Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Curious Case of [AnH(NR 2 ) 3 ] (An = Th, U; R = SiMe 3 ): Two Monomeric Actinide Hydrides Revisited

The reaction of AnCl 4 (DME) x (An = Th, x = 2; An = U, x = 0) with 4 equiv of NaNR 2 (R = SiMe 3 ) in THF at 65 °C results in the formation of [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (An = U, 1; An = Th, 2), and not the reported monomeric actinide hydrides, [AnH(NR 2 ) 3 ], as expected. Furthermore, both complexes 1 and 2 were characterized by X-ray crystallography. Surprisingly, their unit cell parameters are remarkably close to those reported for [AnH(NR 2 ) 3 ], suggesting that the original crystals of [AnH(NR 2 ) 3 ] were, in fact, [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ], but were misidentified. Reduction of 1 with 1.1 equiv of KC 8 in THF, in the presence of 1 equiv of 2.2.2-cryptand, results in the formation of [K(2.2.2-cryptand)][U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (3) in good yield. Likewise, the reaction of 1 with 1 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) results in the formation of the BAC adduct, [(BAC)U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (4), in moderate yield. Finally, the addition of H 2 (10 bar) to 2 in C 6 D 6 at room temperature results in the formation of the targeted monomeric hydride, [ThH(NR 2 ) 3 ], in 32% yield, according to integrations against an internal standard. However, removal of the H 2 atmosphere results in rapid reformation of 2. In contrast, the addition of H 2 (10 bar) to 1 in C 6 D 6 at room temperature results in no apparent reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Toward the Practical Use of Cobalt-Free Lithium-Ion Batteries by an Advanced Ether-Based Electrolyte

The criticality of cobalt (Co) has been motivating the quest for Co-free positive electrode materials for building lithium (Li)-ion batteries. However, the Co-free positive electrode materials usually suffer from relatively fast capacity decay when coupled with conventional LiPF 6 -organocarbonates electrolytes. To address this issue, a 1,2-dimethoxyethane (DME) based localized high concentration electrolyte (LHCE) was developed and evaluated in a Co-free Li-ion cell chemistry (Graphite||LiNi 0.96 Mg 0.02 Ti 0.02 O 2 ). Extraordinary capacity retentions were achieved with the LHCE in coin cells (95.3%), single layer pouch cells (79.4%) and high capacity loading double layer pouch cells (70.9 %) after being operated within the voltage range of 2.5-4.4 V for 500 charge/discharge cycles. The capacity retentions of counterpart cells using LiPF6 based conventional electrolyte only reached 61.1%, 57.2% and 59.8%, respectively. Mechanistic studies reveal that the superior electrode/electrolyte interphases formed by the LHCE and the intrinsic chemical stability of the LHCE account for the excellent electrochemical performance in the Co-free Li-ion cells.

25 ENERGY STORAGE↗
DOE OSTI2023

Coordination-Dependent Chemical Reactivity of TFSI Anions at a Mg Metal Interface

Charge transfer across the electrode–electrolyte interface is a highly complex and convoluted process involving diverse solvated species with varying structures and compositions. Despite recent advances in in situ and operando interfacial analysis, molecular specific reactivity of solvated species is inaccessible due to a lack of precise control over the interfacial constituents and/or an unclear understanding of their spectroscopic fingerprints. However, such molecular-specific understanding is critical to the rational design of energy-efficient solid–electrolyte interphase layers. We have employed ion soft landing, a versatile and highly controlled method, to prepare well-defined interfaces assembled with selected ions, either as solvated species or as bare ions, with distinguishing molecular precision. Equipped with precise control over interfacial composition, we employed in situ multimodal spectroscopic characterization to unravel the molecular specific reactivity of Mg solvated species comprising (i.e., bis(trifluoromethanesulfonyl)imide, TFSI – ) anions and solvent molecules (i.e., dimethoxyethane, DME/G1) on a Mg metal surface relevant to multivalent Mg batteries. In situ multimodal spectroscopic characterization revealed higher reactivity of the undercoordinated solvated species [Mg-TFSI-G1] + compared to the fully coordinated [Mg-TFSI-(G1) 2 ] + species or even the bare TFSI – . These results were corroborated by the computed reaction pathways and energy barriers for decomposition of the TFSI – within Mg solvated species relative to bare TFSI – . Finally, we evaluated the TFSI reactivity under electrochemical conditions using Mg(TFSI) 2 –DME-based phase-separated electrolytes representing different solvated constituents. Based on our multimodal study, we report a detailed understanding of TFSI – decomposition processes as part of coordinated solvated species at a Mg-metal anode that will aid the rational design of improved sustainable electrochemical energy technologies.

