Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Determining Greenland Ice Sheet Accumulation Rates from Radar Remote Sensing

An important component of NASA's Program for Arctic Regional Climate Assessment (PARCA) is a mass balance investigation of the Greenland Ice Sheet. The mass balance is calculated by taking the difference between the areally Integrated snow accumulation and the net ice discharge of the ice sheet. Uncertainties in this calculation Include the snow accumulation rate, which has traditionally been determined by interpolating data from ice core samples taken from isolated spots across the ice sheet. The sparse data associated with ice cores juxtaposed against the high spatial and temporal resolution provided by remote sensing , has motivated scientists to investigate relationships between accumulation rate and microwave observations as an option for obtaining spatially contiguous estimates. The objective of this PARCA continuation proposal was to complete an estimate of surface accumulation rate on the Greenland Ice Sheet derived from C-band radar backscatter data compiled in the ERS-1 SAR mosaic of data acquired during, September-November, 1992. An empirical equation, based on elevation and latitude, is used to determine the mean annual temperature. We examine the influence of accumulation rate, and mean annual temperature on C-band radar backscatter using a forward model, which incorporates snow metamorphosis and radar backscatter components. Our model is run over a range of accumulation and temperature conditions. Based on the model results, we generate a look-up table, which uniquely maps the measured radar backscatter, and mean annual temperature to accumulation rate. Our results compare favorably with in situ accumulation rate measurements falling within our study area.

Jezek, Kenneth C.↗
NASA NTRS1981

Crew optimized Shuttle/experiment pointing

The extensive participation of the Shuttle crewmembers (Commander, Pilot, Mission Specialist, and Payload Specialist) in Shuttle/experiment pointing is required to accomplish and enhance payload pointing operations and to optimize associated data collection. For payloads requiring extensive pointing operations, the degree of mission success which can be achieved by the involvement of the crew can not be matched by a combination of remote ground operations and automation. The importance of the use of the crew's manipulative skills, scientific judgment, and flexibility in the alteration of preplanned time lines was clearly demonstrated during the Skylab Apollo Telescope Mount solar experiment operations. The payload pointing operations associated with the Spacelab Instrument Pointing System and the Annular Suspension and Pointing System Gimbal System will also extensively use these crew capabilities. Crew operations will also play a potentially important role in the use of advanced pointing systems to accurately point experiments which have an extensive interaction with the surrounding environment, such as laser experiments.

Holt, A. C.↗
NASA NTRSDate not supplied

Analysis of Bioburden Associated with Nonmetallic Spacecraft Materials

Planetary Protection (PP) requirements help to ensure the integrity of life-detection science conducted on solar system bodies, particularly those with liquid water. Such requirements are often met by a combination of cleaning and verification steps to reduce microbial contamination (i.e. bioburden) to an acceptable limit. There are only two cleaning methods approved by the National and Space Administration (NASA), vapor hydrogen peroxide (VHP) and heat microbial reduction (HMR), the latter of which is the most commonly employed. However, HMR can be harsh and produce its own concerns about material integrity, like aging or increasing hardness. When bioburden reduction methods cannot be employed, the project must rely on assumed NASA specification values of bioburden which can cause compliance issues with strict PP bioburden limitations. This work aimed to more accurately define the risk of contamination of a target body by providing empirical data associated with raw materials commonly used in solid rocket motors for lander missions. In this study, we pulverized nonmetallic materials using a cryogenic grinder, then analyzed the resulting substrate for microbial colony forming units (CFU). We found that many nonmetallic materials do not harbor large bioburden when compared with the NASA specification values, though a range existed depending on the material, treatment, and handling. The results from this work provide quantitative data to help reduce concerns of contamination, while also providing a foundation for follow up studies into additional sterilization methods and molecular identification of contaminating microbes.

Planetary Protection↗
NASA NTRS1985

Systematic analysis of EOS data system for operations

A data management analysis methodology is being proposed. The objective of the methodology is to assist mission managers by identifying a series of ordered activities to be systematically followed in order to arrive at an effective ground system design. Existing system engineering tools and concepts have been assembled into a structured framework to facilitate the work of a mission planner. It is intended that this methodology can be gainfully applied (with probable modifications and/or changes) to the EOS payloads and their associated data systems.

