Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPLOSIVE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Effects Of Rapid Crushing On Composites

Experimental study described in NASA technical memorandum performed to determine whether crash energy-absorption capabilities of graphite/epoxy and Kevlar/epoxy composite materials are functions of speed of crushing. Additional objective to develop understanding of mechanisms of crushing. Technology applied to enhancement of safety and crashworthiness of automobiles, design of energy-absorbing devices in machinery, and problems involving explosions and impacts.

Farley, Gary L.↗
NASA NTRS1990

Improvement of pump tubes for gas guns and shock tube drivers

In a pump tube, a gas is mechanically compressed, producing very high pressures and sound speeds. The intensely heated gas produced in such a tube can be used to drive light gas guns and shock tubes. Three concepts are presented that have the potential to allow substantial reductions in the size and mass of the pump tube to be achieved. The first concept involves the use of one or more diaphragms in the pump tube, thus replacing a single compression process by multiple, successive compressions. The second concept involves a radical reduction in the length-to-diameter ratio of the pump tube and the pump tube piston. The third concept involves shock heating of the working gas by high explosives in a cyclindrical geometry reusable device. Preliminary design analyses are performed on all three concepts and they appear to be quite feasible. Reductions in the length and mass of the pump tube by factors up to about 11 and about 7, respectively, are predicted, relative to a benchmark conventional pump tube.

Bogdanoff, D. W.↗
NASA NTRS2016

Recent Advances in Commercial Memories and Potential Contribution to GN&C Miniaturation

The last few years have seen a surge in technology, device, and architecture introductions in commercial memories such as SDRAM and NAND driven by the explosion of handheld and portable electronics. Some of the resultant devices provide high density in very small and light packages, which may be possible to leverage for the miniaturization of future GN&C systems in addition to providing considerable memory capacity to enable advanced capabilities such as image-based navigation or adaptive/autonomous operations. We will show that these advanced SDRAM and NAND technologies are worth serious consideration for the next generation of GN&C needs by highlighting reliability and radiation effects results from some of these devices.

Yang-Scharlotta, Jean Y.↗
NASA NTRS1984

Experiments on water/melt explosions, nature of products, and models of dispersal

Experiments were carried out in a steel pressure device using controlled amounts of water and thermite melt to examine the mechanical energy released on explosive mixing following the initial contact of the two materials. An experimental design was used to allow the direct calculation of the mechanical energy by the dynamic lift of the device as recorded both optically and physically. A large number of experiments were run to accurately determine the optimum mixture of water and melt for the conversion of thermal to mechanical energy. The maximum efficiency observed was about 12% at a water/thermite mass ratio of 0.50. These experiments are the basis for the development of models of hydroexplosions and melt fragmentation. Particles collected from the experimental products are similar in size and shape to pyroclasts produced by much larger hydrovolcanic explosions. Melt rupture at optimum ratios produces very fine particles whereas rupture at high or low water/melt ratios produces large melt fragments. Grain surface textures in the experimental products are also related to the water/melt ratio and the mechanism of explosive mixing. It is thus possible to have qualitative information about the nature of the explosion from the sizes and shapes of the fragments produced.

Sheridan, M. F.↗
NASA NTRS1994

Initiation current measurements for hot bridgewire devices

One-shot type testing of hot bridgewire explosive cartridges provides the weakest possible firing characteristic data. One-shot type testing includes the Bruceton and the Probit methods, and all their off-shoots. One-shot testing is used for only one reason: the fear of 'dudding.' Modern programmable power supplies and oscilloscopes can now be used to obtain data with no fear of dudding. Any continued use of these old, one-shot type test methods is irresponsible behavior. Our society deserves better testing methods and will get them through the courts if we cannot make these changes on our own.

