Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Crystallinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Evolution of silicate coordination in architected amorphous and crystalline magnesium silicates during carbon mineralization

Advancing durable solutions for carbon storage and removal at the gigaton scale to produce solid carbonates via carbon mineralization requires harnessing earth abundant magnesium silicate resources. Calibrated insights linking the structural and morphological features of earth abundant amorphous and crystalline magnesium silicate phases to their reactivity are essential for scalable deployment but remain underdeveloped. To resolve the influence of silica coordination and mass transfer on carbon mineralization behavior, magnesium silicates bearing amorphous and crystalline phases (AC Mg-silicate) are synthesized. The structural and morphological transitions starting from colloidal precursors to their final synthesized form on heating are delineated using operando ultra small/small/wide angle X-ray scattering (USAXS/SAXS/WAXS) measurements. The evolution of the silicate phases on carbon mineralization of AC Mg-silicate is contrasted with that of highly crystalline Mg-silicate (HC Mg-silicate) when reacted at 200 °C and a CO 2 partial pressure of 20 atm in water and 1 M NaHCO 3 solution in stirred and unstirred environments. These experimental conditions are analogous to those of the water–gas-shift reaction for sustainable recovery of H 2 with inherent carbon mineralization. Enhancement in the extent of carbon mineralization by 13.3–19.5% noted in the presence of NaHCO 3 compared to water in AC and HC Mg-silicate with and without stirring, is attributed to the buffering effect which aids simultaneous silicate dissolution and carbon mineralization. Enhanced extents of carbon mineralization in the presence of NaHCO 3 correspond to the formation of MgSiO 3 and SiO 2 phases from the starting Mg 2 SiO 4 precursors in AC and HC Mg-silicate. Unlocking these silicate transformations during carbon mineralization by harnessing architected Mg-silicate precursors reveals the feasibility of integrating these chemical pathways with sustainable H 2 conversion pathways with inherent carbon mineralization.

Gao, Xun [Cornell Univ., Ithaca, NY (United States↗
DOE OSTI2025

Elucidating the reversible exsolution–dissolution behaviour of high-entropy oxides in crystalline and amorphous phases

High-entropy oxides (HEOs), as a subclass of high-entropy materials (HEMs), offer a versatile platform for catalysis by leveraging entropy-stabilized solid solutions with tunable compositions, lattice structures, and electronic properties. While exsolution–dissolution of metal species in crystalline HEOs has emerged as a promising strategy for reversible active sites regeneration, the dynamic behaviour of HEOs possessing amorphous nature remains under-explored, particularly the difference with crystalline counterparts. In this work, we systematically investigate the architecture-dependent exsolution–dissolution behavior of HEOs by comparing a crystalline-phase HEO (c-HEO) and an amorphous-phase HEO (a-HEO), both comprising Ni, Mg, Cu, Zn, and Co as principal metal elements. Using a combination of in situ variable-temperature X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), electron microscopy, and in situ CO diffuse reflectance infrared Fourier transform spectroscopy (CO-DRIFTS), the structural evolution of the two HEO phases under redox conditions was elucidated. Both materials exhibit reversible exsolution of metallic species or alloys in reducing environments, followed by re-incorporation into the host lattice upon oxidation. Remarkably, the a-HEO demonstrates more facile and dynamic self-healing behavior, with alloy exsolution and dissolution occurring under milder conditions because of its enhanced reducibility and structural disorder. This study provides critical insights into the design of next-generation regenerable catalysts based on amorphous HEOs, highlighting the role of phase structure in governing reversible metal-site formation dynamics and catalytic performance.

Wang, Qingju [Univ. of Tennessee, Knoxville, TN (U↗
DOE OSTI2021

Compositional and phase dependence of elastic modulus of crystalline and amorphous Hf 1- x Zr x O 2 thin films

