Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CaHN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

117 records · Page 7

Evapotranspiration-Based Irrigation Scheduling in Cool-Season Vegetables

Crop evapotranspiration (ETc) is strongly linked with photosynthetically active vegetation fraction (Fc). Estimation of ETc may support efficiency gains in irrigation water management, which in turn can mitigate nitrate leaching, promote water supply sustainability, and reduce energy costs associated with water pumping or transport. The University of California Cooperative Extension operates the CropManage (CM) model as a freely-available web-application for growers and consultants to support irrigation and nitrogen scheduling decisions. CM accounts for the rapid growth and typically brief cycle of cool-season vegetables, where Fc and crop coefficient (fraction of reference ET) can change daily during canopy development. Daily weather conditions are inherently accounted for by use of grass reference ETo data imported from the California Dept. Water Resources. Crop water requirement calculations are output in terms of irrigation system runtime. Empirical equations are used to estimate daily Fc time-series for a given crop type, primarily as a function of planting date and expected harvest. An applications programming interface (API) enables CM to import satellite-based Fc observations from NASA's Satellite Irrigation Management Support, which uses Landsat imagery to monitor about eight million irrigation acres statewide. The API is intended to provide a check on internal CM predictions of Fc and to facilitate expansion of the web-app to new crops and regions. A replicated irrigation trial was performed on cauliflower during spring/summer 2018 at the USDA Agricultural Research Station in Salinas, CA. The crop was established by sprinkler irrigation, and CropManage was then used to guide a series of drip irrigation treatments at 50%, 75%, 100%, and 150% of ETc replacement levels. Results will be presented with respect to water use efficiency, nitrogen use efficiency, biomass yield, and marketable yield. Additional findings will be presented for a celery trial harvested during autumn 2018.

Johnson, Lee↗

Using Weather-Based Irrigation Scheduling to Optimize Red Cabbage Production

A replicated field trial was performed on a Chualar sandy loam in California’s Salinas Valley during 2020 to investigate the yield response of drip-irrigated red cabbage to applied water volume. The crop was transplanted on 29-April and established with approximately 4 inches of water uniformly applied by overhead sprinklers. At 22 days after transplanting (DAT), five drip-irrigation treatments were established at 50, 75, 100, 125, and 150% of estimated daily crop evapotranspiration (ETc). The treatments were replicated 6 times following a randomized complete block design. The 100% crop water requirement was specified by CropManage, an irrigation scheduling application that combines a crop coefficient approach with reference evapotranspiration data from the California Irrigation Management Information System. The crop was irrigated 3 times per week. Nitrogen fertilizer, totaling 320 lbs/ac, was applied through the drip system once per week. Commercial carton yields were evaluated 85 DAT. The 100% ETc treatment received a total of 18.3 inches of water including sprinkler establishment and had the highest yield at 57 tons/ac, while the 50% treatment (11.5 inches) yielded a low of 32 tons/ac. For reference, average applied water reported for this crop on the Central Coast is about 22.5 inches by way of a variety of irrigation methods including drip, sprinkler, and furrow. Aboveground biomass was evaluated 91 DAT. The 100% treatment had the highest fresh (105 tons/ac) and dry (7.7 tons/ac) biomass yield. Commercial bulk yields at 98 DAT and were maximized by 20-24 inches of water (100%, 125% treatments) and ranged from a high of 67 tons/ac for 125% ETc treatment (24.3 inches of water) to 35 tons/ac for the 50% treatment (12.6 inches). The results demonstrated that yield and quality targets for this crop can be met by drip irrigation, and CropManage is an effective decision support tool for evaluating crop water requirements based on weather data.