OBarr, Gerald L.↗
NASA NTRS1975

Thermal coupling apparatus for electroexplosive devices

This paper describes the equipment for nondestructive testing of electroexplosive devices using a thermal coupling technique. The technique utilizes a self-balancing bridge to apply a nominal amount of power to the bridge wire of the device. The bridge wire behaving as a thermal sensor detects heat flow into the device when heat is preferentially directed down the center of the explosive column toward the bridge wire. Thermal equilibrium is upset and the change in power from the self-balancing bridge is measured directly in watts. Faults such as omissions, incorrect materials, contamination, and so on, can be detected by observing the rate of heat flow to the bridge wire. The response is indicative of the thermal resistance and diffusivity of the system. The paper also presents data on electroexplosive devices loaded with inert and explosive materials.

Menichelli, V. J.↗
NASA NTRS1974

A varistor technique to reduce the hazards of electrostatics to electroexplosive devices

Inherent to the design and construction of electroexplosive devices is a vulnerability to inadvertent initiation from electrostatic discharges. The small spacing (approx. 1 mm) between the bridgewire circuits and the body and between bridgewire circuits afford easy breakdown paths for electrostatic voltages. In some cases where metallic component pyrotechnic materials are loaded onto the bridgewire circuits the susceptability to inadvertant initiation is increased. An approach to solving this problem is reported based on the application of a new varistor (nonlinear resistor) material. Certain formulations of metal oxides normally have electrically nonconductive characteristics. However, at selective potentials they become conductive. By proper design and incorporation into electroexplosive devices a variety of breakdown potentials can be achieved. The breakdown potential of the varistor element can be adjusted to meet the requirements of the particular electroexplosive device. The varistor element can also be incorporated in an area isolated from the explosive or pyrotechnic material. Adaptation of this technique to a specific electroexplosive device and the resulting test data are presented.

Menichelli, V. J.↗
NASA NTRS1971

Monitoring of explosive/pyrotechnic performance.

Utilization of performance monitoring techniques for acceptance, lot qualification, and comparison testing, as well as to provide engineering guidelines for systems design. Test techniques and apparatus have been developed to evaluate the performance of squibs, initiators, gas generating cartridges, detonators, and linear explosives for aerospace applications. A variety of devices has been tested in each of these apparatuses, including the Apollo Standard Initiator, the Apollo End Detonating Cartridge, and the mild detonating fuse and flexible linear shaped charge.

Bement, L. J.↗
NASA NTRS1983

The 17th Aerospace Mechanisms Symposium

The proceedings of the Aerospace Mechanisms Symposium are reported. Technological areas covered include space lubrication, aerodynamic devices, spacecraft/Shuttle latches, deployment, positioning, and pointing. Devices for spacecraft tether, magnetic bearing suspension, explosive welding, and a deployable/retractable mast are also described.