The elastic moduli of amorphous and crystalline atomic layer-deposited Hf 1-x Zr x O 2 (HZO, x = 0, 0.31, 0.46, 0.79, 1) films prepared with TaN electrodes on silicon substrates were investigated using picosecond acoustic measurements. The moduli of the amorphous films were observed to increase between 211 ± 6 GPa for pure HfO 2 and 302 ± 9 GPa for pure ZrO 2 . In the crystalline films, it was found that the moduli increased upon increasing the zirconium composition from 248 ± 6 GPa for monoclinic HfO 2 to 267 ± 9 GPa for tetragonal ZrO 2 . Positive deviations from this increase were observed for the Hf 0.69 Zr 0.31 O 2 and Hf 0.54 Zr 0.46 O 2 compositions, which were measured to have moduli of 264 ± 8 GPa and 274 ± 8 GPa, respectively. These two compositions contained the largest fractions of the ferroelectric orthorhombic phase, as assessed from polarization and diffraction data. The biaxial stress states of the crystalline films were characterized through sin 2 (ψ) x-ray diffraction analysis. The in-plane stresses were all found to be tensile and observed to increase with the increasing zirconium composition, between 2.54 ± 0.6 GPa for pure HfO 2 and 5.22 ± 0.5 GPa for pure ZrO 2 . The stresses are consistent with large thermal expansion mismatches between the HZO films and silicon substrates. Furthermore, these results demonstrate a device-scale means to quantify biaxial stress for investigation on its effect on the ferroelectric properties of hafnia-based materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The anisotropic nature of singlet fission in single crystalline organic semiconductors

The escalating global energy predicament implores for a revolutionary resolution—one that converts sunlight into electricity—holding the key to supreme conversion efficiency. This comprehensive review embarks on the exploration of the principle of generating multiple excitons per absorbed photon, a captivating concept that possesses the potential to redefine the fundamental confines of conversion efficiency, albeit its application remains limited in photovoltaic devices. At the nucleus of this phenomenon are two principal processes: multiple exciton generation (MEG) within quantum-confined environments, and singlet fission (SF) inside molecular crystals. The process of SF, characterized by the cleavage of a single photogenerated singlet exciton into two triplet excitons, holds promise to potentially amplify photon-to-electron conversion efficiency twofold, thereby laying the groundwork to challenge the detailed balance limit of solar cell efficiency. Our discourse primarily dissects the complex nature of SF in crystalline organic semiconductors, laying special emphasis on the anisotropic behavior of SF and the diffusion of the subsequent triplet excitons in single-crystalline polyacene organic semiconductors. We initiate this journey of discovery by elucidating the principles of MEG and SF, tracing their historical genesis, and scrutinizing the anisotropy of SF and the impact of quantum decoherence within the purview of functional mode electron transfer theory. We present an overview of prominent techniques deployed in investigating anisotropic SF in organic semiconductors, including femtosecond transient absorption microscopy and imaging as well as stimulated Raman scattering microscopies, and highlight recent breakthroughs linked with the anisotropic dimensions of Davydov splitting, Herzberg–Teller effects, SF, and triplet transport operations in single-crystalline polyacenes. Through this comprehensive analysis, our objective is to interweave the fundamental principles of anisotropic SF and triplet transport with the current frontiers of scientific discovery, providing inspiration and facilitating future ventures to harness the anisotropic attributes of organic semiconductor crystals in the design of pioneering photovoltaic and photonic devices.

Chemistry↗
DOE OSTI2024

Fermiology and transport properties of the candidate topological crystalline insulator SrAg 4 ⁢Sb 2

Compared to time-reversal symmetry-protected ℤ 2 topological insulators and Dirac/Weyl semimetals, there are significantly fewer candidates for topological crystalline insulators. SrAg 4 ⁢Sb 2 is predicted to exhibit topological crystalline insulator behavior when considering spin-orbit coupling. In this study, we systematically investigate single crystals of SrAg 4 ⁢Sb 2 using electrical transport and magnetic torque measurements, along with first-principles calculations. Our transport data reveals its compensated semimetal nature with a magnetoresistance up to around 700% at 2 K and 9 T. Analysis of de Haas–van Alphen oscillations uncovers a Fermi surface consisting of three distinct Fermi pockets with light effective masses. Comparison between the three-dimensional fermiology obtained from our oscillation data and the first-principles calculations demonstrates excellent agreement. This confirms the accuracy of the calculations, which indicate a band inversion centered at the 𝑇 point and identify the existence of nontrivial tube and needle hole Fermi pockets at Γ, alongside one trivial diamond electron pocket at the 𝐹 point in the Brillouin zone. Furthermore, symmetry and topology analysis results in two potential sets of topological invariants, suggesting the emergence of two-dimensional gapless Dirac surface states either on the 𝑎⁢𝑏 planes or on both the 𝑎⁢𝑏 planes and mirror planes, protected by crystal symmetries. Therefore, SrAg 4 ⁢Sb 2 emerges as a promising candidate topological crystalline insulator.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Development of a scalar-based geometric parameterization approach for the crystal structure landscape of dithienylethene-based crystalline solids

