Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Carbon support”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Development of the electrochemically regenerable carbon dioxide absorber for portable life support system application

As the length of manned space missions increase, more ambitious extravehicular activities (EVAs) are required. For the projected longer mission the use of expendables in the portable life support system (PLSS) will become prohibited due to high launch weight and volume requirements. Therefore, the development of a regenerable CO2 absorber for the PLSS application is highly desirable. The paper discusses the concept, regeneration mechanism, performance, system design, and absorption/regeneration cycle testing of a most promising concept known as ERCA (Electrochemically Regenerable CO2 Absorber). This concept is based on absorbing CO2 into an alkaline absorbent similar to LiOH. The absorbent is an aqueous solution supported in a porous matrix which can be electrochemically regenerated on board the primary space vehicle. With the metabolic CO2 recovery the ERCA concept results in a totally regenerable CO2 scrubber. The ERCA test hardware has passed 200 absorption/regeneration cycles without performance degradation.

Woods, R. R.↗

Method for making a microporous membrane

A method for making a microporous membrane comprises the steps of: providing a plurality of carbon nanotubes having a hollow interior diameter of 20 Angstroms or less; sonicating the plurality of carbon nanotubes utilizing a solution comprising deionized, distilled water and a surfactant that coats at least one of the plurality of carbon nanotubes; collecting the coated carbon nanotubes; forming a matrix that supports the plurality of carbon nanotubes; embedding the coated carbon nanotubes into the matrix; rinsing the coated nanotubes to remove at least a portion of the surfactant; curing the nanotube-matrix assembly; and cutting the nanotube-matrix assembly to a particular thickness so as to open the ends of the embedded nanotubes. The hollow interiors of the plurality of embedded carbon nanotubes comprise the pores of the microporous membrane.

Gavalas, Lillian Susan↗

First-results from the Perseverance SHERLOC Investigation: Aqueous Alteration Processes and Implications for Organic Geochemistry in Jezero Crater, Mars