Weather-Based↗

Initial Evaluation of CropManage Decision-Support Model for Vineyard ET Estimation

The CropManage(CM) decision-support web application was originally developed by U.C. Cooperative Extension to support evapotranspiration (ET) based irrigation scheduling and nutrient management of cool-season vegetables. The model uses prescribed crop phenology curves to develop daily estimates of fractional green canopy cover (Fc) within the field. Periodic Fc observations acquired by ground-based methods or imported from NASA’s Satellite Irrigation Management Support (SIMS) can be used to adjust the prescribed timeseries for such factors as weather anomalies or non-standard agronomic practice, as needed. Fc is then converted to daily crop coefficient (fraction of reference ET) values. The crop coefficient is combined with reference evapotranspiration, collected by the California Irrigation Management Information System, to derive daily ET estimates for the given field. Irrigation runtime recommendations are issued for a given date based on total ET since the last irrigation event (less any rainfall), and corrected for distribution uniformity of the water delivery system. In this project, CM was adapted to vineyards by adding sub-models to account for early-season depletion of stored soil moisture, cover crop presence, and intentional water stress. An initial trial was performed on a Central Coast winegrape vineyard, where an eddy covariance tower measured daily ET during from May-Dec 2020. Total ET for the period showed strong agreement between the tower-based measurements (443 mm) and the CM model (431 mm). The model tended to overestimate cumulative ET during mid-June by up to 30 mm (about 15%) and later underestimated cumulative ET by as much as 65 mm (about 23%) in late September, suggesting that additional model calibration is needed to improve simulation of within-season variability. Results will be reported for trials on additional vineyard sites conducted during the 2021 season.

Evaluation↗

CropManage Application for Vineyard Irrigation Decision-Support

CropManage is a free web-application developed by U.C. Cooperative Extension to support evapotranspiration based irrigation scheduling and nutrient management for major specialty crops. Prescribed phenology curves are used to develop daily estimates of canopy cover within a given field, based on days since planting (annual crops) or budbreak (trees, vines). These curves are modulated by a MaxCan parameter representing seasonal maximum canopy cover. Crop development observations can be used to adjust for such factors as weather anomalies or non-standard agronomic practice, as needed. Canopy cover is converted to crop coefficient and combined with reference evapotranspiration to derive daily water consumption. Guidance on crop water requirement is then conveyed to users in terms of system runtime issued on-demand for a given date, largely based on total evapotranspiration since last irrigation event. In this study, CropManage was adapted to vineyards by adding modules accounting for early-season soil moisture depletion and cover crop presence. A crop stress parameter was added to accommodate deficit irrigation practice, allowing the user to specify percentage departure from full water requirement along with start/stop dates. An initial verification exercise was performed on three winegrape vineyards located in California’s Central Coast (2020), North Coast (2020) and Central Valley (2019). Daily crop evapotranspiration was monitored by eddy-covariance fluxtowers. MaxCan was measured by ground and satellite observation. Stress regime was specified by grower practice where available, otherwise stress levels were inferred from applied water records. Mean absolute error and mean bias error of modeled cumulative evapotranspiration were computed with respect to the eddy covariance measurements collected throughout the growing season. Results indicate the modified CropManage water management module performs reasonably well for winegrape. Additional effort is planned to modify the nutrient module for vineyard use.

CropManage↗

Evapotranspiration Based Irrigation Trials Examine Water Requirement, Nitrogen Use, and Yield of Romaine Lettuce in the Salinas Valley

Cool season vegetables require adequate soil moisture to assure that maximum yield and quality are achieved. On California’s central coast, where the majority of cool season vegetables are produced in the US, long-term overpumping of irrigation water has reduced groundwater levels and led to environmental degradation. Two evapotranspiration (ET) based irrigation field trials were performed near Salinas CA (USA) to determine if ET-based irrigation scheduling could conserve water while producing romaine lettuce (cv. Sun Valley) of commercially viable yield. Sprinklers were used for seed germination and crop establishment. Four drip irrigation treatments were then imposed using a randomized complete block design with six replications. The CropManage decision support model was used to estimate the full (100%) crop water requirement based mainly on ET replacement. Other treatments included 50% 75% and 150% of the full water requirement. The 100% treatment received 185 mm of water in 2015 and 247 mm in 2016, both of which were well below prior guidance and grower reports. Yields from the 100% and 150% treatments were not significantly different and were similar to industry average, while yields were significantly lower for the 50% and 75% treatments. The 100% treatment had the highest water use efficiency, and the 100% and 150% treatments together had the highest nitrogen recovery efficiency. Irrigation of romaine near the 100% ET replacement level can potentially reduce environmental impacts associated with nitrate leaching and surface runoff.

