Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CdC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

The NASTRAN computer program for structural analysis.

Discussion of a large NASA-sponsored digital computer program for static and dynamic analysis of structures with linear or nonlinear material properties. The program fits to perform buckling analysis, vibration mode analysis of conservative or damped systems, frequency response analysis, and transient response analysis on the IBM 360, UNIVAC 1108, and CDC 6600 computers. It also provides automatic generation of several types of loads such as gravity loads and thermal strain loads, plots of deformed and nondeformed structures, and the choice of alternate analysis methods such as direct or modal formulations of dynamic problems. The program is intended primarily for large problems involving hundreds of thousands of degrees of freedom. A flexible Executive System is provided to facilitate the addition of new functional capabilities to the program.

Macneal, R. H.↗
NASA NTRS1973

Characteristics of FORTRAN

Publication is announced which outlines source program differences between IBM 360, UNIVAC 1108, CDC 6000, and Honeywell Series 32 computer systems. Publication can be guide to programmer in converting existing program from one computer system to another.

Garner, W. R.↗
NASA NTRS1974

Dynamic nonlinear analysis of shells of revolution (DYNASOR II)

Equations of motion of shell are solved using Houbolt's numerical procedure with nonlinear terms being moved to right-hand side of equilibrium equations and treated as generalized loads. Program was written in FORTRAN IV for IBM 360 or CDC 6000 series computers.

Tillerson, J. R.↗
NASA NTRS1972

Optimization of thermal protection systems for the space vehicle. Volume 2: User's manual

The development of the computational techniques for the design optimization of thermal protection systems for the space shuttle vehicle are discussed. The resulting computer program was then used to perform initial optimization and sensitivity studies on a typical thermal protection system (TPS) to demonstrate its application to the space shuttle TPS design. The program was developed in FORTRAN IV for CDC 6400 computer, but it was subsequently converted to the FORTRAN V language to be used on the Univac 1108.

Source record↗
NASA NTRS1972

Optimization of thermal protection systems for the space shuttle vehicle. Volume 1: Final report

A study performed to continue development of computational techniques for the Space Shuttle Thermal Protection System is reported. The resulting computer code was used to perform some additional optimization studies on several TPS configurations. The program was developed in Fortran 4 for the CDC 6400, and it was converted to Fortran 5 to be used for the Univac 1108. The computational methodology is developed in modular fashion to facilitate changes and updating of the techniques and to allow overlaying the computer code to fit into approximately 131,000 octal words of core storage. The program logic involves subroutines which handle input and output of information between computer and user, thermodynamic stress, dynamic, and weight/estimate analyses of a variety of panel configurations. These include metallic, ablative, RSI (with and without an underlying phase change material), and a thermodynamic analysis only of carbon-carbon systems applied to the leading edge and flat cover panels. Two different thermodynamic analyses are used. The first is a two-dimensional, explicit precedure with variable time steps which is used to describe the behavior of metallic and carbon-carbon leading edges. The second is a one-dimensional implicity technique used to predict temperature in the charring ablator and the noncharring RSI. The latter analysis is performed simply by suppressing the chemical reactions and pyrolysis of the TPS material.

Source record↗
NASA NTRS1973

Remote haze monitoring by satellite: A study to demonstrate the feasibility and determine the optimum method

The author has identified the following significant results. A general purpose flexible computer program for the analysis of ERTS MSS data has been written for the Control Data 7600 computer. By putting all of the analysis operations into a separate subroutine the user may concentrate on the analysis. The problems of getting the information into the computer in convenient format is solved once and need not be tampered with each time a new analysis procedure is desired. The problems of getting information written by the XDS computers in 8 bit byte format into a convenient format for analysis on the 60 bit word format CDC 7600 computer are not trivial. A general purpose program to accomplish this has been written and is available from the investigators upon request.

Rogers, E. H.↗
NASA NTRS1972

Study of the dynamics of orbital assemblies including interactions with geometrical appendages

Computer programs are provided for the simulation of a unified flexible spacecraft relative to the dynamics of orbital assemblies, including interactions with geometrical appendages. The CDC 6500 and Univac 1108 computers are used with FORTRAN. The software and hardware requirements are described and diagrammed, as well as the overall deck set-up. A list of standard and nonstandard routines is also included.

