Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISULFIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Molybdenum Disulfide Catalytic Coatings via Atomic Layer Deposition for Solar Hydrogen Production from Copper Gallium Diselenide Photocathodes

Here, we show that applying atomic layer deposition-derived molybdenum disulfide (MoS 2 ) catalytic coatings on copper gallium diselenide (CGSe) thin film absorbers can lead to efficient wide band gap photocathodes for photoelectrochemical hydrogen production. We have prepared a device that is free of precious metals, employing a CGSe absorber and a cadmium sulfide (CdS) buffer layer, a titanium dioxide (TiO 2 ) interfacial layer, and a MoS 2 catalytic layer. The resulting MoS 2 /TiO 2 /CdS/CGSe photocathode exhibits a photocurrent onset of +0.53 V vs. RHE and a saturation photocurrent density of -10 mA cm -2 , with stable operation for greater than 5 hours in acidic electrolyte. Spectroscopic exploration of this device architecture indicate that overlayer degradation occurs inhomogeneously, ultimately exposing the underlying CGSe absorber.

08 HYDROGEN↗

Structural Evolution of Molybdenum Disulfide Prepared by Atomic Layer Deposition for Realization of Large Scale Films in Microelectronic Applications

Molybdenum disulfide (MoS 2 ) films are attractive materials for electronic and optoelectronic devices, but the temperatures used in the chemical vapor deposition (CVD) of these materials are too high for device integration. Recently, a low-temperature atomic layer deposition (ALD) process was demonstrated for growth of MoS 2 films at 200 °C using MoF 6 and H 2 S. However, the as-deposited films were amorphous and required annealing to obtain the desired layered structure. The MoS 2 films were sulfur-deficient; however, after annealing the crystallinity improved. To study the structure of these films and the process by which they crystallize, we performed in this work X-ray absorption spectroscopy and high-energy X-ray scattering experiments on both as-deposited and annealed MoS 2 films. Analysis indicated that molybdenum atoms in the as-deposited films were well coordinated with sulfur but not well coordinated with other molybdenum atoms when compared to a crystalline reference. Further analysis revealed clusters of the sulfur-rich phase [Mo 3 S(S 6 ) 2 ] 2– , which decomposed after annealing in H 2 and H 2 S at 400 and 600 °C. When compared to the sulfur-deficient films reported previously for this ALD process, the sulfur-rich phase found here indicates that nucleation on the substrate plays an important role in the resulting film stoichiometry, which could be tuned to produce higher quality films for microelectronic applications.

36 MATERIALS SCIENCE↗

Dynamics of Photocatalytic Hydrogen Production in Aqueous Dispersions of Monolayer-Rich Tungsten Disulfide

Two-dimensional tungsten disulfide (WS 2 ) is an emerging semiconducting photocatalyst featuring high optical absorption, carrier mobility, and catalytic activity toward hydrogen evolution. While characterization of its optical and electrocatalytic properties has advanced, less is known about its ultrafast carrier dynamics and intrinsic photocatalytic activity in aqueous systems producing hydrogen. This work removed extraneous variables often found in photoelectrochemical systems, thereby allowing the intrinsic proton reduction rate for monolayer-rich WS2 nanosheets to be estimated via transient absorption lifetimes and a developed kinetic scheme. Addition of a hole scavenger, ascorbic acid (AA), resulted in a 3-fold increase in carrier lifetimes following photoexcitation. Longer electron lifetimes with AA yielded a 14-fold increase in hydrogen production. An intrinsic proton reduction rate constant was extracted that may be extended to any photoelectrochemical or electrochemical hydrogen evolution scheme involving small, monolayer-rich WS 2 catalysts. This represents an important step in better understanding catalytic systems utilizing TMD catalysts.

36 MATERIALS SCIENCE↗

Reactive sputter deposition of pyrite structure transition metal disulfide thin films: Microstructure, transport, and magnetism