The Perseverance rover landed in Jezero crater, a site selected to fulfill the Mars-2020 mission goals of characterizing the geology of habitable environments and searching for signs of life while collecting samples for return to Earth [1]. Jezero hosted an open-basin lake during the late Noachian/early Hesperian (~3.7 Ga) [1-2], has units associated with the largest carbonate deposit identified on Mars [3-4], and has a well-preserved delta with clay and carbonate-bearing sediments, well-suited to preservation of organics [1,3-4]. Investigating the nature of organics and aqueous environments within their geologic con-text allows us to understand important aqueous processes and determine habitability within Jezero crater. Previous in situ landed measurements of organics could not resolve their spatial and mineralogical con-text [5-6]. Although Martian meteorites lack geological context, the spatial distribution of organic compounds in Martian meteorites have allowed recognition of an association between aqueous processes and organics [7-8]. Here, we show for the first time in-situ associations between carbonate-forming ultramafic alteration process, later stage aqueous sulfate and perchlorate formation, and organics on the Martian surface. Methodology and geological context: We use the Perseverance rover’s SHERLOC instrument (Scanning Habitable Environments with Raman and Lumines-ence of Organics and Chemicals), a deep-ultraviolet fluorescence and Raman scattering spectrometer capable of mapping the organic and mineral composition with a spatial resolution of 100 μm resolution to report the presence of organics and aqueously formed minerals at Jezero crater [9]. These spectral detections were compared with co-located images obtained with the autofocus context imager (ACI) and the WATSON camera for textural analysis [9]. As of writing, the Per-severance rover has abraded five targets that were measured with the SHERLOC instrument. The five targets are located in two different orbitally-identified geological units within the floor of Jezero crater; the Crater Floor Fractured Rough unit (CF-Fr) and the Séítah region within the Crater Floor Fractured 1 unit (CF-F1) [10]. In orbital infrared spectroscopic data, the CF-Fr unit is associated with pyroxene spectral signatures and minor alteration, while the Séítah region is associated with olivine and minor Mg-rich carbonates and clays [3-4,10]. Carbonation of ultramafic protolith recorded within Jezero crater: All scans of abraded targets within the Séítah region reveal strong peaks at 1080–1090 cm−1 consistent with carbonate and peak singlets or doublets at 820–840 cm−1 attributed to olivine (Fig. 1), consistent with orbital infrared observations. Our detailed micron-scale petrographic and spectroscopic evidence shows that these carbonates formed through carbonation of an ultramafic protolith. The supporting observations include: (1) Carbonate cation compositions match those of olivine, suggesting mixed Fe- and Mg-olivine gave rise to mixed Fe- and Mg-carbonates, similar to observations of ultramafic systems on Earth and within Martian meteorites [3-4,7-8]. (2) The ob-served carbonates co-occur with hydrated materials, gypsum, and potentially aqueously-formed phases, amorphous silicates and phosphate. (3) The spectral and textural variation of olivine and carbonate dominated zones and olivine-carbonate mixtures within both primary grains and interstitial zones are expected for carbonated ultramafic protoliths. (4) These mineral associations and textures closely resemble those observed within the ALH84001 and Nakhlite meteorites attributed to olivine carbonation on Mars [6-7]. Taken together, micron-scale SHERLOC documentation of these phenomena bridge previous orbital and meteorite observations and demonstrate in-situ regionally extensive (~106 km2) ultramafic alteration resulting in geo-logical deposition of carbonates. Furthermore, we observe that olivine carbonation was involved in preserving and possibly synthesizing organics, which makes this environment potentially habitable, as previously suggested in [1,3-4] (Fig. 1). Late-stage aqueous perchlorate and sulfate in Jezero crater: An abrasion target within the CF-Fr unit contains combinations of high intensity 950-955 cm−1 peaks and minor 1090-1095 cm−1 and 1150-1155 cm−1 peaks that are spectral fits to anhydrous perchlorate (Fig. 1). Some spectra show a combination of 950-955 cm−1 peaks with equally strong 1010-1020 cm−1 peaks, low intensity broad features at 1120 cm−1, and occasional broad 3450 cm−1 hydration (-OH) features, indicating a mixture of Ca-sulfate and perchlorate that is minimally hydrated (Fig. 1). The detections of per-chlorates within Jezero crater differ from previous measurements (e.g. Phoenix lander, Curiosity rover, Tissint meteorite [7,11]) because they are observed to be intimately related to aqueous processes including sulfate formation, they present as a secondary white void-fill occurring within the interior of the rock, and they are found to likely be Na-perchlorate. implications for their formation: Three different types of organics embedded within three different lithologies were observed within the abraded targets. Organics associated with low intensity ~340 nm fluorescence were widespread within targets with no apparent association to particular minerals (Fig. 1). Organics associated with ~305 nm and ~275 nm fluorescence correlated with sulfates within the Bellegarde target in the CF-Fr unit, while organics associated with high intensity ~340 nm fluorescence correlated with carbonate, phosphate, and amorphous silicate mixtures within the Garde target in the Séítah region (Fig. 1). Although assignment of fluorescence signatures to specific organic compounds is not conclusive, ~340 nm fluorescence is generally more consistent with 2-ring aromatic organics, ~275 nm fluorescence is more consistent with 1-ring aromatic organics, and ~305 nm fluorescence can be created by either 2- or 1-ring aromatics [12]. These observations indicate that the strongest fluorescence signatures interpreted as organics were found in materials associated with aqueous processes, i.e. sulfate- and carbonate-bearing materials, suggesting both brines and ultramafic carbonation aqueous environments were capable of preserving organics on ancient Mars. In Martian meteorites, simple aromatic organics proposed to have been synthesized through aqueous processes can be found within minerals associated with olivine carbonation and in spatial association with perchlorate and sulfate materials [7-8], similar to SHERLOC observations. Hence, we advance an abiotic aqueous synthesis origin for the organics although we cannot rule out the presence of organics from meteoritic in-fall or putative organic biosignatures. Detailed analyses will be required upon return of these materials to Earth.