Dithienylethenes (DTEs) are a promising class of organic photoswitches that can be used to create crystalline solids with properties controlled by light. However, the ability of DTEs to adopt multiple conformations, only one of which is photoactive, complicates the rational design of these materials. Herein, the synthesis and structural characterization of 19 crystalline solids containing a single DTE molecule are described. A novel D – D analysis of the molecular geometries obtained from rotational potential energy surface calculations and the ensemble of experimental structures were used to construct a crystal landscape for DTE. Of the 19 crystal structures, 17 contained photoinactive DTE rotamers and only 2 were photoactive. These results highlight the challenges associated with the design of these materials. Overall, the D – D analysis described herein provides rapid, effective and intuitive means of linking the molecular structure to photoactivity that could be applied more broadly to afford a general strategy for producing photoactive diarylethene-based crystalline solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

New classes of topological crystalline insulators having surface rotation anomaly

We discover new types of quantum anomalies in two-dimensional systems with time-reversal symmetry (T) and discrete rotation symmetry with order of n = 2, 4, and 6 (C n ). The new anomalous states have n flavors of massless Dirac fermions protected by T and C n , whereas any two-dimensional lattices having the two symmetries must have a multiple of 4, 8, and 12 Dirac cones for n = 2, 4, and 6, respectively. We show that these anomalous states are physically realized on the surface of new classes of topological crystalline insulators, normal to the rotation axis. Moreover, these topological crystalline insulators support n gapless one-dimensional helical mode on the otherwise fully gapped side surface, connecting the anomalous two-dimensional states on the top and bottom surfaces. The presence of these helical modes enables a new quantum device made from a topological crystalline insulator nanorod, a “helical nanorod,” which has a quantized longitudinal conductance of ne 2 /h.

Science & Technology - Other Topics↗
DOE OSTI2026

Lithographic crystallinity regulation in additive fabrication of thermoplastics (CRAFT)

For semicrystalline polyolefin thermoplastics, the balance between interconnected ordered crystalline and disordered amorphous regions is paramount to their performance and processability. However, contemporary manufacturing strategies, from injection molding to three-dimensional (3D) printing, result in monolithic objects, unable to spatially encode crystallinity. We develop a light-based approach for fabricating mechanically robust polyolefin thermoplastics with microscopic control over crystallinity in 3D space. Light dosage governs polymer stereochemistry giving access to a continuum of materials, from strong rigid plastics, such as high-density polyethylene, to more extensible materials akin to low-density polyethylene, all at the flick of a switch. Leveraging this finding in lithographic grayscale 3D printing enables rapid multimaterial fabrication with voxel-level control over optical and mechanical properties, opening avenues in information storage, soft robotics, and energy damping.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Bottom-Up Approach to Rational Design of Crystalline Materials: Investigation of Vibronic Coherences Underlying Exciton Dynamics in Semiconductors

In this project we uncovered structure-function relationships of donor-acceptor co-crystals used to develop next-generation optoelectronic devices. Unraveling the photodynamics of molecular crystalline materials poses many challenges for spectroscopy due to broad, overlapping features representing numerous underlying dynamical processes. This leads researchers to make many assumptions about the dynamics of a system in choosing an appropriate kinetic fitting model. Computationally, electronic structure methods are either prohibitively expensive or underdeveloped for computing the excited state structure of molecular materials, especially states that exhibit charge transfer. Researchers must therefore perform calculations of excited electronic states using truncated models of molecular materials. Here we present a joint experimental-theoretical approach to bridging the gap between the photodynamics of a molecular material and its constituent molecules. We focus our efforts on quantifying the timescales and mechanisms of photoexcitation in donor-acceptor co-crystals and donor-acceptor dimers where the lowest-lying excited state is characterized by charge transfer from the donor to the acceptor. We employ ultrafast UV pump, UV-Vis probe transient absorption spectroscopy to unravel the time-resolved spectroscopic signatures of the photodynamics in both the crystalline material and donor-acceptor dimers in solution. We perform electronic structure and excited state dynamics calculations of the dimers to inform kinetic fitting models and assign the spectral features. The photodynamics of the crystal vs. dimer systems have many similarities, enabling unprecedented insights into the formation and evolution of charge transfer excitons in the crystalline systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interface-enhanced conductivities in surfactant-mediated, solution-grown ionic crystalline complexes

