Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPERIMENT RESULTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Comparative studies of aerosol extinction measurements made by the SAM II and SAGE II satellite experiments

Results from the Stratospheric Aerosol Measurement (SAM) II and Stratospheric Aerosol and Gas Experiment (SAGE) II are compared for measurement locations which are coincident in time and space. At 1.0 micron, the SAM II and SAGE II aerosol extinction profiles are similar within their measurement errors. In addition, sunrise and sunset aerosol extinction data at four different wavelengths are compared for occasions when the SAGE II and SAM II measurements are nearly coincident in space and about 12 hours apart.

Yue, Glenn K.↗

Supercritical microgravity droplet vaporization

Supercritical droplet vaporization is an important issue in many combustion systems, such as liquid fueled rockets and compression-ignition (diesel) engines. In order to study the details of droplet behavior at these conditions, an experiment was designed to provide a gas phase environment which is above the critical pressure and critical temperature of a single liquid droplet. In general, the droplet begins as a cold droplet in the hot, high pressure environment. In order to eliminate disruptions to the droplet by convective motion in the gas, forced and natural convection gas motion are required to be small. Implementation of this requirement for forced convection is straightforward, while reduction of natural convection is achieved by reduction in the g-level for the experiment. The resulting experiment consists of a rig which can stably position a droplet without restraint in a high-pressure, high temperature gas field in microgravity. The microgravity field is currently achieved by dropping the device in the NASA Lewis 2.2 second drop tower. The performance of the experimental device and results to date are presented.

Hartfield, J.↗

The PMIP4 Last Glacial Maximum experiments: preliminary results and comparison with the PMIP3 simulations

The Last Glacial Maximum (LGM, ∼ 21 000 years ago) has been a major focus for evaluating how well state-of-the-art climate models simulate climate changes as large as those expected in the future using paleoclimate reconstructions. A new generation of climate models has been used to generate LGM simulations as part of the Paleoclimate Modelling Intercomparison Project (PMIP) contribution to the Coupled Model Intercomparison Project (CMIP). Here, we provide a preliminary analysis and evaluation of the results of these LGM experiments (PMIP4, most of which are PMIP4-CMIP6) and compare them with the previous generation of simulations (PMIP3, most of which are PMIP3-CMIP5). We show that the global averages of the PMIP4 simulations span a larger range in terms of mean annual surface air temperature and mean annual precipitation compared to the PMIP3-CMIP5 simulations, with some PMIP4 simulations reaching a globally colder and drier state. However, the multi-model global cooling average is similar for the PMIP4 and PMIP3 ensembles, while the multi-model PMIP4 mean annual precipitation average is drier than the PMIP3 one. There are important differences in both atmospheric and oceanic circulations between the two sets of experiments, with the northern and southern jet streams being more poleward and the changes in the Atlantic Meridional Overturning Circulation being less pronounced in the PMIP4-CMIP6 simulations than in the PMIP3-CMIP5 simulations. Changes in simulated precipitation patterns are influenced by both temperature and circulation changes. Differences in simulated climate between individual models remain large. Therefore, although there are differences in the average behaviour across the two ensembles, the new simulation results are not fundamentally different from the PMIP3-CMIP5 results. Evaluation of large-scale climate features, such as land–sea contrast and polar amplification, confirms that the models capture these well and within the uncertainty of the paleoclimate reconstructions. Nevertheless, regional climate changes are less well simulated: the models underestimate extratropical cooling, particularly in winter, and precipitation changes. These results point to the utility of using paleoclimate simulations to understand the mechanisms of climate change and evaluate model performance.

