Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross Section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Experimental differential and integral electron impact cross sections for the B /1-Sigma-u +/ state of H2 in the intermediate-energy region

Utilizing a crossed electron-beam-molecular-beam scattering technique, differential electron impact cross sections (DCS) for the excitation of the nu prime = 2 vibrational band of the B (1-Sigma-u +) state of H2 have been measured and are presented for the first time. These measurements were made at electron impact energies of 15, 20, 30, 40, 50 and 60 eV. At each energy, DCS between scattering angles of 10 and 135 deg were determined. They were then extrapolated to 0 and 180 deg scattering angles to obtain the integral cross sections. These integral cross sections and the Frank-Condon factor for the nu prime = 2 band were used to calculate the total cross sections for the excitation of the B (1-Sigma-u +).

Srivastava, S. K.↗
NASA NTRS2003

The Status of Cross Section Measurements for Neutron-induced Reactions Needed for Cosmic Ray Studies

Cosmic ray interactions with lunar rocks and meteorites produce small amounts of radionuclides and stable isotopes. Advances in Accelerator Mass Spectrometry (AMS) allow production rates to be measured routinely in well-documented lunar rocks and meteorites. These measurements are analyzed using theoretical models to learn about the object itself and the history of the cosmic rays that fell on it. Good cross section measurements are essential input to the theoretical calculations. Most primary cosmic ray particles are protons so reliable cross sections for proton-induced reactions are essential. A cross section is deemed accurate if measurements made by different experimenters using different techniques result in consistent values. Most cross sections for proton induced reactions are now well measured. However, good cross section measurements for neutron-induced reactions are still needed. These cross sections are required to fully account for all galactic cosmic ray interactions at depth in an extraterrestrial object. When primary galactic cosmic ray (GCR) particles interact with an object many secondary neutrons are produced, which also initiate spallation reactions. Thus, the total GCR contribution to the overall cosmogenic nuclide archive has to include the contribution from the secondary neutron interactions. Few relevant cross section measurements have been reported for neutron-induced reactions at neutron energies greater than approximately 20 MeV. The status of the cross section measurements using quasi-monoenergetic neutron energies at iThemba LABS, South Africa and white neutron beams at Los Alamos Neutron Science Center (LANSCE), Los Alamos are reported here.

Sisterson, J. M.↗
NASA NTRS1988

Vibrational-excitation cross sections of water molecules by electron impact

A crossed-beam technique was used to measure absolute differential cross sections for the vibrational excitation of water-vapor molecules. The energy and angular range were from 2.2 to 20 eV and from 30 to 150 deg. Vibrational-excitation cross sections were determined for the bending (010) and stretching (100 and 001) modes of the electronic ground state. It is shown that the integral cross sections are generally larger than those of Seng and Linder (1976) by 10-20 percent for both the bending and stretching modes. It is noted that the results obtained are of interest in connection with the theoretical modeling of cometary ionospheres.

Shyn, T. W.↗
NASA NTRS2001

Proton-Nucleus Elastic Cross Sections Using Two-Body In-Medium Scattering Amplitudes

Recently, a method was developed of extracting nucleon-nucleon (NN) cross sections in the medium directly from experiment. The in-medium NN cross sections form the basic ingredients of several heavy-ion scattering approaches including the coupled-channel approach developed at the Langley Research Center. The ratio of the real to the imaginary part of the two-body scattering amplitude in the medium was investigated. These ratios are used in combination with the in-medium NN cross sections to calculate elastic proton-nucleus cross sections. The agreement is excellent with the available experimental data. These cross sections are needed for the radiation risk assessment of space missions.

Tripathi, R. K.↗
NASA NTRS1982

The radar cross section of dielectric disks

A solution is presented for the backscatter (nonstatic) radar cross section of dielectric disks of arbitrary shape, thickness and dielectric constant. The result is obtained by employing a Kirchhoff type approximation to obtain the fields inside the disk. The internal fields induce polarization and conduction currents from which the scattered fields and the radar cross section can be computed. The solution for the radar cross section obtained in this manner is shown to agree with known results in the special cases of normal incidence, thin disks and perfect conductivity. The solution can also be written as a product of the reflection coefficient of an identically oriented slab times the physical optics solution for the backscatter cross section of a perfectly conducting disk of the same shape. This result follows directly from the Kirchhoff type approximation without additional assumptions.