25 ENERGY STORAGE↗
DOE OSTI2024

Tailoring Solvation Solvent in Localized High-Concentration Electrolytes for Lithium||Sulfurized Polyacrylonitrile

Sulfurized polyacrylonitrile (SPAN) is a promising cathode material for lithium-sulfur (Li-S) batteries due to its significantly reduced polysulfide (PS) dissolution compared to the elemental S cathode. Although conventional carbonate-based electrolytes is stable with SPAN electrodes, it is less stable with Li metal anode (LMA). Recently, localized high-concentration electrolytes (LHCEs) have been developed to improve the stability of LMA. Here, we report a new strategy to further improve the performance of LI||SPAN batteries by replacing the conventional solvating solvent 1,2-dimethoxyethane (DME) in the LHCE with a new solvating solvent, 1,2-diethoxyethane (DEE), the new LHCEs exhibits less reactivity against Li 2 S 2 , alleviates PS dissolution, forms a better cathode-electrolyte interphase layer on the SPAN, and enhances structure reversibility even at elevated temperature (ET, 45°C). With the same salt and diluent as in other LHCEs, the LHCE with DEE leads to better performance in Li||SPAN batteries (with 82.9% capacity retention after 300 cycles at ET), preservation of SPAN cathode structure, and suppression of the volume change of LMA. The similar strategy on tailoring the solvating solvents in LHCEs can also be used in other rechargeable batteries to improve their performances.

1,2-diethoxyethane↗
DOE OSTI2023

Uranium-Mediated Peroxide Activation and a Precursor toward an Elusive Uranium cis -Dioxo Fleeting Intermediate

The activation of chalcogen–chalcogen bonds using organometallic uranium complexes has been well documented for S–S, Se–Se, and Te–Te bonds. In stark contrast, reports concerning the ability of a uranium complex to activate the O–O bond of an organic peroxide are exceedingly rare. Herein, we describe the peroxide O–O bond cleavage of 9,10-diphenylanthracene-9,10-endoperoxide in nonaqueous media, mediated by a uranium(III) precursor [(( Me,Ad ArO) 3 N)U III (dme)] to generate a stable uranium(V) bis-alkoxide complex, namely, [(( Me,Ad ArO) 3 N)U V (DPAP)]. This reaction proceeds via an isolable, alkoxide-bridged diuranium(IV/IV) species, implying that the oxidative addition occurs in two sequential, single-electron oxidations of the metal center, including rebound of a terminal oxygen radical. Furthermore, this uranium(V) bis-alkoxide can then be reduced with KC 8 to form a uranium(IV) complex, which upon exposure to UV light, in solution, releases 9,10-diphenylanthracene to generate a cyclic uranyl trimer through formal two-electron photooxidation. Analysis of the mechanism of this photochemical oxidation via density functional theory (DFT) calculations indicates that the formation of this uranyl trimer occurs through a fleeting uranium cis-dioxo intermediate. At room temperature, this cis-configured dioxo species rapidly isomerizes to a more stable trans configuration through the release of one of the alkoxide ligands from the complex, which then goes on to form the isolated uranyl trimer complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Proton-Catalyzed Interconversion of Tungsten(VI) Imido Isopropylidene and Propylene Complexes