Transition metal disulfides crystallizing in the pyrite structure (e.g., TMS{sub 2}, with TM = Fe, Co, Ni, and Cu) are a class of materials that display a remarkably diverse array of functional properties. These properties include highly spin-polarized ferromagnetism (in Co{sub 1-x}Fe{sub x}S{sub 2}), superconductivity (in CuS{sub 2}), an antiferromagnetic Mott insulating ground state (in NiS{sub 2}), and semiconduction with close to optimal parameters for solar absorber applications (in FeS{sub 2}). Exploitation of these properties in heterostructured devices requires the development of reliable and reproducible methods for the deposition of high quality pyrite structure thin films. In this manuscript, we report on the suitability of reactive sputter deposition from metallic targets in an Ar/H{sub 2}S environment as a method to achieve exactly this. Optimization of deposition temperature, Ar/H{sub 2}S pressure ratio, and total working gas pressure, assisted by plasma optical emission spectroscopy, reveals significant windows over which deposition of single-phase, polycrystalline, low roughness pyrite films can be achieved. This is illustrated for the test cases of the ferromagnetic metal CoS{sub 2} and the diamagnetic semiconductor FeS{sub 2}, for which detailed magnetic and transport characterization are provided. The results indicate significant improvements over alternative deposition techniques such as ex situ sulfidation of metal films, opening up exciting possibilities for all-sulfide heterostructured devices. In particular, in the FeS{sub 2} case it is suggested that fine-tuning of the sputtering conditions provides a potential means to manipulate doping levels and conduction mechanisms, critical issues in solar cell applications. Parenthetically, we note that conditions for synthesis of phase-pure monosulfides and thiospinels are also identified.

36 MATERIALS SCIENCE↗

Dissociation pathways of a single dimethyl disulfide on Cu(111): Reaction induced by simultaneous excitation of two vibrational modes

We present a novel reaction mechanism for a single adsorbed molecule that proceeds via simultaneous excitation of two different vibrational modes excited by inelastic tunneling electrons from a scanning tunneling microscope. Specifically, we analyze the dissociation of a single dimethyl disulfide (DMDS, (CH{sub 3}S){sub 2}) molecule on Cu(111) by using a versatile theoretical method, which permits us to simulate reaction rates as a function of sample bias voltage. The reaction is induced by the excitation of C-H stretch and S-S stretch modes by a two-electron process at low positive bias voltages. However, at increased voltages, the dissociation becomes a single-electron process that excites a combination mode of these stretches, where excitation of the C-H stretch is the energy source and excitation of the S-S stretch mode enhances the anharmonic coupling rate. A much smaller dissociation yield (few orders of magnitude) at negative bias voltages is understood in terms of the projected density of states of a single DMDS on Cu(111), which reflects resonant excitation through the molecular orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of density of states, conduction mechanisms and dielectric properties of nickel disulfide nanoparticles

Temperature and frequency dependent ac electrical measurements were used to explore density of states, conduction mechanisms and dielectric properties of nickel disulfide (NiS{sub 2}) nanoparticles. The NiS{sub 2} nanoparticles were prepared by conventional one step solid state reaction method at 250 °C. X-ray diffraction (XRD) confirmed cubic phase of prepared nanoparticles. Scanning electron microscope (SEM) images revealed presence of irregular shaped nanoparticles as small as 50 nm. The ac electrical measurements were carried out from 300 K to 413 K. Two depressed semicircular arcs from 20 Hz to 2 MHz showed presence of bulk and grain boundary phases in NiS{sub 2} nanoparticles at all temperatures. Small polaron hopping conduction from 300 K to 393 K and correlated barrier hopping conduction mechanism at temperatures higher than 393 K was observed. High value of density of states (of the order of 10{sup 24} eV{sup −1}cm{sup −3}) was calculated from ac conductivity. At low frequencies high values (of the order of 10{sup 4}-10{sup 7}) of real part of dielectric constant (ε′) were observed at different temperatures. These observations suggest that NiS{sub 2} nanoparticles may find applications in electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High Pressure X-ray Diffraction Study of Titanium Disulfide

A high pressure angle dispersive synchrotron x-ray diffraction study of titanium disulfide (TiS2) was carried out to pressures of 45.5 GPa in a diamond-anvil cell. We observed a phase transformation of TiS2 beginning at about 20.7 GPa. The structure of the high pressure phase needs further identification. By fitting the pressure-volume data to the third-order Birch-Murnaghan equation of state, the bulk modulus, K0T, was determined to be 45.9 {+-} 0.7 GPa with its pressure derivative, K'0T, being 9.5 {+-} 0.3 at pressures lower than 17.8 GPa. It was found that the compression behavior of TiS2 is anisotropic along the different axes. The compression ratio of the c-axis is about nine times larger than the a-axis when pressures are lower than 1 GPa. It suddenly decreases to three times larger at pressures of about 3 GPa. This ratio shows a linear decrease with a slope of negative 0.048 at pressures below phase transformation.

