Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLLIDER MODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Higher-order-mode absorbers for energy recovery linac cryomodules at Brookhaven National Laboratory

Several future accelerator projects at Brookhaven for the Relativistic Heavy Ion Collider (RHIC) are based on energy recovery linacs (ERLs) with high-charge high-current electron beams. Their stable operation mandates effective higher-order-mode (HOM) damping. The development of HOM dampers for these projects is pursued actively at this laboratory. Strong HOM damping was experimentally demonstrated both at room and at superconducting (SC) temperatures in a prototype research and development (R&D) five-cell niobium superconducting rf (SRF) cavity with ferrite dampers. Two room-temperature mock-up five-cell copper cavities were used to study various damper configurations with emphasis on capacitive antenna dampers. An innovative type of ferrite damper over a ceramic break for an R&D SRF electron gun also was developed. For future SRF linacs longer cryomodules comprised of multiple superconducting cavities with reasonably short intercavity transitions are planned. In such a configuration, the dampers, located closer to the cavities, will be at cryogenic temperatures; this will impose additional constraints and complications. This paper presents the results of simulations and measurements of several damper configurations.

43 PARTICLE ACCELERATORS↗

Direct verification of warped hierarchy-and-flavor models

We consider direct experimental verification of warped models, based on the Randall-Sundrum (RS) scenario, that explain gauge and flavor hierarchies, assuming that the gauge fields and fermions of the standard model (SM) propagate in the 5D bulk. Most studies have focused on the bosonic Kaluza-Klein (KK) signatures and indicate that discovering gauge KK modes is likely possible, yet challenging, while graviton KK modes are unlikely to be accessible at the CERN LHC, even with a luminosity upgrade. We show that direct evidence for bulk SM fermions, i.e. their KK modes, is likely also beyond the reach of a luminosity-upgraded LHC. Thus, neither the spin-2 KK graviton, the most distinct RS signal, nor the KK SM fermions, direct evidence for bulk flavor, seem to be within the reach of the LHC. We then consider hadron colliders with {radical}(s)=21, 28, and 60 TeV. We find that discovering the first KK modes of SM fermions and the graviton typically requires the Next Hadron Collider (NHC) with {radical}(s){approx_equal}60 TeV and O(1) ab{sup -1} of integrated luminosity. If the LHC yields hints of these warped models, establishing that nature is described by them, or their 4D conformal field theory duals, requires an NHC-class machine in the post-LHC experimental program.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resonance Excitation of Longitudinal High Order Modes in Project X Linac

Results of simulation of power loss due to excitation of longitudinal high order modes (HOMs) in the accelerating superconducting RF system of CW linac of Project X are presented. Beam structures corresponding to the various modes of Project X operation are considered: CW regime for 3 GeV physics program; pulsed mode for neutrino experiments; and pulsed regime, when Project X linac operates as a driver for Neutrino Factory/Muon Collider. Power loss and associated heat load due to resonance excitation of longitudinal HOMs are shown to be small in all modes of operation. Conclusion is made that HOM couplers can be removed from the design of superconducting RF cavities of Project X linac.

43 PARTICLE ACCELERATORS↗

Measurement of the H Λ 3 lifetime in Au+Au collisions at the BNL Relativistic Heavy Ion Collider [Measurement of the H Λ 3 lifetime in Au+Au collisions at the Relativistic Heavy Ion Collider]

Here, an improved measurement of the 3 Λ H lifetime is presented. In this paper, the mesonic decay modes 3 Λ H → 3 He + π – and 3 Λ H → d + p + π – are used to reconstruct the 3 Λ H from Au+Au collision data collected by the STAR collaboration at Relativistic Heavy Ion Collider (RHIC). A minimum χ2 estimation is used to determine the lifetime of τ = 142 +24 –21 (stat.) ± 29 (syst.) ps. This lifetime is about 50% shorter than the lifetime τ = 263 ± 2 ps of a free Λ, indicating strong hyperon-nucleon interaction in the hypernucleus system. The branching ratios of the mesonic decay channels are also determined to satisfy B.R. ( 3 He+π – )/( B.R. ( 3 He+π – ) + B.R. (d+p+π – ) ) = 0.32 ± 0.05 (stat.) ± 0.08 (syst.). Our ratio result favors the assignment J( 3 Λ H) = 1/2 over J( 3 Λ H) = 3/2. These measurements will help to constrain models of hyperon-baryon interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Direct Top-Quark Width Measurement from Lepton + Jets Events at CDF II

