Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Class VI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Ab Initio Study of Structural, Electronic, and Magnetic Properties of A{sub 1−x}{sup III}Mn{sub x}B{sup VI}: In{sub 1−x}Mn{sub x}S-Diluted Magnetic Semiconductor

First-principles density functional calculations on the new class of diluted magnetic semiconductor A{sub 1−x}{sup III}Mn{sub x}B{sup VI} In{sub 1−x}Mn{sub x}S for x = 0.25 and 0.5 are investigated to study the structural, electronic, and magnetic properties, employing the full-potential linearized augmented plane wave method. Electronic band structures and density of states revealed a half-metallic character of In{sub 1−x}Mn{sub x}S and show the stability of anti-ferromagnetic states as compared with ferromagnetic states. The calculated exchange constants J{sub dd} are in good agreement with experimental and theoretical results on magnetic properties of single crystalline A{sub 1−x}{sup III}Mn{sub x}B{sup VI} in the anti-ferromagnetic case. Our predicated calculations on the s,p-d exchange constants N{sub 0}α and N{sub 0}β show that they are lower than in A{sub 1−x}{sup II}Mn{sub x}B{sup VI} DMS. The local environment is found tetrahedral as in the II–VI DMS and other (III,Mn) VI compounds. The total magnetic moment for In{sub 1−x}Mn{sub x}S for different concentrations is in accordance with the exact value 5 μ{sub B} and comes mainly from impurity Mn. The local magnetic moments of Mn ions are reduced from their free space charges values due to the p-d hybridization which produces small magnetic moments on the nonmagnetic In and S sites. The Curie temperature of In{sub 1−x}Mn{sub x}S is calculated within the mean field approximation and compared with other DMS systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

O VI ABSORBERS TRACING HOT GAS ASSOCIATED WITH A PAIR OF GALAXIES AT z = 0.167

High signal-to-noise observations of the QSO PKS 0405-123 (z {sub em} = 0.572) with the Cosmic Origins Spectrograph from 1134 to 1796 A with a resolution of {approx}17 km s{sup -1} are used to study the multi-phase partial Lyman limit system (LLS) at z = 0.16716, which has previously been studied using relatively low signal-to-noise spectra from STIS and FUSE. The LLS and an associated H I-free broad O VI absorber likely originate in the circumgalactic gas associated with a pair of galaxies at z = 0.1688 and 0.1670 with impact parameters of 116 h {sup -1} {sub 70} and 99 h {sup -1} {sub 70}. The broad and symmetric O VI absorption is detected in the z = 0.16716 rest frame with v = -278 {+-} 3 km s{sup -1}, log N(O VI) = 13.90 {+-} 0.03, and b = 52 {+-} 2 km s{sup -1}. This absorber is not detected in H I or other species with the possible exception of N V. The broad, symmetric O VI profile and the absence of corresponding H I absorption indicate that the circumgalactic gas in which the collisionally ionized O VI arises is hot (log T {approx} 5.8-6.2). The absorber may represent a rare but important new class of low-z intergalactic medium absorbers. The LLS has strong asymmetrical O VI absorption with log N(O VI) = 14.72 {+-} 0.02 spanning a velocity range from -200 to +100 km s{sup -1}. The high and low ions in the LLS have properties resembling those found for Galactic highly ionized high-velocity clouds where the O VI is likely produced in the conductive and turbulent interfaces between cool and hot gas.

