Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPRESSIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

A practical discrete-adjoint method for high-fidelity compressible turbulence simulations

Methods and computing hardware advances have enabled accurate predictions of complex compressible turbulence phenomena, such as the generation of jet noise that motivates the present effort. However, limited understanding of underlying physical mechanisms restricts the utility of such predictions since they do not, by themselves, indicate a route to design improvements. Gradient-based optimization using adjoints can circumvent the flow complexity to guide designs, though this is predicated on the availability of a sufficiently accurate solution of the forward and adjoint systems. These are challenging to obtain, since both the chaotic character of the turbulence and the typical use of discretizations near their resolution limits in order to efficiently represent its smaller scales will amplify any approximation errors made in the adjoint formulation. Formulating a practical exact adjoint that avoids such errors is especially challenging if it is to be compatible with state-of-the-art simulation methods used for the turbulent flow itself. Automatic differentiation (AD) can provide code to calculate a nominally exact adjoint, but existing general-purpose AD codes are inefficient to the point of being prohibitive for large-scale turbulence simulations. Here, we analyze the compressible flow equations as discretized using the same high-order workhorse methods used for many high-fidelity compressible turbulence simulations, and formulate a practical space–time discrete-adjoint method without changing the basic discretization. A key step is the definition of a particular discrete analog of the continuous norm that defines our cost functional; our selection leads directly to an efficient Runge–Kutta-like scheme, though it would be just first-order accurate if used outside the adjoint formulation for time integration, with finite-difference spatial operators for the adjoint system. Its computational cost only modestly exceeds that of the flow equations. We confirm that its accuracy is limited by computing precision, and we demonstrate it on the aeroacoustic control of a mixing layer with a challengingly broad range of turbulence scales. For comparison, the error from a corresponding discretization of the continuous-adjoint equations is quantified to potentially explain its limited success in past efforts to control jet noise. The differences are illuminating: the continuous-adjoint is shown to suffer from exponential error growth in (reverse) time even for the best-resolved largest turbulence scales. Implications for jet noise reduction and turbulence control in general are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantitative measurements of density in shock-compressed silver up to 330 GPa using x-ray diffraction

This work presents a structural study of shock-compressed states in Ag to 331 GPa, accessed via laser shock compression. Structures of the resulting crystalline phases and the average atomic distribution of the liquid state are determined using in situ x-ray diffraction. We employ structure factor analysis, adapted for a non-monochromatic x-ray source, to determine the density of the liquid phase from analysis of x-ray diffraction data for the first time in shock compressed Ag. We also present a detailed analysis of the crystalline phases, which shows good agreement with the phase boundaries reported in previous experimental and theoretical works. We utilize the whole powder pattern fitting approach implemented in the MAUD package to constrain stacking faults in the face centered cubic structure. We observe the ambient fcc structure up to a stress of 146 GPa before a transition to a body-centered cubic structure and liquid phase at 179 GPa, with full melting above 212 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new approach for drying moist air: The ideal Claridge-Culp-Liu dehumidification process with membrane separation, vacuum compression and sub-atmospheric condensation; Une nouvelle approche pour assécher l’air humide: Le procédé idéal de déshumidification Claridge-Culp-Liu avec séparation membranaire, compression sous vide et condensation sous-atmosphérique

The Claridge-Culp-Liu Dehumidification Process is a novel and efficient approach to removing water vapor from air using a combination of membrane separation, vacuum compression and sub-atmospheric condensation. The basic theory of this process is to separate water vapor from moist air flowing across one side of a membrane by applying a partial vacuum to the opposite side of the membrane and then compressing the water vapor to its saturation pressure at the wet-bulb temperature of the ambient air so as to facilitate condensation. We report this process has a fundamental efficiency limit that approximates the Carnot limit, but for eight different ideal dehumidification-only cases examined herein, the process requires only 26–56% the energy required by a Carnot vapor-compression system. Furthermore, the limiting energy required by an ideal 5-stage membrane system is 16–31% that of a Carnot system for the same cases. Of special importance, the ideal Claridge-Culp-Liu Dehumidification Process requires less than 5% of the energy required by an ideal desiccant process for all cases treated. The Claridge-Culp-Liu Dehumidification Process can also be combined with evaporative cooling to provide dehumidification and sensible cooling with the temperature and humidity controlled independently. Of special importance, this system uses no HFC refrigerants, and it generates pure water as a by-product.

