SEARCH · Engineering Papers

Results for “Dilute solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Unbiased particle conformation extraction from scattering spectra using orthonormal basis expansions

A strategy is outlined for quantitatively evaluating the particle density profiles from small-angle scattering spectra of dilute solutions. The approach employs an orthonormal basis function expansion method, enabling the determination of characteristic mass distributions in self-assembled structures without the need for a specific structural model. Through computational benchmarking, the efficacy of this approach is validated by effectively reconstructing the density profile of soft-ball systems with varying fuzziness from their scattering signatures. Further, the feasibility of the method is demonstrated by fitting small-angle neutron scattering data obtained from Pluronic L64 micelles at different temperatures. This proposed approach is both simple and analytical, eliminating the requirement for a presumptive structural model in scattering analysis. The new method could therefore facilitate quantitative descriptions of complex nanoscopic structures inherent to numerous soft-matter systems using small-angle scattering techniques.

36 MATERIALS SCIENCE↗

DOE OSTI2022

The Importance of a Moving Boundary Approach for Modeling the SEI Layer Growth to Predict Capacity Fade

One of the contributing factors to the aging of lithium-ion batteries is the growth of the solid-electrolyte interphase (SEI) layer. The growth of the SEI layer leads to the irreversible loss of lithium available for cycling and increases the resistance of the battery. Physics-based models in literature model the kinetically limited or solvent diffusion-limited growth. In such models, the interface resistance is a constant, and the contribution to the overpotential of the intercalation reaction from the SEI layer is considered to be ohmic. In this study, we propose a model that describes the growth of the SEI layer on the electrode surface as a moving interface. The transport of lithium ions and the solvent in the electrolyte are affected by this moving interface. The equations that govern the species transport and the potential drop across the SEI layer are derived from dilute solution theory and solved by transforming the coordinates of the moving boundary. The ion transport induces changes in the conductivity across the SEI layer, which affects the potential drop that arises due to its growth. The effects of this potential on capacity fade are studied over cycling the battery.

25 ENERGY STORAGE↗

DOE OSTI2023

Size and Charge Effects on Crossover of Flow Battery Reactants Evaluated by Quinone Permeabilities Through Nafion

Organic reactants are promising candidates for long-lifetime redox flow batteries, and synthetic chemistry unlocks a wide design space for new molecules. Minimizing crossover of these molecules through ion exchange membranes is one important design consideration, but the ways in which the crossover rate depends on the structure of the crossing species remain unclear. Here, we contribute a systematic evaluation of size- and charge-based effects on dilute-solution small molecule permeability through the Nafion NR212 cation exchange membrane. We found that increasing the magnitude of charge number z with the same sign as membrane fixed charges, achieved here by successive sulfonation of quinone redox cores, results in more than an order of magnitude permeability reduction per sulfonate. Size-based effects, understood by comparing the Stokes radii of the quinones studied, also reduces permeability with increasing effective molecule size, but doubling the effective size of the redox reactants resulted in a permeability decrease of less than a factor of three.

25 ENERGY STORAGE↗

DOE OSTI2024

Simplified Universal Equations for Ionic Conductivity and Transference Number

Nernst-Einstein equation can provide a reasonable estimate of the ionic conductivity of dilute solutions. For concentrated solutions, alternate methods such as Green–Kubo relations and Einstein relations are more suitable to account for ion-ion interactions. Such computations can be expensive for multicomponent systems. Simplified mathematical expressions like the Nernst-Einstein equation do not exist for concentrated multicomponent mixtures. Newman’s treatment of multicomponent concentrated solutions yields a conductivity relation in terms of species concentration and Onsager phenomenological coefficients. However, the estimation of these phenomenological coefficients is not straightforward. Here, mathematical formulations that relate the phenomenological coefficients with the friction coefficients are developed, leading to simplified, ready-to-use expressions of conductivity and transference numbers that can be used for a wide range of ionic mixtures. This approach involves spectral decomposition of the matrix of Onsager phenomenological coefficients. The general analytical expressions for conductivity and transference number are simplified for binary electrolytes, and numerical solutions are provided for ternary and quaternary mixtures with ion dissociation.

