SEARCH · Engineering Papers
Results for “EFFICIENCY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mesoporous Textured Fe-N-C Electrocatalysts as Highly Efficient Cathodes for Proton Exchange Membrane Fuel Cells
A new platinum group metal (PGM)-free proton exchange membrane fuel cell (PEMFC) cathode catalyst materials, synthesized using the VariPore™ method by Pajarito Powder, LLC, are characterized for their structure and activity. The physico-chemical analysis of the iron-nitrogen-carbon (Fe-N-C) electrocatalysts show mesoporous carbon material effectively doped with iron and nitrogen. The materials have an average pore size of 7-8 nm and high specific surface area. The Fe-N-C catalysts exhibit good oxygen reduction reaction (ORR) activity in 0.5 M H2SO4 electrolyte with high half-wave potential and sustainable electrochemical stability over 10,000 repeated potential cycles with insignificant losses in their activities. As cathode catalysts in a PEMFC, the Fe-N-C materials deliver remarkably good fuel cell performance at low overpotential approaching that of the commercial Pt catalyst. The high ORR electrocatalytic activity of these Fe-N-C catalysts is credited to the synergy between nitrogen-moieties, specifically pyrrolic-N, pyridinic-N, and graphitic-N, and iron in addition to the high mesoporosity that facilitate an effective reaction path in boosting the electrocatalytic activity and stability.
An Easily Prepared Monomeric Cobalt(II) Tetrapyrrole Complex That Efficiently Promotes the 4e – /4H + Peractivation of O 2 to Water
The selective 4e – /4H + reduction of dioxygen to water is an important reaction that takes place at the cathode of fuel cells. Monomeric aromatic tetrapyrroles (such as porphyrins, phthalocyanines, and corroles) coordinated to Co(II) or Co(III) have been considered as oxygen reduction catalysts due to their low cost and relative ease of synthesis. Furthermore, these systems have been repeatedly shown to be selective for O 2 reduction by the less desired 2e – /2H + pathway to yield hydrogen peroxide. Herein, we report the initial synthesis and study of a Co(II) tetrapyrrole complex based on a nonaromatic isocorrole scaffold that is competent for 4e – /4H + oxygen reduction reaction (ORR). This Co(II) 10,10-dimethyl isocorrole (Co[10-DMIC]) is obtained in just four simple steps and has excellent yield from a known dipyrromethane synthon. Evaluation of the steady state spectroscopic and redox properties of Co[10-DMIC] against those of Co porphyrin (cobalt 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin, [Co(TPFPP)]) and corrole (cobalt 5,10,15-tris(pentafluorophenyl)corrole triphenylphosphine, Co[TPFPC](PPh 3 )) homologues demonstrated that the spectroscopic and electrochemical properties of the isocorrole are distinct from those displayed by more traditional aromatic tetrapyrroles. Further, the investigation of the ORR activity of Co[10-DMIC] using a combination of electrochemical and chemical reduction studies revealed that this simple, unadorned monomeric Co(II) tetrapyrrole is ~85% selective for the 4e – /4H + reduction of O 2 to H 2 O over the more kinetically facile 2e – /2H + process that delivers H 2 O 2 . In contrast, the same ORR evaluations conducted for the Co porphyrin and corrole homologues demonstrated that these traditional aromatic systems catalyze the 2e – /2H + conversion of O 2 to H 2 O 2 with near complete selectivity. Despite being a simple, easily prepared, monomeric tetrapyrrole platform, Co[10-DMIC] supports an ORR catalysis that has historically only been achieved using elaborate porphyrinoid-based architectures that incorporate pendant proton-transfer groups or ditopic molecular clefts or that impose cofacially oriented O 2 binding sites. Accordingly, Co[10-DMIC] represents the first simple, unadorned, monomeric metalloisocorrole complex that can be easily prepared and shows a privileged performance for the 4e – /4H + peractivation of O 2 to water as compared to other simple cobalt containing tetrapyrroles.
Resource-Efficient Chemistry on Quantum Computers with the Variational Quantum Eigensolver and The Double Unitary Coupled-Cluster approach
Applications of quantum simulation algorithms to obtain electronic energies of molecules on noisy intermediate-scale quantum (NISQ) devices require careful consideration of resources describing the complex electron correlation effects. In modeling second-quantized problems, the biggest challenge confronted is that the number of qubits scales linearly with the size of molecular basis. This poses a significant limitation on the size of the basis sets and the number of correlated electrons included in quantum simulations of chemical processes. To address this issue and to enable more realistic simulations on NISQ computers, we employ the double unitary coupled-cluster (DUCC) method to effectively downfold correlation effects into the reduced-size orbital space, commonly referred to as the active space. Using downfolding techniques, we demonstrate that properly constructed effective Hamiltonians can capture the effect of the whole orbital space in small-size active spaces. Combining the downfolding pre-processing technique with the Variational Quantum Eigensolver, we solve for the ground-state energy of H2 and Li2 in the cc-pVTZ basis using the DUCC-reduced active spaces. We compare these results to full configuration-interaction and high-level coupled-cluster reference calculations.