CropManage decision support system↗

Measured and Modeled Vineyard Canopy Development and Water Use

Two publicly available applications relevant to vineyard irrigation management are described. OpenET is a satellite-based system that applies an ensemble of remote sensing methods to enable wide-area monitoring of evapotranspiration (ET) and related measures such as vegetation canopy development (via the NDVI spectral index). Data are freely available at one-quarter acre spatial resolution, and may be automatically aggregated to the individual block level. The satellite-based daily ET data were compared with in-situ eddy covariance measurements collected by micro-meteorological instrumentation in a Central Coast vineyard over a three-year period (2020-2022). Estimation uncertainties were reasonably consistent with prior reports for GRAPEX sites in the Central Valley and North Coast. The CropManage (CM) web application is a free software tool developed and operated U.C. Cooperative Extension for ET-based irrigation scheduling of major specialty crops. CM provides specific guidance for irrigation events in terms of irrigation system runtime. Applied water recommendations are based largely on estimated ET, derived from assumed canopy cover and associated crop coefficients, since the last irrigation or rainfall event. The application was recently adapted to vineyards by accounting for presence of winter/spring cover crop, and vine water stress imposed by regulated deficit irrigation. A 2022 field campaign involved 12 Central Coast and San Joaquin Valley commercial vineyards, and OpenET data were used to help evaluate CM output. Maximum percent vine cover was compared to estimates derived from average July satellite NDVI. The difference for 10 sites lacking midseason groundcover ranged from 0-7% between datasets with average agreement near 4%. Cumulative ET estimates agreed with OpenET to within 12% at the majority of sites, while larger discrepancies at the remaining sites may require additional data collection and analysis during the 2023 season. Satellite based systems such as OpenET have the potential to help parameterize CropManage and similar agricultural decision-support systems.

Measured↗

Satellite-assisted Evaluation of Irrigation Application Efficiency for Lettuce in the Salinas Valley

The Salinas Valley region of California’s Central Coast is a majorU.S. vegetable producer. Lettuce is a leading commodity, grown on about 100,000 acres with annual value near $1.4B (2022 Monterey County Ag Report). Vegetables crops in the area aretypically well watered and fertilized in pursuit of commercial yield and quality standards. Information on irrigation application efficiency, meanwhile, can enhance waterresource sustainability and mitigate impacts of nitrate infiltrationon groundwater quality. The Crop Consumptive Use Fraction (CCUF), previously recommended by the California Department of Water Resources, is a metric that expresses evapotranspiration (ET) of applied water relative to total applied water. More recently under Assembly Bill 1668 addressing water conservation and drought planning, the metric can be used to help quantify application efficiency to support preparation of agricultural water management plans in the state. This study will report CCUF evaluations from several commercial lettuce plantings in the Salinas Valley during the 2022 dry season (late spring-early fall). The evaluations were derived from satellite-based observations of cropET from the OpenETcloud application, and applied water monitored by in-line flowmetersand supplemented by grower reports of irrigation system runtime. The study will also compare observed (satellite-based) ET with modeled ET from the CropManage irrigationand nutrient management decision-support system operated by Cooperative Extension. Additional study in cool-season vegetables is ongoing in 2023.

Satellite-assisted↗

An improved synthetic signal injection routine for HAYSTAC

Microwave cavity haloscopes are among the most sensitive direct detection experiments searching for dark matter axions via their coupling to photons. When the power of the expected microwave signal due to axion-photon conversion is on the order of 10-24 W, having the ability to validate the detector response and analysis procedure by injecting realistic synthetic axion signals becomes helpful. Here we present a method based on frequency hopping spread spectrum for synthesizing axion signals in a microwave cavity haloscope experiment. It allows us to generate a narrow and asymmetric shape in frequency space that mimics an axion's spectral distribution, which is derived from a Maxwell-Boltzmann distribution. In addition, we show that the synthetic axion's power can be calibrated with reference to the system noise. Compared to the synthetic axion injection in HAYSTAC phase I, we demonstrated synthetic signal injection with a more realistic lineshape and calibrated power.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