79 ASTRONOMY AND ASTROPHYSICS↗

Diagnosing and overcoming recombination and resistive losses in non-silicon solar cells using a silicon-inspired characterization platform

This project aimed to generate the characterization tools needed for accurate and systematic loss analysis in non-silicon photovoltaic solar cell technologies and, through the use of these tools and analysis techniques, contribute to the development of a novel class of hetero-contacts to II-VI absorbers, with the final goal of demonstrating record-breaking CdSeTe devices. CdSeTe solar cells provide a prime example of the potential impact of the techniques we proposed to develop and implement: record poly-CdSeTe cells have bandgap-voltage deficits (W oc ) of approximately 550 mV, as compared with below 400 mV for all other mature PV technologies. Similarly, these record CdSeTe devices have FFs below 80%, when other mature cells are near or above 85%. Frustratingly, a systematic identification of the origin of these sub-par performances—for example recombination or resistive losses—has been lacking, thus slowing down the development of these technologies. Similarly, it is often asserted that CdSeTe cells need a better back (hole) contact. Although most believe this is true, no one knew—at the start of this project—how high the V oc and FF could be for a given cell if it had a perfect back contact. Such characterization techniques and loss analysis methods exist and are routinely performed on c-Si solar cells (e.g. injection-dependent lifetime, Suns-V oc , transfer length method, etc). Over the years, they have been instrumental in the development of silicon devices that operate at 91% of their theoretical (Auger) limit. Lifetime testing, and the associated reconstruction of the implied-J-V curve, can moreover be performed at every cell-processing step, thus allowing a direct peek into the impact of that step on cell performance. Therefore, adapting these techniques and tools to non-Si devices would greatly improve their learning rate. In this project, we developed a Suns-ERE technique—the equipment, methodology, and know-how—to measure the implied-J-V curve, the pseudo-J-V curve, and the actual J-V curve of a thin-film solar cell, allowing an accurate assessment of the quality of the bulk material and its surface passivation, the selectivity of the contact, and its resistivity. We used this technique to show that the absorber of present CdSeTe solar cells is capable of achieving 1 V Voc,, that passivation layers exist (e.g., Al2O3) that can support such high voltages, and that the barrier is identifying contact layers that are both passivating and carrier-selective. The characterization platform created in this project and the understanding generated using it will accelerate the progress of non-silicon PV technologies. In particular, the project will contribute to CdSeTe solar cells with Voc > 1 V and cell efficiency > 24%. Such cells provide a pathway to module-level efficiencies >23%. As CdSeTe presently competes with silicon on module cost (in $\$ $/W) and yet has significantly more room for efficiency gains, the potential for LCOE reduction is particularly large. For example, CdTe modules with an efficiency of 21% would allow an LCOE below $\$ $0.04kWh -1 in average US climates.

14 SOLAR ENERGY↗

Real-time sensing of bioaerosols: Review and current perspectives

Detection of bioaerosols, or primary biological aerosol particles (PBAPs), has become increasingly important for a wide variety of research communities and scientific questions. In particular, real-time (RT) techniques for autonomous, online detection and characterization of PBAP properties in both outdoor and indoor environments are becoming more commonplace and have opened avenues of research. With advances in technology, however, come challenges to standardize practices so that results are both reliable and comparable across technologies and users. Here, we present a critical review of major RT instrument classes that have been applied to PBAP research, especially with respect to environmental science, allergy monitoring, agriculture, public health, and national security. Eight major classes of RT techniques are covered, including the following: (i) fluorescence spectroscopy, (ii) elastic scattering, microscopy, and holography, (iii) Raman spectroscopy, (iv) mass spectrometry, (v) breakdown spectroscopy, (vi) remote sensing, (vii) microfluidic techniques, and (viii) paired aqueous techniques. For each class of technology we present technical limitations, misconceptions, and pitfalls, and also summarize best practices for operation, analysis, and reporting. The final section of the article presents pressing scientific questions and grand challenges for RT sensing of PBAP as well as recommendations for future work to encourage high-quality results and increased cross-community collaboration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability analysis of inflation with an SU(2) gauge field

