Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Application of multispectral color photography to flame flow visualization

For flames of short duration and low intensity of radiation a spectroscopical flame diagnostics is difficult. In order to find some other means of extracting information about the flame structure from its radiation, the feasibility of using multispectral color photography was successfully evaluated. Since the flame photographs are close-ups, there is a considerable parallax between the single images, when several cameras are used, and additive color viewing is not possible. Each image must be analyzed individually, it is advisable to use color film in all cameras. One can either use color films of different spectral sensitivities or color films of the same type with different color filters. Sharp cutting filters are recommended.

Stoffers, G.↗
NASA NTRS1980

A color-ratio map of Mercury

Orange and UV frames are used to construct a color-ratio map of the portion of Mercury imaged by Mariner 10, with at least two independent color-ratio images being used for each region in order to prevent spurious, blemish-induced color. Color differences appear to be smaller than those of the moon, and many apparently fresh craters and their ray systems tend to be bluer than their surroundings. Regions of interesting color contrast are noted, and it is concluded that there is little evident correlation of color with either geology or topography.

Hapke, B.↗
NASA NTRS1982

Color visualization for fluid flow prediction

High-resolution raster scan color graphics allow variables to be presented as a continuum, in a color-coded picture that is referenced to a geometry such as a flow field grid or a boundary surface. Software is used to map a scalar variable such as pressure or temperature, defined on a two-dimensional slice of a flow field. The geometric shape is preserved in the resulting picture, and the relative magnitude of the variable is color-coded onto the geometric shape. The primary numerical process for color coding is an efficient search along a raster scan line to locate the quadrilteral block in the grid that bounds each pixel on the line. Tension spline interpolation is performed relative to the grid for specific values of the scalar variable, which is then color coded. When all pixels for the field of view are color-defined, a picture is played back from a memory device onto a television screen.

Smith, R. E.↗
NASA NTRS1981

Color and temperature signatures of ocean fronts observed with the Nimbus-7 CZCS

The Nimbus-7 Coastal Zone Color Scanner has a unique capability for imaging simultaneously the optical (ocean color) and surface temperature (thermal infrared) signatures of ocean fronts. Examples of such color and temperature visualizations of some ocean fronts delineate virtually identical morphology. In other cases, however, the two signatures are displaced horizontally by tens of km, and display markedly different morphology and fine structure. For example, an image of the Gulf Stream's north wall over the Grand Banks shows the sharpest color front to occur approximately 50 km away from the sharpest temperature front. Moreover, the fine structure of the color front is qualitatively suggestive of disorganized turbulent diffusion, whereas that of the thermal front shows distinctive shear instabilities. These differences can occur because the infrared temperature image represents the top 0.05 millimeter of the sea surface, whereas the ocean color image represents the upper meters to decameters of the sea.

Mueller, J. L.↗
NASA NTRS1985

Color measurement and discrimination

Theories of color measurement attempt to provide a quantative means for predicting whether two lights will be discriminable to an average observer. All color measurement theories can be characterized as follows: suppose lights a and b evoke responses from three color channels characterized as vectors, v(a) and v(b); the vector difference v(a) - v(b) corresponds to a set of channel responses that would be generated by some real light, call it *. According to theory a and b will be discriminable when * is detectable. A detailed development and test of the classic color measurement approach are reported. In the absence of a luminance component in the test stimuli, a and b, the theory holds well. In the presence of a luminance component, the theory is clearly false. When a luminance component is present discrimination judgements depend largely on whether the lights being discriminated fall in separate, categorical regions of color space. The results suggest that sensory estimation of surface color uses different methods, and the choice of method depends upon properties of the image. When there is significant luminance variation a categorical method is used, while in the absence of significant luminance variation judgments are continuous and consistant with the measurement approach.