Hull, G.↗
NASA NTRS1973

Approximate thermochemical tables for some C-H and C-H-O species

Approximate thermochemical tables are presented for some C-H and C-H-O species and for some ionized species, supplementing the JANAF Thermochemical Tables for application to finite-chemical-kinetics calculations. The approximate tables were prepared by interpolation and extrapolation of limited available data, especially by interpolations over chemical families of species. Original estimations have been smoothed by use of a modification for the CDC-6600 computer of the Lewis Research Center PACl Program which was originally prepared for the IBM-7094 computer Summary graphs for various families show reasonably consistent curvefit values, anchored by properties of existing species in the JANAF tables.

Bahn, G. S.↗
NASA NTRS1973

The VISC code: A user's manual

The VISC code is a computer automated scheme for solving the equations describing the fully coupled viscous, radiating flow at the stagnation-point of a blunt body which may or may not be ablating. The code provides a basis for obtaining prediction of the stagnation-point heating to a body entering any planetary atmosphere at hyperbolic velocities. The code is written in FORTRAN V and is operational on both the Univac 1108 (EXEC 8) system and the CDC 7600 system. The report gives an overview of the VISC code computational logic flow, a description of the input requirements and output results and comments on the practical use of the code. As such the report forms a users manual for operation of the VISC code.

Wilson, K.↗
NASA NTRS1973

SL4 code - A user's manual

The SL-4 code is a computer automated scheme for solving the equations describing the fully-coupled viscous, radiating flow over the front face of a blunt body which may or may not be ablating. The code provides a basis for obtaining predictions of the surface beating to a body entering any planetary atmosphere at hyperbolic velocities. The code is written in FORTRAN V and is operational on both the Univac 1108 (EXEC 8) system in use at LMSC and the CDC 7600 system in use at the University of California, Berkeley. An overview of the SL-4 code computational logic flow, a description of the input requirements and output results, and comments on the practical use of the code are presented. As such this report forms a users manual for operation of the SL-4 code.

Chou, Y. S.↗
NASA NTRS1973

An analytical study for the design of advanced rotor airfoils

A theoretical study has been conducted to design and evaluate two airfoils for helicopter rotors. The best basic shape, designed with a transonic hodograph design method, was modified to meet subsonic criteria. One airfoil had an additional constraint for low pitching-moment at the transonic design point. Airfoil characteristics were predicted. Results of a comparative analysis of helicopter performance indicate that the new airfoils will produce reduced rotor power requirements compared to the NACA 0012. The hodograph design method, written in CDC Algol, is listed and described.

Kemp, L. D.↗
NASA NTRS1973

User manual for Streamtube Curvature Analysis: Analytical method for predicting the pressure distribution about a nacelle at transonic speeds, appendix

The computer program listing of Streamtube Curvature Analysis is presented. The listing includes explanatory statements and titles so that the program flow is readily discernable. The computer program listing is in CDC FORTRAN 2.3 source language form, except for three subroutines, GETIX, GETRLX, and SAVIX, which are in COMPOSE 1.1 language.

Keith, J. S.↗
NASA NTRS1972

NERVA dynamic analysis methodology, SPRVIB

The general dynamic computer code called SPRVIB (Spring Vib) developed in support of the NERVA (nuclear engine for rocket vehicle application) program is described. Using normal mode techniques, the program computes kinematical responses of a structure caused by various combinations of harmonic and elliptic forcing functions or base excitations. Provision is made for a graphical type of force or base excitation input to the structure. A description of the required input format and a listing of the program are presented, along with several examples illustrating the use of the program. SPRVIB is written in FORTRAN 4 computer language for use on the CDC 6600 or the IBM 360/75 computers.

Vronay, D. F.↗
NASA NTRS1973

DIALOG: An executive computer program for linking independent programs

A very large scale computer programming procedure called the DIALOG executive system was developed for the CDC 6000 series computers. The executive computer program, DIALOG, controls the sequence of execution and data management function for a library of independent computer programs. Communication of common information is accomplished by DIALOG through a dynamically constructed and maintained data base of common information. Each computer program maintains its individual identity and is unaware of its contribution to the large scale program. This feature makes any computer program a candidate for use with the DIALOG executive system. The installation and uses of the DIALOG executive system are described.

Glatt, C. R.↗