Electrochemistry↗

DOE OSTI2020

Rapid and robust antibody Fab fragment crystallization utilizing edge-to-edge beta-sheet packing

Antibody therapeutics are one of the most important classes of drugs. Antibody structures have become an integral part of predicting the behavior of potential therapeutics, either directly or as the basis of modeling. Structures of Fab:antigen complexes have even greater value. While the crystallization and structure determination of Fabs is easy relative to many other protein classes, especially membrane proteins, broad screening and optimization of crystalline hits is still necessary. Through a comprehensive review of rabbit Fab crystal contacts and their incompatibility with human Fabs, we identified a small secondary structural element from the rabbit light chain constant domain potentially responsible for hindering the crystallization of human Fabs. Upon replacing the human kappa constant domain FG loop (HQGLSSP) with the two residue shorter rabbit loop (QGTTS), we dramatically improved the crystallization of human Fabs and Fab:antigen complexes. Our design, which we call “Crystal Kappa”, enables rapid crystallization of human fabs and fab complexes in a broad range of conditions, with less material in smaller screens or from dilute solutions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Rapid Sensing to Facilitate Purification of Rare Earth Element-Containing Process Streams Produced Through Membrane-Assisted Solvent Extraction

The development of an economically competitive domestic supply of rare earth elements and yttrium (REY) is necessary for our nation’s economic growth and national security. The achievement of a secure domestic supply of REY requires not only the development of effective processes for recovery of REY from naturally occurring materials and/or recycled products, but also the development of downstream processes for the ultimate production of high-REY content solids. An impediment to the development of such processes is the scarcity of analytical methods that provide rapid determination of the process stream compositions. In this work, a membrane-based extraction process was used to selectively recover REYs from a dilute solution in the presence of much higher concentrations of Ca and Al. In tandem, the use of a portable spectrometer equipped with an immobilized zinc adeninate benzene tricarboxylate metal-organic framework sensing material makes possible the rapid detection of the presence of ppm concentrations of Tb and Eu in both weakly acidic and strongly acidic process streams within minutes. A solvent extraction processing time of 15-60 min maximized REY selectivity over gangue ions while achieving up to 80% REY and minimal gangue ion recovery. Taken together, these experiments highlight not only an innovative method for REY purification but also the importance of inexpensive, portable characterization methods for near real-time analysis of REY content.

Membrane-assisted solvent extraction↗

DOE OSTI2026

Scalable Fabrication of a Fibrous Amine-functionalized Matrix (FAM) Sorbent for Critical Mineral Recovery

We report a novel flat sheet Fibrous Amine-functionalized Matrix (FAM) sorbent platform designed for efficient and selective capture of CM from dilute solutions. The FAM sorbent features crosslinked amine microfilms coated onto/within a glass fiber matrix, providing fast mass transfer and excellent mechanical stability. Systematic batch and flow-through tests with FAM revealed rapid metal uptake kinetics and high capacity for representative species, achieving ~90 mg/g of Gallium, ~100 mg/g of Cobalt, and ~90 mg/g for Neodymium. Moreover, multiple eluents, including mineral acids and complexing agents, enabled highly effective desorption of adsorbed metals, demonstrating the feasibility of regenerating FAM sorbents. Importantly, tests with authentic coal ash leachate demonstrated strong selectivity toward U.S. Department of Energy (DOE)-listed CM and rare earth elements over abundant base cations, confirming the robustness of FAM in realistic complex solutions. The flat sheet geometry was amenable to scaling into durable spiral wound modules, highlighting the potential for future regeneration and reuse. This work establishes FAM sorbents as a promising platform for the recovery of CM from wastewaters, advancing both resource sustainability and environmental stewardship.

critical mineral recovery↗

DOE OSTI2022

Ion Separations Based on Spontaneously Arising Streaming Potentials in Rotating Isoporous Membranes