Last Glacial Maximum↗

Simulation of Radiation Quantities for Accelerator-based Experiments

Results of the MARS15 code application to the design of target stations for two experiments – a muon-to-electron conversion experiment Mu2e and the prospective multi-purpose ProjectX Energy Station at Fermilab – are presented. A detailed MARS15 analysis has been carried out focusing on the most important radiation quantities such as displacements per atom (DPA), peak temperature and power density in the coils, absorbed dose in the insulation, dynamic heat load; DPA and neutron volumes, tritium production are also simulated for the ProjectX target, a benchmark of the neutron fission model is presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Performance of SMARTer at Very Low Scattering Vector q-Range Revealed by Monodisperse Nanoparticles

A monodisperse nanoparticle sample of polystyrene has been employed to determine performance of the 36 meter small-angle neutron scattering (SANS) BATAN spectrometer (SMARTer) at the Neutron Scattering Laboratory (NSL)--Serpong, Indonesia, in a very low scattering vector q-range. Detector position at 18 m from sample position, beam stopper of 50 mm in diameter, neutron wavelength of 5.66 A as well as 18 m-long collimator had been set up to achieve very low scattering vector q-range of SMARTer. A polydisperse smeared-spherical particle model was applied to fit the corrected small-angle scattering data of monodisperse polystyrene nanoparticle sample. The mean average of particle radius of 610 A, volume fraction of 0.0026, and polydispersity of 0.1 were obtained from the fitting results. The experiment results from SMARTer are comparable to SANS-J, JAEA - Japan and it is revealed that SMARTer is powerfully able to achieve the lowest scattering vector down to 0.002 A{sup -1}.

36 MATERIALS SCIENCE↗

CVEN 5899 Internship report

The internship is under the project of Center for Space and Earth Science student fellow program of Los Alamos National Laboratory (LANL). The topic of the project is grain-scale prediction of hypervelocity projectile penetration into terrestrial and extraterrestrial granular materials, which is also my PhD research topic. In this research, we would like to use discrete element method (DEM) to simulate the hyper-speed penetration into granular materials and compare with experiment results. The experiment is done by the Proton Radiography (pRad) team of LANL. In the experiment, a jet traveled through the sand with velocity of 4 km/s (fig.1). Our goal is to develop the large deformation constitutive model by the stress and strain upscaling, study the fluid (air) behavior and particle fracture during the hyperspeed penetration.

36 MATERIALS SCIENCE↗

Thermal evaluation of alternative shipping cask for irradiated experiments

Results of a thermal evaluation are provided for a new shipping cask under consideration for transporting irradiated experiments between the test reactor and post-irradiation examination (PIE) facilities. Most of the experiments will be irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL), then later shipped to the Hot Fuel Examination Facility (HFEF) located at the Materials and Fuels Complex for PIE. To date, the General Electric (GE)-2000 cask has been used to transport experiment payloads between these facilities. However, the availability of the GE-2000 cask to support future experiment shipping is uncertain. In addition, the internal cavity of the GE-2000 cask is too short to accommodate shipping the larger payloads. Therefore, an alternate shipping capability is being pursued. The Battelle Energy Alliance, LLC, Research Reactor (BRR) cask has been determined to be the best alternative to the GE-2000 cask. An evaluation of the thermal performance of the BRR cask is necessary before proceeding with fabrication of the newly designed cask hardware and the development of handling, shipping and transport procedures. This paper presents the results of the thermal evaluation of the BRR cask loaded with a representative set of fueled and non-fueled payloads. When analyzed with identical payloads, experiment temperatures were found to be lower with the BRR cask than with the GE-2000 cask. Furthermore, from a thermal standpoint, the BRR cask was found to be a suitable alternate to the GE-2000 cask for shipping irradiated experiment payloads.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The GlueX Experiment: First Results

GlueX is a nuclear physics experiment located at the Thomas Jefferson National Accelerator Facility designed to study and understand the nature of confinement in QCD by mapping the spectrum of exotic mesons. The experiment will be able to probe new areas by using photoproduction, i.e. the scattering on nucleon of ~9 GeV linearly polarized photons derived from the recently upgraded CEBAF with a 12 GeV electron beam. Spring 2016 has been characterized by a continued detector commissioning and initial running at the full design energy. The current status of the GlueX detector performance and data collection will be discussed, with a brief overview of first physics results, future run plans, and long term upgrades.