Wandell, B. A.↗
NASA NTRS1986

Multi-color incomplete Cholesky conjugate gradient methods for vector computers

In this research, we are concerned with the solution on vector computers of linear systems of equations, Ax = b, where A is a larger, sparse symmetric positive definite matrix. We solve the system using an iterative method, the incomplete Cholesky conjugate gradient method (ICCG). We apply a multi-color strategy to obtain p-color matrices for which a block-oriented ICCG method is implemented on the CYBER 205. (A p-colored matrix is a matrix which can be partitioned into a pXp block matrix where the diagonal blocks are diagonal matrices). This algorithm, which is based on a no-fill strategy, achieves O(N/p) length vector operations in both the decomposition of A and in the forward and back solves necessary at each iteration of the method. We discuss the natural ordering of the unknowns as an ordering that minimizes the number of diagonals in the matrix and define multi-color orderings in terms of disjoint sets of the unknowns. We give necessary and sufficient conditions to determine which multi-color orderings of the unknowns correpond to p-color matrices. A performance model is given which is used both to predict execution time for ICCG methods and also to compare an ICCG method to conjugate gradient without preconditioning or another ICCG method. Results are given from runs on the CYBER 205 at NASA's Langley Research Center for four model problems.

Poole, E. L.↗
NASA NTRS1988

Color and population gradients in the core of the postcollapse globular cluster M30

A new technique has been developed for seeking color gradients in multicolor CCD images of a globular cluster. Application of this technique to M30 confirms the radial color gradient reported by others. The B - V and V - R colors show linear gradients, when plotted against log r, that are many times their statistical errors. In the radial range 3-100 arcsec, the B - V and V - R colors increase outwards by about (0.18 + or - 0.015) mag/dex and (0.09 + or - 0.01) mag/dex, respectively. Color-magnitude arrays of the central region show that the Balmer-line strength that accompanies the central blueness is due to an increased proportion of blue-horizontal-branch starlight in the center. This excess does not appear to be statistically significant in terms of star numbers, even though the color gradient is so highly significant.

Piotto, Giampaolo↗
NASA NTRS1991

A color-coded vision scheme for robotics

Most vision systems for robotic applications rely entirely on the extraction of information from gray-level images. Humans, however, regularly depend on color to discriminate between objects. Therefore, the inclusion of color in a robot vision system seems a natural extension of the existing gray-level capabilities. A method for robot object recognition using a color-coding classification scheme is discussed. The scheme is based on an algebraic system in which a two-dimensional color image is represented as a polynomial of two variables. The system is then used to find the color contour of objects. In a controlled environment, such as that of the in-orbit space station, a particular class of objects can thus be quickly recognized by its color.

Johnson, Kelley Tina↗
NASA NTRS1991

Multi-colored layers for visualizing aerodynamic flow effects

A method is provided for visualizing aerodynamic flow effects on a test surface. First, discrete quantities of a sublimating chemical such as naphthalene are distinctively colored via appropriate dyes or paints. Next, a uniform layer of the sublimating chemical having a particular color is applied to the test surface. This layer is covered with a second uniform layer of a different colored sublimating chemical, and so on until a composite of multi-colored layers is formed having a discrete thickness. Friction caused by an airflow results in the distinctly colored layers being removed in proportion to such aerodynamic flow characteristics as velocity and temperature, resulting in a multi-colored portrait which approximates the air flow on the underlying test surface.

Jensen, Ronald N.↗
NASA NTRS1992

Single layer multi-color luminescent display and method of making

The invention is a multi-color luminescent display comprising an insulator substrate and a single layer of host material, which may be a phosphor deposited thereon that hosts one or more different impurities, therein forming a pattern of selected and distinctly colored phosphors such as blue, green, and red phosphors in a single layer of host material. Transparent electrical conductor means may be provided for subjecting selected portions of the pattern of colored phosphors to an electric field, thereby forming a multi-color, single layer electroluminescent display. A method of forming a multi-color luminescent display includes the steps of depositing on an insulator substrate a single layer of host material, which itself may be a phosphor, with the properties to host varying quantities of different impurities and introducing one or more of said different impurities into selected areas of the said single layer of host material by thermal diffusion or ion implantation to form a pattern of phosphors of different colors in the said single layer of host material.