E L Scheller↗

Stabilizing platinum in phosphoric acid fuel cells

The cathode of the phosphoric acid fuel cell uses a high surface area platinum catalyst supported on a carbon substrate. During operation, the small platinum crystallites sinter, causing loss in cell performance. A support was developed that stabilizes platinum in the high surface area condition by retarding or preventing the sintering process. The approach is to form etch pits in the carbon by oxidizing the carbon in the presence of a metal oxide catalyst, remove the metal oxide by an acid wash, and then deposit platinum in these pits. Results confirm the formation of etch pits in each of the three supports chosen for investigation: Vulcan XC-72R, Vulcan XC-72 that was graphized at 2500 C, and Shawinigan Acetylene Black.

Remick, R. J.↗

Investigating Uncertainty in Predicting Carbon Dynamics in North American Biomes: Putting Support-Effect Bias in Perspective

A fundamental strategy in NASA's Earth Observing System's (EOS) monitoring of vegetation and its contribution to the global carbon cycle is to rely on deterministic, process-based ecosystem models to make predictions of carbon flux over large regions. These models are parameterized (that is, the input variables are derived) using remotely sensed images such as those from the Moderate Resolution Imaging Spectroradiometer (MODIS), ground measurements and interpolated maps. Since early applications of these models, investigators have noted that results depend partly on the spatial support of the input variables. In general, the larger the support of the input data, the greater the chance that the effects of important components of the ecosystem will be averaged out. A review of previous work shows that using large supports can cause either positive or negative bias in carbon flux predictions. To put the magnitude and direction of these biases in perspective, we must quantify the range of uncertainty on our best measurements of carbon-related variables made on equivalent areas. In other words, support-effect bias should be placed in the context of prediction uncertainty from other sources. If the range of uncertainty at the smallest support is less than the support-effect bias, more research emphasis should probably be placed on support sizes that are intermediate between those of field measurements and MODIS. If the uncertainty range at the smallest support is larger than the support-effect bias, the accuracy of MODIS-based predictions will be difficult to quantify and more emphasis should be placed on field-scale characterization and sampling. This talk will describe methods to address these issues using a field measurement campaign in North America and "upscaling" using geostatistical estimation and simulation.

Dungan, Jennifer L.↗

Preparation and analysis of particulate metal deposits

Small particles and clusters of palladium were grown by deposition from the vapor phase under ultrahigh vacuum conditions. Amorphous and crystalline support films of Al2O3 and ultrathin amorphous carbon films were used as substrate materials. The growth of the metal deposit was monitored in situ by scanning transmission diffraction of energy-filtered 100 kV electrons and high resolution transmission electron microscopy (TEM) analysis was performed in a separate instrument. It was established by in situ TEM, however, that the transfer of specimens in this case did not unduly affect the size and distribution of deposit particles. It was found that the cleanness, stoichiometry, crystallinity and structural perfection of the support surface play an essential role in determining the crystalline perfection and structure of the particles. The smallest palladium clusters reproducibly prepared contained not more than six atoms but size determinations below 1 nm average particle diameter are very problematic with conventional TEM. Palladium particles grown on carbon supports feature an impurity-stabilized mosaic structure.

Poppa, H.↗

Carbon dioxide electrolysis with solid oxide electrolyte cells for oxygen recovery in life support systems

The direct electrochemical reduction of carbon dioxide (CO2) is achieved without catalysts and at sufficiently high temperatures to avoid carbon formation. The tubular electrolysis cell consists of thin layers of anode, electrolyte, cathode and cell interconnection. The electrolyte is made from yttria-stabilized zirconia which is an oxygen ion conductor at elevated temperatures. Anode and cell interconnection materials are complex oxides and are electronic conductors. The cathode material is a composite metal-ceramic structure. Cell performance characteristics have been determined using varying feed gas compositions and degrees of electrochemical decomposition. Cell test data are used to project the performance of a three-person CO2-electrolysis breadboard system.