43 PARTICLE ACCELERATORS↗

Aging studies on chemical vapor deposition and mechanically exfoliated molybdenum disulfide flakes heated in ambient air

The structural integrity of atomically thin two-dimensional molybdenum disulfide (MoS 2 ) is crucial for high-temperature applications, including nanoelectronics and optoelectronics. This study explores the structural stability and electrical performance, under extended thermal exposure in air, of MoS 2 flakes synthesized via chemical vapor deposition (CVD) and mechanical exfoliation. The MoS 2 flakes, both CVD-grown and mechanically exfoliated, were subjected to heating at 200 °C with a relative humidity of 60(±5)% for a prolonged period and investigated with atomic force microscopy and Raman spectroscopy. This study shows that CVD-grown flakes developed noticeable cracks after prolonged heating, whereas mechanically exfoliated flakes mostly retained their structural integrity. Also, both types of flakes showed a decrease in layer thickness and lateral size over time, with mechanically exfoliated flakes exhibiting a comparatively smaller reduction in substrate coverage area. In addition, MoS 2 -based two-terminal devices were subjected to heating at 150 °C for approximately 1100 h, and their electrical characterization revealed a steady rise in current during constant voltage (5 V) conditions. This study enhances our understanding of MoS 2 stability and provides guidance for improving the reliability of MoS 2 -based devices in high-temperature electronic applications.

2D materials↗

Insulator-metal transition of highly compressed carbon disulfide

We present integrated spectral, structural, resistance, and theoretical evidences for simple molecular CS{sub 2} transformations to an insulating black polymer with threefold carbon atoms at 9 GPa, then to a semiconducting polymer above 30 GPa, and finally to a metallic solid above 50 GPa. The metallic phase is a highly disordered three-dimensional network structure with fourfold carbon atoms at the carbon-sulfur distance of {approx}1.70 {angstrom}. Based on first-principles calculations, we present two plausible structures for the metallic phase: {alpha}-chalcopyrite and tridymite, both of which exhibit metallic ground states and disordered diffraction features similar to that measured. We also present the phase and chemical transformation diagram for carbon disulfide, showing a large stability field of the metallic phase to 100 GPa and 800 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical and Magnetic Properties of Hafnium Disulfide Intercalated with Iron Atoms

Simultaneous study of the dependences of the structural parameters, electrical, and magnetic properties of hafnium disulfide intercalated iron atoms in the dependence on the intercalate concentration and temperature has been performed for the first time. The temperature dependences of the electrical resistance are shown to exhibit the activation character with the activation energies characteristic of impurity conduction. The effective magnetic moments of iron ions in Fe{sub x}HfS{sub 2} is found to be significantly lesser than the values of free iron ions and to decrease as the iron content increases. The character of the temperature dependences of the effective magnetic moments and negative values of the paramagnetic Curie temperatures indicate possible interactions of the antiferromagnetic type between intercalated atoms. However, the dependences of the magnetization on field for Fe{sub 0.33}HfS{sub 2} and Fe{sub 0.5}HfS{sub 2} obtained at T = 2 K demonstrate the hysteresis phenomenon characteristic of the ferromagnetic state. The results are discussed assuming the existence of hybridization 3d electron states of intercalated iron atoms with the electronic states of HfS{sub 2} matrices and the competition of various exchange interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cysteine Specific Targeting of the Functionally Distinct Peroxiredoxin and Glutaredoxin Proteins by the Investigational Disulfide BNP7787

Glutaredoxin (Grx), peroxiredoxin (Prx), and thioredoxin (Trx) are redoxin family proteins that catalyze different types of chemical reactions that impact cell growth and survival through functionally distinct intracellular pathways. Much research is focused on understanding the roles of these redoxin proteins in the development and/or progression of human diseases. Grx and Prx are overexpressed in human cancers, including human lung cancers. BNP7787 is a novel investigational agent that has been evaluated in previous clinical studies, including non-small cell lung cancer (NSCLC) studies. Herein, data from activity assays, mass spectrometry analyses, and X-ray crystallographic studies indicate that BNP7787 forms mixed disulfides with select cysteine residues on Grx and Prx and modulates their function. Studies of interactions between BNP7787 and Trx have been conducted and reported separately. Despite the fact that Trx, Grx, and Prx are functionally distinct proteins that impact oxidative stress, cell proliferation and disease processes through different intracellular pathways, BNP7787 can modify each protein and appears to modulate function through mechanisms that are unique to each target protein. Tumor cells are often genomically heterogeneous containing subpopulations of cancer cells that often express different tumor-promoting proteins or that have multiple dysregulated signaling pathways modulating cell proliferation and drug resistance. A multi-targeted agent that simultaneously modulates activity of proteins important in mediating cell proliferation by functionally distinct intracellular pathways could have many potentially useful therapeutic applications.