Robertson, James B.↗
NASA NTRS1995

Synthesis of low color, atomic oxygen resistant polyimides

The purpose of this project was to develop low color, atomic oxygen resistant polyimides for potential applications on spacecraft in low earth orbit. The material is needed in order to protect satellites and spacecraft from the gases and radiation found at those altitudes. Phosphorous containing polyimides have been shown to be especially resistant to corrosion and weight loss under oxygen plasma. Unfortunately the color of these phosphorous containing polyimides is still too high for them to be good heat insulators. While they are not as effective as teflon, the current material of choice. polyimides are much less dense than teflon and would be especially valuable if they could be made with low color. The approach taken was to synthesize a monomer which would contain the elements needed for giving the final polyimide its desired properties. In particular the monomer should incorporate phosphine or phosphine oxides and have bulky side groups to block any color forming charge transfer structures. The target molecule, 3,5-di-(trifluoromethylphenyl)-bis(3-aminophenyl) phosphine oxide, (containing both a phosphine oxide group and a bulky ditrifluoromethylphenyl group) was synthesized via three reactions in overall yield of 21 percent. In addition, a model compound, bis(3-phenylamine) phenyl phosphine oxide, was synthesized two different ways in order to establish the conditions for the nitration of phosphine oxides and their reduction to the amine. Finally, a trisubstituted phosphine oxide was synthesized. In all, seven phosphorus containing organic compounds were synthesized, purified and characterized. The model compound was reacted with oxydiphthalic anhydride to form a polyamic acid with inherent viscosity of 0.34. This material was cast into a film and heated, forming a normally colored fairly strong polyimide with a Tg of 240 C. The target compound was reacted with 6-fluorodiphthalic anhydride to give a polyamic acid with inherent viscosity of 0.19 and cast to give a heavily cracked colored film with a Tg of 230 C.

MacInnes, Dave↗
NASA NTRS1999

Space Environmental Effects on Colored Coatings and Anodizes

Colored coatings and anodizes are used on spacecraft as markers and astronaut visual aids. These materials must be stable in the space environment and withstand atomic oxygen, ultraviolet radiation, particulate radiation, thermal cycling, and high vacuum without significant change in optical and mechanical properties. A variety of colored coatings and anodizes have been exposed to simulated space environments at Marshall Space Flight Center and also actual space environment as part of the Passive Optical Sample Assembly (POSA) - I flight experiment. Colored coatings were developed by AZ Technology, Huntsville, AL, under a NASA contract for International Space Station (ISS). These include yellow, red, blue, and black paints suitable for Extra-Vehicular Activity (EVA) visual aids and ISS emblems. AaChron, Inc., Minneapolis, MN, developed stable colored anodizes, also in yellow, red, blue, and black, for astronaut visual aids. These coatings were exposed in the laboratory to approximately 550 equivalent sun-hours of solar ultraviolet radiation and approximately 1 x 10(exp 21) atoms/sq cm of atomic oxygen in vacuum. The AZ Technology yellow colored coating, designated TMS800IY, and all four AaChron colored anodizes were flown on POSA-I. POSA-I was a Risk Mitigation Experiment for ISS. It was attached to the exterior of the Mir space station docking module by EVA and was exposed for 18 months. The laboratory-simulated space environment, the natural space environment and the unique environment of an orbiting, active space station and their effects on these developmental materials are discussed.