Renewable energy is increasingly relying on optimized electrolytes and interfaces. In this work, Tween 20 and sodium chloride are selected as a model system to reveal the effects of surfactants on salt crystallization in the context of ionic conductivity and interface optimization. At a varied crystallization speed and mix ratio, it is demonstrated that the resultant solution-grown ionic crystalline complexes can achieve a highly tunable ion transport with a controllable crystalline interface. X-ray diffraction results rule out the possibility of polymorphism in the NaCl/Tween 20 systems, which further supports the importance of an optimized crystalline network for optimizing permittivity or ionic conductivity. Raman mapping and machine learning techniques are used to perform semantic segmentation on highly heterogeneous NaCl/Tween 20 complexes. Furthermore, FTIR measurements demonstrate that inter- and intra-molecular interactions play critical roles in the formation of these crystals. This work lays a foundation toward future optimization of such complex ion systems for a specific salt or crystallization modifier in energy storage or ion transport applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Single step solution combustion synthesis of crystalline transuranic-doped rare earth zirconate pyrochlores

One-step solution combustion synthesis (SCS) methods for fabricating durable crystalline transuranic-doped rare earth zirconium pyrochlores are described. Methods are fast, amenable to upscaling, and present a simple strategy for producing crystalline ceramic materials that meet the minimum attractiveness criteria for special nuclear material. The methods include analysis of reactants and reaction conditions to select proper fuel as well as proper fuel content so as to encourage formation of the crystalline product in a single-step synthesis procedure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Composition for thiol-ene-based polymerization and liquid crystalline network-containing objects formed therefrom using additive manufacturing

Disclosed herein are embodiments of a composition that can be used to make liquid crystalline networks using thiol-ene-based polymerization. In particular embodiments, the liquid crystalline networks can be formed by using the composition embodiments in additive manufacturing methods. The composition comprises a monomer, chain extender compound, and a crosslinker compound and each of these components can be selected so as to influence the thermomechanical and shape memory properties of the liquid crystalline networks and/or objects formed therewith.

Rios, Orlando↗
DOE OSTI2026

Virtual Growth of SRF Materials: A Machine Learning Approach to Predict the Crystalline Structural Ordering in Nb Surface Oxides

Niobium's native surface oxide affects SRF cavity and superconducting qubit performance, motivating interest in controlling its crystalline structure. We combine a literature-derived machine-learning analysis with temperature-dependent XRD to study crystalline ordering in Nb2O5. Random Forest models, trained on 74 processing conditions from 17 papers and validated by leave-one-group-out cross-validation, predicted broad crystallinity outcomes well (balanced accuracy 0.809), but struggled with specific polymorph identity (0.577). Annealing temperature was the dominant predictor across all targets; oxygen partial pressure showed negligible importance, reflecting narrow literature coverage rather than physical irrelevance. Temperature-dependent XRD on anodized and H2O2-treated Niobium showed structural evolution consistent with the machine learning predictions. Our model and overall approach provide a data-driven framework for identifying and optimizing conditions that promote crystallization in initially amorphous oxides. This framework can guide the selection of growth and post-annealing conditions for Nb surfaces by narrowing the experimental parameter space, thereby reducing trial-and-error efforts in developing oxide structures relevant to SRF applications.

Tilkin, Anthony [Unlisted, US, IL; Fermilab]↗
DOE OSTI2023

Smartly Optimizing Crystallinity, Compatibility, and Morphology for Polymer Solar Cells by Small Molecule Acceptor with Unique 2D-EDOT Side Chain

A desired morphology is essential for achieving efficient polymer solar cells. Donors and acceptors with appropriate crystallization can lead to a suitable phase-separated morphology for effective photocurrent generation process. Inspired by the success of Y6 acceptors and the 2D side chain engineering on popular polymer donors and small molecule acceptors, the usage of unique 2D 3,4-ethylene dioxythiophene (EDOT) side chains on Y6 to regulate its crystallinity, compatibility, and thus the related blend morphology is explored. Here, in this study, two molecules of BTP-EDOT-4F and BTP-EDOT-4Cl with such unique 2D EDOT side chains are designed and synthesized. Due to the advantage of EDOT side chain, when these molecules are blended with PM6, the decent power conversion efficiencies (PCEs) of 16.78% and 15.87% are obtained. Furthermore, BTP-EDOT-4F is selected as the third component and added into PM6:L8-BO binary system to form ternary blends. The optimized crystallinity, compatibility, and morphology of such ternary blend are discovered in the presence of BTP-EDOT-4F, which enables efficient exciton dissociation and charge transport as well as decreased recombination, resulting in higher short circuit current density (J sc ) and fill factor. Finally, the outstanding PCE of 18.56% is achieved in ternary blends containing PM6, L8-BO, and BTP-EDOT-4F.