BNP7787↗

Correlation of Fabrication Methods and Enhanced Wear Performance in Nanoporous Anodic Aluminum Oxide with Incorporated Molybdenum Disulfide (MoS 2 ) Nanomaterials

Wear performance is integral to component longevity, minimizing industrial waste and excess energy costs in a wide variety of applications. Anodized aluminum oxide (AAO) has many beneficial properties leading to its wide use across industries as a surface treatment for many aluminum components, but the wear properties of the coating could be improved significantly. Here, we used an electrochemical method to incorporate molybdenum disulfide (MoS 2 ), a nanomaterial used as a dry lubricant, to modify alloys of aluminum during AAO preparation. Using Raman spectroscopy and tribological scratch measurements, we thoroughly characterized the structure and wear behavior of the films. The MoS 2 deposition procedure was optimal on aluminum 5052 anodized in higher acid concentrations, with friction coefficients at around 0.05 (~10× better than unmodified AAO). Changing anodization conditions to produce harder films with smaller pores led to worsened wear properties, likely because of lower MoS 2 content. Studying a commercial MoS 2 /AAO film of a different Al alloy (7075) showed that a heat treatment step intended to fully convert all deposited MoS x species to MoS 2 can adversely affect wear in some alloys. While Al 6061 and 1100 produced films with worse wear performance compared to Al 5052 or 7075, our results show evidence that acid cleaning after initial anodization likely removes residual alloying elements, affecting MoS 2 incorporation. This study demonstrates a nanomaterial modified AAO film with superior wear characteristics to unmodified AAO and relates fabrication procedure, film structure, and practical performance.

36 MATERIALS SCIENCE↗

Concurrent Synthesis of High-Performance Monolayer Transition Metal Disulfides

To date, the chemical vapor deposition (CVD) approach has been widely used for the growth of transition metal dichalcogenides (TMDs). However, the reported CVD methods to synthesize TMDs cannot be used to grow more than one type of TMDs. This work reports a promising CVD technique to concurrently synthesize multiple monolayer transition metal disulfides once. The optoelectrical characterization and high-resolution transmission electron microscopy show the high quality of monolayer crystals, and, more importantly, there is no mixing between different precursors during the growth process, which has been investigated by considering the gas flow dynamics and concentration distribution of precursors in our setup. This strategy indicates the promising future for the batch production of 2D materials and the concurrent synthesis techniques in standard state-of-the-art complementary metal-oxide-semiconductor (CMOS) fabrication technology.

36 MATERIALS SCIENCE↗

Nanoscale Editing of Multi and Single Layer Tungsten Disulfide via Gas‐Assisted Focused Electron Beam Induced Etching for Device Prototyping

Focused electron beam induced etching (FEBIE) with XeF 2 (xenon difluoride) precursor is conducted on multi-layer exfoliated WS 2 (tungsten disulfide) and monolayer WS 2 grown by chemical vapor deposition (CVD). The films are characterized by atomic force microscopy (AFM) and Raman and photoluminescence (PL) spectroscopy post-etching. The etch rates/efficiencies are reported as a function of electron beam energy, current, dwell time, and XeF 2 pressure. Bulk film Raman spectra are unchanged post-FEBIE, indicating minimal subsurface damage. Monolayer WS 2 shows a decrease in Raman and PL intensity post-FEBIE, with a dose-to-clear of ≈2 nC µm −2 . The study reveals regimes affected by the various mass transport contributions such as refresh time and the ratio of electrons/XeF 2 . Spontaneous etching was discovered during FEBIE of large patterned areas due to the long frame/refresh times. Density functional theory and ab initio molecular dynamics simulations compares desorption of SF x and WF x molecules from pristine WS 2 basal planes and pore edges, revealing the spontaneous etching is consistent with etching of partially etched monolayers during each frame. Single-line etching width of 21 nm, and patterning flakes into 100 nm wide channels are demonstrated. In conclusion, this work demonstrates the possibility of editing WS 2 flakes into electronic devices of arbitrary dimensions for semiconductor applications.

