SEARCH · Engineering Papers

Results for “Concurrent effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1999

Assessing the Impact of Aircraft Emissions on the Stratosphere

For the past decade, the NASA Atmospheric Effects of Aviation Project (AEAP) has been the U.S. focal point for research on aircraft effects. In conjunction with U.S. basic research programs, AEAP and concurrent European research programs have driven remarkable progress reports released in 1999 [IPCC, 1999; Kawa et al., 1999]. The former report primarily focuses on aircraft effects in the upper troposphere, with some discussion on stratospheric impacts. The latter report focuses entirely on the stratosphere. The current status of research regarding aviation effects on stratospheric ozone and climate, as embodied by the findings of these reports, is reviewed. The following topics are addressed: Aircraft Emissions, Pollution Transport, Atmospheric Chemistry, Polar Processes, Climate Impacts of Supersonic Aircraft, Subsonic Aircraft Effect on the Stratosphere, Calculations of the Supersonic Impact on Ozone and Sensitivity to Input Conditions.

Kawa, S. R.↗

NASA NTRS2019

Sea Surface Salinity Distribution in the Southern Ocean as Observed from Space

Large-scale spatial and temporal variabilities of sea surface salinity (SSS) in the Southern Ocean from 2011 to 2017 were studied using products derived from microwave sensors on board Aquarius, Soil Moisture and Ocean Salinity (SMOS), and Soil Moisture Active and Passive (SMAP) satellites. Four products, three from Aquarius and one from SMOS, were evaluated and shown to be generally consistent within 0.3 to 0.6 psu and agree favorably with in situ measurements. However, although the Aquarius products show consistent seasonality of SSS with high values of 34.45 psu in October and low values of 33.40 psu in May, theSMOS and SMAP products lack such seasonal variations. This may be caused by larger uncertainties in the SMOS and SMAP data due in part to the lack of concurrent scatterometer measurements that is used to correct for roughness effects. The four products provide similar spatial distributions of SSS with root mean square difference from 0.25 to 0.58 psu. Differences among Aquarius products are mainly due to varying salinity retrieval algorithms, smoothing, and masking of sea ice, while the SMOS product showed the highest SSS deviation that is likely due to the bias adjustment done on the data set. Our analyses show that SSS in the Southern Ocean region has significant meridional variations with the lowest SSS near the ice edge and highest at lower latitudes. The SSS is also lowest in summer indicating the predominant influence of sea ice and glacial melt, but it stays low near ice edges even during the growth season. Salinity together with temperature is the key parameters that control the state and circulation of the World's oceans. The large‐scale distribution of the sea surface salinity of the Southern Ocean is quantified for the first time using Aquarius, Soil Moisture and Ocean Salinity, and Soil Moisture Active and Passive satellite microwave data. Seasonal and interannual changes in the distribution as affected by the sea ice cover, surface temperature, and precipitation are evaluated. Comparative studies were done, using four different products that are publicly available, in conjunction with in situ observations to gain insights into the true nature of the distribution and how consistently the sea surface salinity is depicted by the different products. There are general consistencies in the products, and discrepancies are attributed to different algorithms, smoothing techniques, and sea ice masking. Aquarius data are shown to have higher accuracy than Soil Moisture and Ocean Salinity and Soil Moisture Active and Passive products in part because of having concurrent scatterometer that provides accurate correction to roughness effects.

Garcia-Eidell, Cynthia↗

DOE OSTI2023

Perovskite-Sensitized Upconversion under Operando Conditions

Perovskite-sensitized upconversion (UC) has resulted in near-infrared-to-visible UC at solar-relevant fluxes. However, the successful implementation of UC devices into operating solar cells will result in exposure to similar environmental stressors as for the commercial photovoltaics (PVs), mainly elevated temperatures, and continuous irradiation. In this article, we investigated the effects of these two stressors, heat and light, on the triplet generation process at the perovskite/rubrene interface. Following exposure to both stressors, local discrepancies across the upconversion device were discovered. Here, the first region showed changes to the morphology, and no detectable upconverted emission was observed. Through the combination of optical microscopy and spectroscopy, crystallization of the organic semiconductor layer, degradation of dibenzotetraphenylperiflanthene, and concurrent degradation of the perovskite sensitizer were found. These effects culminate in a reduction in both triplet generation and triplet–triplet annihilation. In the second region, no changes to the morphology were present and visible UC emission was observed following exposure to both stressors. To probe the triplet sensitization process at elevated temperatures, transient absorption spectroscopy was performed. The presence of the excited spin-triplet state of rubrene at 60 °C highlighted successful triplet generation even at elevated temperatures. This work emphasizes the challenges and continued potential for the integration of perovskite-sensitized UC into commercial photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Energetic Electron Precipitation Driven by Electromagnetic Ion Cyclotron Waves from ELFIN’s Low Altitude Perspective

