Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Display system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

High Thermoelectric Performance SnTe–In 2 Te 3 Solid Solutions Enabled by Resonant Levels and Strong Vacancy Phonon Scattering

Herein, we report a significantly improved thermoelectric figure of merit ZT of ~1.1 at ~923 K in p-type SnTe through In 2 Te 3 alloying and iodine doping. We propose that the introduction of indium at Sn sites in SnTe creates resonant levels inside the valence bands, thereby considerably increasing the Seebeck coefficients and power factors in the low-to-middle temperature range. Unlike SnTe–InTe, the SnTe–In 2 Te 3 system displays much lower lattice thermal conductivity. Utilizing a model for point defect scattering, we analyze the origin of the low thermal conductivity in SnTe–In 2 Te 3 and attribute it mainly to the strong vacancy originated phonon scattering between Sn atoms and the vacancies introduced by In 2 Te 3 alloying and partly to the interfacial scattering by In-rich nanoprecipitates present in SnTe matrix. By alloying only In 2 Te 3 with SnTe, a ZT value of ~0.9 at 923 K was achieved. ZT can be further increased to ~1.1 at 923 K through adjusting the charge carriers by iodine doping at Te sites.

36 MATERIALS SCIENCE↗

Studies on the 3-Lamellar Morphology of Miktoarm Terpolymers

The morphologies of ABC miktoarm star terpolymer consisting of polystyrene (PS), polyisoprene (PI), and poly(2-vinylpyridine) (P2VP) were studied by combining small-angle neutron and X-ray scattering (SANS and SAXS) and transmission electron microscopy. Here we find that this system displays a rich morphological behavior including an alternate lamellar (ALT.LAM), cylinder in undulated lamellar (CYLULAM), and 3-lamellar (LAM-3) phase. While the SAXS data alone were insufficient to conclusively differentiate between possible phases, we show that the use of selective deuteration and SANS is essential to unambiguously identify the morphology. In particular, the primary peak in SANS for the miktoarm polymer containing deuterated PS was found to be lower than the next two higher order peaks. Such an unusual scattering pattern for a lamellar morphology was verified by self-consistent field theory calculations when the relative strength of the interaction between PI–P2VP over PS–PI is equal to or greater than 2 (χ IV /χ SI ≥ 2).

36 MATERIALS SCIENCE↗

SPLIT: Stable Protein Coacervation Using a Light Induced Transition

Protein coacervates serve as hubs to concentrate and sequester proteins and nucleotides and thus function as membraneless organelles to manipulate cell physiology. We have engineered a coacervating protein to create tunable, synthetic membraneless organelles that assemble in response to a single pulse of light. Coacervation is driven by the intrinsically disordered RGG domain from the protein LAF-1, and opto-responsiveness is coded by the protein PhoCl, which cleaves in response to 405 nm light. We developed a fusion protein containing a solubilizing maltose-binding protein domain, PhoCl, and two copies of the RGG domain. Several seconds of illumination at 405 nm is sufficient to cleave PhoCl, removing the solubilization domain and enabling RGG-driven coacervation within minutes in cellularsized water-in-oil emulsions. An optimized version of this system displayed light-induced coacervation in Saccharomyces cerevisiae. Finally, the methods described here provide novel strategies for inducing protein phase separation using light.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Photocatalytic Conversion of CO2 to CO using Rhenium Bipyridine Platforms Containing Ancillary Phenyl or BODIPY Moieties

Harnessing of solar energy to drive the reduction of carbon dioxide to fuels requires the development of efficient catalysts that absorb sunlight. In this work, we detail the synthesis, electrochemistry and photophysical properties of a set of homologous fac-ReI(CO)3 complexes containing either an ancillary phenyl (8) or BODIPY (12) substituent. These studies demonstrate that both the electronic properties of the rhenium center and BODIPY chromophore are maintained for these systems. Photolysis studies demonstrate that both assemblies 8 and 12 are competent catalysts for the photochemical reduction of CO2 to CO in DMF using triethanolamine (TEOA) as a sacrificial reductant. Both these systems display TOFs for photocatalytic CO production upon irradiation with light ( ex 400 nm) of ~5 hr 1 with TON values of approximately 20. Although structural and photophysical measurements demonstrate that electronic coupling between the BODIPY and fac-ReI(CO)3 units is limited for complex 12, this work clearly shows that the photoactive BODIPY moiety is tolerated during catalysis and does not interfere with the observed photochemistry. When taken together, these results provide a clear roadmap for the development of advanced rhenium bipyridine complexes bearing ancillary BODIPY groups for the efficient photocatalytic reduction of CO2 using visible light.