Fanelli, Cristiano (ORCID:0000000219851329)↗

The EOLE experiment: Early results and current objectives

The EOLE experiment with 480 constant level balloons released in the Southern Hemisphere is described. Each balloon floating freely at approximately the 200 mb level, is a precise tracer of the horizontal motion of air masses, the accuracy of which is limited only by the laminated structure of the stratospheric flow, within an RMS uncertainty of 1.5 m/sec. The balloons were found after 2 months to distribute at random over the whole hemisphere outside the tropics, irrespective of their original launching site. Early results of Eulerian and Lagrangian averages of the EOLE wind data are given for describing the mean 200 mb zonal and meridional circulations. The effect of the small scale eddies of two-dimensional turbulence has been studied with respect to the relative eddy diffusion of pairs of balloons and the relative dispersion of triangular clusters. New estimates of the RMS divergence of the 200 mb flow are given, together with their scale dependence which was found to be a logarithmic law.

Morel, P.↗

The Eole experiment - Early results and current objectives.

The Eole experiment with 480 constant level balloons released in the Southern Hemisphere is described. Each balloon, floating freely at approximately the 200-mb level, is a precise tracer of the horizontal motion of air masses, the accuracy of which is limited only by the laminated structure of the stratospheric flow, within an rms uncertainty of 1.5 m/sec. The balloons were found after 2 months to distribute at random over the whole hemisphere outside the tropics, irrespective of their original launching site. Early results of Eulerian and Lagrangian averages of the Eole wind data are given for describing the mean 200-mb zonal and meridional circulations.

Morel, P.↗

Plasma wave phenomena observed at interplanetary shocks by the Ulysses URAP experiment

Results of a study of 24 interplanetary shocks observed by the Unified Radio and Plasma Wave Experiment (URAP) on the Ulysses spacecraft are presented. These shocks, observed between approximately 1 and 4 AU, display a variety of wave phenomena similar to those detected in earlier studies of shocks near 1 AU. The correspondence of the observed low frequency magnetic and electric field waves with the parallel index of refraction for whistler waves was investigated. Observed B/E ratios are found to be typically about a factor of 0.7 times the computed index of refraction, supporting the whistler interpretation of these waves, but also implying a prevalent electrostatic wave component which may be due to whistlers propagating at an angle to the interplanetary magnetic field. A statistical correlation of the amplitudes of the various types of waves with shock and solar wind properties is presented.

Lengyel-Frey, D.↗

Investigation of space-charge effects in gaseous tritium as a source of distortions of the beta spectrum observed in the Troitsk neutrino-mass experiment

Results of searches for effects of space-charge accumulation in the gaseous tritium source in the Troitsk neutrino-mass experiment are presented. The broadening and the shift of the L3 line of conversion electrons in a {sup 83m}Kr gaseous source circulating together with tritium was investigated. The attained limit on the magnitude of fluctuations of the space-charge potential makes it possible to set a limit on the negative neutrino mass squared in the Troitsk neutrino-mass experiment (-0.8 < {Delta}m{sub {nu}}{sup 2} {<=} 0 eV{sup 2}), a spurious effect associated with this potential. A statistically reliable shift of the position of the L3 line is discovered. This indicates that processes of of space-charge accumulation do indeed proceed in the source at a level that is significant for the future experiment Katrin.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fission foil measurements of neutron and proton fluences in the A0015 experiment

Results are given from sets of fission foil detectors (FFD's) (Ta-181, Bi-209, Th-232, U-238) which were included in the A0015 experiment to measure combined proton/neutron fluences. Use has been made of recent FFD high energy proton calibrations for improved accuracy of response. Comparisons of track density measurements have been made with the predictions of environmental modeling based on simple 1-D (slab) geometry. At 1 g/cm(exp 2) (trailing edge) the calculations were approximately 25 percent lower than measurements; at 13 g/cm(exp 2) (Earthside) calculations were more than a factor of 2 lower. A future 3-D modeling of the experiment is needed for a more meaningful comparison. Approximate mission proton doses and neutron dose equivalents were found. At Earthside (13 g/cm(exp 2) the dose was 171 rad and dose equivalent was 82 rem. At the trailing edge (1 g/cm(exp 2) dose was 315 rad and dose equivalent was 33 rem. The proton doses are less than expected from TLD doses by 16 percent and 37 percent, respectively. These differences can be explained by uncertainties in the proton and neutron spectra and in the method used to separate proton and neutron contributions to the measurements.