We study anisotropic cosmologies of a scalar field interacting with an SU(2) gauge field via a gauge-kinetic coupling. We analyze Bianchi class A models, which include Bianchi type I, II, VI{sub 0}, VII{sub 0}, VIII and IX. The linear stability of isotropic inflationary solution with background magnetic field is shown, which generalizes the known results for U(1) gauge fields. We also study anisotropic inflationary solutions, all of which turn out to be unstable. Then nonlinear stability for the isotropic inflationary solution is examined by numerically investigating the dependence of the late-time behaviour on the initial conditions. We present a number of novel features that may well affect physical predictions and viability of the models. First, in the absence of spatial curvature, strong initial anisotropy leads to a rapid oscillation of gauge field, thwarting convergence to the inflationary attractor. Secondly, the inclusion of spatial curvature destabilizes the oscillatory attractor and the global stability of the isotropic inflation with gauge field is restored. Finally, based on the numerical evidence combined with the knowledge of the eigenvalues for various inflationary solutions, we give a generic lower-bound for the duration of transient anisotropic inflation, which is inversely proportional to the slow-roll parameter.

79 ASTRONOMY AND ASTROPHYSICS↗

Absorption-line detections of 10{sup 5}-10{sup 6} K gas in spiral-rich groups of galaxies

Using the Cosmic Origins Spectrograph (COS) on the Hubble Space Telescope, the COS Science Team has conducted a high signal-to-noise survey of 14 bright QSOs. In a previous paper, these far-UV spectra were used to discover 14 'warm' (T ≥ 10{sup 5} K) absorbers using a combination of broad Lyα and broad O VI absorptions. A reanalysis of a few of this new class of absorbers using slightly relaxed fitting criteria finds as many as 20 warm absorbers could be present in this sample. A shallow, wide spectroscopic galaxy redshift survey has been conducted around these sight lines to investigate the warm absorber environment, which is found to be spiral-rich groups or cluster outskirts with radial velocity dispersions σ = 250-750 km s{sup –1}. While 2σ evidence is presented favoring the hypothesis that these absorptions are associated with the galaxy groups and not with the individual, nearest galaxies, this evidence has considerable systematic uncertainties and is based on a small sample size so it is not entirely conclusive. If the associations are with galaxy groups, the observed frequency of warm absorbers (dN/dz = 3.5-5 per unit redshift) requires them to be very extended as an ensemble on the sky (∼1 Mpc in radius at high covering factor). Most likely these warm absorbers are interface gas clouds whose presence implies the existence of a hotter (T ∼ 10{sup 6.5} K), diffuse, and probably very massive (>10{sup 11} M {sub ☉}) intra-group medium which has yet to be detected directly.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterisation of organic-inorganic hybrid materials of the types ZnxCd1-xSe(1,3-diaminopropane)1/2 and ZnSySe1-y(1,3-diaminopropane)1/2

Highlights: • New hybrid materials: Zn{sub x}Cd{sub 1-x}Se(1,3-DAP){sub 1/2} and ZnS{sub x}Se{sub 1-x}(1,3-DAP){sub 1/2} were obtained. • Hybrids were studied using XRD, TG/DSC, XRD vs. temperature, SEM, UV–vis spectroscopy. • The impact of the composition of the layers on optical properties were studied. - Abstract: Organic-inorganic hybrid materials of the type MeQ(diamine){sub 1/2} (where Me–Zn, Cd, Mn and Q–S, Se, Te) belong to the class of 3D nanomaterials. They are built of layers of II–VI semiconductors and amines, which act as linkers. The main goal of our work was the synthesis of compounds of the type Zn{sub x}Cd{sub 1-x}Se(1,3-diaminopropane){sub 1/2} and ZnS{sub y}Se{sub 1-y}(1,3-diaminopropane){sub 1/2} (where x, y = 0, 0.25, 0.5, 0.75, 1) and the study of properties changed by the composition of the semiconducting layers. Analysis of these materials was carried out with the use of X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), simultaneous thermogravimetry and differential scanning calorimetry (TG-DSC) as well as temperature dependent XRPD enabled us to obtain information about the thermal stability of hybrid compounds with mixed semiconducting layers. Another important part of our work was a study, performed with the use of UV–vis spectroscopy, of the optical properties of these materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