Additions of two equivalents of (CF 3 ) 3 COH (R F9 OH) or (CF 3 ) 2 MeCOH (R F6 OH) to W(NAr) 2 R 2 complexes (Ar = 2,6-diisopropylphenyl, R = n-propyl or i-propyl) offer the opportunity to synthesize propylene or isopropylidene olefin metathesis-active complexes in the absence of free propylene. Propylene and isopropylidene complexes (W(NAr)(ArNH 2 )(OR F9 ) 2 (propylene) and W(NAr)(ArNH 2 )(OR F9 ) 2 (CMe 2 )) are formed at room temperature from both W(NAr) 2 (i-propyl) 2 and W(NAr) 2 (n-propyl) 2 complexes upon addition of two equivalents of R F9 OH; no W = CHCH 2 Me complexes are observed. Similar results are found for W(NAd) 2 (propyl) 2 complexes (Ad = 1-adamantyl). Both RNH 2 and RNH 2 B(C 6 F 5 ) 3 (R = Ar or Ad) catalyze the interconversion of propylene and isopropylidene complexes. Addition of R F6 OH to W(NAr) 2 R 2 or W(NAd) 2 R 2 complexes leads to mixtures that contain largely propylene complexes. Addition of (CF 3 )Me 2 COH (R F3 OH) to W(NAr) 2 (i-Pr) 2 yields only propylene complexes. One propylene complex, W(NAd)(OR F9 ) 2 (CH 2 ═CHMe)(dme), was isolated, structurally characterized, and found to react with AdNH 2 to reform W(NAd)(OR F9 ) 2 (CMe 2 )(AdNH 2 ). Furthermore, it is proposed that propylene and isopropylidene complexes interconvert through the formation of an intermediate isopropyl complex.

Alkyls↗
DOE OSTI2020

Relaxation dynamics in see-saw shaped Dy( iii ) single-molecule magnets

Unusual see-saw shaped Dy( iii ) single-molecule magnets, [K(DME) n ][L Ar Dy(X) 2 ] (L Ar = {C 6 H 4 [(2,6- i PrC 6 H 3 )NC 6 H 4 ] 2 } 2− ), X = Cl ( 1 ) and X = I ( 2 ) were synthesized and display high effective energy barriers ( U eff = 1278–1334 K) in zero field.

Harriman, Katie L. M.↗
DOE OSTI2021

Actinide arene-metalates: ion pairing effects on the electronic structure of unsupported uranium–arenide sandwich complexes

Addition of [UI 2 (THF) 3 (μ-OMe)] 2 ·THF (2·THF) to THF solutions containing 6 equiv. of K[C 14 H 10 ] generates the heteroleptic dimeric complexes [K(18-crown-6)(THF) 2 ] 2 [U(η 6 -C 14 H 10 )(η 4 -C 14 H 10 )(μ-OMe)] 2 ·4THF (1 18C6 ·4THF) and {[K(THF) 3 ][U(η 6 -C 14 H 10 )(η 4 -C 14 H 10 )(μ-OMe)]} 2 (1 THF ) upon crystallization of the products in THF in the presence or absence of 18-crown-6, respectively. Both 1 18C6 ·4THF and 1 THF are thermally stable in the solid-state at room temperature; however, after crystallization, they become insoluble in THF or DME solutions and instead gradually decompose upon standing. X-ray diffraction analysis reveals 1 18C6 ·4THF and 1 THF to be structurally similar, possessing uranium centres sandwiched between bent anthracenide ligands of mixed tetrahapto and hexahapto ligation modes. Yet, the two complexes are distinguished by the close contact potassium-arenide ion pairing that is seen in 1 THF but absent in 1 18C6 ·4THF, which is observed to have a significant effect on the electronic characteristics of the two complexes. Structural analysis, SQUID magnetometry data, XANES spectral characterization, and computational analyses are generally consistent with U(IV) formal assignments for the metal centres in both 1 18C6 ·4THF and 1 THF , though noticeable differences are detected between the two species. For instance, the effective magnetic moment of 1 THF (3.74 μ B ) is significantly lower than that of 1 18C6 ·4THF (4.40 μ B ) at 300 K. Furthermore, the XANES data shows the U L III -edge absorption energy for 1 THF to be 0.9 eV higher than that of 1 18C6 ·4THF, suggestive of more oxidized metal centres in the former. Of note, CASSCF calculations on the model complex {[U(η 6 -C 14 H 10 )(η 4 -C 14 H 10 )(μ-OMe)] 2 } 2– (1*) shows highly polarized uranium–arenide interactions defined by π-type bonds where the metal contributions are primarily comprised by the 6d-orbitals (7.3 ± 0.6%) with minor participation from the 5f-orbitals (1.5 ± 0.5%). These unique complexes provide new insights into actinide–arenide bonding interactions and show the sensitivity of the electronic structures of the uranium atoms to coordination sphere effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis of bulky hydride ligands: m -terphenylborohydride complexes with trivalent uranium and neodymium