42 ENGINEERING↗

Synthesis and structural characterization of La{sub x}Sr{sub 1-x}MnO{sub 2.6+{delta}} (0.1<x<0.4) compounds displaying compressed octahedral coordination of Mn{sup (4-5x)+}

La{sub x}Sr{sub 1-x}MnO{sub 2.6+{delta}} (x=0.1-0.4) compounds have been obtained by low-temperature annealing of stoichiometric materials in hydrogen. La{sub 0.1}Sr{sub 0.9}MnO{sub 2.6+{delta}} ({delta}=0.15) and La{sub 0.3}Sr{sub 0.7}MnO{sub 2.6}, tetragonal (P4/m), and La{sub 0.2}Sr{sub 0.8}MnO{sub 2.6,} pseudo-tetragonal monoclinic (P2/m), structures are isostructural with oxygen-vacancy-ordered Sr{sub 5}Mn{sub 5}O{sub 13} (a=b{approx}{radical}(5)a{sub P}, c{approx}a{sub P}). La{sub 0.4}Sr{sub 0.6}MnO{sub 2.6} shows cubic perovskite structure with disordered oxygen vacancies. In the vacancy-ordered (La{sub x}Sr{sub 1-x}){sub 5}Mn{sub 5}O{sub 13} phases four out of five Mn cations are Mn{sup 3+} and show a typical Jahn-Teller elongated pyramidal coordination while the fifth one Mn{sup (4-5x)+}, in octahedral environment, shows decreasing formal charge from Mn{sup 4+} (x=0) to Mn{sup 2.5+}x=0.3. This unusual selective doping of the octahedral site produces structural strain due to increasing size of the Mn{sup (4-5x)+} and, in the case of (La{sub 0.2}Sr{sub 0.8}){sub 5}Mn{sub 5}O{sub 13}, the unusual compressed octahedral arrangement of oxygen atoms around it. The coordination geometry implies that either the d{sub x{sup 2}-y{sup 2}} orbital is occupied, which would be a rare example of inverted occupancy of e{sub g} orbitals in manganites, or that disordered Mn{sup 3+} apically elongated MnO{sub 6} octahedra are present with normal electronic configuration d{sub t{sub 2}{sub g}}{sup 3}d{sub x{sup 2}-y{sup 2}}{sup 0}d{sub z{sup 2}}{sup 1}, and the observed bond distances are the average of the long and intermediate in-plane Mn-O bonds. Several structural features favor the second case. - Abstract: La{sub x}Sr{sub 1-x}MnO{sub 2.6} compounds (0.1{<=}x{<=}0.4) show a structural phase transition from Sr{sub 5}Mn{sub 5}O{sub 13}-type oxygen-vacancy-ordering (x{<=}0.3) to vacancy-disordered x=0.4, showing clear indications of short-range ordering. Compressed MnO{sub 6} octahedra are observed for Mn{sup 3+}-containing x=0.2 compound that is probably consequence of the presence of elongated MnO{sub 6} octahedra with the long-axis disordered in the x-y plane . Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical and experimental studies of compression and shear deformation behavior of Osmium to 280 GPa

Abstract The compression behavior of osmium metal was investigated up to 280 GPa (volume compression V/V o = 0.725) under nonhydrostatic conditions at ambient temperature using angle dispersive axial x-ray diffraction (A-XRD) with a diamond anvil cell (DAC). In addition, shear strength of osmium was measured to 170 GPa using radial x-ray diffraction (R-XRD) technique in DAC. Both diffraction techniques in DAC employed platinum as an internal pressure standard. Density functional theory (DFT) calculations were also performed, and the computed lattice parameters and volumes under compression are in good agreement with the experiments. DFT predicts a monotonous increase in axial ratio ( c/a ) with pressure and the structural anomalies of less than 1% in ( c/a ) ratio reported below 150 GPa were not reproduced in theoretical calculations and hydrostatic measurements. The measured value of shear strength of osmium ( τ ) approaches a limiting value of 6 GPa above a pressure of 50 GPa in contrast to theoretical predictions of 24 GPa and is likely due to imperfections in polycrystalline samples. DFT calculations also enable the studies of shear and tensile deformations. The theoretical ideal shear stress is found along the (001)[1–10] shear direction with the maximal shear stress ∼24 GPa at critical strain ∼0.13.

Lin, Chia-Min↗

Compressed Optimization of Device Architectures for Semiconductor Quantum Devices

Recent advances in nanotechnology have enabled researchers to manipulate small collections of quantum-mechanical objects with unprecedented accuracy. In semiconductor quantum-dot qubits, this manipulation requires controlling the dot orbital energies, the tunnel couplings, and the electron occupations. These properties all depend on the voltages placed on the metallic electrodes that define the device, the positions of which are fixed once the device is fabricated. While there has been much success with small numbers of dots, as the number of dots grows, it will be increasingly useful to control these systems with as few electrode voltage changes as possible. Here, we introduce a protocol, which we call the "compressed optimization of device architectures" (CODA), in order both to efficiently identify sparse sets of voltage changes that control quantum systems and to introduce a metric that can be used to compare device designs. As an example of the former, we apply this method to simulated devices with up to 100 quantum dots and show that CODA automatically tunes devices more efficiently than other common nonlinear optimizers. To demonstrate the latter, we determine the optimal lateral scale for a triple quantum dot, yielding a simulated device that can be tuned with small voltage changes on a limited number of electrodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In situ analysis of the structural transformation of glassy carbon under compression at room temperature