2D materials↗

Graphene‐Assisted Antioxidation of Tungsten Disulfide Monolayers: Substrate and Electric‐Field Effect

Transition metal dichalcogenides (TMDs) have emerged as promising materials to complement graphene for advanced optoelectronics. However, irreversible degradation of chemical vapor deposition‐grown monolayer TMDs via oxidation under ambient conditions limits applications of TMD‐based devices. Here, the growth of oxidation‐resistant tungsten disulfide (WS 2 ) monolayers on graphene is demonstrated, and the mechanism of oxidation of WS 2 on SiO 2 , graphene/SiO 2 , and on graphene suspended in air is elucidated. While WS 2 on a SiO 2 substrate begins oxidation within weeks, epitaxially grown WS 2 on suspended graphene does not show any sign of oxidation, attributed to the screening effect of surface electric field caused by the substrate. The control of a local oxidation of WS 2 on a SiO 2 substrate by a local electric field created using an atomic force microscope tip is also demonstrated.

Kang, Kyungnam↗

Titanium Disulfide Coated Carbon Nanotube Hybrid Electrodes Enable High Energy Density Symmetric Pseudocapacitors

While electrochemical supercapacitors often show high power density and long operation lifetimes, they are plagued by limited energy density. Pseudocapacitive materials, in contrast, operate by fast surface redox reactions and are shown to enhance energy storage of supercapacitors. Furthermore, several reported systems exhibit high capacitance but restricted electrochemical voltage windows, usually no more than 1 V in aqueous electrolytes. Here, it is demonstrated that vertically aligned carbon nanotubes (VACNTs) with uniformly coated, pseudocapacitive titanium disulfide (TiS 2 ) composite electrodes can extend the stable working range to over 3 V to achieve a high capacitance of 195 F g -1 in an Li-rich electrolyte. A symmetric cell demonstrates an energy density of 60.9 Wh kg -1 —the highest among symmetric pseudocapacitors using metal oxides, conducting polymers, 2D transition metal carbides (MXene), and other transition metal dichalcogenides. Nanostructures prepared by an atomic layer deposition/sulfurization process facilitate ion transportation and surface reactions to result in a high power density of 1250 W kg -1 with stable operation over 10 000 cycles. In conclusion, a flexible solid-state supercapacitor prepared by transferring the TiS 2 –VACNT composite film onto Kapton tape is demonstrated to power a 2.2 V light emitting diode (LED) for 1 min.

36 MATERIALS SCIENCE↗

Monolayer Vanadium‐Doped Tungsten Disulfide: A Room‐Temperature Dilute Magnetic Semiconductor

Abstract Dilute magnetic semiconductors (DMS), achieved through substitutional doping of spin‐polarized transition metals into semiconducting systems, enable experimental modulation of spin dynamics in ways that hold great promise for novel magneto–electric or magneto–optical devices, especially for two‐dimensional (2D) systems such as transition metal dichalcogenides that accentuate interactions and activate valley degrees of freedom. Practical applications of 2D magnetism will likely require room‐temperature operation, air stability, and (for magnetic semiconductors) the ability to achieve optimal doping levels without dopant aggregation. Here, room‐temperature ferromagnetic order obtained in semiconducting vanadium‐doped tungsten disulfide monolayers produced by a reliable single‐step film sulfidation method across an exceptionally wide range of vanadium concentrations, up to 12 at% with minimal dopant aggregation, is described. These monolayers develop p‐type transport as a function of vanadium incorporation and rapidly reach ambipolarity. Ferromagnetism peaks at an intermediate vanadium concentration of ~2 at% and decreases for higher concentrations, which is consistent with quenching due to orbital hybridization at closer vanadium–vanadium spacings, as supported by transmission electron microscopy, magnetometry, and first‐principles calculations. Room‐temperature 2D‐DMS provide a new component to expand the functional scope of van der Waals heterostructures and bring semiconducting magnetic 2D heterostructures into the realm of practical application.

36 MATERIALS SCIENCE↗

Intercalation Pseudocapacitance of Exfoliated Molybdenum Disulfide for Ultrafast Energy Storage

In this study, we report intercalation pseudocapacitance of 250 F g -1 for exfoliated molybdenum disulfide (MoS 2 ) in non-aqueous electrolytes that contain lithium ions. The exfoliated MoS 2 shows surface-limited reaction kinetics with high rate capability up to 3 min of charge or discharge. The intercalation pseudocapacitance originates from the extremely fast kinetics due to the enhanced ionic and electronic transport enabled by the slightly expanded layer structure as well as the metallic 1T-phase. The exfoliated MoS 2 could be also used in a Li-Mg-ion hybrid capacitor, which shows full cell specific capacitance of 240 F g -1 .

25 ENERGY STORAGE↗