Isenberg, Arnold O.↗

A simple, mass balance model of carbon flow in a controlled ecological life support system

Internal cycling of chemical elements is a fundamental aspect of a Controlled Ecological Life Support System (CELSS). Mathematical models are useful tools for evaluating fluxes and reservoirs of elements associated with potential CELSS configurations. A simple mass balance model of carbon flow in CELSS was developed based on data from the CELSS Breadboard project at Kennedy Space Center. All carbon reservoirs and fluxes were calculated based on steady state conditions and modelled using linear, donor-controlled transfer coefficients. The linear expression of photosynthetic flux was replaced with Michaelis-Menten kinetics based on dynamical analysis of the model which found that the latter produced more adequate model output. Sensitivity analysis of the model indicated that accurate determination of the maximum rate of gross primary production is critical to the development of an accurate model of carbon flow. Atmospheric carbon dioxide was particularly sensitive to changes in photosynthetic rate. The small reservoir of CO2 relative to large CO2 fluxes increases the potential for volatility in CO2 concentration. Feedback control mechanisms regulating CO2 concentration will probably be necessary in a CELSS to reduce this system instability.

Garland, Jay L.↗

Cryogenic Oxygen Storage Modules with Carbon Dioxide Sequestration for Environmental Control and Life Support Applications

NASA Kennedy Space Center engineers developed a Cryogenic Oxygen Storage Module (COSM) to store oxygen in solid-state form and deliver it as a gas to an end-use environmental control and/or life support system. Additionally, the COSM can scrub out nuisance or containment gases such as carbon dioxide and/or water vapor in conjunction with supplying oxygen, forming a synergistic system when used in a closed-loop application. Closed-loop life support systems require both oxygen supply and removal of toxic or nuisance gases such as CO2 from the breathing loop. In most deployed systems, these two requirements are accomplished independently. COSM combines these capabilities to work simultaneously which may allow for reduced system volume, mass, complexity and cost of a rebreathing device.

Jeffrey A Kohler↗

Evaluation of Carbon Dioxide Sensors for the Constellation Space Suit Life Support System for Surface Exploration

This paper presents the findings of the trade study to evaluate carbon dioxide (CO2) sensing technologies for the Constellation (Cx) space suit life support system for surface exploration. The trade study found that nondispersive infrared absorption (NDIR) is the most appropriate high Technology Readiness Level (TRL) technology for the CO2 sensor for the Cx space suit. The maturity of the technology is high, as it is the basis for the CO2 sensor in the Extravehicular Mobility Unit (EMU). The study further determined that while there is a range of commercial sensors available, the Cx CO2 sensor should be a new design. Specifically, there are light sources (e.g., infrared light emitting diodes) and detectors (e.g., cooled detectors) that are not in typical commercial sensors due to cost. These advanced technology components offer significant advantages in performance (weight, volume, power, accuracy) to be implemented in the new sensor. The exact sensor design (light source, transmitting optics, path length, receiving optics and detector) will be specific for the Cx space suit and will be determined by the performance requirements of the Cx space suit. The paper further identifies specifications for some of the critical performance parameters as well as discussing the engineering aspects of implementing the sensor into the Portable Life Support System (PLSS). The paper then presents testing results from three CO2 sensors with respect to issues important to Extravehicular Activity (EVA) applications; stability, humidity dependence and low pressure compatibility. The three sensors include two NDIR sensors, one commercial and one custom-developed by NASA (for a different purpose), and one commercial electrochemical sensor. The results show that both NDIR sensors have excellent stability, no dependence on ambient humidity (when the ambient temperature is above the dew point) and operate in low pressure conditions and after being exposed to a full vacuum. The commercial electrochemical sensor was not suitable for the Cx space suit for surface exploration. Finally, the paper identifies a number of techniques currently under development that offer significant advantages for EVA applications. These include miniaturized, room temperature, solid electrolyte systems and advanced optical detectors.

Dietrich, Daniel L.↗

Final Technical Report

This grant supported research into uses of the 'Hubble Space Telescope' Guide Star Selection System data base for important astrophysical problems ancillary to HST observations. The initial focus was to use the data to survey the frequency of wide binary stars at high galactic latitude, as a probe of local dark matter. In the course of this work, it was also discovered that the data base could be used for a purpose never envisaged by its designers, namely, detection of proper motions in faint stars. Some further evaluation of this capability supported by the grant led to the discovery of an entirely new class of stellar object, namely the dwarf carbon star. Publications supported by this grant, including both papers in refereed journals, and also two Ph.D. thesis dissertations, are described briefly.