We present a measurement of the top-quark width using t{bar t} events produced in p{bar p} collisions at Fermilab's Tevatron collider and collected by the CDF II detector. In the mode where the top quark decays to a W boson and a bottom quark, we select events in which one W decays leptonically and the other hadronically (lepton + jets channel) . From a data sample corresponding to 4.3 fb{sup -1} of integrated luminosity, we identify 756 candidate events. The top-quark mass and the mass of W boson that decays hadronically are reconstructed for each event and compared with templates of different top-quark widths ({Lambda}{sub t}) and deviations from nominal jet energy scale ({Delta}{sub JES}) to perform a simultaneous fit for both parameters, where {Delta}{sub JES} is used for the in situ calibration of the jet energy scale. By applying a Feldman-Cousins approach, we establish an upper limit at 95% confidence level (CL) of {Lambda}{sub t} < 7.6 GeV and a two-sided 68% CL interval of 0.3 GeV < {Lambda}{sub t} < 4.4 GeV for a top-quark mass of 172.5 GeV/c{sup 2}, which are consistant with the standard model prediction. This is the first direct measurement of {Lambda}{sub t} to set a lower limit with 68% CL.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Neutral Minimal Supersymmetric Standard Model Higgs Bosons Decaying to Tau Pairs Produced in Association with b Quarks in pp Collisions at {radical}(s)=1.96 TeV

We report results from a search for neutral Higgs bosons produced in association with b quarks using data recorded by the D0 experiment at the Fermilab Tevatron Collider and corresponding to an integrated luminosity of 7.3 fb{sup -1}. This production mode can be enhanced in several extensions of the standard model (SM) such as in its minimal supersymmetric extension (MSSM) at high tan{beta}. We search for Higgs bosons decaying to tau pairs with one tau decaying to a muon and neutrinos and the other to hadrons. The data are found to be consistent with SM expectations, and we set upper limits on the cross section times branching ratio in the Higgs boson mass range from 90 to 320 GeV/c{sup 2}. We interpret our result in the MSSM parameter space, excluding tan{beta} values down to 25 for Higgs boson masses below 170 GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Higgs boson decay into a pair of leptons.

The decay of a Higgs boson into a pair of W bosons h {yields} W{sup +}W{sup -}, is a dominant mode for Higgs boson masses above 135 GeV. At hadron colliders, searches for this decay focus on channels in which both W bosons decay leptonically, h {yields} W{sup +}W{sup -} {yields} l{sup +}l{sup -} plus missing energy. We show that semileptonic decays of heavy flavors are an important background to this signal. Lepton isolation provides too little suppression of heavy flavor contributions, and an additional 4 to 8 orders-of-magnitude suppression must come from physics cuts. An increase of the cut on the the minimum transverse momentum of non-leading leptons in multilepton events is one effective way to achieve the needed suppression, without appreciable loss of the Higgs boson signal.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for the baryon number and lepton number violating decays τ − → Λ π − and τ − → Λ ¯ π − at Belle II

We present a search for the baryon number B and lepton number L violating decays τ − → Λ π − and τ − → Λ ¯ π − produced from the e + e − → τ + τ − process, using a 364 fb − 1 data sample collected by the Belle II experiment at the SuperKEKB collider. No evidence of signal is found in either decay mode, which have | Δ ( B − L ) | equal to 2 and 0, respectively. Upper limits at 90% credibility level on the branching fractions of τ − → Λ π − and τ − → Λ ¯ π − are determined to be 4.7 × 10 − 8 and 4.3 × 10 − 8 , respectively. Published by the American Physical Society 2024

Adachi, I. (ORCID:0000000322870173)↗

Measurement of CP asymmetries and branching fractions in a time-dependent Dalitz analysis of B{sup 0}{yields}({rho}{pi}){sup 0} and a constraint on the quark mixing angle {phi}{sub 2}

