Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOUBLE BONDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Sooting tendencies of terpenes and hydrogenated terpenes as sustainable transportation biofuels

Terpenes are a diverse group of molecules that are synthesized by plants and microorganisms through combining units of isoprene (2-methyl-1,3-butadiene). They typically contain rings and methyl branches, which gives them high energy densities and low freezing points and makes them appealing candidates for sustainable transportation biofuels. Between the original biosynthesis and upgrading options such as hydrogenation, they have a large degree of freedom of structures, e.g., different carbon skeletons, positions of double bonds, and functional groups. Therefore, structure-property data is needed to downselect potential fuel candidates. Here, we measured the sooting tendencies of 17 C10 monoterpenes and 7 of their hydrogenated analogues. The hydrogenated compounds were custom synthesized, so the quantities were too small for conventional smoke point measurements. Thus, the sooting tendencies were quantified with yield sooting index (YSI), which is based on the soot yield in a fuel-doped non-premixed methane flame. Derived smoke points (DSPs) were estimated from a correlation between YSI and smoke point for other hydrocarbons. The YSI of terpenes and their derivatives varies widely from 85.6 to 248.5. The YSI follows the trend: terpenes > dihydroterpenes > tetrahydroterpenes. The DSPs of all the tetrahydroterpenes and some dihydroterpenes are higher than that of a Jet-A fuel sample, suggesting that they offer soot reduction benefits. Further, the YSIs depend strongly on molecular structure; for example, α-pinene and β-pinene have identical carbon skeletons and differ only in the position of one carbon-carbon double bond, but the YSI of α-pinene is 34% higher than that of β-pinene. Detailed decomposition analysis via density functional theory (DFT) suggests that compared with β-pinene, α-pinene requires fewer steps to form the first aromatic ring and the process is more thermodynamically favorable. The YSI difference between the pinenes is mainly affected by the identity of the products from the dominant decomposition pathways.

09 BIOMASS FUELS↗

Hydrogenation of organic matter as a terminal electron sink sustains high CO 2 :CH 4 production ratios during anaerobic decomposition

Once inorganic electron acceptors are depleted, organic matter in anoxic environments decomposes by hydrolysis, fermentation, and methanogenesis, requiring syntrophic interactions between microorganisms to achieve energetic favorability. In this classic anaerobic food chain, methanogenesis represents the terminal electron accepting (TEA) process, ultimately producing equimolar CO2 and CH4 for each molecule of organic matter degraded. However, CO2:CH4 production in Sphagnum-derived, mineral-poor, cellulosic peat often substantially exceeds this 1:1 ratio, even in the absence of measureable inorganic TEAs. Since the oxidation state of C in both cellulose-derived organic matter and acetate is 0, and CO2 has an oxidation state of +4, if CH4 (oxidation state -4) is not produced in equal ratio, then some other compound(s) must balance CO2 production by receiving 4 electrons. Here we present evidence for ubiquitous hydrogenation of diverse unsaturated compounds that appear to serve as organic TEAs in peat, thereby providing the necessary electron balance to sustain CO2:CH4 >1. While organic electron acceptors have previously been proposed to drive microbial respiration of organic matter through the reversible reduction of quinone moieties, the hydrogenation mechanism that we propose, by contrast, reduces C-C double bonds in organic matter thereby serving as 1) a terminal electron sink, 2) a mechanism for degrading complex unsaturated organic molecules, 3) a potential mechanism to regenerate electron-accepting quinones, and, in some cases, 4) a means to alleviate the toxicity of unsaturated aromatic acids. This mechanism for CO2 generation without concomitant CH4 production has the potential to regulate the global warming potential of peatlands by elevating CO2:CH4 production ratios.