Efficient Four-Component Dirac–Coulomb–Gaunt Hartree–Fock in the Pauli Spinor Representation
Four-component Dirac Hartree--Fock is an accurate mean-field method for treating molecular systems where relativistic effects are important. However, the computational cost and complexity of the two-electron interaction makes this method less common, even though we can consider the Dirac Hartree--Fock Hamiltonian the ``ground truth" of electronic structure, barring explicit quantum-electrodynamical effects. Being able to calculate these effects is then vital to the design of lower scaling methods for accurate predictions in computational spectroscopy and properties of heavy element complexes that must include relativistic effects for even qualitative accuracy. In this work, we present a Pauli quaternion formalism of maximal component- and spin-separation for computing the Dirac-Coulomb-Gaunt Hartree-Fock ground state, with a minimal floating-point-operation count algorithm. Furthermore, this approach also allows one to explicitly separate different spin physics from the two-body interactions, such as spin-free, spin-orbit, and the spin-spin contributions. Additionally, we use this formalism to examine relativistic trends in the periodic table, and analyze the basis set dependence of atomic gold and gold dimer systems.
High-Efficiency Zinc-Metal Anode Enabled by Liquefied Gas Electrolytes
Explore the source record for details and available documents.
Selective and Efficient Production of Biomass-Derived Vinylfurans
We describe a two-step catalytic process for the selective and rapid conversion of biomass-derived acetylfurans into vinylfurans. This is accomplished by nearly quantitatively reducing acetylfurans into furyl alcohols using a copper chromite catalyst and exploiting the promoter-like properties of ethanol, the solvent. Subsequently, furyl alcohol is dehydrated using solid-acid catalysts. Catalyst deactivation due to oligomeric species is a major issue, but the activity can be partially recovered by calcination. Optimization of reaction conditions showed that the selectivity could be increased by using nitrobenzene, a polar aprotic solvent. Here, the high-boiling point solvent allows the formation of vinylfurans with a selectivity of up to 85%; the product can be isolated in high purity by distillation.
Structure and dynamics of an α-fucosidase reveal a mechanism for highly efficient IgG transfucosylation
Explore the source record for details and available documents.
Rapid atom-efficient polyolefin plastics hydrogenolysis mediated by a well-defined single-site electrophilic/cationic organo-zirconium catalyst
Polyolefins comprise a major fraction of single-use plastics, yet their catalytic deconstruction/recycling has proven challenging due to their inert saturated hydrocarbon connectivities. Here a very electrophilic, formally cationic earth-abundant single-site organozirconium catalyst chemisorbed on a highly Brønsted acidic sulfated alumina support and characterized by a broad array of experimental and theoretical techniques, is shown to mediate the rapid hydrogenolytic cleavage of molecular and macromolecular saturated hydrocarbons under mild conditions, with catalytic onset as low as 90 °C/0.5 atm H 2 with 0.02 mol% catalyst loading. For polyethylene, quantitative hydrogenolysis to light hydrocarbons proceeds within 48 min with an activity of > 4000 mol(CH 2 units)·mol(Zr) –1 ·h –1 at 200 °C/2 atm H 2 pressure. Under similar solventless conditions, polyethylene-co–1-octene, isotactic polypropylene, and a post-consumer food container cap are rapidly hydrogenolyzed to low molecular mass hydrocarbons. Regarding mechanism, theory and experiment identify a turnover-limiting C-C scission pathway involving ß-alkyl transfer rather than the more common σ-bond metathesis.
Efficient electrically powered CO2-to-ethanol via suppression of deoxygenation
Explore the source record for details and available documents.
The properties of bicyclic and multicyclic hydrocarbons as bio-derived compression ignition fuels that can be prepared via efficient and scalable routes from biomass
A series of multicyclic hydrocarbons were synthesized in high yield and under mild conditions from 2,5-hexanedione, cyclohexanone and cyclopentanone, on a scale of 200 g.
An asymmetrical A-DAD-A-type acceptor simultaneously enhances voltage and current for efficient organic solar cells
Abstract not provided