Here we describe the first coordination complexes containing a bulky m-terphenyltrihydroborate ligand. Treating [UI 3 (thf) 4 ] and NdCl 3 with three equiv. of Li(H 3 BAr tBu4 )(Et 2 O) (where Ar tBu4 = 2,6-(3,5- t Bu 2 C 6 H 3 ) 2 C 6 H 3 ) yielded [M(H 3 BAr tBu4 ) 3 (thf) 2 ] (M = U and Nd). [U(H 3 BAr tBu4 ) 3 (dme) 2 ] is also described, and structural comparisons reveal the influence of the Lewis base on H 3 BAr tBu4 positioning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparison of Ce( iv )/Th( iv )-alkynyl complexes and observation of a trans -influence ligand series for Ce( iv )

Organometallic cerium(iv) complexes have been challenging to isolate and characterize due to the strongly oxidizing nature of the cerium(iv) cation. Herein, we report two cerium(iv) alkynyl complexes, [Ce(TriNOx)(C[triple bond, length as m-dash]C-SiMe3)] (1-CeTMS) and [Ce(TriNOx)(C[triple bond, length as m-dash]C-Ph)] (1-CePh) (TriNOx3- = tris(2-tert-butylhydroxylaminato)benzylamine), that include terminal alkyne moieties. The isostructural thorium analogue [Th(TriNOx)(C[triple bond, length as m-dash]C-SiMe3)] (1-ThTMS) was also synthesized and compared with 1-CeTMS in bond distance, 13C-NMR spectra, vibrational spectra and electronic structure. The Ce-C bond distances were 2.501(3) Å for 1-CePh and 2.513(5) Å for 1-CeTMS on the shorter end of the few reported CeIV-C single bonds (2.478(3)-2.705(2) Å), possibly indicating significant Ce 5d- and 4f-orbital involvement. 13C-NMR spectroscopy was also consistent with Ce-C covalency, with significantly deshielded resonances ranging from 185-213 ppm. Such 13C-NMR shifts demonstrate a strong influence from spin-orbit coupling (SOC) effects, corroborated by computational studies. Raman analysis showed ν C[triple bond, length as m-dash]C stretching frequencies of 2000 cm-1 (1-CeTMS) and 2052 cm-1 (1-CePh), indicating the cerium(iv)-alkynyl interaction, compared to the parent HC[triple bond, length as m-dash]CPh (IR = 2105 cm-1 and Raman = 2104 cm-1). L3-edge X-ray absorption measurements revealed a predominant Ce(iv) electronic configuration, and magnetic measurements revealed temperature-independent paramagnetism. Electrochemical studies similarly revealed the electron donating ability of the alkynyl ligands, stronger than either fluoride or imido ligands for the Ce(iv)(TriNOx)-framework, with a cerium(iv/iii) reduction potential of E pc = -1.58 to -1.66 V vs. Fc/Fc+. Evidence for a trans-influence has been observed by evaluating a series including previously reported [CeIV(TriNOx)X]+/0 complexes with axial ligands X = THF, I-, Br-, Cl-, F-, -C[triple bond, length as m-dash]C-Ph, -C[triple bond, length as m-dash]C-SiMe3, -NH(3,5-(CF3)2-Ar), -OSiPh3, -N(M(L))(3,5-(CF3)2-Ar) [M(L) = Li(TMEDA), K(DME)2 or Cs(2,2,2-crypt)]. These data stand in contrast with previous reports of an inverse trans-influence at cerium(iv) and point to differences in involvement of cerium 4f- versus 5d-orbitals in the electronic structures of the complexes.

Yang, Qiaomu↗
DOE OSTI2024

Nano Scale Poly(vinylidene chloride-co-acrylonitrile) Protection for Reversible and Stable Mg Anode Interface

This study investigates the efficacy of a polymer coating, PVdC-co-AN, in enhancing the stability and reversibility of the electrochemical Mg anode interface. Coated electrodes, immersed in a 0.25 M Mg(TFSI) 2 −0.50 M MgCl 2 /dimethoxyethane (DME) electrolyte, exhibit notable improvements. Cyclic voltammetry demonstrates consistent behavior with the coated electrode, while the uncoated electrode changes dramatically. During extended open circuit potential conditions, the coated electrode maintains much higher coulombic efficiency (93%) compared to the uncoated electrode (62%). Galvanostatic cycling test over 200 cycles further show the benefits of the PVdC-co-AN coating, decreasing the overpotential of Mg plating and improving long-term stability. The coated electrodes also demonstrate improved rate capability at higher current densities. Surface analysis reveals differences in the formation of byproducts between the coated and uncoated electrodes, indicating a more stable and uniform interface in the former. Nuclear magnetic resonance (NMR) spectroscopy suggests that the polymer influences ion mobility through tuning the solvation environments which results in better kinetics and fewer byproducts. In summary, the study affirms that the PVdC-co-AN coating significantly improves the stability and performance of Mg electrochemistry, offering a promising advancement for practical battery applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Probing f-orbital covalency through the fold angles of transuranium dithiolene complexes

