Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CO2 Sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Flux to the atmosphere of CH4 and CO2 from wetland ponds on the Hudson Bay lowlands (HBLs)

Ponds on peatlands of the Hudson Bay lowlands (HBLs) are complex ecosystems in which the fluxes to the atmosphere of CH4 and CO2 were controlled by interacting physical and biological factors. This resulted in strong diel variations of both dissolved gas concentrations and gas fluxes to the atmosphere, necessitating frequent sampling on a 24-hour schedule to enable accurate estimates of daily fluxes. Ponds at three sites on the HBL were constant net sources of CH4 and CO2 to the atmosphere at mean rates of 110-180 mg CH4 m(exp -2)/d and 3700-11,000 mg CO2 m(exp -2)/d. Rates peaked in August and September. For CH4 the pond fluxes were 3-30 times higher than adjacent vegetated surfaces. For CO2 the net pond fluxes were similar in magnitude to the vegetated fluxes but the direction of the flux was opposite, toward atmosphere. Even though ponds cover only 8-12% of the HBL area, they accounted for 30% of its total CH4 flux to the atmosphere. There is some circumstantial evidence that the ponds are being formed by decomposition of the underlying peat and that this decomposition is being stimulated by the activity of N2 fixing cyanobacteria that grow in mats at the peat-water interface. The fact that the gas fluxes from the ponds were so different from the surrounding vegetated surfaces means that any change in the ratio of pond to vegetated area, as may occur in response to climate change, would affect the total HBL fluxes.

Hamilton, J. David↗
NASA NTRS2019

A Suite of High-Resolution Atmospheric Carbon Dioxide Simulations in Support of the OCO-3 Snapshot Area Mapping (SAM) Mode Observation: PSU-WRF, CSU-OLAM and NASA GEOS

Cities and power plants are responsible more than 70% of GHG emissions. The emissions from the subnational localized sources need to be accurately quantified and properly managed in order to achieve the Paris Climate Agreement goals. The accurate estimation of these emission is also crucial for assessing the capacity of natural sinks to uptake the carbon released into the atmosphere that ultimately defines our emission allowance for the 1.5 or 2.0 degree temperature goals. New data collected by the Orbiting Carbon Observatory 3 (OCO-3) Snapshot Area Mapping (SAM) observations should provide a tremendous new opportunity for us to study CO2 emissions from targeted large localized sources, such as cities, power plants and beyond. Since 2018 (prior to the OCO-3 launch), we have studied the observational strategies for the SAM mode observation in order to collect the useful data for estimating CO2 emissions from target sources. To maximize the benefit of the SAM mode observation data for quantifying CO2 emission, it is important to define how to observe the localized sources depending on the local environmental and emission specificities. We employ a suite of state-of-the-art CO2 modeling systems, such as PSU's WRF-CO2, CSU's OLAM and NASA's GEOS models. All of these CO2 modeling systems are prescribedwith the high-resolution fuel CO2 emission estimates from the ODIAC data product to achieve realistic urban CO2 variations. We focus on cities with established ground-based observation networks, such as Los Angeles, Indianapolis, and Paris. We have examined the urban emission signal detectability in response to the influence of local background conditions that can observed by the SAM and biospheric contributions that will be a new challenge for urban emission inverse estimation. Based on the results of our simulation experiments, we plan to propose city-specific observation strategies. Upon the availability of the OCO-3 data, we will attempt to estimate city emissions using inverse models. We also developed synthetic OCO-3 data using NASA's GEOS5 model, which should be useful to assess the utility of the OCO-3 data in combination with data collected by carbon satellites in other orbits, such as NASA's OCO-2 and Japanese GOSAT-1/2. The synthetic data also provide an opportunity to study the errors due to clouds and aerosols, which have been not fully studied in the past.