Moe, K. L.↗
NASA NTRS1974

GSE, data management system programmers/User' manual

The GSE data management system is a computerized program which provides for a central storage source for key data associated with the mechanical ground support equipment (MGSE). Eight major sort modes can be requested by the user. Attributes that are printed automatically with each sort include the GSE end item number, description, class code, functional code, fluid media, use location, design responsibility, weight, cost, quantity, dimensions, and applicable documents. Multiple subsorts are available for the class code, functional code, fluid media, use location, design responsibility, and applicable document categories. These sorts and how to use them are described. The program and GSE data bank may be easily updated and expanded.

Schlagheck, R. A.↗
NASA NTRS1992

Coronal magnetic structures observing campaign. IV - Multiwaveband observations of sunspot and plage-associated coronal emission

Results of simultaneous observations of an active region located near the central meridian obtained on December 18, 1987, are presented. An asymmetric looplike structure connects the strong leading sunspot with a nearby region of opposite polarity. Both 6- and 20-cm emission lie along this structure, rather than over the sunspot, with higher frequency emission originating closer to the footpoint inside the sunspot. The 20-cm emission is due to a superposition of second- and third-harmonic gyroemission, where the field strength is 160-300 G, while the 6-cm emission is due to third-harmonic gyroemission from a region where the magnetic field strength ranges from 547 to 583 G. X-ray data associated with an area of trailing plage are used to predict the brightness temperature structure due to thermal bremsstrahlung emission in the 6- and 20-cm wavebands.

Brosius, Jeffrey W.↗
NASA NTRS1972

Error analysis of bent ray radio occultation measurments

There are two types of experimental measurement errors of the Doppler data associated with the radio occultation, random and systematic. Random errors are due to thermal noise in the transmission channel, and the phase lock loop, and quantization error in the digital circuitry. These are called noise type errors. The systematic errors are due to geometric uncertainty and equipment phase instability. Considered is the amount of uncertainty, due to random measurement errors, in the refractivity profiles reconstructed by this type of indirect sensing experiment. A class of refractivity profiles is defined which approximately fit the set of measured data. Bounds are placed on the extent of this class of solution profiles. To accomplish this, the sensivity of the reconstructed refractivity profiles to errors in the measured quantity and the statistics of the errors in the measurement are examined.

Saintgermain, R. L.↗
NASA NTRS2024

Urban Air Quality Management at Low-Cost Using Micro Air Sensors: A Case Study From Accra, Ghana

Urban air quality management is dependent on the availability of local air pollution data. In many major urban centers of Africa, there is limited to non-existent information on air quality. This is gradually changing in part due to the increasing use of micro air sensors which have the potential to enable the generation of ground-based air quality data at fine scales for understanding local emission trends. Regional literature on the application of the high-resolution data for emission source identification in this region is limited. In this study a micro air sensor was co-located at the Physics Department, University of Ghana with a reference grade instrument to evaluate its performance for estimating PM2.5 pollution accurately at fine scales and the value of this data in identification of local sources and their behavior over time. For this study 15 weeks of data at hourly resolution with approximately 2500 data pairs are generated and analyzed (June 01, 2023, to September 15, 2023). For this time period a coefficient of determination (r 2 ) of 0.83 was generated with a mean absolute error (MAE) of 5.44 μgm -3 between the pre local calibration micro air sensor (i.e. out of box) and the reference-grade instrument. Following currently accepted best practice methods (see e.g., PAS4023) a domain specific (i.e. local) calibration factor was generated using a multi-linear regression model and when this factor is applied to the micro air sensor data, a reduction i.e., improvement in MAE to 1.43 μgm -3 was found. Daily variation was calculated, a receptor model was applied, and time series plots as a function of wind direction were generated, including PM2.5/PM10 ratio scatter and count plots to explore the utility of this observational approach for local source identification. The 3 data sets were compared (out of box, domain calibrated and reference-grade) and it was found that although there were variations in the data reported, source areas highlighted based on these data were similar, with input from local sources such as traffic emissions and biomass burning. As the temporal resolution of observational data associated with these micro air sensors is higher than for reference grade instruments (primarily due to costs and logistics limitations), they have the potential to provide insight into the complex, often hyper localized sources associated with urban areas, such as those found in major African cities.