Margon, Bruce↗

High Temperature Life Testing of 80Ni-20Cr Wire in a Simulated Mars Atmosphere for the Sample Analysis at Mars (SAM) Instrument Suite Gas Processing System (GPS) Carbon Dioxide Scrubber

In support of the GPS for the SAM instrument suite built by NASA/GSFC, a life test facility was developed to test the suitability of 80Ni-20Cr alloy wire, 0.0142 cm diameter, for use as a heater element for the carbon dioxide scrubber. The element would be required to operate at 1000 C in order to attain the 800 C required for regeneration of the getter. The element also would need to operate in the Mars atmosphere, which consists mostly of CO2 at pressures between 4 and 12 torr. Data on the high temperature degradation mechanism of 80Ni- 20Cr in low pressure CO2, coupled with the effects of thermal cycling, were unknown. In addition, the influence of work hardening of the wire during assembly and the potential for catastrophic grain growth also were unknown. Verification of the element reliability as defined by the mission goals required the construction of a test facility that would accurately simulate the duty cycles in a simulated Mars atmosphere. The experimental set-up, along with the test protocol and results will be described.

Hoffman, Christopher↗

High Temperature Life Testing of 80Ni-20Cr Wire in a Simulated Mars Atmosphere for the Sample Analysis at Mars (SAM) Instrument Suit Gas Processing System (GPS) Carbon Dioxide Scrubber

In support of the GPS for the SAM instrument suite built by GSFC, a life test facility was developed to test the suitability of 80Ni-20Cr wire, 0.0056 inches in diameter, for use as a heater element for the carbon dioxide scrubber. The wire would be required to operate at 1000 C in order to attain the 800 C required for regeneration of the getter. The wire also would need to operate in the Mars atmosphere, which consists mostly of CO2 at pressures between 4 and 12 torr. Data on the high temperature degradation mechanism of 80Ni-20Cr in low pressure CO2, together with the effects of thermal cycling, were unknown. In addition, the influence of work hardening of the wire during assembly and the potential for catastrophic grain growth also were unknown. Verification of the wire reliability as defined by the mission goals required the construction of a test facility that would accurately simulate the duty cycles in a simulated Mars atmosphere. The experimental set-up, along with the test protocol and results will be described.

Gundersen, Cynthia↗

Carbon recycling in materially closed ecological life support systems

Results of studies are presented of materially closed energetically open microbial ecosystems or 'closed ecosystems'. These are natural marine ecosystems that have been sealed in glass containers to prevent material exchange with the environment but allow energy to pass freely through them. They represent model life support systems for the future human habitation of space. The results are discussed analytically and indicate that these ecosystems, when subjected to a constant energy flux, seem to be reliable and self-sufficient systems for recycling of biologically produced carbon compounds.

Obenhuber, D. C.↗

Mineral Inputs, Paleoecological Change, and Holocene Carbon Accumulation at a Boreal Peatland in the Hudson Bay Lowlands, Canada

The Hudson Bay Lowlands (HBL) is a vast contiguous peatland extending over >370,000 km2 in Canada's boreal-subarctic, and is the traditional land of the Omushkego Cree. It is currently undergoing climatic warming alongside other anthropogenic stressors, and contains a large below-ground carbon pool. Understanding how climate variability and multiple stressors impact peat accumulation in this region is critical to discerning how northern peatlands will respond to future climate and land-use changes. Pollen- and macrofossil-based paleoecological reconstructions, and analyses of aluminum (Al) and titanium (Ti) fluxes in a Holocene-aged peat core (VM375) taken from a bog in the Attawapiskat watershed were conducted to link ecosystem changes with hydroclimate and long-term carbon storage. Peat initiation is dated to 5780 cal yr B.P., coincident with land emergence driven by glacial isostatic adjustment. From 4500 to 4200 cal yr B.P., apparent rate of carbon accumulation increased, and was linked to more rapid rates of peat accretion and increases in minerotrophic indicators in the pollen record. This increase in peat accretion and shift in vegetation composition co-occur with higher rates of mineral influx as shown by Ti and Al concentrations, which may have supplied nutrients. A fen to bog transition takes place ~3300 cal yr B.P., with increases in Sphagnum spores and macrofossils, and a decline in the apparent rate of carbon accumulation relative to the earlier half of the record, where paleoecological proxies indicate treed wetland and fen stages. Since peat inception, the total carbon stock of the 260-cm peat column is 110 kg C m−2. This multi-proxy record shows an association between changing peat types and variability in apparent rates of carbon accumulation, and supports the hypothesis that mineral nutrients either supplied by surface hydrology or by eolian deposition played a role in Holocene peat carbon accumulation in eastern North American boreal peatlands.