OPTICAL SPECTROSCOPIC OBSERVATIONS OF GAMMA-RAY BLAZAR CANDIDATES. VI. FURTHER OBSERVATIONS FROM TNG, WHT, OAN, SOAR, AND MAGELLAN TELESCOPES

Blazars, one of the most extreme classes of active galaxies, constitute so far the largest known population of γ-ray sources, and their number is continuously growing in the Fermi catalogs. However, in the latest release of the Fermi catalog there is still a large fraction of sources that are classified as blazar candidates of uncertain type (BCUs) for which optical spectroscopic observations are necessary to confirm their nature and their associations. In addition, about one-third of the γ-ray point sources listed in the Third Fermi-LAT Source Catalog (3FGL) are still unassociated and lacking an assigned lower-energy counterpart. Since 2012 we have been carrying out an optical spectroscopic campaign to observe blazar candidates to confirm their nature. In this paper, the sixth of the series, we present optical spectroscopic observations for 30 γ-ray blazar candidates from different observing programs we carried out with the Telescopio Nazionale Galileo, William Herschel Telescope, Observatorio Astronómico Nacional, Southern Astrophysical Research Telescope, and Magellan Telescopes. We found that 21 out of 30 sources investigated are BL Lac objects, while the remaining targets are classified as flat-spectrum radio quasars showing the typical broad emission lines of normal quasi-stellar objects. We conclude that our selection of γ-ray blazar candidates based on their multifrequency properties continues to be a successful way to discover potential low-energy counterparts of the Fermi unidentified gamma-ray sources and to confirm the nature of BCUs.

79 ASTRONOMY AND ASTROPHYSICS↗

Soluble semiconductors AAsSe{sub 2} (A = Li, Na) with a direct-band-gap and strong second harmonic generation : a combined experimental and theoretical study.

AAsSe{sub 2} (A = Li, Na) have been identified as a new class of polar direct-band gap semiconductors. These I-V-VI{sub 2} ternary alkali-metal chalcoarsenates have infinite single chains of (1/{infinity})[AsQ{sub 2}{sup -}] derived from corner-sharing pyramidal AsQ{sup 3} units with stereochemically active lone pairs of electrons on arsenic. The conformations and packing of the chains depend on the structure-directing alkali metals. This results in at least four different structural types for the Li1-xNaxAsSe{sub 2} stoichoimetry ({alpha}-LiAsSe{sub 2}, {beta}-LiAsSe{sub 2}, {gamma}-NaAsSe{sub 2}, and {delta}-NaAsSe{sub 2}). Single-crystal X-ray diffraction studies showed an average cubic NaCl-type structure for {alpha}-LiAsSe{sub 2}, which was further demonstrated to be locally distorted by pair distribution function (PDF) analysis. The {beta} and {gamma} forms have polar structures built of different (1/{infinity})[AsSe{sub 2}{sup -}] chain conformations, whereas the {delta} form has nonpolar packing. A wide range of direct band gaps are observed, depending on composition: namely, 1.11 eV for {alpha}-LiAsSe{sub 2}, 1.60 eV for LiAsS{sub 2}, 1.75 eV for {gamma}-NaAsSe{sub 2}, 2.23 eV for NaAsS{sub 2}. The AAsQ{sub 2} materials are soluble in common solvents such as methanol, which makes them promising candidates for solution processing. Band structure calculations performed with the highly precise screened-exchange sX-LDA FLAPW method confirm the direct-gap nature and agree well with experiment. The polar {gamma}-NaAsSe{sub 2} shows very large nonlinear optical (NLO) second harmonic generation (SHG) response in the wavelength range of 600-950 nm. The theoretical studies confirm the experimental results and show that {gamma}-NaAsSe{sub 2} has the highest static SHG coefficient known to date, 337.9 pm/V, among materials with band gaps larger than 1.0 eV.