Source apportionment↗
NASA NTRS1984

Evaluation of long-duration exposure to the natural space environment on graphite-polyimide and graphite-epoxy mechanical properties (A0175)

The primary objective of this experiment is to accumulate the needed operational data associated with the exposure of graphite-polyimide and graphite-epoxy material to the environments of space. The experiment will be mounted in two 3-in.-deep peripheral trays. Graphite-polyimide specimens will occupy 1 1/3 trays and the graphite-epoxy specimens will occupy two-thirds of a tray. The experiment approach requires two matched sets of specimens with traceable records that are maintained for materials processing and specimen quality. After fabrication, one set of each test specimen will be sectioned and structurally tested to serve as a data baseline. After the flight, the other set of specimens will undergo extensive measurements of mechanical properties for comparison with the original data baseline. Structural testing of the graphite-polyimide specimens will provide strength and elastic data in tension, compression, and shear. Transverse tension microcracking and crack propagation will be evaluated by photomicroscopy. Structural testing of the graphite-epoxy specimens will include verification of laminate, core, adhesive, and fatigue properties as applied to the design and analysis of the payload bay door. Microcracking and crack propagation will also be analyzed by photomicroscopy.

Powell, J. H.↗
NASA NTRS1977

Multispectral analysis of ocean dumped materials

Remotely sensed data were collected in conjunction with sea-truth measurements in three experiments in the New York Bight. Pollution features of primary interest were ocean dumped materials, such as sewage sludge and acid waste. Sewage-sludge and acid-waste plumes, including plumes from sewage sludge dumped by the 'line-dump' and 'spot-dump' methods, were located, identified, and mapped. Previously developed quantitative analysis techniques for determining quantitative distributions of materials in sewage sludge dumps were evaluated, along with multispectral analysis techniques developed to identify ocean dumped materials. Results of these experiments and the associated data analysis investigations are presented and discussed.

Johnson, R. W.↗
NASA NTRS1978

The earth radiation budget satellite system for climate research

The mission implications of providing earth radiation budget data for climate studies have been thoroughly studied. The results of these studies indicate the need for a multisensor, multisatellite system consisting of high and midinclination orbits. To meet this need, NASA and NOAA are planning a joint Earth Radiation Budget Satellite System (ERBSS) composed of instruments on two of NOAA's near-polar Sun-synchronous TIROS-N/NOAA A through G series of operational satellites and on an NASA midinclination satellite of the Applications Explorer Mission (AEM) type referred to as ERBS-A/AEM. This paper describes the scientific objectives of ERBSS, the associated data analysis methods, mission analysis (sampling), and instrument definition.

Woerner, C. V.↗
NASA NTRS2018

UTM UAS Serivce Supplier Development: Sprint 1 Toward Technical Capability Level 4

NASA's UAS Traffic Management (UTM) Project has been tasked with developing concepts and initial implementations for integrating and managing small unmanned aircraft systems (UAS) into the low altitude airspace. To accomplish this task, the Project planned a phased approach based on four Technical Capability Levels (TCLs). As of this writing, TCL4 is currently in development for a late Spring 2019 flight demonstration. This TCL is focused on operations in an urban environment and includes the handling of high density and large-scale off-nominal conditions, vehicle-to-vehicle communications, detect-and-avoid technologies, communication requirements, public safety operations, airspace restrictions, and other related goals. Through research and testing to date, NASA has developed an architecture for UTM that depends on commercial entities collaboratively providing services that are traditionally provided by the Air Navigation Service Provider(ANSP) in manned aviation. A key component of this architecture is the UAS Service Supplier (USS), which acts as a communications bridge between UAS operators and the ANSP when necessary. In addition, the collection of USSs form a USS Network to collaboratively manage the airspace through the sharing of data and the adherence to a standard or set of standards required to participate in this USS Network. This document provides a record of the first step in the development of interoperable USSs that will ultimately support TCL4 flight testing and formalization of the overall UTM concept. To develop these USSs and the underlying specifications for them, NASA has planned a series of "Sprints" to work with industry partners in implementing the features and proposed specifications for USSs to participate in TCL4. This report describes Sprint One. In this Sprint, the focus was on establishing a baseline for the Application Programming Interfaces (APIs) and their associated data models. In addition, the concept of UAS Volume Reservations (UVR) (areas that impose restrictions on sUAS that are allowed to operate) was tested. NASA provided the specifications and iterated on them with partners while implementers developed to those specifications. NASA then tested each partner's implementation to ensure compatibility with all other implementers. This process helped all stakeholders gain confidence that the foundation for future Sprints was solid.