Kamenetzky, Rachel R.↗
NASA NTRS2001

Satellite Ocean Color: Present Status, Future Challenges

We are midway into our 5th consecutive year of nearly continuous, high quality ocean color observations from space. The Ocean Color and Temperature Scanner/Polarization and Directionality of the Earth's Reflectances (OCTS/POLDER: Nov. 1996 - Jun. 1997), the Sea-viewing Wide Field-of-view Sensor (SeaWiFS: Sep. 1997 - present), and now the Moderate Resolution Imaging Spectrometer (MODIS: Sep. 2000 - present) have and are providing unprecedented views of chlorophyll dynamics on global scales. Global synoptic views of ocean chlorophyll were once a fantasy for ocean color scientists. It took nearly the entire 8-year lifetime of limited Coastal Zone Color Scanner (CZCS) observations to compile seasonal climatologies. Now SeaWIFS produces comparably complete fields in about 8 days. For the first time, scientists may observe spatial and temporal variability never before seen in a synoptic context. Even more exciting, we are beginning to plausibly ask questions of interannual variability. We stand at the beginning of long-time time series of ocean color, from which we may begin to ask questions of interdecadal variability and climate change. These are the scientific questions being addressed by users of the 18-year Advanced Very High Resolution Radiometer time series with respect to terrestrial processes and ocean temperatures. The nearly 5-year time series of ocean color observations now being constructed, with possibilities of continued observations, can put us at comparable standing with our terrestrial and physical oceanographic colleagues, and enable us to understand how ocean biological processes contribute to, and are affected by global climate change.

Gregg, Watson W.↗
NASA NTRS2001

Spectral Data Assimilation for Merging Satellite Ocean Color Imagery

The Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) project was initiated 'to develop a methodology and operational capability to combine data products from various ocean color missions in a manner that ensures the best possible global coverage and best exploits the complementary missions of the sensors'. While the merging of data from multiple sources has already been implemented for sea surface temperature (SST), altimetry or clouds, this is a new topic in ocean color science. Merging ocean color data has obvious advantage in terms of spatial and temporal coverage of the global ocean but data merging should also result in new, more diverse and improved data products with lower uncertainties. The merging of ocean color satellite data is generally considered at the level of the global gridded products, i.e., NASA Level-3 and, more specifically, for the merging of chlorophyll a concentration data, [Ch1]. This approach limits computational issues and deals with a unique, simple quantity, [Ch1]. However, ocean color data merging can also be conducted at the level of water-leaving radiances, LwN(lamda), using either empirical or semi-analytical algorithms. Although more challenging, this latter approach is potentially extremely powerful as it can achieve good consistency in the final data products and can take advantage of both the specificities and differences of each source of data. The demonstration of the feasibility of such approach is the main objective of our SIMBIOS work. Here, we use a semi-analytical algorithm to merge Rrs (or, equivalently LwN) data from different sources to estimate [Ch1]. The model also allows for the retrieval of other quantities such as the combined absorption of colored detrital particulate and dissolved organic matter at 443 nm, a(sub cdm)(443) and the particulate backscattering, b(sub bp)(443).

Siegel, David A.↗
NASA NTRS2010

Single sensor processing to obtain high resolution color component signals

A method for generating color video signals representative of color images of a scene includes the following steps: focusing light from the scene on an electronic image sensor via a filter having a tri-color filter pattern; producing, from outputs of the sensor, first and second relatively low resolution luminance signals; producing, from outputs of the sensor, a relatively high resolution luminance signal; producing, from a ratio of the relatively high resolution luminance signal to the first relatively low resolution luminance signal, a high band luminance component signal; producing, from outputs of the sensor, relatively low resolution color component signals; and combining each of the relatively low resolution color component signals with the high band luminance component signal to obtain relatively high resolution color component signals.

Glenn, William E.↗
NASA NTRS2012

Single Lens Dual-Aperture 3D Imaging System: Color Modeling

In an effort to miniaturize a 3D imaging system, we created two viewpoints in a single objective lens camera. This was accomplished by placing a pair of Complementary Multi-band Bandpass Filters (CMBFs) in the aperture area. Two key characteristics about the CMBFs are that the passbands are staggered so only one viewpoint is opened at a time when a light band matched to that passband is illuminated, and the passbands are positioned throughout the visible spectrum, so each viewpoint can render color by taking RGB spectral images. Each viewpoint takes a different spectral image from the other viewpoint hence yielding a different color image relative to the other. This color mismatch in the two viewpoints could lead to color rivalry, where the human vision system fails to resolve two different colors. The difference will be closer if the number of passbands in a CMBF increases. (However, the number of passbands is constrained by cost and fabrication technique.) In this paper, simulation predicting the color mismatch is reported.