Andrade, Gabriel↗

Direct Aerobic Generation of a Ferric Hydroperoxo Intermediate Via a Preorganized Secondary Coordination Sphere

Enzymes exert control over the reactivity of metal centers with precise tuning of the secondary coordination sphere of active sites. One particularly elegant illustration of this principle is in the controlled delivery of proton and electron equivalents in order to activate abundant but kinetically inert oxidants such as O 2 for oxidative chemistry. Chemists have drawn inspiration from biology in designing molecular systems where the secondary coordination sphere can shuttle protons or electrons to substrates. However, a biomimetic activation of O 2 requires the transfer of both protons and electrons, and molecular systems where ancillary ligands are designed to provide both of these equivalents are comparatively rare. Here, we report the use of a dihydrazonopyrrole (DHP) ligand complexed to Fe to perform exactly such a biomimetic activation of O 2 . In the presence of O 2 , this complex directly generates a high spin Fe(III)-hydroperoxo intermediate which features a DHP• ligand radical via ligand-based transfer of an H atom. This system displays oxidative reactivity and ultimately releases hydrogen peroxide, providing insight on how secondary coordination sphere interactions influence the evolution of oxidizing intermediates in Fe-mediated aerobic oxidations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ice rule fragility via topological charge transfer in artificial colloidal ice

Artificial particle ices are model systems of constrained, interacting particles. They have been introduced theoretically to study ice-manifolds emergent from frustration, along with domain wall and grain boundary dynamics, doping, pinning-depinning, controlled transport of topological defects, avalanches, and memory effects. Recently such particle-based ices have been experimentally realized with vortices in nano-patterned superconductors or gravitationally trapped colloids. Here we demonstrate that, although these ices are generally considered equivalent to magnetic spin ices, they can access a novel spectrum of phenomenologies that are inaccessible to the latter. With experiments, theory and simulations we demonstrate that in mixed coordination geometries, entropy-driven negative monopoles spontaneously appear at a density determined by the vertex-mixture ratio. Unlike its spin-based analogue, the colloidal system displays a “fragile ice” manifold, where local energetics oppose the ice rule, which is instead enforced through conservation of the global topological charge. The fragile colloidal ice, stabilized by topology, can be spontaneously broken by topological charge transfer.

36 MATERIALS SCIENCE↗

Monte Carlo study of the pseudogap and superconductivity emerging from quantum magnetic fluctuations

Abstract The origin of the pseudogap behavior, found in many high- T c superconductors, remains one of the greatest puzzles in condensed matter physics. One possible mechanism is fermionic incoherence, which near a quantum critical point allows pair formation but suppresses superconductivity. Employing quantum Monte Carlo simulations of a model of itinerant fermions coupled to ferromagnetic spin fluctuations, represented by a quantum rotor, we report numerical evidence of pseudogap behavior, emerging from pairing fluctuations in a quantum-critical non-Fermi liquid. Specifically, we observe enhanced pairing fluctuations and a partial gap opening in the fermionic spectrum. However, the system remains non-superconducting until reaching a much lower temperature. In the pseudogap regime the system displays a “gap-filling" rather than “gap-closing" behavior, similar to the one observed in cuprate superconductors. Our results present direct evidence of the pseudogap state, driven by superconducting fluctuations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bubbles enable volumetric negative compressibility in metastable elastocapillary systems

Although coveted in applications, few materials expand when subject to compression or contract under decompression, i.e., exhibit negative compressibility. A key step to achieve such counterintuitive behaviour is the destabilisations of (meta)stable equilibria of the constituents. Here, we propose a simple strategy to obtain negative compressibility exploiting capillary forces both to precompress the elastic material and to release such precompression by a threshold phenomenon – the reversible formation of a bubble in a hydrophobic flexible cavity. We demonstrate that the solid part of such metastable elastocapillary systems displays negative compressibility across different scales: hydrophobic microporous materials, proteins, and millimetre-sized laminae. This concept is applicable to fields such as porous materials, biomolecules, sensors and may be easily extended to create unexpected material susceptibilities.

36 MATERIALS SCIENCE↗

Learning local, quenched disorder in plasticity and other crackling noise phenomena

Abstract When far from equilibrium, many-body systems display behavior that strongly depends on the initial conditions. A characteristic such example is the phenomenon of plasticity of crystalline and amorphous materials that strongly depends on the material history. In plasticity modeling, the history is captured by a quenched, local and disordered flow stress distribution. While it is this disorder that causes avalanches that are commonly observed during nanoscale plastic deformation, the functional form and scaling properties have remained elusive. In this paper, a generic formalism is developed for deriving local disorder distributions from field-response (e.g., stress/strain) timeseries in models of crackling noise. We demonstrate the efficiency of the method in the hysteretic random-field Ising model and also, models of elastic interface depinning that have been used to model crystalline and amorphous plasticity. We show that the capacity to resolve the quenched disorder distribution improves with the temporal resolution and number of samples.