Room temperature compression of graphitic materials leads to interesting superhard sp 3 rich phases which are sometimes transparent. In the case of graphite itself, the sp 3 rich phase is proposed to be monoclinic M-carbon; however, for disordered materials such as glassy carbon the nature of the transformation is unknown. We compress glassy carbon at room temperature in a diamond anvil cell, examine the structure in situ using x-ray diffraction, and interpret the findings with molecular dynamics modeling. Experiment and modeling both predict a two-stage transformation. First, the isotropic glassy carbon undergoes a reversible transformation to an oriented compressed graphitic structure. This is followed by a phase transformation at ~35 GPa to an unstable, disordered sp 3 rich structure that reverts on decompression to an oriented graphitic structure. Analysis of the simulated sp 3 rich material formed at high pressure reveals a noncrystalline structure with two different sp 3 bond lengths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compressive Sensing with Cross-Validation and Stop-Sampling for Sparse Polynomial Chaos Expansions

Here, compressive sensing is a powerful technique for recovering sparse solutions of underdetermined linear systems, which is often encountered in uncertainty quantification analysis of expensive and high-dimensional physical models. We perform numerical investigations employing several compressive sensing solvers that target the unconstrained LASSO formulation, with a focus on linear systems that arise in the construction of polynomial chaos expansions. With core solvers l1_ls, SpaRSA, CGIST, FPC_AS, and ADMM, we develop techniques to mitigate overfitting through an automated selection of regularization constant based on cross-validation, and a heuristic strategy to guide the stop-sampling decision. Practical recommendations on parameter settings for these techniques are provided and discussed. The overall method is applied to a series of numerical examples of increasing complexity, including large eddy simulations of supersonic turbulent jet-in-crossflow involving a 24-dimensional input. Through empirical phase-transition diagrams and convergence plots, we illustrate sparse recovery performance under structures induced by polynomial chaos, accuracy, and computational trade-offs between polynomial bases of different degrees, and practicability of conducting compressive sensing for a realistic, high-dimensional physical application. Across test cases studied in this paper, we find ADMM to have demonstrated empirical advantages through consistent lower errors and faster computational times.

97 MATHEMATICS AND COMPUTING↗

Simultaneous contrast improvement and temporal compression using divided-pulse nonlinear compression

We experimentally demonstrate how divided-pulse nonlinear compression can be used to improve the temporal contrast of a laser pulse train while simultaneously temporally compressing the pulses. We measure a contrast improvement of almost four orders of magnitude on a nanosecond time scale and temporally compress the pulses from 1.2 ps to 187 fs. The efficiency of our method is also competitive with other contrast improvement methods, with 72% efficiency measured for the main pulse. We expect the method will be useful in the continuing development of high-power, Yb regenerative amplifiers, which suffer from both significant prepulses and relatively long pulse durations.

47 OTHER INSTRUMENTATION↗

Phase Transitions in Amorphous Germanium under Non-Hydrostatic Compression

As the pioneer semiconductor in transistor, germanium (Ge) has been widely applied in information technology for over half a century. Although many phase transitions in Ge have been reported, the complicated phenomena of the phase structures in amorphous Ge under extreme conditions are still not fully investigated. Here, we report the different routes of phase transition in amorphous Ge under different compression conditions utilizing diamond anvil cell (DAC) combined with synchrotron-based X-ray diffraction (XRD) and Raman spectroscopy techniques. Upon non-hydrostatic compression of amorphous Ge, we observed that shear stress facilitates a reversible pressure-induced phase transformation, in contrast to the pressure-quenchable structure under a hydrostatic compression. These findings afford better understanding of the structural behaviors of Ge under extreme conditions, which contributes to more potential applications in the semiconductor field.

Xu, Jianing (ORCID:0000000325474344)↗

Stored energy function and compressibility of compressible rubberlike materials under large strain

By using new invariants in the theory of finite elasticity an expression is obtained for the stored energy function of slightly compressible materials in which the effects of the distortional change (change of shape) and of the volume change are clearly separated. The volume-related terms are expressed as a function of the third invariant, the classical compressibility, and an induced anisotropy of the effective compressibility which is due to the large deformations. After evaluating the terms, using data on pressure, volume, uniaxial strain, and fractional volume change vs strain data on natural rubber from the literature, it is shown that the volume change contribution to the total stress observed in a simple tensile experiment can be clearly separated from the distortional contribution, even at finite strains.

Peng, S. T. J.↗