Oda, Tomohiro↗
NASA NTRS2016

B33C-0612: Evaluation of Simulated Biospheric Carbon Dioxide Fluxes and Atmospheric Concentrations Using Global in Situ Observations

Atmospheric mixing ratios of carbon dioxide (CO2) are largely controlled by anthropogenic emission sources and biospheric sources/sinks. Global biospheric fluxes of CO2 are controlled by complex processes facilitating the exchange of carbon between terrestrial ecosystems and the atmosphere. These processes which play a key role in these terrestrial ecosystem-atmosphere carbon exchanges are currently not fully understood, resulting in large uncertainties in the quantification of biospheric CO2 fluxes. Current models with these inherent deficiencies have difficulties simulating the global carbon cycle with high accuracy. We are developing a new modeling platform, GEOS-Chem-CASA by integrating the year-specific NASA-CASA (National Aeronautics and Space Administration - Carnegie Ames Stanford Approach) biosphere model with the GEOS-Chem (Goddard Earth Observation System-Chemistry) chemical transport model to improve the simulation of atmosphere-terrestrial ecosystem carbon exchange. We use NASA-CASA to explicitly represent the exchange of CO2 between terrestrial ecosystem and atmosphere by replacing the baseline GEOS-Chem land net CO2 flux and forest biomass burning CO2 emissions. We will present the estimation and evaluation of these "bottom-up" land CO2 fluxes, simulated atmospheric mixing ratios, and forest disturbance changes over the last decade. In addition, we will present our initial comparison of atmospheric column-mean dry air mole fraction of CO2 predicted by the model and those retrieved from NASA's OCO-2 (Orbiting Carbon Observatory-2) satellite instrument and model-predicted surface CO2 mixing ratios with global in situ observations. This evaluation is the first step necessary for our future work planned to constrain the estimates of biospheric carbon fluxes through "top-down" inverse modeling, which will improve our understanding of the processes controlling atmosphere-terrestrial ecosystem greenhouse gas exchanges, especially over regions which lack in situ observations.

in situ observations↗
NASA NTRS2012

Large Scale Variability of Mid-Tropospheric Carbon Dioxide as Observed by the Atmospheric Infrared Sounder (AIRS) on the NASA EOS Aqua Platform

The Atmospheric Infrared Sounder (AIRS) is a hyperspectral infrared instrument on the EOS Aqua Spacecraft, launched on May 4, 2002. AIRS has 2378 infrared channels ranging from 3.7 microns to 15.4 microns and a 13.5 km footprint. AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), produces temperature profiles with 1K/km accuracy, water vapor profiles (20%/2km), infrared cloud height and fraction, and trace gas amounts for CO2, CO, SO2, O3 and CH4 in the mid to upper troposphere. AIRS wide swath(cedilla) +/-49.5 deg , enables daily global daily coverage for over 95% of the Earth's surface. AIRS data are used for weather forecasting, validating climate model distribution and processes, and observing long-range transport of greenhouse gases. In this study, we examine the large scale and regional horizontal variability in the AIRS Mid-tropospheric Carbon Dioxide product as a function of season and associate the observed variability with known atmospheric transport processes, and sources and sinks of CO2.

carbon dioxide↗
NASA NTRS1984

Global carbon - nitrogen - phosphorus cycle interactions: A key to solving the atmospheric CO2 balance problem?

If all biotic sinks of atmospheric CO2 reported were added a value of about 0.4 Gt C/yr would be found. For each category, a very high (non-conservative) estimate was used. This still does not provide a sufficient basis for achieving a balance between the sources and sinks of atmospheric CO2. The bulk of the discrepancy lies in a combination of errors in the major terms, the greatest being in a combination of errors in the major terms, the greatest being in the net biotic release and ocean uptake segments, but smaller errors or biases may exist in calculations of the rate of atmospheric CO2 increase and total fossil fuel use as well. The reason why biotic sinks are not capable of balancing the CO2 increase via nutrient-matching in the short-term is apparent from a comparison of the stoichiometry of the sources and sinks. The burning of fossil fuels and forest biomass releases much more CO2-carbon than is sequestered as organic carbon.

Peterson, B. J.↗
NASA NTRS1972

Mariner 6 and 7 ultraviolet spectrometer experiment - Analysis of the O I 1304- and 1356-A emissions.