UAS service supplier↗
NASA NTRSDate not supplied

NASA’s Secured Airspace for Urban Air Mobility (UAM)

The Urban Air Mobility (UAM) architecture is leveraged from the Unmanned Traffic Management (UTM) concept of operations. Within the UAM environment, UAM operators work collaboratively to manage aerial vehicles in the urban environment. Providers of Services for UAM (PSU), UAM operators, and Supplemental Data Service Providers (SDSP) provide services to support flight operations within that environment. As a recognized need, various views of UAM flight information are provided to the public and public safety entities. To accomplish this, among other goals, the Federal Aviation Administration (FAA) can coordinate flight information between the FAA controlled National Airspace System (NAS) and the UAM environments through the FAA-Industry Data Exchange Protocol (FIDXP). This concept of UAM proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical take-off and landing (VTOL) or short take-off and landing (STOL) aircraft to overcome increasing surface congestion. To garner the support of UAM and to realize its potential, an assurance of cybersecurity is critical for public acceptance. Understanding the various components communicating with one-another cybersecurity, like in other industries, has come to the forefront highlighting the need to protect these networks and systems from cyberattacks. With the planned growth and reach of UAM systems, it’s clear that the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. Consequently, as these threats evolve, the UAM cybersecurity capabilities must adapt to these changes as well. While learning is always the goal, the overall intent of this workshop is to make recommendations on the following: (1) how future UAM environments can be protected against cyber-attacks, and (2) what mechanisms should be put in place to detect attacks against UAM environments.

UAM↗
NASA NTRS2024

Rhode Island Ecological Conservation: Methods for Monitoring Rhode Island Habitats: Contributing to a Framework for Targeted Conservation and Management

Global avian population decline since the 1970s is largely attributable to habitat loss and degradation from anthropogenic disturbances. NASA DEVELOP’s Rhode Island Ecological Conservation team partnered with the Audubon Society of Rhode Island to compute land use land cover (LULC) maps of Rhode Island to aid in the conservation of the state’s 140 bird species. This project aimed to support the partner’s land acquisition strategies with updated and specific LULC classifications showing potential bird-habitat locations across the state. We incorporated remotely sensed data from Landsat 8 and 9 Operational Land Imager (OLI) into LULC maps using unsupervised classification techniques in ArcGIS Pro and supervised classification in Google Earth Engine. We generated six land classifications for 2023, which showed land cover dominated by upland habitats (forests, scrub/shrub, and grasslands), followed by development. We used TerrSet’s Land Change Modeler to forecast LULC change through 2043, using 2011 and 2021 National Land Cover Database (NLCD) land cover maps derived from Landsat 8 and 9 imagery. Project results suggest that non-urban upland and wetland habitats will decrease over time, while development will continue to encroach on non-urban avian habitats. Our maps and associated data will allow for more efficient land acquisition and management efforts to support avian habitat conservation across Rhode Island. Our study shows that data acquisition and processing from open data sources is feasible and further analysis can be done through GIS classification tools. More analysis is needed beyond this study to obtain more detailed land cover maps, though Audubon can aid its targeted conservation efforts with our current, historic, and forecasted LULC maps.