We review comprehensive observations of electromagnetic ion cyclotron (EMIC) wave-driven energetic electron precipitation using data collected by the energetic electron detector on the Electron Losses and Fields InvestigatioN (ELFIN) mission, two polar-orbiting low-altitude spinning CubeSats, measuring 50-5000 keV electrons with good pitch-angle and energy resolution. EMIC wave-driven precipitation exhibits a distinct signature in energy-spectrograms of the precipitating-to-trapped flux ratio: peaks at >0.5 MeV which are abrupt (bursty) (lasting ~17 s, or ΔL ~ 0.56) with significant substructure (occasionally down to sub-second timescale). We attribute the bursty nature of the precipitation to the spatial extent and structuredness of the wave field at the equator. Multiple ELFIN passes over the same MLT sector allow us to study the spatial and temporal evolution of the EMIC wave - electron interaction region. Case studies employing conjugate ground-based or equatorial observations of the EMIC waves reveal that the energy of moderate and strong precipitation at ELFIN approximately agrees with theoretical expectations for cyclotron resonant interactions in a cold plasma. Using multiple years of ELFIN data uniformly distributed in local time, we assemble a statistical database of ~50 events of strong EMIC wave-driven precipitation. Most reside at L ~ 5 – 7 at dusk, while a smaller subset exists at L ~ 8 – 12 at post-midnight. The energies of the peak-precipitation ratio and of the half-peak precipitation ratio (our proxy for the minimum resonance energy) exhibit an L-shell dependence in good agreement with theoretical estimates based on prior statistical observations of EMIC wave power spectra. The precipitation ratio’s spectral shape for the most intense events has an exponential falloff away from the peak (i.e., on either side of ~ 1.45 MeV). It too agrees well with quasi-linear diffusion theory based on prior statistics of wave spectra. It should be noted though that this diffusive treatment likely includes effects from nonlinear resonant interactions (especially at high energies) and nonresonant effects from sharp wave packet edges (at low energies). Sub-MeV electron precipitation observed concurrently with strong EMIC wave-driven >1 MeV precipitation has a spectral shape that is consistent with efficient pitch-angle scattering down to ~ 200-300 keV by much less intense higher frequency EMIC waves at dusk (where such waves are most frequent). At ~100 keV, whistler-mode chorus may be implicated in concurrent precipitation. These results confirm the critical role of EMIC waves in driving relativistic electron losses. Nonlinear effects may abound and require further investigation.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1994

Flight service evaluation of composite helicopter components

This paper presents the results of a NASA funded contract and Sikorsky research and development programs to evaluate structural composite components in flight service on Sikorsky Model S-76 helicopters. Selected components were removed and tested at prescribed intervals over a nine year time frame. Four horizontal stabilizers and thirteen tail rotor spars were returned from commercial service in West Palm Beach, Florida and in the Gulf Coast region of Louisiana to determine the long term effects of operations in hot and humid climates on component performance. Concurrent with the flight component evaluation, panels of materials used in their fabrication were exposed to the environment in ground racks. Selected panels were tested annually to determine the effects of exposure on physical and mechanical properties. The results of 55,741 component flight hours and 911 months of field exposure are reported and compared with initial Federal Aviation Administration (FAA) certification data. The findings of this program have provided increased confidence in the long term durability of advanced composite materials used in helicopter structural applications.

Mardoian, George H.↗

NASA NTRS1994

Methodologies and systems for heterogeneous concurrent computing

Heterogeneous concurrent computing is gaining increasing acceptance as an alternative or complementary paradigm to multiprocessor-based parallel processing as well as to conventional supercomputing. While algorithmic and programming aspects of heterogeneous concurrent computing are similar to their parallel processing counterparts, system issues, partitioning and scheduling, and performance aspects are significantly different. In this paper, we discuss critical design and implementation issues in heterogeneous concurrent computing, and describe techniques for enhancing its effectiveness. In particular, we highlight the system level infrastructures that are required, aspects of parallel algorithm development that most affect performance, system capabilities and limitations, and tools and methodologies for effective computing in heterogeneous networked environments. We also present recent developments and experiences in the context of the PVM system and comment on ongoing and future work.