2D EDOT side chains↗
DOE OSTI2022

Topological Crystalline Insulator Candidate ErAsS with Hourglass Fermion and Magnetic-Tuned Topological Phase Transition

Topological crystalline insulators (TCIs) with hourglass fermion surface state have attracted a lot of attention and are further enriched by crystalline symmetries and magnetic order. Here, the emergence of hourglass fermion surface state and exotic phases in the newly discovered, air-stable ErAsS single crystals are shown. In the paramagnetic phase, ErAsS is expected to be a TCI with hourglass fermion surface state protected by the nonsymmorphic symmetry. Dirac-cone-like bands and nearly linear dispersions in large energy range are experimentally observed, consistent well with theoretical calculations. Below T N ≈ 3.27 K, ErAsS enters a collinear antiferromagnetic state, which is a trivial insulator breaking the time-reversal symmetry. An intermediate incommensurate magnetic state appears in a narrow temperature range (3.27–3.65 K), exhibiting an abrupt change in magnetic coupling. Overall, the results reveal that ErAsS is an experimentally available TCI candidate and provide a unique platform to understand the formation of hourglass fermion surface state and explore magnetic-tuned topological phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Surface‐Enforced Alignment of Reprogrammable Liquid Crystalline Elastomers

Abstract Liquid crystalline elastomers (LCEs) are stimuli‐responsive materials capable of undergoing large deformations. The thermomechanical response of LCEs is attributable to the coupling of polymer network properties and disruption of order between liquid crystalline mesogens. Complex deformations have been realized in LCEs by either programming the nematic director via surface‐enforced alignment or localized mechanical deformation in materials incorporating dynamic covalent chemistries. Here, the preparation of LCEs via thiol‐Michael addition reaction is reported that are amenable to surface‐enforced alignment. Afforded by the thiol‐Michael addition reaction, dynamic covalent bonds are uniquely incorporated in chemistries subject to surface‐enforce alignment. Accordingly, LCEs prepared with complex director profiles are able to be programmed and reprogrammed by (re)activating the dynamic covalent chemistry to realize distinctive shape transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Heteromeric Carboxylic Acid Based Single-Crystalline Crosslinked Organic Framework

The development of large pore single-crystalline covalently linked organic frameworks is critical in revealing the detailed structure-property relationship with substrates. One emergent approach is to photo-crosslink hydrogen-bonded molecular crystals. Introducing complementary hydrogen-bonded carboxylic acid building blocks is promising to construct large pore networks, but these molecules often form interpenetrated networks or non-porous solids. In this report we introduced heteromeric carboxylic acid dimers to construct a non-interpenetrated molecular crystal. Crosslinking this crystal precursor with dithiols afforded a large pore single-crystalline hydrogen-bonded crosslinked organic framework H C OF-101. X-ray diffraction analysis revealed H C OF-101 as an interlayer connected hexagonal network, which possesses flexible linkages and large porous channels to host a hydrazone photoswitch. Multicycle Z/E-isomerization of the hydrazone took place reversibly within H C OF-101, showcasing the potential use of H C OF-101 for optical information storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrasmall Cu Nanoparticles Supported on Crystalline, Mesoporous ZnO for Selective CO 2 Hydrogenation

Converting CO 2 to value-added chemicals, e. g., CH 3 OH, is highly desirable in terms of the carbon cycling while reducing CO 2 emission from fossil fuel combustion. Cu-based nanocatalysts are among the most efficient for selective CO 2 -to-CH 3 OH transformation; this conversion, however, suffers from low reactivity especially in the thermodynamically favored low temperature range. We herein report ultrasmall copper (Cu) nanocatalysts supported on crystalline, mesoporous zinc oxide nanoplate (Cu@mZnO) with notable activity and selectivity of CO 2 -to-CH 3 OH in the low temperature range of 200–250 °C. Cu@mZnO nanoplates are prepared based on the crystal-crystal transition of mixed Cu and Zn basic carbonates to mesoporous metal oxides and subsequent hydrogen reduction. Under the nanoconfinement of mesopores in crystalline ZnO frameworks, ultrasmall Cu nanoparticles with an average diameter of 2.5 nm are produced. Cu@mZnO catalysts have a peak CH 3 OH formation rate of 1.13 mol h −1 per 1 kg under ambient pressure at 246 °C, about 25 °C lower as compared to that of the benchmark catalyst of Cu−Zn−Al oxides. In conclusion, our new synthetic strategy sheds some valuable insights into the design of porous catalysts for the important conversion of CO 2 -to-CH 3 OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