bipartite filter↗
NASA NTRS2018

Hawkeye Ocean Color Instrument – Performance Summary

Hawkeye is an ocean color instrument that is part of the SeaHawk satellite developed for SOCON, the Sustained Ocean Color Observations using Nanosatellites program funded by the Gordon and Betty Moore Foundation and managed by the University of North Carolina – Wilmington (UNC-W). HawkEye has spectral characteristics similar to SeaWiFS, but with 8 times finer resolution and a smaller field of view more appropriate for lakes, rivers, and near-shore terrestrial environments. With a volume of only 10 X 10 X 10 cm (a CubeSat 1U), it can produce 8 bands of image data in a single pass, each with 1800 x 6000 pixels, with a resolution of 120 meters per pixel. This paper will present a short summary of instrument design, the spacecraft interface, and “lessons learned” during this effort. Scientists considering using linear arrays in a pushbroom mode for remote sensing will find this useful. Much of the discussion will center on optical performance, such as flat field calibration, polarization effects, stray light, out-of-band response, and exposure linearity. Images from field tests will be shown.The Hawkeye instrument is an ocean color measuring instrument designed to fly on the SeaHawk satellite developed for SOCON, the Sustained Ocean Color Observations using Nanosatellites program funded by the Gordon and Betty Moore Foundation and managed by the University of North Carolina – Wilmington (UNC-W). The Hawkeye instrument measures ocean color in 8 spectral bands, similar to SeaWiFS, except Band 7, which is shifted to a slightly lower wavelength to avoid the oxygen absorption feature that a wider band overlapped on SeaWiFS. The instrument is approximately 1/3rd the volume of the entire satellite, which is a 3U Cubesat manufactured by Clydespace in Glasgow, Scotland. The purpose of this instrument is to ascertain the quality of ocean color data possible with such a small, inexpensive instrument and bus. The nominal orbit is 540 km, and the nominal pixel geometric instantaneous field of view (GIFOV) 120 meters on a side. Each band will produce an image 1800 x 6000 pixels in size, for a total field of view of 216 X 720 km.2) DESIGN CONCEPTThe Hawkeye instrument uses linear arrays in pushbroom mode to collect data over a two dimensional area. The instrument has 4 linear CCD arrays, the Onsemi KLI-4104, to collect the 8 bands of data. Figure 1 illustrates the optical design for two bands, sharing a single array.

Hawkeye↗
NASA NTRS2019

Using Graph Coloring to Compute Total Derivatives More Efficiently in OpenMDAO

When they are applicable, gradient based optimization algorithms are the most efficient way to solve design optimization problems. Although gradient based methods are generally efficient, they can be made significantly more so through the usage of analytic techniques to compute the necessary total derivatives. The traditional forward (direct) and reverse (adjoint) analytic techniques have computational costs that scale linearly with the number of design variables and the number of constraints, respectively. In this work, we present an application of a graph coloring algorithm to the analytic techniques for computing total derivative Jacobians in order to achieve much better computational scaling than the pure analytic methods can provide alone. A detailed theoretical explanation of how coloring algorithms interact with analytic derivative methods is presented that illustrates specific types of sparsity patterns that must be present in total derivative Jacobians in order for this coloring technique to be effective. The new technique has been implemented as a feature in the OpenMDAO framework and the implementation is demonstrated on two example problems. The performance on the example problems up to 50% reduction in compute cost for optimizations with bi-directional coloring compared to traditional constraint aggregation. Additionally, the results show how coloring technique alleviates some of the numerical difficulties that constraint aggregation can cause, leading to the ability to solve larger problems. It is expected that the new method will have wide applicability to multidisciplinary optimization problems, and that its availability in OpenMDAO will offer significant computational savings for users without the need for them to implement the coloring algorithm themselves.

Trajectory↗