D M Le Vine↗
NASA NTRS2002

Cross-sectional structural parameters from densitometry

Bone densitometry has previously been used to obtain cross-sectional properties of bone from a single X-ray projection across the bone width. Using three unique projections, we have extended the method to obtain the principal area moments of inertia and orientations of the principal axes at each scan cross-section along the length of the scan. Various aluminum phantoms were used to examine scanner characteristics to develop the highest accuracy possible for in vitro non-invasive analysis of cross-sectional properties. Factors considered included X-ray photon energy, initial scan orientation, the angle spanned by the three scans (included angle), and I(min)/I(max) ratios. Principal moments of inertia were accurate to within +/-3.1% and principal angles were within +/-1 degrees of the expected value for phantoms scanned with included angles of 60 degrees and 90 degrees at the higher X-ray photon energy (140 kVp). Low standard deviations in the error (0.68-1.84%) also indicate high precision of calculated measurements with these included angles. Accuracy and precision decreased slightly when the included angle was reduced to 30 degrees. The method was then successfully applied to a pair of excised cadaveric tibiae. The accuracy and insensitivity of the algorithms to cross-sectional shape and changing isotropy (I(min)/I(max)) values when various included angles are used make this technique viable for future in vivo studies.

NASA Center ARC↗
NASA NTRS1980

Electron impact cross sections for v = 0-1 vibrational excitation in CO at electron energies of 3 to 100 eV

The paper discusses the measurements of normalized, absolute differential cross-sections for electron-impact vibrational transition in CO. Integral and momentum-transfer cross-sections were obtained from these differential results; incident electron energies were in the 3 to 100 eV range, and the scattering angles were 10 to 135 deg. A comparison of these results with measurements made with pure vibrationally elastic cross-sections in N2, and with the data based on a two-potential theory for electron scattering from diatomic molecules showed that the present CO cross-sections are similar to those in N2. This indicates that the long-range effect of the small CO dipole moment is negligible in promoting vibrational excitation; moreover, a significant peak in the integral and momentum-transfer cross-sections is observed at 20 eV. Finally, the low-energy integral cross-sections are compared with a recent set of swarm data for vibrational excitation.

Chutjian, A.↗
NASA NTRS1988

Ionisation cross sections of rare-gas atoms by electron impact

A pulsed electron beam and ion extraction method is used to measure normalized values of partial ionization cross sections for rare gases from threshold to 1000 eV. Cross sections obtained for singly ionized species are used to calibrate the mass transmission efficiency of the ion extraction/analyzer/detection system by the relative flow technique, and this mass transmission curve is then used to determine the absolute cross sections of the multiply ionized species. Total ion cross sections are found by summation of the individual partial cross sections with proper weighting for charge.

Krishnakumar, E.↗
NASA NTRS1997

Determination of Spectroscopic Properties of Atmospheric Molecules from High Resolution Vacuum Ultraviolet Cross Section and Wavelength Measurements

An account is given of progress during the period 8/l/96-7/31/97 on work on (a) cross section measurements of O2 S-R using a Fourier transform spectrometer (FTS) at the Photon Factory in Japan; (b) the determination of the predissociation linewidths of the Schumann-Runge bands (S-R) of 02; (c) cross section measurements of 02 Herzberg bands using a Fourier transform spectrometer (FTS) at Imperial College; and (d) cross section measurements of H2O in the wavelength region 120-188 nm. The experimental investigations are effected at high resolution with a 6.65 m scanning spectrometer and with the Fourier transform spectrometer. Below 175 nm, synchrotron radiation is most suitable for cross section measurements in combination with spectrometers at the Photon Factory Japan. Cross section measurements of the Doppler limited bands depend on using the very high resolution, available with the Fourier transform spectrometer, (0.025/cm resolution). All of these spectroscopic measurements are needed for accurate calculations of the production of atomic oxygen, the penetration of solar radiation into the Earth's atmosphere, and photochemistry of minor molecules.

Parkinson, W. H.↗
NASA NTRS1970

The variation of radar cross section with wind

X-band (8910 megahertz) and C-band (4455 megahertz) measurements indicate that two domains exist in the variation of radar cross section with wind at incident angles far from the normal. The first domain for flow windspeeds is characterized by a rapid variation of radar cross section with wind and the second domain at higher windspeeds by an asymptotic approach to an upper limit (saturation). The transaction between the two domains occurs at a windspeed of approximately 10 knots. Recent Joint Ocean Surface Study I observations tend to confirm this observation and offer additional proof of the validity of a composite surface model which relates the radar cross section of the sea to the wave-height spectrum. This confirmation was obtained by comparing the radar cross section measured by the four-frequency radar system with the radar cross section calculated from the ocean wave-height spectrum that had been determined by the optical analysis of photographs taken at the same time. A possible explanation for the wind variation of the radar cross section of the open ocean also was evolved, based on radar measurements in a wave tank under various wind conditions and subsequent comparison with optically determined spectra.