58 GEOSCIENCES↗

Carbocation Stability in H-ZSM5 at High Temperature

Zeolites are common catalysts for multiple industrial applications, including alcohol dehydration to produce olefins, and given their commercial importance, reaction mechanisms in zeolites have long been proposed and studied. Some proposed reaction mechanisms for alcohol dehydration exhibit noncyclic carbocation intermediates or transition states that resemble carbocations, and several previous studies suggest that the tert-butyl cation is the only noncyclic cation more stable than the corresponding chemisorbed species with the hydrocarbon bound to the framework oxygen (i.e., an alkoxide). To determine if carbocations can exist at high temperatures in zeolites, where these catalysts are finding new applications for biomass vapor-phase upgrading (~500 °C), the stability of carbocations and the corresponding alkoxides were calculated with two ONIOM embedding methods (M06-2X/6-311G(d,p):M06-2X/3-21G) and (PBE-D3/6-311G(d,p):PBE-D3/3-21G) and plane-wave density functional theory (DFT) using the PBE functional corrected with entropic and Tkatchenko-Scheffler van der Waals corrections. The embedding methods tested are unreliable at finding minima for primary carbocations, and only secondary or higher carbocations can be described with embedding methods consistent with the periodic DFT results. The relative energy between the carbocations and alkoxides differs significantly between the embedding and the periodic DFT methods. The difference is between ~0.23 and 14.30 kcal/mol depending on the molecule, the model, and the functional chosen for the embedding method. At high temperatures, the pw-DFT calculations predict that the allyl, isopropyl, and sec-butyl cations exhibit negligible populations while acetyl and tertbutyl cations exhibit significant populations (>10%). Moreover, the periodic DFT results indicate that mechanisms including secondary and tertiary carbocations intermediates or carbocations stabilized by adjacent oxygen or double bonds are possible at high temperatures relevant to some industrial uses of zeolite catalysts, although as the minority species in most cases.

36 MATERIALS SCIENCE↗

Lithium-decorated oxidized graphyne for hydrogen storage by first principles study

The geometric stability and hydrogen storage capacity of Li decorated oxidized γ-graphyne are studied based on the first-principles calculations. It is found that oxygen atoms trend to bond with acetylenic carbons and form C=O double bonds on both sides of graphyne. The binding energy of single Li atom on oxidized graphyne is 3.29 eV, owning to the strong interaction between Li atom and O atom. Meanwhile, the dispersion of Li is stable even under a relatively high density. One attached Li atom can at least adsorb six hydrogen molecules around. Benefitting from the porous structure of graphyne and the high attached Li density, a maximum hydrogen storage density 12.03 wt. % is achieved with four Li atoms in graphyne cell. The corresponding average binding energy is 0.24 eV/H{sub 2}, which is suitable for reversible storage. These results indicate that Li decorated graphyne can serve as a promising hydrogen storage material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Activation of carbon dioxide by a terminal uranium–nitrogen bond in the gas-phase: a demonstration of the principle of microscopic reversibility

Activation of CO 2 is demonstrated by its spontaneous dissociative reaction with the gas-phase anion complex NUOCl 2 - , which can be considered as NUO + coordinated by two chloride anion ligands. This reaction was previously predicted by density functional theory to occur exothermically, without barriers above the reactant energy. In this paper, the present results demonstrate the validity of the prediction of microscopic reversibility, and provide a rare case of spontaneous dissociative addition of CO 2 to a gas-phase complex. The activation of CO 2 by NUOCl 2 - proceeds by conversion of a U[triple bond]N bond to a U[double bond]O bond and creation of an isocyanate ligand to yield the complex UO 2 (NCO)Cl 2 - , in which uranyl, UO 2 2+ , is coordinated by one isocyanate and two chloride anion ligands. This activation of CO 2 by a uranium(VI) nitride complex is distinctive from previous reports of oxidative insertion of CO 2 into lower oxidation state U(III) or U(IV) solid complexes, during which both C–O bonds remain intact. This unusual observation of spontaneous addition and activation of CO 2 by NUOCl 2 - is a result of the high oxophilicity of uranium. If the computed Gibbs free energy of the reaction pathway, rather than the energy, is considered, there are barriers above the reactant asymptotes such that the observed reaction should not proceed under thermal conditions. Finally, this result provides a demonstration that energy rather than Gibbs free energy determines reactivity under low-pressure bimolecular conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DETECTION OF PROPENE IN TITAN'S STRATOSPHERE