We present the results of a time-dependent Dalitz plot analysis of B{sup 0}{yields}{pi}{sup +}{pi}{sup -}{pi}{sup 0} decays based on a 414 fb{sup -1} data sample that contains 449x10{sup 6}BB pairs. The data were collected on the {upsilon}(4S) resonance with the Belle detector at the KEKB asymmetric energy e{sup +}e{sup -} collider. Combining our analysis with information on charged B decay modes, we perform a full Dalitz and isospin analysis and obtain a constraint on the quark mixing angle {phi}{sub 2}, 68 deg. <{phi}{sub 2}<95 deg. at the 68.3% confidence level for the {phi}{sub 2} solution consistent with the standard model. A large standard-model-disfavored region also remains. The branching fractions for the decay processes B{sup 0}{yields}{rho}{sup {+-}}(770){pi}{sup {+-}} and B{sup 0}{yields}{rho}{sup 0}(770){pi}{sup 0} are measured to be (22.6{+-}1.1[stat]{+-}4.4[syst])x10{sup -6} and (3.0{+-}0.5[stat]{+-}0.7[syst])x10{sup -6}, respectively. These are the first branching fraction measurements of the process B{sup 0}{yields}{rho}(770){pi} with the lowest resonance {rho}(770) explicitly separated from the radial excitations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for B + → ℓ + ν ℓ γ decays with hadronic tagging using the full Belle data sample

We search for the decay B + → ℓ + νℓγ with ℓ + = e + or μ + using the full Belle data set of 772 × 10 6 BB¯ pairs, collected at the Υ(4S) resonance with the Belle detector at the KEKB asymmetric-energy e + e – collider. We reconstruct one B meson in a hadronic decay mode and search for the B + → ℓ + νℓγ decay in the remainder of the event. Here, we observe no significant signal within the phase space of E$^{sig}_{γ}$ > 1 GeV and obtain upper limits of B(B + → e + ν e γ) < 6.1 × 10 –6 , B(B + → μ + ν μ γ) < 3.4 × 10 –6 , and B(B + → ℓ + ν ℓ γ) < 3.5 × 10 –6 at 90% credibility level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a massive invisible particle X 0 in B + → e + X 0 and B + → μ + X 0 decays

We present a search for a non-Standard-Model invisible particle X 0 in the mass range 0.1-1.8GeV/c 2 in B + →e + X 0 and B + →μ+X 0 decays. The results are obtained from a 711 fb -1 data sample that corresponds to 772×10 6 BB pairs, collected at the Υ(4S) resonance with the Belle detector at the KEKB e + e - collider. One B meson is fully reconstructed in a hadronic mode to determine the momentum of the lepton of the signal decay in the rest frame of the recoiling partner B meson. We find no evidence of a signal and set upper limits on the order of 10 -6 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a massive invisible particle X{sup 0} in B{sup +} → e{sup +}X{sup 0} and B{sup +} → μ{sup +}X{sup 0} decays

We present a search for a non-Standard-Model invisible particle X{sup 0} in the mass range 0.1–1.8 GeV/c{sup 2} in B{sup +} → e{sup +}X{sup 0} and B{sup +} → μ{sup +}X{sup 0} decays. The results are obtained from a 711 fb{sup −1} data sample which corresponds to 772 × 10{sup 6}BB̄ pairs, collected at the Υ(4S) resonance with the Belle detector at the KEKB e{sup +}e{sup −} collider. One B meson is fully reconstructed in a hadronic mode to determine the momentum of the lepton of the signal decay in the rest frame of the recoiling partner B meson. We find no evidence of a signal and set upper limits on the order of 10{sup −6}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Light long-lived particles at colliders

Searches for long-lived particles (LLPs) are a rapidly expanding frontier at the LHC and other collider experiments. Still, many gaps remain in the current search program, in particular for LLPs with masses at the GeV or sub-GeV scale and with very large decay lengths. In this talk, I will illustrate two different approaches to filling this gap by discussing two models of light LLPs and their associated collider signals. First, I will show that the dominant decay mode of vectorlike leptons can be a very long-lived pseudoscalar and a tau lepton and argue that the muon chambers of CMS or ATLAS are ideal places to search for this final state. Second, I will illustrate the excellent sensitivity of Belle II to light LLPs with meter-scale decay lengths using the example of displaced vertex signals from strongly interacting dark sectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for B+ to D+K0 and B+ to D+K*0 Decays

We report a search for the rate decays B{sup +}{yields}D{sup +}K{sup 0} and B{sup +}{yields}D{sup +}K{sup asterisk}{sup 0} in an event sample of approximately 465 million BB pairs collected with the BABAR detector at the PEP-II asymmetric energy e{sup +}e{sup -} collider at SLAC. We find no significant evidence for either mode and we set 90% probability upper limits on the branching fractions of {ss} (B{sup +}{yields}D{sup +}K{sup 0}) <2.9 X 10{sup -6} and {ss}(B{sup +} {yields} D{sup +}K{sup asterisk}{sup 0}) <3.0 X 10{sup -6} .