Source record↗
NASA NTRS1996

Report on Alternative Devices to Pyrotechnics on Spacecraft

Pyrotechnics accomplish many functions on today's spacecraft, possessing minimum volume/weight, providing instantaneous operation on demand, and requiring little input energy. However, functional shock, safety, and overall system cost issues, combined with emergence and availability of new technologies question their continued use on space missions. Upon request from the National Aeronautics and Space Administration's (NASA) Program Management Council (PMC), Langley Research Center (LaRC) conducted a survey to identify and evaluate state-of-the-art non-explosively actuated (NEA) alternatives to pyrotechnics, identify NEA devices planned for NASA use, and investigate potential interagency cooperative efforts. In this study, over 135 organizations were contacted, including NASA field centers, Department of Defense (DOD) and other government laboratories, universities, and American and European industrial sources resulting in further detailed discussions with over half, and 18 face-to-face briefings. Unlike their single use pyrotechnic predecessors, NEA mechanisms are typically reusable or refurbishable, allowing flight of actual tested units. NEAs surveyed include spool-based devices, thermal knife, Fast Acting Shockless Separation Nut (FASSN), paraffin actuators, and shape memory alloy (SMA) devices (e.g., Frangibolt). The electro-mechanical spool, paraffin actuator and thermal knife are mature, flight proven technologies, while SMA devices have a limited flight history. There is a relationship between shock, input energy requirements, and mechanism functioning rate. Some devices (e.g., Frangibolt and spool based mechanisms) produce significant levels of functional shock. Paraffin, thermal knife, and SMA devices can provide gentle, shock-free release but cannot perform critically timed, simultaneous functions. The FASSN flywheel-nut release device possesses significant potential for reducing functional shock while activating nearly instantaneously. Specific study recommendations include: (1) development of NEA standards, specifically in areas of material characterization, functioning rates, and test methods; (2) a systems level approach to assure successful NEA technology application; and (3) further investigations into user needs, along with industry/government system-level real spacecraft cost benefit trade studies to determine NEA application foci and performance requirements. Additional survey observations reveal an industry and government desire to establish partnerships to investigate remaining unknowns and formulate NEA standards, specifically those driven by SMAs. Finally, there is increased interest and need to investigate alternative devices for such functions as stage/shroud separation and high pressure valving. This paper summarizes results of the NASA-LaRC survey of pyrotechnic alternatives. State of-the-art devices with their associated weight and cost savings are presented. Additionally, a comparison of functional shock characteristics of several devices are shown, and potentially related technology developments are highlighted.

Lucy, M. H.↗
NASA NTRS2018

Combustion Stability Evaluation of Artificial Disturbance Dynamic Response

General guidelines are provided in CPIA Publication 6551 for evaluation of the response due to an artificial disturbance, however the guideline also allows for ambiguous interpretation. Stability rating devices that produce an artificial disturbance are traditionally explosive bombs and pulse guns. This paper reviews a recently developed objective process that can be applied consistently in the reduction of artificial disturbance dynamic data. It also examines three methods of response evaluation. The first method examines the response of a specific mode of interest and requires data filtering encompassing that mode. The second method examines the response of a specific mode of interest and its nonlinear components and requires a more complex filtering scheme. The third method examines the response of the entire dynamic system and consists of examining a wide bandwidth consisting of multiple modes of interest. The evaluation process is described and the advantages and disadvantages of the evaluation methods are discussed. Signal processing is used as a tool in quantifying the assessment, clearly as an improvement from the subjective heritage approach consisting primarily of engineering judgement. Data for several engines and components have been compiled and evaluated using these methods. A summary of these combustion devices is provided and observations are discussed.

Casiano, M. J.↗
DOE OSTI2026

Prioritizing Uncertainties in Hydrogen Contribution to Risk in Post-Crash Outcomes for Rail

This report presents analysis from Sandia National Laboratories predicting contributions to risk associated with the use of hydrogen technology for rail. Event sequence diagrams are used to describe possible accident scenarios and progressions. Initiating event frequencies and branch event probabilities for each scenario are quantified with uncertainty using distributions fit to Federal Railroad Administration and U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration data on applicable accidents from 2000 to 2020. Uncertainty is propagated through the event sequence diagram to estimate the frequency and conditional probability of accident end states. The analysis identifies four scenarios with significant contributions to risk from hydrogen that are predicted to occur relatively frequently, which may inform priorities for reducing uncertainty. These scenarios are 1) overpressure events resulting from collisions with hydrogen release due to mechanical damage and delayed ignition, 2) jet fire events resulting from collisions with hydrogen release due to mechanical damage and immediate ignition, 3) jet fires resulting from fire or explosion initiating events involving the hydrogen tank and correct operation of the thermally-activated pressure relief device (TPRD) subsequent to the thermal insult, and 4) pressure burst resulting from fire or explosion initiating events involving the hydrogen tank and failure of the TPRD. Delayed and immediate hydrogen ignition probabilities are identified as being highly uncertain and potential candidates for reducing conservatism in the predicted frequencies for these two scenarios.