Dust↗

Toward Integrated Seasonal Predictions of Land and Ocean Carbon Flux: Lessons from the 2015-16 El Nino

Seasonal forecasts made by coupled atmosphere-ocean general circulation models (GCMs) are increasingly able to provide skillful forecasts of climate anomalies. At some centers, the capabilities of these models are being expanded to represent carbon-climate feedbacks including ocean biogeochemistry (OB), terrestrial biosphere (TB) interactions, and fires. These advances raise the question of whether such models can support skillful forecasts of carbon fluxes.Here, we examine whether land and ocean carbon flux anomalies associated with the 2015-16 El Nino could have been predicted months in advance. This El Nino was noteworthy for the magnitude of the ocean temperature perturbation, the skill with which this perturbation was predicted, and the extensive satellite observations that can be used to track its impact. We explore this topic using NASA's Goddard Earth Observing System (GEOS) model, which routinely produces an ensemble of seasonal climate forecasts, and a suite of offline dynamical and statistical models that estimate carbon flux processes. Using GEOS forecast fields from 2015-16 to force flux model hindcasts shows that these models are able to reproduce significant features observed by satellites. Specifically, OB hindcasts are able to predict anomalies in chlorophyll distributions with lead times of 3-4 months. The ability of TB hindcasts to reproduce NDVI anomalies is driven by the skill of the climate forecast, which is greatest at short lead times over tropical landmasses. Statistical fire forecasts driven by ocean climate indices are able to predict burned area in the tropics with lead times of 3-12 months. We also integrate the ocean and land hindcast fluxes into the GEOS GCM to examine the magnitude of the atmospheric carbon dioxide anomaly and compare with satellite and ground-based observations.While seasonal forecasting remains an active area of research, these results demonstrate that forecasts of carbon flux processes can support a variety of applications, potentially allowing scientists to understand carbon-climate feedbacks as they happen and to capitalize on more flexible satellite technologies that allow areas of interest to be targeted with lead times of weeks to months. We also provide a first glimpse at the spring 2019 carbon forecast using the GEOS-based forecasting system.

Ott, L.↗

UHV studies of the interaction of CO with small supported metal particles, Pd/mica

The interaction of carbon monoxide with small palladium particles supported on UHV-cleaved and heat-treated single-crystal mica was studied. The Pd particles were characterized and tested using the techniques of flash thermal desorption, Auger electron spectroscopy, core electron energy loss spectroscopy, and transmission electron microscopy. Evidence is presented for CO decomposition on Pd particles during CO adsorption-desorption experiments. The rate of CO decomposition increased rapidly with diminishing particle size. Residual carbon from CO decomposition blocked CO adsorption and had a strong poisoning effect on the CO oxidation reaction.

Doering, D. L.↗

Building a Data Ecosystem: A New Data Stewardship Paradigm for the Multi-Mission Algorithm and Analysis Platform (MAAP)

New adaptive approaches to Earth observation data stewardship need to be adopted in order to allow for higher data volumes, heterogeneous data and constantly evolving technologies. The data ecosystem approach to stewardship offers a viable solution to this need by placing an emphasis on the relationships between data, technologies and people. In this paper, we present the Joint ESA-NASA Multi-Mission Algorithm and Analysis Platform’s (MAAP) creation of a data ecosystem to support global aboveground terrestrial carbon dynamics research. We present the components needed to support the MAAP data ecosystem along with two data stewardship workflows used in the MAAP and the development of extended metadata for MAAP.

Bugbee, Kaylin↗