Remote sensing↗
NASA NTRS2021

Development and Analysis of a Thick Cloud Layers Database for Lightning Launch Commit Criteria Improvement

Lightning can pose a potential threat to space launch vehicles. In response to this, rules were created called the Lightning Launch Commit Criteria (LLCC) that help weather personnel evaluate the potential for natural and rocket-triggered lightning. One of the ten LLCC with the least research is called the Thick Cloud Layers rule. To further understand electrification of thick cloud layers and potentially improve the Thick Cloud Layers rule, a database of thick cloud layers that occurred over the Eastern Range was created. This database is then used to create an algorithm for identifying and differentiating thick cloud layers from other cloud types based on radar characteristics, temperature levels in reference to cloud height, and the surface electric field. By analyzing and identifying thick cloud events, this project could help narrow down when thick clouds are occurring and potentially minimize unnecessary launch delays. Events that caused LLCC violations involving the Thick Cloud Layers rule were analyzed by hand using Level-2 NEXRAD radar data from the National Weather Service WSR-88D radar in Melbourne with the program GR2Analyst. Cases that were found to be isolated and not involved with convection were recorded (date, start/end time, location) in a database. Radar data associated with these cases was collected and gridded using Python radar packages. Once gridded, I calculated and recorded for each radar scan the following radar reflectivity driven parameters within an 11x11 km bin centered on each 1 square km grid point: the mean reflectivity colder than 0 degrees Celsius, Maximum Radar Reflectivity (MRR) colder than 0 degrees Celsius, Volume Averaged Height Integrated Radar Reflectivity (VAHIRR), Hydrometeor Identification (HID), the difference between the maximum and mean reflectivity, the cloud depth colder than 0 degrees Celsius, the overall cloud depth, the cloud top, and the cloud bottom. Soundings for each event were used to determine cloud temperature levels, and where the cloud is in relation to the freezing level. Electric field mill data collected over the Eastern Range was used to determine surface electric fields below each cloud. All parameters were analyzed in depth for several thick cloud cases to gain an understanding of typical thick cloud characteristics. Cases of thick clouds and other isolated cloud types were also recorded for training purposes to see if enough differences exist between cloud types to differentiate them with an algorithm. Each case along with its corresponding characteristics was recorded in a database, and this database was used to compare differing cloud types, as well as train the algorithm to detect thick clouds.

Lightning↗
NASA NTRS2023

Safety Case for Small Uncrewed Aircraft Systems (sUAS) Beyond Visual Line of Sight (BVLOS) Operations at NASA Langley Research Center