Guinard, N. W.↗
NASA NTRS1989

Medium-resolution studies of extreme ultraviolet emission from N2 by electron impact - Vibrational perturbations and cross sections of the c4-prime 1Sigma(+)u and b-prime 1Sigma(+)u states

In a crossed-beam experiment the electron-impact-induced fluorescence spectrum of N2 in the extreme ultraviolet is studied at a spectral resolution of up to 0.03 nm. The optically thin experiment obtained the highest-resolution electron-impact emission spectrum of the Rydberg and valence states of N2. The spectral measurements provide the emission cross sections of each of the vibrational transitions of the Carroll-Yoshino and the Birge-Hopfield-II band systems. Laboratory vibrational-excitation cross sections arising from the mutual perturbation of the c4-prime 1Sigma(+)u and b-prime 1Sigma(+)u states by homogeneous configuration interactions are measured from 10 to 400 eV, and a modified Born approximation analytic model is given for them. The analysis leads to accurate band-system oscillator strengths. The relative emission and excitation cross sections each of the vibrational levels are compared. In addition, low-resolution measurements of the cross section of the atomic dissociation fragments (NI, NII, NIII) from 40 to 102 nm are made, and medium-resolution measurements are made of the emission cross section of the c4 1Pi(u), c5-prime 1Sigma(+)u, c5 1Pi(u), and c6-prime 1Sigma(+)u to X 1Sigma(+)g (0,0) transitions.

Ajello, Joseph M.↗
NASA NTRS1991

Resonance charge transfer, transport cross sections, and collision integrals for N(+)(3P)-N(4S0) and O(+)(4S0)-O(3P) interactions

N2(+) and O2(+) potential energy curves have been constructed by combining measured data with the results from electronic structure calculations. These potential curves have been employed to determine accurate charge exchange cross sections, transport cross sections, and collision integrals for ground state N(+)-N and O(+)-O interactions. The cross sections have been calculated from a semiclassical approximation to the scattering using a computer code that fits a spline curve through the discrete potential data and incorporates the proper long-range behavior of the interactions forces. The collision integrals are tabulated for a broad range of temperatures 250-100,000 K and are intended to reduce the uncertainty in the values of the transport properties of nonequilibrium air, particularly at high temperatures.

Stallcop, James R.↗
NASA NTRS1982

Electron impact cross sections for the 2,2P state excitation of lithium

Electron impact excitation of the 2p 2P state of Li was studied at 10, 20, 60, 100, 150 and 200 eV. Relative differential cross sections in the angular range 3-120 deg were measured and then normalized to the absolute scale by using the optical f value. Integral and momentum transfer cross sections were obtained by extrapolating the differential cross sections to 0 deg and to 180 deg. The question of normalizing electron-metal-atom collision cross sections in general was examined and the method of normalization to optical f values in particular was investigated in detail. It has been concluded that the extrapolation of the apparent generalized oscillator strength (obtained from the measured differential cross sections) to the zero momentum transfer limit with an expression using even powers of the momentum transfer and normalization of the limit to the optical f value yields reliable absolute cross sections.

Vuskovic, L.↗
NASA NTRS2016

Average Cross-Sectional Area of DebriSat Fragments Using Volumetrically Constructed 3D Representations