43 PARTICLE ACCELERATORS↗

The VEPP-2000 electron-positron collider: First experiments

In 2007, at the Institute of Nuclear Physics (Novosibirsk), the construction of the VEPP-2000 electron-positron collider was completed. The first electron beam was injected into the accelerator structure with turned-off solenoids of the final focus. This mode was used to tune all subsystems of the facility and to train the vacuum chamber using synchrotron radiation at electron currents of up to 150 mA. The VEPP-2000 structure with small beta functions and partially turned-on solenoids was used for the first testing of the 'round beams' scheme at an energy of 508 MeV. Beam-beam effects were studied in strong-weak and strong-strong modes. Measurements of the beam sizes in both cases showed a dependence corresponding to model predictions for round colliding beams. Using a modernized SND (spherical neutral detector), the first energy calibration of the VEPP-2000 collider was performed by measuring the excitation curve of the phimeson resonance; the phi-meson mass is known with high accuracy from previous experiments at VEEP-2M. In October 2009, a KMD-3 (cryogenic magnetic detector) was installed at the VEPP-2000 facility, and the physics program with both the SND and LMD-3 particle detectors was started in the energy range of 1-1.9 GeV. This first experimental season was completed in summer 2010 with precision energy calibration by resonant depolarization.

43 PARTICLE ACCELERATORS↗

Radial transmission line analysis of multi-layer structures

The analysis of multi-layer beam tubes is a standard problem and involves axially propagating waves. This treatment is ill suited to a short multi-layer structure such as the present example of a ferrite covered ceramic break in the beam tube at the ERL photo-cathode electron gun. This paper demonstrates that such structure can better be treated by radial wave propagation. The theoretical method is presented and numerical results are compared with measured network analyser data and Microwave Studio generated simulations. The results confirm the concept of radial transmission lines as a valid analytical method. An Energy Recovery Linac (ERL) is being constructed at this laboratory for the purpose of research towards an envisioned Electron Ion Collider. One of the pertinent topics is damping of Higher Order Modes (HOM). In this ERL, the damping is provided by ferrite absorbers in the beam tube. A modified version thereof, a ceramic break surrounded by ferrite, is planed for the superconducting electron gun. The damper here is located at room temperature just outside of the gun. If used in a cavity chain, the ceramic break is in the vacuum tube at helium temperature whereas the ferrite is moved into the cryostat insulating vacuum allowing higher temperatures. The general properties of the ferrite HOM dampers have been published but are more detailed in this paper.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Multiple bunch HOM evaluation for ERL cavities

In this paper we investigate the effect of the bunch pattern in a linac on the Higher Order Mode (HOM) power generation. The future ERL-based electron–ion collider eRHIC at BNL is used as an illustrative example. This ERL has multiple high current Superconducting Radiofrequency (SRF) 5-cell cavities. The HOM power generated when a single bunch traverses the cavity is estimated by the corresponding loss factor. Multiple re-circulations through the Energy Recovery Linac (ERL) create a specific bunch pattern. In this case the loss factor can be different than the single bunch loss factor. HOM power can vary dramatically when the ERL bunch pattern changes. The HOM power generation can be surveyed in the time and frequency domains. We estimate the average HOM power in a 5-cell cavity with different ERL bunch patterns.

43 PARTICLE ACCELERATORS↗

Correction of the baseline fluctuations in the GEM-based ALICE TPC

To operate the ALICE Time Projection Chamber in continuous mode during the Run 3 and Run 4 data-taking periods of the Large Hadron Collider, the multi-wire proportional chamber-based readout was replaced with gas-electron multipliers. As expected, the detector performance is affected by the so-called common-mode effect, which leads to significant baseline fluctuations. A detailed study of the pulse shape with the new readout has revealed that it is also affected by ion tails. Since reconstruction and data compression are performed fully online, these effects must be corrected at the hardware level in the FPGA-based common readout units. The characteristics of the common-mode effect and of the ion tail, as well as the algorithms developed for their online correction, are described in this paper. The common-mode dependencies are studied using machine-learning techniques. Toy Monte Carlo simulations are performed to illustrate the importance of online corrections and to investigate the performance of the developed algorithms.

47 OTHER INSTRUMENTATION↗