36 MATERIALS SCIENCE↗

Understanding the ionic liquid [NC 4111 ][NTf 2 ] from individual building blocks: an IR-spectroscopic study

This study explores the interactions underlying the IR spectra of the ionic liquid [NC 4111 ][NTf 2 ] and its deuterated isotopomer [d 9 -NC 4111 ][NTf 2 ] by first isolating the spectra of charged ionic building blocks using mass-selective CIVP spectroscopy and then following the evolution of these bands upon sequential assembly of the ionic constituents. The spectra of the (1,1) and (2,2) neutral ion pairs are recorded using superfluid helium droplets as well as a solid neon matrix, while those of the larger charged aggregates are again obtained with CIVP. In general, the cluster spectra are similar to that of the bulk, with the (2,2) system displaying the closest resemblance. Analysis of the polarization-dependent band intensities of the neutral ion pairs in liquid droplets as a function of external electric field yields dipole moments of the neutral aggregates. This information allows a coarse assessment of the packing structure of the neutral pairs to be antiparallel at 0.37 K, in contrast to the parallel arrangement found for the assembly of small, high-dipole neutral molecules with large rotational constants (e.g., HCN). The role of an extra anion or cation attached to both the (1,1) and the (2,2) ion pairs to form the charged clusters is discussed in the context of an additional remote, more unfavorable binding site intrinsic to the nature of the charged IL clusters and as such not anticipated in the bulk phase. Whereas for the anion itself only the lowest energy trans conformer was observed, the higher clusters showed an additional population of the cis conformer. Finally, the interactions are found to be consistent with a minimal role of hydrogen bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deciphering supramolecular and polymer-like behavior in metallogels: real-time insights into temperature-modulated gelation and rapid self-assembly dynamics

Bis(pyridyl) urea-based gelators, namely L2 and its isomeric mixture ( L1 + L2 ), are known to self-assemble into 1D architectures capable of inducing supramolecular gelation. Coordination with metal ions such as Ag( I ), Cu( II ), and Fe( III ) introduces structural reinforcement, enabling the formation of distinct 3D networks governed by metal-specific coordination geometries. Here, we present a comprehensive investigation into the temperature-responsive behavior (20–60 °C) of L2 and L1 + L2 , both in the absence and presence of Ag( I ), Dy( III ), Fe( III ), Cu( II ), and Ho( III ), using real-time small-angle neutron scattering (SANS). To probe long-term structural evolution/kinetics of self-assembly, real-time small-angle X-ray scattering (SAXS) was employed on L2 + Ag gels, complemented by differential scanning calorimetry (DSC) to evaluate thermal transitions. Our results reveal strikingly divergent gelation behaviors: L2 forms a highly rigid, covalent polymer-like network, while L1 + L2 exhibits remarkable thermal adaptability. Upon metal coordination, the assemblies exhibit pronounced crystallinity and exceptional thermal stability, as evidenced by persistent Bragg reflections and invariant d-spacings. Intriguingly, L2 : Fe (2 : 1) and L1 : L2 : Fe (0.5 : 0.5 : 1) in acetonitrile-d 3 (ACN-d 3 ) deviate from this trend, forming thermally labile amorphous gels. These systems show a complete loss of crystalline order, reduced Porod exponents—indicative of collapsed or branched fiber morphologies—and prominent melting and glass transition events in DSC. Fitting SANS and SAXS data to the correlation length model unveiled insightful nanostructural features. While most systems displayed minimal temperature-induced variation in mesh size or surface morphology, L2 : Ag in dimethyl sulfoxide-d 6 (DMSO-d 6 )/D 2 O and L2 : Fe (1 : 1) in ACN-d 3 exhibited a rare combination of thermally stable correlation lengths and increasing high- q exponents—strongly suggesting progressive fiber densification or surface smoothing within a robust gel framework. These findings highlight the tunability and structural resilience of supramolecular gels through precise control of ligand architecture, metal coordination, and temperature, offering valuable design principles for functional soft materials.