Highly selective ion separations are vital for producing pure salts, and membrane-based separations are promising alternatives to conventional ion-separation techniques. Our previous work demonstrated that simple pressure-driven flow through negatively charged isoporous membranes can separate Li+ and K+ with selectivities as high as 70 in dilute solutions. The separation mechanism relies on spontaneously arising streaming potentials that induce electromigration, which opposes advection and separates cations based on differences in their electrophoretic mobilities. Although the separation technique is simple, this work shows that high selectivities are possible only with careful consideration of experimental conditions including transmembrane pressure, solution ionic strength, the K+/Li+ ratio in the feed, and the extent of concentration polarization. Separations conducted with a rotating membrane show Li+/K+ selectivities as high as 150 with a 1000 rpm membrane rotation rate, but the selectivity decreases to 1.3 at 95 rpm. These results demonstrate the benefits and necessity of quantitative control of concentration polarization in highly selective separations. Increases in solution ionic strength or the K+/Li+ feed ratio can also decrease selectivities more than an order of magnitude.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Refinement of Pitting Factor Basis to Evaluate Minimum Nitrite Requirement in Dilute Waste Chemistries

Considering that chloride concentrations are an order of magnitude lower at SRS than the maximum chloride previously tested to evaluate pitting susceptibility of carbon steel, it has been proposed that the Pitting Factor methodology be refined to determine if a reduction in the minimum nitrite requirement is warranted in more dilute solutions and those with chloride concentrations more indicative of waste tank chemistries at SRS. Through the use of cyclic potentiodynamic polarization, the susceptibility of A537 carbon steel to pitting corrosion was evaluated. The Pitting Factor was shown to accurately predict pitting susceptibility throughout the chemistry envelope evaluated. In addition, it was shown that nitrite is not required for inhibition of pitting corrosion in tank conditions with chloride concentrations observed at SRS and up to 4 M nitrate. Based upon these findings, new control limits were proposed that removed the minimum nitrite requirement within the chemistry envelope evaluated up to 50 °C.

36 MATERIALS SCIENCE↗

NASA NTRS1974

Hardness behavior of binary and ternary niobium alloys at 77 and 300 K

The effects of alloy additions of zirconium, hafnium, molybdenum, tungsten, rhenium, ruthenium, osmium, rhodium, and iridium on the hardness of niobium was determined. Both binary and ternary alloys were investigated by means of hardness tests at 77 K and 300 K. Results showed that atomic size misfit plays a dominant role in controlling hardness of binary niobium alloys. Alloy softening, which occurred at dilute solute additions, is most likely due to an extrinsic mechanism involving interaction between solute elements and interstitial impurities.

Stephens, J. R.↗

NASA NTRS1975

Hardness behavior of binary and ternary niobium alloys at 77 and 300 K

An investigation was conducted to determine the effects of alloy additions of zirconium, hafnium, molybdenum, tungsten, rhenium, ruthenium, osmium, rhodium, and iridium on the hardness of niobium. Both binary and ternary alloys were investigated by means of hardness tests at 77 and 300 K. Results showed that atomic size misfit plays a dominant role in controlling the hardness of binary niobium alloys. Alloy softening, which occurred at dilute solute additions, is most likely due to an extrinsic mechanism involving interaction between solute elements and interstitial impurities.

Stephens, J. R.↗

NASA NTRS1976

Labeled Release - An experiment in radiorespirometry

The Labeled Release extraterrestrial life detection experiment onboard the Viking spacecraft is described as it will be implemented on the surface of Mars in 1976. This experiment is designed to detect heterotrophic life by supplying a dilute solution of radioactive organic substrates to a sample of Martian soil and monitoring for evolution of radioactive gas. A significantly attenuated response by a heat-sterilized control sample of the same soil would confirm a positive metabolic response. Experimental assumptions as well as criteria for the selection of organic substrates are presented. The Labeled Release nutrient has been widely tested, is versatile in eliciting terrestrial metabolic responses, and is stable to heat sterilization and to the long-term storage required before its use on Mars. A testing program has been conducted with flight-like instruments to acquire science data relevant to the interpretation of the Mars experiment. Factors involved in the delineation of a positive result are presented and the significance of the possible results discussed.

Levin, G. V.↗

NASA NTRS1980

The possible role of metal ions and clays in prebiotic chemistry

Eight homoionic bentonites were prepared using alkali, alkaline earth, and transition metal ions as counterions. The interaction of the clays with 5'-AMP was studied and it was found that the alkali metal-substituted clays did not remove any nucleotide from dilute solution, and that zinc-bentonite adsorbed the most (98%). In addition, study of the interaction of seven other nucleotides with zinc-bentonite showed that the purine nucleotides were more strongly absorbed than the pyrimidine nucleotides. Langmuir isotherms were obtained for these systems and the adsorption data were explained by the adsorption coefficient and the accessibility of metal for binding.

