along the line of sight. Finally, we multiply by the transmission of the ISM using average O(VI) column densities. So far, it appears that partial thermal equilibration is required. Neither full equilibration nor total lack of equilibration seems to provide a workable model. The HH2 observations have not yet been obtained. FUSE has many targets in this region of the sky. We are hoping to get the observations in the spring if FUSE pointing stability allows.

Raymond, John C.↗
NASA NTRS2002

Third Generation RLV Structural Seal Development Programs at NASA GRC

NASA GRC's work on high temperature structural seal development began in the late 1980's and early 1990's under the NASP (National Aero-Space Plane) project. Bruce Steinetz led the in-house propulsion system seal development program and oversaw industry efforts for propulsion system and airframe seal development for this vehicle. a propulsion system seal location in the NASP engine is shown. The seals were located along the edge of a movable panel in the engine to seal the gap between the panel and adjacent engine sidewalls. More recently, we worked with Rocketdyne on high temperature seals for the linear aerospike engine ramps. In applications such as the former X-33 program, multiple aerospike engine modules would be installed side by side on the vehicle. Seals are required in between adjacent engine modules along the edges and base of the engines. The seals have to withstand the extreme temperatures produced byt he thrusters at the top of the ramps while accommodating large deflections between adjacent ramps. We came up with several promising seal concepts for this application and shared them with Rocketdyne.

Dunlap, Patrick H., Jr.↗
NASA NTRS2002

Discrete Roughness Effects on Shuttle Orbiter at Mach 6

Discrete roughness boundary layer transition results on a Shuttle Orbiter model in the NASA Langley Research Center 20-Inch Mach 6 Air Tunnel have been reanalyzed with new boundary layer calculations to provide consistency for comparison to other published results. The experimental results were previously obtained utilizing the phosphor thermography system to monitor the status of the boundary layer via global heat transfer images of the Orbiter windward surface. The size and location of discrete roughness elements were systematically varied along the centerline of the 0.0075-scale model at an angle of attack of 40 deg and the boundary layer response recorded. Various correlative approaches were attempted, with the roughness transition correlations based on edge properties providing the most reliable results. When a consistent computational method is used to compute edge conditions, transition datasets for different configurations at several angles of attack have been shown to collapse to a well-behaved correlation.

Berry, Scott A.↗
NASA NTRS2006

Spatial Resolution Characterization for Aerial Digital Imagery

The U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration have jointly conducted characterizations of aerial digital imagery from commercial data providers. In a typical scenario, a vendor acquired imagery over the Stennis Space Center test range and provided a common data package to SSC. SSC personnel analyzed the geopositional accuracy and spatial resolution of the images, then documented the characterization results in a report and delivered the report to the USGS. Spatial resolution characterization was based on edge response measurements using one of the SSC edge targets and the tilted-edge technique. Relative Edge Response (RER) has been estimated for aerial digital imagery from several commercial data providers. RER is one of the engineering parameters used in the General Image Quality Equation to provide predictions of imaging system performance expressed in terms of the National Imagery Interpretability Rating Scale.

Blonski, Slawomir↗
NASA NTRS2000

Method for welding an article and terminating the weldment within the perimeter of the article

An article is welded, as in weld repair of a defect, by positioning a weld lift-off block at a location on the surface of the article adjacent to the intended location of the end of the weldment on the surface of the article. The weld lift-off block has a wedge shape including a base contacting the surface of the article, and an upper face angled upwardly from the base from a base leading edge. A weld pool is formed on the surface of the article by directly heating the surface of the article using a heat source. The heat source is moved relative to the surface of the article and onto the upper surface of the weld lift-off block by crossing the leading edge of the wedge, without discontinuing the direct heating of the article by the heat source. The heating of the article with the heat source is discontinued only after the heat source is directly heating the upper face of the weld lift-off block, and not the article.

Smashey, Russell W.↗
NASA NTRS2015

Fabrication of Feedhorn-Coupled Transition Edge Sensor Arrays for Measurement of the Cosmic Microwave Background Polarization

Characterization of the minute cosmic microwave background (CMB) polarization signature requires multi-frequency high-throughput precision instrument systems. We have previously described the detector fabrication of a 40 gigahertz focal plane and now describe the fabrication of a 37-element dual-polarization detector module for measurement of the CMB at 90 gigahertz. The 72-TES (Transition Edge Sensor)-based bolometers in each module are coupled to a niobium-based planar orthomode transducer with integrated band defining filters implemented in microstrip transmission line. A single crystal silicon dielectric substrate serves as microstrip dielectric and as a thermal link between the membrane isolated MoAu TES operating at 150 millikelvins and the heat bath. A short silicon leg between the heat bath and the TES bolometer is designed for ballistic phonon transport and provides improved process control and uniformity of thermal conductance in the presence of phonon scattering on roughened surfaces. Micro-machined structures are used to realize the orthomode transducer backshort, provide out of band signal rejection, and a silicon photonic choke for feedhorn coupling are described. The backshort, choke wafer, and detector wafer are indium bump-bonded to create a single 37-element dual-polarization detector module. Fourteen such hexagonally shaped modules each 80 millimeters in size comprise two focal planes. These, along with the recently delivered 40 gigahertz focal plane, will survey a large fraction of the sky as part of the Johns Hopkins University-led ground-based CLASS (Cosmology Large Angular Scale Surveyor) telescope.

Detectors↗