Pajoubpong, Jinnipha [Univ. of Cincinnati, OH (Uni↗

Calibration of electron cyclotron emission radiometer for KSTAR

We developed and installed an electron cyclotron emission radiometer for taking measurements of Korea Superconducting Tokamak Advanced Research (KSTAR) plasma. In order to precisely measure the absolute value of electron temperatures, a calibration measurement of the whole radiometer system was performed, which confirmed that the radiometer has an acceptably linear output signal for changes in input temperature. It was also found that the output power level predicted by a theoretical calculation agrees with that obtained by the calibration measurement. We also showed that the system displays acceptable noise-temperature performance around 0.23 eV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic order near 270 K in mineral and synthetic Mn{sub 2}FeSbO{sub 6} ilmenite

The structural and magnetic properties of Mn{sub 2}FeSbO{sub 6} single-crystalline mineral and ceramic samples synthesized under thermobaric treatment have been investigated, and compared to theoretical predictions based on first-principles electronic structure calculations. This ilmenite system displays a sharp magnetic transition just below the room temperature related to a ferrimagnetic ordering of the Mn{sup 2+} and Fe{sup 3+} cations, which makes Mn{sub 2}FeSbO{sub 6} a promising candidate for designing functional magnetic materials.

36 MATERIALS SCIENCE↗

Two dimensional growth of ultrathin Fe films on BaTiO{sub 3} with sharp chemical interface

The Fe/BaTiO{sub 3} interface is a prototypical artificial multiferroic system displaying purely electronic magnetoelectric effects at room temperature. As magneto-electric coupling is essentially localized at the interface, the properties of the very first Fe layers in contact with BaTiO{sub 3} play a major role. In this paper, we investigate, by using X-ray photoemission spectroscopy and photoelectron diffraction, the in-situ growth, by molecular beam epitaxy, of ultrathin Fe films (∼7 monolayers) on a BaTiO{sub 3}/SrTiO{sub 3}(001) template. We found that growing the Fe films above room temperature (373 K) is essential in order to avoid island growth and obtain a continuous film. Post-annealing up to 473 K improves the film crystallinity but prevents chemical interdiffusion and roughening. Just an interfacial monolayer of oxidized iron is detected in these conditions, which appears as an unavoidable consequence of the Fe/BaTiO{sub 3} chemical interaction. Its active role in magnetoelectric coupling must be carefully taken into account to correlate theoretical predictions and experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exfoliation of graphene oxide and its application in improving the electro-optical response of ferroelectric liquid crystal

Near complete exfoliation and reduction of lyophilized graphene oxide (GO) has been carried out at temperature as low as 400 °C. The structural characterizations of the reduced GO have been performed using X-ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy techniques. The morphological studies were carried out using scanning electron microscopy. The synthesized GO finds an application in improving the switching performance of a liquid crystal (LC) mixture by remarkably modifying the physical properties, such as spontaneous polarization and rotational viscosity of the ferroelectric LC (FLC) material which in turn resulted into faster response of the FLC. The present study explores the possibility of low temperature thermal reduction of GO along with its application in improving the properties of LC based display systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Communication: Spectroscopic characterization of a strongly interacting C (2) H group on the EMIM + cation in the (EMIM + ) 2 X - (X = BF 4 , Cl, Br, and I) ternary building blocks of ionic liquids

Here, to unravel the intermolecular interactions at play in the assemblies of EMIM-based ionic liquids, we report the vibrational spectra of the cryogenically cooled, cationic ternary complexes with halide ions, (EMIM + ) 2 X - , X = Cl, Br, and I. This series specifically addresses the spectral response of the acidic C (2) H group upon complexation with an atomic anion, which is isolated by selective deuteration at this position. Unlike the behavior of the related BF4- complex, the halide systems display large (~175 cm -1 ) red-shifts and dramatic (~30X) intensity enhancements in the C (2) D stretch (relative to that of the bare d (2) -EMIM + cation), which are largest for the chloride anion. Lastly, electronic structure calculations indicate that, while the spectroscopic signatures of the interaction follow those expected for a traditional hydrogen bond to the C (2) H group, the C–H–X docking arrangement deviates substantially from linearity due to a “double contact” motif involving a weaker interaction to the nearby methyl group [Hunt et al., Chem. Soc. Rev. 44(5), 1257–1288 (2015)].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On entropy determination from magnetic and calorimetric experiments in conventional giant magnetocaloric materials

In this work, we discuss measurement protocols for the determination of the magnetic entropy change associated with first-order magneto-structural transitions from both magnetization and calorimetric experiments. Furthermore, the Cu-doped Ni 2 MnGa Heusler alloy with a first-order magneto-structural phase transition is used as a case study to illustrate how commonly-used magnetization measurement protocols result in spurious entropy evaluations. Two magnetization measurement protocols which allow for the accurate assessment of the magnetic entropy change across first-order magneto-structural transitions are presented. In addition, calorimetric measurements were performed to validate the results from the magnetization measurements. Self-consistent results between themagnetization and calorimetric measurements were obtained when the non-equilibrium thermodynamic state was carefully handled. Such methods could be applicable to other systems displaying giant magnetocaloric effects caused by first-order phase transitions with magnetic and thermal hysteresis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