08 HYDROGEN↗
NASA NTRS1973

Experiments in gasdynamics of explosions.

Various topics concerning recent accomplishments in experimental studies of gasdynamics of explosions are reviewed. Detonations, shocks, and blast waves form these topics. The most important feature of current studies is the particular attention paid to transient processes and the concomitant progress made in the development of novel experimental means for the study of such processes. The most exciting prospects for the future are associated with possibilities of exploiting knowledge of explosion phenomena for the development of such interesting devices as the gasdynamic laser and the apparatus based on the use of lasers to achieve controlled thermonuclear reaction.

Oppenheim, A. K.↗
NASA NTRS1974

Safety of spacecraft lightweight pressure vessels

With the advent of the age of flight and specifically space flight, a major effort was devoted to the development of lightweight metallic flight hardware. The paper deals with metallic pressure vessels designed to hold liquids or gases under pressure and with the methods for assuring safety through elimination of failures. The consequences of discontinuity stress failures range from leakage, bursting, and detrimental deformation to catastrophic failure, or literally, an explosion of the vessel. Controls, system design, protective devices and tests are discussed.

Bolger, P. H.↗
NASA NTRS1994

Experimental investigation of nozzle/plume aerodynamics at hypersonic speeds

Much of the work involved the Ames 16-Inch Shock Tunnel facility. The facility was reactivated and upgraded, a data acquisition system was configured and upgraded several times, several facility calibrations were performed and test entries with a wedge model with hydrogen injection and a full scramjet combustor model, with hydrogen injection, were performed. Extensive CFD modeling of the flow in the facility was done. This includes modeling of the unsteady flow in the driver and driven tubes and steady flow modeling of the nozzle flow. Other modeling efforts include simulations of non-equilibrium flows and turbulence, plasmas, light gas guns and the use of non-ideal gas equations of state. New experimental techniques to improve the performance of gas guns, shock tubes and tunnels and scramjet combustors were conceived and studied computationally. Ways to improve scramjet engine performance using steady and pulsed detonation waves were also studied computationally. A number of studies were performed on the operation of the ram accelerator, including investigations of in-tube gasdynamic heating and the use of high explosives to raise the velocity capability of the device.

Bogdanoff, David W.↗
NASA NTRS1975

Programmed pulsing to initiation apparatus for electroexplosive testing

An electroexplosive device accepts electrical energy and converts it into heat which is used to initiate a primary explosion. Disadvantages of the current electroexplosive testing method have led to the development of a new testing procedure which is based on a principle of programmed pulsing to initiation. A series of stepwise increasing energy pulses is applied to the device which is tested until the initiation of the explosion occurs. The test principle is discussed along with the design of the apparatus.

Rosenthal, L. A.↗
NASA NTRS2015

Shape Memory Alloy Rock Splitters (SMARS) - A Non-Explosive Method for Fracturing Planetary Rocklike Materials and Minerals

A static rock splitter device based on high-force, high-temperature shape memory alloys (HTSMAs) was developed for space related applications requiring controlled geologic excavation in planetary bodies such as the Moon, Mars, and near-Earth asteroids. The device, hereafter referred to as the shape memory alloy rock splitter (SMARS), consisted of active (expanding) elements made of Ni50.3Ti29.7Hf20 (at.%) that generate extremely large forces in response to thermal input. The preshaping (training) of these elements was accomplished using isothermal, isobaric and cyclic training methods, which resulted in active components capable of generating stresses in excess of 1.5 GPa. The corresponding strains (or displacements) were also evaluated and were found to be 2 to 3 percent, essential to rock fracturing and/or splitting when placed in a borehole. SMARS performance was evaluated using a test bed consisting of a temperature controller, custom heaters and heater holders, and an enclosure for rock placement and breakage. The SMARS system was evaluated using various rock types including igneous rocks (e.g., basalt, quartz, granite) and sedimentary rocks (e.g., sandstone, limestone).

NiTiHf↗