The Voyager 1 flyby of Titan in 1980 gave a first glimpse of the chemical complexity of Titan's atmosphere, detecting many new molecules with the infrared interferometer spectrometer (IRIS). These included propane (C{sub 3}H{sub 8}) and propyne (CH{sub 3}C{sub 2}H), while the intermediate-sized C{sub 3}H {sub x} hydrocarbon (C{sub 3}H{sub 6}) was curiously absent. Using spectra from the Composite Infrared Spectrometer on Cassini, we show the first positive detection of propene (C{sub 3}H{sub 6}) in Titan's stratosphere (5σ significance), finally filling the three-decade gap in the chemical sequence. We retrieve a vertical abundance profile from 100-250 km, that varies slowly with altitude from 2.0 ± 0.8 ppbv at 125 km, to 4.6 ± 1.5 ppbv at 200 km. The abundance of C{sub 3}H{sub 6} is less than both C{sub 3}H{sub 8} and CH{sub 3}C{sub 2}H, and we remark on an emerging paradigm in Titan's hydrocarbon abundances whereby alkanes > alkynes > alkenes within the C{sub 2}H {sub x} and C{sub 3}H {sub x} chemical families in the lower stratosphere. More generally, there appears to be much greater ubiquity and relative abundance of triple-bonded species than double-bonded, likely due to the greater resistance of triple bonds to photolysis and chemical attack.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-T-771: Two Dimensional Raman Mapping of Carbon Bonds of Radiochromic Films: An Approach to Micro-Dosimetry

Purpose: To study a feasibility of micro-dosimetry with high dose-sensitivity and resolution using two-dimensional Raman mapping on the basis of carbon bonds concentration of radiochromic films Methods: Unlaminated EBT3 films with the purpose of maximal Raman data acquisition were irradiated by 6 MV beam from 5 MU to 1000 MU at the reference condition. Each film was irradiated with shielding material of lead blocking on the half of film as well as the jaw open in half for distinct dose contrast. Raman peaks of 2070 cm-1, 2095 cm-1, and 2115 cm-1 were major subjects to study, which are assumed to be the spectroscopy of carbon triple bonds of monomers, carbon double bonds of polymers, and carbon triple bonds of polymers, respectively. Laser exposure for Raman spectroscopy generated peak’s trend due to polymerization by laser output and this trend was utilized to find out basic peaks related to polymerization process. The relative dose contrast in each one film was detected by Raman spectroscopy with the aid of an auto-scanning stage, comparing the dose contrast between non-irradiated area and irradiated area. Raman spatial resolution was enhanced up to 20 micrometers, assuming the spatial uniformity of radio¬active rod-shaped LiPCDA crystals. An optical scanner with 9600 dpi was used to scan the red-channel intensity to read the dose contrast for 5 MU delivered film. Results: The peak intensity for Raman wavenumber of 2070 cm-1 was used for mapping since it reflected the different peak intensities based on polymerization degree by irradiation. Dose contrast from 1000MU to 5 MU was distinguished by Raman mapping analysis, whereas optical intensity of red-channel didn’t show any difference. Conclusion: In consideration of laser effect, the quantitative analysis based on raw data of Raman mapping could provide more statistically reliable dosimetry than point measurements.

60 APPLIED LIFE SCIENCES↗

Detection of Propene in Titan's Stratosphere

The Voyager 1 flyby of Titan in 1980 gave a first glimpse of the chemical complexity of Titan's atmosphere, detecting many new molecules with the infrared interferometer spectrometer (IRIS). These included propane (C3H8) and propyne (CH3C2H), while the intermediate-sized C3Hx hydrocarbon (C3H6) was curiously absent. Using spectra from the Composite Infrared Spectrometer on Cassini, we show the first positive detection of propene (C3H6) in Titan's stratosphere (5(sigma) significance), finally filling the three-decade gap in the chemical sequence. We retrieve a vertical abundance profile from 100-250 km, that varies slowly with altitude from 2.0 +/- 0.8 ppbv at 125 km, to4.6 +/- 1.5 ppbv at 200 km. The abundance of C3H6 is less than both C3H8 and CH3C2H, and we remark on an emerging paradigm in Titans hydrocarbon abundances whereby alkanes greater than alkynes greater than alkenes within the C2Hx and C3Hx chemical families in the lower stratosphere. More generally, there appears to be much greater ubiquity and relative abundance of triple-bonded species than double-bonded, likely due to the greater resistance of triple bondsto photolysis and chemical attack.

Titan↗

Synthesis of functional polyurethanes and polyesters from biomass-derived monomers

A method of making polyesters and polyurethanes from biomass-derived polyols. The polyol is biomass-derived and has the structure: wherein dashed bonds are single or double bonds and R is selected from the group consisting of —OH and ═O. Polyurethanes are made by reacting the polyol with a diisocyanate. Polyesters are made by reacting the polyol with a dicarboxylic acid.