Lawless, J. G.↗

NASA NTRS1977

Handbook on Hypergolic Propellant Discharges and Disposal

The efficiency of all treatment methods formerly or currently used in treating chemical wastes is assessed with emphasis on the disposal of hypergolic propellants. Maximum focus is on the space shuttle propellants MMH and N2O4. Except for hydrogen peroxide oxidizers, all the propellants are nitrogen based and can be potentially reduced to valuable plant nutrients. In theory, all the propellants can be reduced to carbon, hydrogen, nitrogen, and oxygen, except of fuming nitric acid which contains a small amount of fluorine. Appendices cover: (1) a general design criteria for disposal ponds; (2) thermal aspects of reaction in dilute solution; (3) gas bubble growth, detachment, and rise (4) absorption scrubber fundamentals and descriptions; (5) separation of a propellant vapor from a helium stream by permeation; and (6) atmospheric emission limits.

Bowman, T. E.↗

NASA NTRS1981

Excited ozone is a possible source of atmospheric N2O

Consideration is given to the possibility that internally excited ozone formed in the three-body recombination reaction between oxygen atoms and molecules may be a potential source of atmospheric N2O through a gas-phase reaction with nitrogen molecules. Determinations of the wavelength dependence of the quantum yield for N2O formation from the photolysis of dilute solutions of O3 in liquid N2 and of the O(1D) quantum yield in the gas-phase photolysis of O3 are interpreted as suggesting the possibility of the excited ozone reaction, and a new expression for N2O quantum yield is derived. An expression for the production rate of N2O through the proposed reaction is then obtained and used to calculate atmospheric concentrations and fluxes of N2O. The theoretical profile obtained is found to agree better with experimental data than that obtained without the excited ozone reaction taken into account and to demonstrate a wide variability in N2O mixing ratios. In addition, the existence of the new N2O source is noted to imply a significantly smaller flux of N2O from surface microbiological activities, and provide a possible physical basis for latitudinal and temporal N2O variations and an additional stability for the ozone layer.

Prasad, S. S.↗

NASA NTRS1981

Effect of gravity on coupled convective and interfacial instabilities during directional solidification

Instabilities occurring during the directional constant-rate solidification of a dilute solution of tin in lead are investigated as a function of gravity with particular emphasis on small constant gravitational accelerations. Two types of instabilities have been identified: (1) convective type that corresponds to long wavelengths, and (2) morphological type that corresponds to short wavelengths. These instabilities are coupled but while the convective instabilities depend strongly on gravity, the morphological instabilities are practically independent of gravity. For low velocities, the convective instabilities occur at much lower solute concentrations than the morphological instabilities, whereas at high velocities the reverse is true.

Coriell, S. R.↗

NASA NTRS1982

Statistical mechanics of dilute liquid mixtures of He3 in He4

The Woo-Tan-Massey quantum-mechanical theory of dilute mixtures of He-3 in liquid He-4 is extended to incorporate superfluid flow. Then statistical-mechanical principles are employed to find explicit formulas for thermodyanmic and hydrodynamic properties of mixtures, such as internal energy, free energy, entropy, pressure, chemical potential, and normal-fluid and superfluid densities. This paper is the first in a planned series that applies methods originally developed for pure liquid He-4 to dilute mixtures as a means of establishing a comprehensive theory that includes a theoretical bridge between a microscopic description of the mixtures and a hydrodynamic two-fluid model. Ultimately effects of applied electric and magnetic fields on dilute solutions are also planned to be treated.

Jackson, H. W.↗

NASA NTRS1983

Fluorescence from polystyrene - Photochemical processes in polymeric systems, 7

Results are presented for measurements of the fluorescence spectra of polystyrene in dilute solution and in pure solid films. It is determined that a major potential source of experimental error is the concurrent photooxidative degradation in air which may obscure fluorescence emission from monomeric sites in solid films at 25 C. The fluorescence spectra of oriented films are evaluated in terms of the monomer to excimer fluorescence intensity ratio and the excimer 'red shift'. The monomer to excimer fluorescence intensity ratio is determined to be significantly higher in fluid solution than in solid film.

Gupta, M. C.↗