Sunderam, V. S.↗

NASA NTRS2007

Environmental Public Health Surveillance for Exposure to Respiratory Health Hazards: A Joint NASA/CDC Project to Use Remote Sensing Data for Estimating Airborne Particulate Matter Over the Atlanta, Georgia Metropolitan Area

Quattrochi, Dale A.↗

NASA NTRS2006

Utility of MODIS Aerosol Optical Depth for Estimating PM2.5 Exposure in Environmental Public Health Surveillance

As part of the National Environmental Public Health Tracking Network (EPHTN) the National Center for Environmental Health (NCEH) at the Centers for Disease Control and Prevention (CDC) is leading a project called Health and Environment Linked for Information Exchange (HELIX-Atlanta). The goal of developing the National Environmental Public Health Tracking Network is to improve the health of communities. Currently, few systems exist at the state or national level to concurrently track many of the exposures and health effects that might be associated with environmental hazards. An additional challenge is estimating exposure to environmental hazards such as particulate matter whose aerodynamic diameter is less than or equal to 2.5 micrometers (PM(2.5)) HELIX-Atlanta's goal is to examine the feasibility of building an integrated electronic health and environmental data network in five counties of Metropolitan Atlanta, GA (Clayton, Cobb, DeKalb, Fulton, and Gwinnett counties). Under HELIX-Atlanta, pilot projects are being conducted to develop methods to characterize exposure; link health and environmental data; analyze the relationship between health and environmental factors; and communicate findings. NASA Marshall Space Flight Center (NASA/MSFC) is collaborating with CDC to combine NASA earth science satellite observations related to air quality and environmental monitoring data to model surface estimates of PM(2.5) concentrations that can be linked with clinic visits for asthma. From 1999-2000 there were over 9,400 hospitalizations per year in Georgia with asthma as the primary diagnosis. The majority of these hospitalizations occurred in medical facilities in the five most populous Metro-Atlanta counties. Hospital charges resulting from asthma in Georgia are approximately $59 million dollars annually. There is evidence in the research literature that asthmatic persons are at increased risk of developing asthma exacerbations with exposure to environmental factors, including PM(2.5). Thus, HELIX-Atlanta is focusing on methods for characterizing population exposure to PM(2.5) for the Atlanta metropolitan area that could be used in on-going surveillance. While use of the Air Quality System, (AQS) PM(2.5) data alone could meet HELIX Atlanta, specifications, there are only five AQS sites in the Atlanta area, thus the spatial coverage is not ideal. Also, the AQS ground observations are made at time intervals ranging from one hour to six days leaving some temporal gaps. NASA Moderate Resolution Imaging Spectroradiometer (MODIS) satellite Aerosol Optical Depth (AOD) data have the potential for estimating daily ground level PM(2.5) at 10 km resolution over the metropolitan Atlanta area supplementing the AQS ground observations and filling their spatial and temporal gaps.

Al-Hamdan, Mohammad↗

NASA NTRS2020

Human Research Program Standard Measures in Analogs

To ensure that a minimal set of measures, relevant to human spaceflight risks, is consistently captured from subjects participating in spaceflight analog environments • The data from these measures will be placed in an archive managed by HRP and made available to studies via data sharing agreements • HRP Standard Measures will constitute a database for: – Providing context for data acquired by concurrent experiments – Supporting or developing hypotheses – Evaluating the effectiveness of various countermeasure profiles – Comparing population responses to various mission durations and scenarios

Clement, Gilles R.↗

NASA NTRS1979

A project to investigate mechanisms and methodologies for the design and construction of communicating concurrent processes in real-time environments

Research undertaken in 1979 into effective and appropriate mechanisms to aid in the design and construction of software for use in the flight research programs undertaken by NASA is presented.