The ability of the actinide elements to covalently bond to ligands is not well understood. A computational effort for compounds of the formula [Cp 2 AnS 2 C 2 H 2 ] -1,0,+1 where An = U, Np, or Pu has shown that the angle between the plane formed by the two sulfurs and the plane formed by the two sulfur atoms and the two carbons converges to 70 – 75° when the ligand is in the dithiolate state (-2 charge on the ligand). Upon oxidation of [Cp 2 NpS 2 C 2 H 2 ] 0 or [Cp 2 PuS 2 C 2 H 2 ] 0 the electron is removed from the dithiolate rather than the actinide and the dihedral angle is reduced to planarity. The reaction of NpCl 4 DME 2 with deprotonated benzene dithiol shows an intense color change suggestive of a charge transfer complex. The binding of the benzene dithiol as the dithiolate to the neptunium metal center is supported by visible, infrared and NMR spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Autoignition Delay Time Measurements of Dimethyl Ether at 110 Bar Inside a Shock Tube

Fuel mixtures of propane and dimethyl ether have been proposed as potential diesel substitutes for use in compression-ignition engines. There is an interest in phasing out diesel fuel because its combustion byproducts are harmful to the environment. Propane and dimethyl ether burn cleaner and produce significantly less carbon dioxide than diesel. The combustion of these fuels at engine-relevant conditions must be characterized to create an engine capable of running on propane and dimethyl ether. In this work, IDT measurements of stoichiometric neat DME diluted in 75% argon were completed for temperatures spanning 800-1200K at 110 bar. A shock tube will be used for all experiments in this work. Experimental IDTs were then compared to simulated values using several well-established mechanisms in the literature.

Guenther, Aaron C. [University of Central Florida]↗
DOE OSTI2021

Anion Coordination Improves High-Temperature Performance and Stability of NaPF 6 -Based Electrolytes for Supercapacitors

Electrolyte stability can be improved by incorporating complexing agents that bind key decomposition intermediates and slow down decomposition. We show that hexamethyl-phosphoramide (HMPA) extends both the thermal stability threshold of sodium hexafluorophosphate (NaPF 6 ) in dimethoxyethane (DME) electrolyte and the cycle life of double-layer capacitors. HMPA forms a stable complex with PF 5 , an intermediate in PF 6 anion thermal degradation. Unbound, this intermediate leads to autocatalytic degradation of the electrolyte solution. The results of electrochemical impedance spectroscopy (EIS) and galvanostatic cycling measurements show large changes in the cell without the presence of HMPA at higher temperatures (≥60 °C). Fourier transform infrared spectroscopy (FTIR) on the liquid and gas phase of the electrolyte shows without HMPA the formation of measurable amounts of PF 5 and HF. The complimentary results of these measurements proved the usefulness of using Lewis bases such as HMPA to inhibit the degradation of the electrolyte solution at elevated temperatures and potentially lead to improve cycle life of a nonaqueous capacitor. The results showed a large increase in capacitance retention during cycling (72% retention after 750,000 cycles). The results also provide evidence of major decomposition processes (0% capacitance retention after 100,000 cycles) that take place at higher temperatures without the additive of a thermal stability additive such as HMPA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Full Spectrum of Characterization for Insight into Carbon Speciation and Removal on a Cu/BEA Catalyst During Renewable High-Octane Hydrocarbon Synthesis

Conversion of methanol and dimethyl ether to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Synthesis of metal complexes and uses thereof

The present disclosure provides novel methods of making aluminum complexes with utility for promoting epoxide carbonylation reactions. Methods include reacting neutral metal carbonyl compounds with alkylaluminum complexes. For example, a compound of formula I: is reacted with a neutral metal carbonyl compound (such as Q′dMe(CO)w′) to produce an aluminum-based carbonylation catalyst:

Lee, Han↗