Frank, A. L.↗

Tropospheric ozone in the vicinity of the ozone hole - 1987 Airborne Antarctic Ozone Experiment

Results are presented on ozone measurements in the upper troposphere/lower stratosphere over Antarctica, obtained by NASA DC-8 aircraft during the August/September 1987 Airborne Antarctic Ozone Experiment. The ozone mixing ratios as high as several hundred ppbv were measured, but in all cases these ratios were observed in pockets of upper atmospheric air, both in the vicinity of and away from the location of the ozone hole. The background ozone values in the surrounding troposphere were typically in the range of 20-50 ppbv. Correlation of tropospheric ozone observations with the boundaries of the ozone hole differed in the course of the experiment. During the August 28 - September 2 flights, encounters with ozone-rich air were limited, and the background tropospheric ozone appeared to decrease beneath the hole. For the later flights, and as the ozone hole deepened, the ozone-rich air was frequently observed in the vicinity of the hole, and the average ozone values at the flight altitude were frequently higher than the background values.

Gregory, Gerald L.↗

PHENIX experiment: Recent results

An overview of the latest physics results obtained in the PHENIX experiment by studying pp, dAu, and AuAu interactions at {radical}sNN = 200 GeV is given. Results of measurements of nuclear-modification factors, direct-photon production, and properties of light vector mesons and particles containing heavy c and b quarks are presented. These results are used to deduce information about the properties of dense parton matter produced in collisions of relativistic heavy nuclei at the Relativistic Heavy Ion Collider (RHIC).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Limb Infrared Monitor of the Stratosphere - Experiment description, performance, and results

An experiment and results, using a six-channel infrared radiometer aboard the Nimbus 7 spacecraft to sound the composition and structure of the middle atmosphere, are described. The measurement requirements are discussed, and critical instrument parameters are identified. Next, the instrument and its laboratory calibration are described. Temperature accuracy and precision are estimated to be 2 K and about 0.4 K respectively. Accuracy of the trace gas measurements is about 25 percent, comparable to the estimated accuracy of the in situ comparison data; their precision is about 0.25 ppmv for ozone and water vapor and 0.2 ppbv for nitric acid and nitrogen dioxide. Examples of the vertical profiles, maps, and cross sections of the data show previously unobserved variations with latitude, altitude, and time. The results demonstrate that infrared limb scanning is an extremely powerful method for sounding the middle atmosphere.

Gille, J. C.↗

Support of the Development of EPP Plus SMT Design Method (FY2020 Test Results)

Experiments in support of the development of the integrated Elastic–Perfectly Plastic (EPP) analysis and Simplified Model Test (SMT) design methodology continued in FY 2020. The previously developed single-bar SMT (SBSMT) technique was successfully extended to tubular shaped Alloy 617 specimens for evaluation of the effect of primary pressure load on SMT creep-fatigue (CF) properties at 950°C. A series of pressurized SMT tests were performed with various elastic follow-up factors and strain ranges. The results show that the primary pressure load reduces the SMT CF cycles. The reduction of SMT CF life due to primary load was found to be dependent on strain ranges, elastic follow up and test temperatures. These results are crucial for verification of the EPP strain range analysis in the EPP+SMT evaluation procedure. Additionally, hold time effect on the SMT CF life cycles is a determining factor for generating the EPP+SMT CF design curves. Lack of test data in the high cycle and low strain range region results in major uncertainty in developing the design curves. In FY2020, experiments were designed, and testing started on Alloy 617 at 950°C to fill the gap in experimental data. The on-going CF and additional SMT CF with elastic follow-up at low strain ranges will generate the information needed to verify the methods for extrapolation to long hold time and finalize the EPP+SMT design method.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