10 SYNTHETIC FUELS↗

Intermediate-state-trapped mutants pinpoint G protein-coupled receptor conformational allostery

Understanding the roles of intermediate states in signaling is pivotal to unraveling the activation processes of G protein-coupled receptors (GPCRs). However, the field is still struggling to define these conformational states with sufficient resolution to study their individual functions. Here, we demonstrate the feasibility of enriching the populations of discrete states via conformation-biased mutants. These mutants adopt distinct distributions among five states that lie along the activation pathway of adenosine A 2A receptor (A 2A R), a class A GPCR. Our study reveals a structurally conserved cation-π lock between transmembrane helix VI (TM6) and Helix8 that regulates cytoplasmic cavity opening as a “gatekeeper” for G protein penetration. A GPCR activation process based on the well-discerned conformational states is thus proposed, allosterically micro-modulated by the cation-π lock and a previously well-defined ionic interaction between TM3 and TM6. Intermediate-state-trapped mutants will also provide useful information in relation to receptor-G protein signal transduction.

59 BASIC BIOLOGICAL SCIENCES↗

Traditional Semiconductors in the Two-Dimensional Limit

Interest in two-dimensional materials has exploded in recent years. Not only are they studied due to their novel electronic properties, such as the emergent Dirac fermion in graphene, but also as a new paradigm in which stacking layers of distinct two-dimensional materials may enable different functionality or devices. Here, through first-principles theory, we reveal a large new class of two-dimensional materials which are derived from traditional III-V, II-VI, and I-VII semiconductors. It is found that in the ultrathin limit the great majority of traditional binary semiconductors studied (a series of 28 semiconductors) are not only kinetically stable in a two-dimensional double layer honeycomb structure, but more energetically stable than the truncated wurtzite or zinc-blende structures associated with three dimensional bulk. These findings both greatly increase the landscape of two-dimensional materials and also demonstrate that in the double layer honeycomb form, even ordinary semiconductors, such as GaAs, can exhibit exotic topological properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New Class of Electrocatalysts Based on 2D Transition Metal Dichalcogenides in Ionic Liquid

The optimization of traditional electrocatalysts has reached a point where progress is impeded by fundamental physical factors including inherent scaling relations among thermokinetic characteristics of different elementary reaction steps, non-Nernstian behavior, and electronic structure of the catalyst. This suggests that the currently utilized classes of electrocatalysts may not be adequate for future needs. Our work reports on synthesis and characterization of a new class of materials based on 2D transition metal dichalcogenides including sulfides, selenides, and tellurides of group V and VI transition metals that exhibit excellent catalytic performance for both oxygen reduction and evolution reactions in an aprotic medium with Li salts. The reaction rates are much higher for these materials than previously reported catalysts for these reactions. The reasons for the high activity are found to be the metal edges with adiabatic electron transfer capability and a cocatalyst effect involving an ionic-liquid electrolyte. These new materials are expected to have high activity for other core electrocatalytic reactions and open the way for advances in energy storage and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum dots in nanomedicine: recent trends, advances and unresolved issues

The review addresses the current state of progress in the use of ultra-small nanoparticles from the category of quantum dots (QDs), which presently embraces a widening range of nanomaterials of different nature, including “classical” semiconductor groups III-V and II-VI nanocrystals, along with more recently emerged carbon, silicon, gold and other types of nanoparticles falling into this class of nanomaterials due to their similar physical characteristics such as small size and associated quantum confinement effects. A diverse range of QDs applications in nanomedicine has been extensively summarised previously in numerous publications. Therefore, this review is not intended to provide an all-embracing survey of the well documented QDs uses, but is rather focused on the most recent emerging developments, concepts and outstanding unresolved problematic and sometimes controversial issues. Over 125 publications are overviewed and discussed here in the context of major nanomedicine domains, i.e. medical imaging, diagnostics, therapeutic applications and combination of them in multifunctional theranostic systems. - Highlights: • New types of nanomaterials have been recently added to the category of QDs with a potential in nanomedicine. • Within the main nanomedicine domains, best progress has been achieved with QDs for diagnostic tools. • Further studies are required for the theranostic QDs-based leads to reach clinical translation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and Characterization of Pyridine Dipyrrolide Uranyl Complexes