Campbell, R. H.↗

NASA NTRS1981

A multi-frequency measurement of thermal microwave emission from soils: The effects of soil texture and surface roughness

An experiment on remote sensing of soil moisture content was conducted over bare fields with microwave radiometers at the frequencies of 1.4 GHz, 5 GHz, and 10.7 GHz during July - September of 1981. Three bare fields with different surface roughnesses and soil textures were prepared for the experiment. Ground truth acquisition of soil temperatures and moisture contents for 5 layers down to the depths of 15 cm was made concurrently with radiometric measurements. The experimental results show that the effect of surface roughness is to increase the soils' brightness temperature and to reduce the slope of regression between brightness temperature and moisture content. The slopes of regression for soils with different textures are found to be comparable, and the effect of soil texture is reflected in the difference of regression line intercepts at brightness temperature axis. The result is consistent with laboratory measurement of soils' dielectric permittivity. Measurements on wet smooth bare fields give lower brightness temperatures at 5 GHz than at 1.4 GHz.

Wang, J. R.↗

NASA NTRS1982

A multi-frequency measurement of thermal microwave emission from soils - The effect of soil texture and surface roughness

An experiment on remote sensing of soil moisture content was conducted over bare fields with microwave radiometers at the frequencies of 1.4 GHz, 5 GHz, and 10.7 GHz during July September of 1981. Three bare fields with different surface roughneses and soil textures were prepared for the experiment. Ground truth acquisition of soil temperatures and moisture contents for 5 layers down to the depth of 15 cm was made concurrently with radiometric measurements. The experimental results show that the effect of surface roughness is to increase the soils' brightness temperature and to reduce the slope of regression between brightness temperature and moisture content. The slopes of regression for soils with different textures are found to be comparable, and the effect of soil texture is reflected in the difference of regression line intercepts at brightness temperature axis. The result is consistent with laboratory measurement of soils' dielectric permittivity. Measurements on wet smooth bare fields give lower brightness temperatures at 5 GHz than at 1.4 GHz. Previously announced in STAR as N82-24550

Wang, J. R.↗

NASA NTRS1985

Effects of soil tillage on the microwave emission of soils

In order to understand the interactions of soil properties and microwave emission better, a series of field experiments were conducted in 1984. Small plots were measured with a truck-mounted passive microwave radiometer operating at 1.4 GHz. These data were collected concurrent with ground observations of soil moisture and bulk density. Treatment effects studied included different soil moisture contents and bulk densities. Evaluations of the data have shown that commonly used models of the dielectric properties of wet soils do not explain the observations obtained in these experiments. This conclusion was based on the fact that the roughness parameters determined through optimization were significantly larger than those observed in similar investigations. These discrepancies are most likely due to the soil structure. Commonly used models assume a homogeneous three phase mixture of soil solids, air and water. Under tilled conditions the soil is actually a two phase mixture of aggregates and voids. Appropriate dielectric models for this tilled condition were evaluated and found to explain the observations. These results indicate that previous conclusions concerning the effects of surface roughness in tilled fields may be incorrect, and they may explain some of the inconsistencies encountered in roughness modeling.

Jackson, T. J.↗

NASA NTRS1973

Evaluation of effectiveness of various devices for attenuation of trailing vortices based on model tests in a large towing basin

The effectiveness of various candidate aircraft-wing devices for attenuation of trailing vortices generated by large aircraft is evaluated on basis of results of experiments conducted with a 0.03-scale model of a Boeing 747 transport aircraft using a technique developed at the HYDRONAUTICS Ship Model Basin. Emphasis is on the effects produced by these devices in the far-field (up to 8 kilometers downstream of full-scale generating aircraft) where the unaltered vortex-wakes could still be hazardous to small following aircraft. The evaluation is based primarily on quantitative measurements of the respective vortex velocity distributions made by means of hot-film probe traverses in a transverse plane at selected stations downstream. The effects of these altered wakes on rolling moment induced on a small following aircraft are also studied using a modified lifting-surface theory with a synthesized Gates Learjet as a typical example. Lift and drag measurements concurrently obtained in the model tests are used to appraise the effects of each device investigated on the performance characteristics of the generating aircraft.

Kirkman, K. L.↗

NASA NTRS1990

Effects of stick dynamics on helicopter flying qualities

An experiment that investigated the influence of typical helicopter force-feel system dynamics on roll-axis handling qualities was conducted in concurrent ground and inflight simulations. Variations in lateral control natural frequency and damping ratio, effected by changes in inertia and damping, were evaluated in a disturbance-rejection task. Pilot ratings indicated a preference for low-inertia feel systems, although measured performance was relatively constant over the range of stick characteristics. Force-sensing was compared with position sensing as the input to the control system. Force-sensing improved performance but did not improve pilot ratings. Overall, the results indicated that control-stick dynamics, at least within a reasonable range, did not have a significant effect on pilot-vehicle performance. However, the physical effort required to maintain a desired pilot/manipulator bandwidth became objectionable as the stick inertia increased beyond 5-7 lbm, which was reflected in the pilot ratings and comments.