Debris fragments from the hypervelocity impact testing of DebriSat are being collected and characterized for use in updating existing satellite breakup models. One of the key parameters utilized in these models is the ballistic coefficient of the fragment which is directly related to its area‐to‐mass ratio. However, since the attitude of fragments varies during their orbital lifetime, it is customary to use the average cross‐sectional area in the calculation of the area‐to‐mass ratio. The average cross‐sectional area is defined as the average of the projected surface areas perpendicular to the direction of motion and has been shown to be equal to one‐fourth of the total surface area of a convex object. Unfortunately, numerous fragments obtained from the DebriSat experiment show significant concavity (i.e., shadowing) and thus we have explored alternate methods for computing the average cross‐sectional area of the fragments. An imaging system based on the volumetric reconstruction of a 3D object from multiple 2D photographs of the object was developed for use in determining the size characteristic (i.e., characteristics length) of the DebriSat fragments. For each fragment, the imaging system generates N number of images from varied azimuth and elevation angles and processes them using a space‐carving algorithm to construct a 3D point cloud of the fragment. This paper describes two approaches for calculating the average cross‐sectional area of debris fragments based on the 3D imager. Approach A utilizes the constructed 3D object to generate equally distributed cross‐sectional area projections and then averages them to determine the average cross‐sectional area. Approach B utilizes a weighted average of the area of the 2D photographs to directly compute the average cross‐sectional area. A comparison of the accuracy and computational needs of each approach is described as well as preliminary results of an analysis to determine the "optimal" number of images needed for the 3D imager to accurately measure the average cross sectional area of objects with known dimensions.

Scruggs, T.↗
NASA NTRS2005

Integral cross sections for the direct excitation of the A 3 (sigma) u +, B 3 (pi) g, W 3 (delta) u, B' 3 (sigma) u -, a' 1 (sigma) u -, a 1 (pi) g, w 1 (delta) u, and C 3 (pi) u electronic states in

Integral cross sections for electron impact excitation out of the ground state (X 1(sigma)g +) to the A 3(sigma)u +, B 3(pi)g, W 3(delta)u, B' 3(sigma)u -, a' 1(sigma)u -, a 1(pi)g, w 1(delta)u, and states in N2 are reported at incident energies ranging between 10 and 100 eV. These data have been derived by integrating differential cross sections previously reported by this group. New differential cross section measurements for the a 1(pi)g state at 200 eV are also presented to extend the range of the reported integral cross sections for this state, which is responsible for the emissions of the Lyman-Birge-Hopfield band system (a 1(pi)g (rightwards arrow) X 1(sigma)g +). The present results are compared and critically evaluated against existing cross sec In general, the present cross sections are smaller than previous results at low impact energies from threshold through the excitation function peak regions. These lower cross sections have potentially significant implications on our understanding of UV emissions in the atmospheres of Earth and Titan.

Ultraviolet Imaging Spectograph↗
NASA NTRS1985

The ultraviolet cross-sections of ozone. I. The measurements. II - Results and temperature dependence

Absorption cross-sections of ozone have been measured over the range 230 nm to 350 nm, and for temperatures 200 K to 300 K, with improved photometric accuracy and spectral resolution. These measurements are referred to the cross-section at the 253.65 nm mercury line by the Hearn value (1961), 1147 x 10 to the -20th/sq cm, and show an internal consistency of + or - 1 percent. Tables of ozone absorption cross-section in the ultraviolet have been prepared for intervals of 0.05 nm over the range 245 to 340 nm. at each wavelength entry in the table a set of coefficients has been derived that permits the cross-section to be computed as a function of temperature, between 200 K and 300 K, with an accuracy of 1 percent.

Bass, A. M.↗
NASA NTRS1971

Differential cross sections at forward angles for hydrogen and helium particles from 62 MeV protons incident on Ni-60

Tabulated differential cross sections are presented for the production, at angles of 15, 20, 25, and 40 deg, of proton, deuteron, triton, helium-3, and alpha particles from Ni-60 bombarded by 62-MeV protons. Continuum cross sections are listed in about 1-MeV bins for energies above lower cutoffs which range from 4 to 15 MeV for the different types of exit particles. Only the integral cross section is known for a considerable energy range within each spectrum. The proton, deuteron, and alpha particle cross sections are the same in the continuum range region above the evaporation peak as those cross sections previously observed for Fe-54 and Fe-56, but the corresponding yield of tritons is higher from Ni-60 and Fe-56 than from Fe-54.

Peelle, R. W.↗
NASA NTRS1993

Measurements of absolute absorption cross sections of ozone in the 185- to 254-nm wavelength region and the temperature dependence

Laboratory measurements of the relative absorption cross sections of ozone at temperatures 195, 228, and 295 K have been made throughout the 185 to 254 nm wavelength region. The absolute absorption cross sections at the same temperatures have been measured at several discrete wavelengths in the 185 to 250 nm region. The absolute cross sections of ozone have been used to put the relative cross sections on a firm absolute basis throughout the 185 to 255 nm region. These recalibrated cross sections are slightly lower than those of Molina and Molina (1986), but the differences are within a few percent and would not be significant in atmospheric applications.

Yoshino, K.↗