Chang, Hochan↗

Bond Valences and Anharmonicity in Vacancy-Ordered Double Perovskite Halides

We report that anharmonic lattice dynamics are intimately linked with optical and electronic properties in perovskite halides semiconductors. Vacancy-ordered double perovskites are a subset of the perovskite halide family containing isolated octahedral units. The absence of polyhedral connectivity engenders the vacancy-ordered double perovskites with additional degrees of dynamic freedom, which presents an ideal structural framework to study dynamic-property relationships in perovskite halide semiconductors. In the present study, we examine the structure and bonding origins of anharmonicity in the vacancy-ordered double perovskites Cs 2 Sn 1-x Te x I 6 . While X-ray diffraction indicates that all members adopt the cubic vacancy-ordered double perovskite structure, the local coordination environment probed by X-ray pair distribution function (XPDF) analysis reveals asymmetry of the Cs–I/I–I pair correlation that smoothly decreases with increasing tellurium content. Temperature-dependent neutron total scattering suggests that this asymmetry in the PDF occurs due to anharmonic lattice dynamics arising from octahedral tilting and Cs + displacements, as supported by Reverse Monte Carlo simulations of the Cs 2 SnI 6 and Cs 2 TeI 6 end members. We further correlate the trends in asymmetry and anharmonicity with the bond valence sum of the Cs + ion, and find that the anharmonicity vanishes when the bonding preferences of the Cs + are satisfied by the size of the cuboctahedral void. Lastly, this study presents a simple and effective approach for understanding the origin of anharmonicity in vacancy-ordered double perovskite materials.

36 MATERIALS SCIENCE↗

trans-K3[TcO2(CN)4]

The dioxotetracyanotechnetate anion, [TcO 2 (CN) 4 ] 3- , of the title complex has octahedral symmetry. The technetium is located on a center of inversion and is bound by two oxygen atoms and four cyano ligands. The Tc=O bond distance of 1.7721 (12) Å is consistent with double bond character. The potassium cations [located on special (1/2,0,1) and general positions] reside in octahedral or tetrahedral environments; interionic K···O and K···N interactions occur in the 2.7877 (19)-2.8598 (15) Å range.

36 MATERIALS SCIENCE↗

Density functional theory study of acetaldehyde hydrodeoxygenation on MoO3

Periodic spin-polarized density functional theory calculations were performed to investigate acetaldehyde (CH3CHO) hydrodeoxygenation on the reduced molybdenum trioxide (MoO3) surface. The perfect O-terminated α-MoO3(010) surface is reduced to generate an oxygen defect site in the presence of H2. H2 dissociatively adsorbs at the surface oxygen sites forming two surface hydroxyls, which can recombine into a water molecule weakly bound at the Mo site. A terminal oxygen (Ot) defect site thus forms after water desorption. CH3CHO adsorbs at the O-deficient Mo site via either the sole O-Mo bond or the O-Mo and the C-O double bonds. The possible reaction pathways of the adsorbed CH3CHO with these two configurations were thoroughly examined using the dimer searching method. Our results show that the ideal deoxygenation of CH3CHO leading to ethylene (C2H4) on the reduced MoO3(010) surface is feasible. The adsorbed CH3CHO first dehydrogenate into CH2CHO by reacting with a neighboring terminal Ot. The hydroxyl (OtH) then hydrogenates CH2CHO into CH2CH2O to complete the hydrogen transfer cycle with an activation barrier of 1.39 eV. The direct hydrogen transfer from CH3CHO to CH2CH2O is unlikely due to the high barrier of 2.00 eV. The produced CH2CH2O readily decomposes into C2H4 that directly releases to the gas phase, and regenerates the Ot atom on the Mo site. As a result, the reduced MoO3(010) surface is reoxidized to the perfect MoO3(010) surface after CH3CHO deoxygenation. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Threonine on the Active Site Loop Controls Transition State Formation in Escherichia Coli Respiratory Complex II

In Escherichia coli, the complex II superfamily members succinate:ubiquinone oxidoreductase (SQR) and quinol:fumarate reductase (QFR) participate in aerobic and anaerobic respiration, respectively. Complex II enzymes catalyze succinate and fumarate interconversion at the interface of two domains of the soluble flavoprotein subunit, the FAD binding domain and the capping domain. An 11-amino acid loop in the capping domain (Thr-A234 to Thr-A244 in quinol:fumarate reductase) begins at the interdomain hinge and covers the active site. Amino acids of this loop interact with both the substrate and a proton shuttle, potentially coordinating substrate binding and the proton shuttle protonation state. To assess the loop's role in catalysis, two threonine residues were mutated to alanine: QFR Thr-A244 (act-T; Thr-A254 in SQR), which hydrogen-bonds to the substrate at the active site, and QFR Thr-A234 (hinge-T; Thr-A244 in SQR), which is located at the hinge and hydrogen-bonds the proton shuttle. Both mutations impair catalysis and decrease substrate binding. The crystal structure of the hinge-T mutation reveals a reorientation between the FAD-binding and capping domains that accompanies proton shuttle alteration. Taken together, hydrogen bonding from act-T to substrate may coordinate with interdomain motions to twist the double bond of fumarate and introduce the strain important for attaining the transition state.