Watson, Douglas C.↗

NASA NTRS1998

Residual Stresses Modeled in Thermal Barrier Coatings

Thermal barrier coating (TBC) applications continue to increase as the need for greater engine efficiency in aircraft and land-based gas turbines increases. However, durability and reliability issues limit the benefits that can be derived from TBC's. A thorough understanding of the mechanisms that cause TBC failure is a key to increasing, as well as predicting, TBC durability. Oxidation of the bond coat has been repeatedly identified as one of the major factors affecting the durability of the ceramic top coat during service. However, the mechanisms by which oxidation facilitates TBC failure are poorly understood and require further characterization. In addition, researchers have suspected that other bond coat and top coat factors might influence TBC thermal fatigue life, both separately and through interactions with the mechanism of oxidation. These other factors include the bond coat coefficient of thermal expansion, the bond coat roughness, and the creep behavior of both the ceramic and bond coat layers. Although it is difficult to design an experiment to examine these factors unambiguously, it is possible to design a computer modeling "experiment" to examine the action and interaction of these factors, as well as to determine failure drivers for TBC's. Previous computer models have examined some of these factors separately to determine their effect on coating residual stresses, but none have examined all the factors concurrently. The purpose of this research, which was performed at DCT, Inc., in contract with the NASA Lewis Research Center, was to develop an inclusive finite element model to characterize the effects of oxidation on the residual stresses within the TBC system during thermal cycling as well as to examine the interaction of oxidation with the other factors affecting TBC life. The plasma sprayed, two-layer thermal barrier coating that was modeled incorporated a superalloy substrate, a NiCrAlY bond coat, and a ZrO2-8 wt % Y2O3 ceramic top coat. We examined the effect on stress during burner rig thermal cycling of the following independent variables: creep in the bond coat and top coat, oxidation, bond coat coefficient of thermal expansion, number of thermal cycles, and interfacial roughness. All these factors were suspected of influencing TBC failure. The model showed that all the material properties studied had a significant effect on the coating's residual stresses if the interface of the bond coat was rough. Bond coat expansion, bond coat oxidation, and bond coat creep had the highest effect on coating stresses, and these were highly interactive. The model also showed that the mechanism of stress generation during thermal cycling changed with the number of thermal cycles. Bond coat and top coat creep dominated stress generation during early thermal cycles, greatly increasing delamination stresses at the peaks of the bond coat. Therefore, creep is the prime driver for delamination cracking early in life, but cracking is limited to the bond coat peak region. Oxidation of the bond coat, on the other hand, tended to dominate stress generation during later cycles by greatly increasing delamination stresses over bond coat valleys. These results indicate that oxidation is the driver for the continued cracking necessary to cause ceramic layer spallation.

Freborg, A. M.↗

NASA NTRSDate not supplied

Simultaneous Trajectory Tracking Control and Online Mass Estimation for a Regolith Excavating Robot via Integral Concurrent Learning

An adaptive controller is developed for a regolith excavation robot to determine the mass of excavated material and to account for the effects of gravity and friction while on the surface of other celestial bodies. A data-based integral concurrent learning (ICL) parameter update law accounts for and estimates the unknown mass, gravity, and friction parameters. A Lyapunov-based analysis proves that the trajectory tracking error and the parameter estimate errors exponentially converge to zero. An estimation of the mass of regolith excavated by the robot is calculated from the estimated parameters. A simulation study is performed to show the performance of the developed technique. Simulation results show that for 3 kilograms of excavated material, the mass estimate has an error of 4.9 grams.

Max L. Greene↗

NASA NTRS1980

An assessment of future computer system needs for large-scale computation

Data ranging from specific computer capability requirements to opinions about the desirability of a national computer facility are summarized. It is concluded that considerable attention should be given to improving the user-machine interface. Otherwise, increased computer power may not improve the overall effectiveness of the machine user. Significant improvement in throughput requires highly concurrent systems plus the willingness of the user community to develop problem solutions for that kind of architecture. An unanticipated result was the expression of need for an on-going cross-disciplinary users group/forum in order to share experiences and to more effectively communicate needs to the manufacturers.

Lykos, P.↗