This Technical Memorandum (TM) is written to provide for dissemination of the methods and safety considerations for operations of small Uncrewed Aerial Systems (sUAS) Beyond Visual Line-of-Sight (BVLOS)at NASA Langley Research Center. It includes the Safety Case used to acquire a BVLOS Certificate of Authorization (COA) from the FAA and is being published to enable others to benefit from this work. The intended operations, subject to approval from the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA), will include a combination of Within Visual Line of Sight (WVLOS) and Beyond Visual Line of Sight (BVLOS) flights, comprising of at most five sUAS operating concurrently, with no more than three operating BVLOS. Flights will occur in a subset of the Langley Air Force Base (LAFB) Class D airspace (KLFI) at a maximum altitude of 400 ft AGL. Most operations within this subset will take place in the City Environment Range Testing for Autonomous Integrated Navigation (CERTAIN) Range. The CERTAIN Range includes airspace inside the borders of NASA Langley Research Center (LaRC). Additional airspace over the northern section of CERTAIN will be requested as part of the Certificate of Authorization (COA). NASA LaRC BVLOS operations on the CERTAIN Range can be broken down into five critical components needed to meet the 14 CFR § 91.113 see and avoid requirement: 1) procedural deconfliction with LAFB for UAS operations at or below 400 ft and manned aircraft at or above 900’ AGL; 2) ground equipment for detection of intruder aircraft and to support communications between crewmembers ; 3) sUAS vehicles with advanced onboard automation capable of autonomously maintaining safe separation; 4) BVLOS standardized operating procedures (SOPs); 5) and personnel to execute the flight operations in accordance with the SOPs and respond to airborne contingencies. The introduction of new ground equipment includes the use of the Remote Operations for Autonomous Missions (ROAM) UAS Operations Center, development and use of an Integrated Airspace Display (IAD), use of the L-STAR and GA-9120 radars, and the incorporation of standardized Vertiports. The ROAM Operations Center will be the central point for all BVLOS sUAS operations. All command and control (C2), voice communications and airspace awareness displays will reside inside ROAM. The IAD will provide raw data from ADS-B, FLARM, radar tracks and telemetered GPS vehicle positions for interpretation by an Airspace Monitor. The radars will search the class D airspace around the CERTAIN Range and serve as a backup to procedural deconfliction procedures coordinated with LAFB. In the event of a procedural deconfliction breakdown, radar detections of non-participating aircraft will be available so that the 91.113 see and avoid requirement can still be safely met. Finally, the incorporation of Vertiports will have video and network connectivity that enables large numbers of sUAS launches and recoveries from a single location. This is a continuation of the remote command and control of unpiloted aircraft component focused on evaluating unpiloted aircraft flight crew roles and responsibilities, control interfaces and the associated data links needed to operate a fleet of aircraft within a UAM Ecosystem. This work supports the development of future aviation operational concepts based on an Urban Air Mobility Maturity Level (UML) 4 environment (Patterson, 2020). It is assumed that future airspace will include hundreds of simultaneous aircraft operations within the airspace, therefore scalable operations are essential for enabling this future airspace to become a reality. Follow on work includes envisioned flights that expand operations beyond the CERTAIN range and lead to an effective Maritime Surveillance capability.

Matthew W Coldsnow↗
NASA NTRS1994

Offgassing test methodology for composite materials

A significant increase in the use of composite materials has occurred during the past 20 years. Associated with this increased use is the potential for employees to be exposed to offgassing components from composite systems. Various components in composite systems, particularly residual solvents, offgas under various conditions. The potential for offgassing to occur increases as a composite material is heated either during cure or during lay-up operations. Various techniques can be employed to evaluate the offgassing characteristics of a composite system. A joint effort between AIA and SACMA resulted in the drafting of a proposed test method for evaluating the offgassing potential of composite materials. The purpose of testing composite materials for offgassing is to provide the industrial hygienist with information which can be used to assess the safety of the workplace. This paper outlines the proposed test method and presents round robin testing data associated with the test method. Also in this presentation is a discussion of classes of compounds which require specialized sampling techniques.

Scheer, Dale A.↗
NASA NTRSDate not supplied

A Survey of Autonomous Navigation Techniques Applicable to Lunar Surface Exploration

As humanity returns to the Moon, and more and more attention is being paid to lunar surface operations, there is a greater need than ever for methods of surface navigation. These could be methods of computer-assisted orienteering for astronauts exploring on foot during an Extra-Vehicular Activity (EVA), or methods of solving the Lost-on-the-Moon problem to initialize a crewed or autonomous rover’s state estimate. It may also be necessary to process navigation data associated with surface samples or other surface operations a posteriori to better understand where that analysis occurred. Autonomous rover operation will also require Hazard Detection and Avoidance (HDA) and terrain-aware pathfinding. While navigation on the surface of the Moon will likely rely on Earth-based assets such as the Deep Space Network (DSN) or communication with other spacecraft (e.g., LunaNet, LCRNS, pre-deployed moon beacons, a nearby lander) it may be necessary to navigate in a loss-of-communication scenario. This paper analyzes the methods of surface navigation used on other celestial bodies, such as those used during the Apollo missions and autonomous exploration of Mars, as well as novel methods which have been studied but not yet implemented which may prove useful. It is shown that the navigator has myriad options when processing data from an Inertial Measurement Unit (IMU), a star tracker, (rover) wheel encoders, optical cameras, and LIght Detection and Ranging (LIDAR) sensors. The intention of this paper is to provide a broad overview of what has been done and what could be done, to aid those designing vehicles and/or missions to the lunar surface.

Paul D Mckee↗