08 HYDROGEN↗

Structures and chemical bonding of B{sub 3}O{sub 3}{sup −/0} and B{sub 3}O{sub 3}H{sup −/0}: A combined photoelectron spectroscopy and first-principles theory study

We present a combined photoelectron spectroscopy and first-principles theory study on the structural and electronic properties and chemical bonding of B{sub 3}O{sub 3}{sup −/0} and B{sub 3}O{sub 3}H{sup −/0} clusters. The concerted experimental and theoretical data show that the global-minimum structures of B{sub 3}O{sub 3} and B{sub 3}O{sub 3}H neutrals are very different from those of their anionic counterparts. The B{sub 3}O{sub 3}{sup −} anion is characterized to possess a V-shaped OB–B–BO chain with overall C{sub 2v} symmetry (1A), in which the central B atom interacts with two equivalent boronyl (B≡O) terminals via B–B single bonds as well as with one O atom via a B=O double bond. The B{sub 3}O{sub 3}H{sup −} anion has a C{sub s} (2A) structure, containing an asymmetric OB–B–OBO zig-zag chain and a terminal H atom interacting with the central B atom. In contrast, the C{sub 2v} (1a) global minimum of B{sub 3}O{sub 3} neutral contains a rhombic B{sub 2}O{sub 2} ring with one B atom bonded to a BO terminal and that of neutral B{sub 3}O{sub 3}H (2a) is also of C{sub 2v} symmetry, which is readily constructed from C{sub 2v} (1a) by attaching a H atom to the opposite side of the BO group. The H atom in B{sub 3}O{sub 3}H{sup −/0} (2A and 2a) prefers to interact terminally with a B atom, rather than with O. Chemical bonding analyses reveal a three-center four-electron (3c-4e) π hyperbond in the B{sub 3}O{sub 3}H{sup −} (2A) cluster and a four-center four-electron (4c-4e) π bond (that is, the so-called o-bond) in B{sub 3}O{sub 3} (1a) and B{sub 3}O{sub 3}H (2a) neutral clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

"Densified" tiles form stronger bonds

Application of colloidal silica more than doubles bond strength of ceramic tile/substrate attachments. "Densification" process strengthens surface where tile attaches to felt strain-isolator pad, redistributing stresses and preventing failures at that point. First, isopropyl alcohol is applied to bottom tile surface. Second, aqueous mixture of cementing colloidal silica and reinforcing ball-milled silica particles is painted on tile. Finally, after drying, tile is rewaterproofed by exposure to vapors or methyltrimethoxysilane and acetic acid.

Dotts, R. L.↗

Crystal Structures of CO and NO Adducts of MauG in Complex with Pre-Methylamine Dehydrogenase: Implications for the Mechanism of Dioxygen Activation

MauG is a diheme enzyme responsible for the post-translational formation of the catalytic tryptophan tryptophylquinone (TTQ) cofactor in methylamine dehydrogenase (MADH). MauG can utilize hydrogen peroxide, or molecular oxygen and reducing equivalents, to complete this reaction via a catalytic bis-Fe(IV) intermediate. Crystal structures of diferrous, Fe(II)-CO, and Fe(II)-NO forms of MauG in complex with its preMADH substrate have been determined and compared to one another as well as to the structure of the resting diferric MauG-preMADH complex. CO and NO each bind exclusively to the 5-coordinate high-spin heme with no change in ligation of the 6-coordinate low-spin heme. These structures reveal likely roles for amino acid residues in the distal pocket of the high-spin heme in oxygen binding and activation. Glu113 is implicated in the protonation of heme-bound diatomic oxygen intermediates in promoting cleavage of the O-O bond. Pro107 is shown to change conformation on the binding of each ligand and may play a steric role in oxygen activation by positioning the distal oxygen near Glu113. Gln103 is in a position to provide a hydrogen bond to the Fe(IV){double_bond}O moiety that may account for the unusual stability of this species in MauG.

08 HYDROGEN↗