The first actinide complexes of the pyridine dipyrrolide (PDP) ligand class, ( Mes PDP Ph )UO 2 (THF) and ( Cl2Ph PDP Ph )UO 2 (THF), are reported as the U VI uranyl adducts of the bulky aryl substituted pincers ( Mes PDP Ph ) 2– and ( Cl2Ph PDP Ph ) 2– (derived from 2,6-bis(5-(2,4,6-trimethylphenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine (H 2 Mes PDP Ph , Mes = 2,4,6-trimethylphenyl), and 2,6-bis(5-(2,6-dichlorophenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine (H 2 Cl2Ph PDP Ph , Cl 2 Ph = 2,6-dichlorophenyl), respectively). Following the in situ deprotonation of the proligand with lithium hexamethyldisilazide to generate the corresponding dilithium salts (e.g., Li 2 Ar PDP Ph , Ar = Mes of Cl 2 Ph), salt metathesis with [UO 2 Cl 2 (THF) 2 ] 2 afforded both compounds in moderate yields. The characterization of each species has been undertaken by a combination of solid- and solution-state methods, including combustion analysis, infrared, electronic absorption, and NMR spectroscopies. In both complexes, single-crystal X-ray diffraction has revealed a distorted octahedral geometry in the solid state, enforced by the bite angle of the rigid meridional ( Ar PDP Ph ) 2– pincer ligand. The electrochemical analysis of both compounds by cyclic voltammetry in tetrahydrofuran (THF) reveals rich redox profiles, including events assigned as U VI /U V redox couples. Here, a time-dependent density functional theory study has been performed on ( Mes PDP Ph )UO 2 (THF) and provides insight into the nature of the transitions that comprise its electronic absorption spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonisovalent Si-III-V and Si-II-VI alloys: Covalent, ionic, and mixed phases

In this paper, nonequilibrium growth of Si-III-V or Si-II-VI alloys is a promising approach to obtaining optically more active Si-based materials. We propose a new class of nonisovalent Si 2 AlP (or Si 2 ZnS) alloys in which the Al-P (or Zn-S) atomic chains are as densely packed as possible in the host Si matrix. As a hybrid of the lattice-matched parent phases, Si2AlP (or Si2ZnS) provides an ideal material system with tunable local chemical orders around Si atoms within the same composition and structural motif. Here, using first-principles hybrid functional calculations, we discuss how the local chemical orders affect the electronic and optical properties of the nonisovalent alloys.

14 SOLAR ENERGY↗

Electronic Structure and Stability of Quaternary Chalcogenide Semiconductors Derived from Cation Cross-Substitution of II-VI and I-III-VI2 Compounds

Sequential cation cross-substitution in zinc-blende chalcogenide semiconductors, from binary to ternary to quaternary compounds, is systematically studied using first-principles electronic structure calculations. Several universal trends are found for the ternary and two classes of quaternary chalcogenides, for example, the lowest-energy structure always has larger lattice constant a, smaller tetragonal distortion parameter {eta} = c/2a, negative crystal-field splitting at the top of the valence band, and larger band gap compared to the metastable structures for common-row cation substitution. The band structure changes in the cation substitution are analyzed in terms of the band offsets and band character decomposition, showing that although the band gap decreases from binary II-VI to ternary I-III-VI{sub 2} are mostly due to the p-d repulsion in the valence band, the decreases from ternary I-III-VI{sub 2} to quaternary I{sub 2}-II-IV-VI{sub 4} chalcogenides are due to the downshift in the conduction band caused by the wave-function localization on the group IV cation site. We propose that common-row-cation I{sub 2}-II-IV-VI{sub 4} compounds are more stable in the kesterite structure, whereas the widely assumed stannite structure reported in the literature for experimental samples is most likely due to partial disorder in the I-II (001) layer of the kesterite phase.

36 MATERIALS SCIENCE↗