Analysis of the O I 1304- and 1356-A data from Mariner 6 and 7, and estimation of the atomic oxygen concentration of the Martian atmosphere. Derived values of the parameters describing the sources of excitation differ considerably from previous estimates. A detailed statistical treatment is used in the analysis. At an exospheric temperature of 350 K the atomic oxygen concentration at 135 km is estimated to be between 0.5 and 1%. The likely source of the 1304-A intensity is resonance scattering of solar 1304-A photons. For the 1356-A emission, the likely source is photodissociation of CO2. There is an indication of a diurnal variation of the Martian upper atmosphere.

Strickland, D. J.↗
NASA NTRS1985

What we do not know about cometary ices - A review of the incomplete evidence

Only two features seem rather well established about the cometary nucleus: it is an icy conglomerate that contains a large amount of volatile ices, and its major constituent seems to be water ice. The evidence on all the minor constituents is incomplete and fragmentary and there are still major difficulties in establishing a complete list of the parent molecules from the numerous radicals, ions, and atoms observed in the coma. In particular, the case of the forbidden lines of oxygen is discussed here in detail; new arguments are shown to contradict the need for CO2 as a major source of O(1D).

Delsemme, A. H.↗
NASA NTRS1987

Boundary conditions for the paleoenvironment: Chemical and physical processes in the pre-solar nebula

Detailed study of the first interstellar hydrocarbon ring, cyclopropenylidene (C3H2), is continuing. The singly deuterated isotope of this molecule, C3HD, was observed in several cold interstellar clouds. The results of a large survey for C3H2 in galactic sources of various types will soon be completed. It appears that cyclopropenylidene is present in virtually all interstellar clouds of at least moderate density. In order to make the first determinations of the CO2/CO abundance ratio in interstellar sources, observations of protonated CO2 were pursued. The spectrum from 18.5 to 22 GHz for several interstellar clouds is being systematically measured. Particular attention is being given to the cold, dark clouds TMC-1 and L124N, which may be formation sites for solar mass stars. The phenomena of maser emission from molecules of methanol is being studied in certain interstellar clouds. A comparison of 1 millimeter continuum emission from dust with the column density of carbon monoxide as determined from the rare C(18)O isotope for 4 molecular clouds in the Galaxy is nearing completion. Papers published during the period of this report are listed.

Irvine, William M.↗
NASA NTRS1990

Soil bed reactor work of the Environmental Research Lab. of the University of Arizona in support of the research and development of Biosphere 2

Research at the Environmental Research Lab in support of Biosphere 2 was both basic and applied in nature. One aspect of the applied research involved the use of biological reactors for the scrubbing of trace atmospheric organic contaminants. The research involved a quantitative study of the efficiency of operation of Soil Bed Reactors (SBR) and the optimal operating conditions for contaminant removal. The basic configuration of a SBR is that air is moved through a living soil that supports a population of plants. Upon exposure to the soil, contaminants are either passively adsorbed onto the surface of soil particles, chemically transformed in the soil to usable compounds that are taken up by the plants or microbes as a metabolic energy source and converted to CO2 and water.

Frye, Robert↗
NASA NTRS1992

Effect of atmospheric extinction on laser rangefinder performance at 1.54 and 0.6 microns

Extinction of laser rangefinder (LRF) pulses by the atmosphere depends on the wavelength, weather conditions, and aerosol concentration along the optical path. In the IR, extinction is due to absorption by molecular constituents and scattering and absorption by aerosols. The total atmospheric extinction alpha(lambda) is the sum of the molecular and aerosol contributions, alpha(sub m)(lambda)and Alpha(sub a)(lambda). We present simple expressions for alpha(sub m)(lambda) and alpha(sub a)(lambda) for two LRF sources: Er:glass and CO2 which operate at 1.54 and 10.6 microns, respectively. The expressions are based on accepted models of atmospheric aerosols and molecular extinction and give an estimate of alpha(lambda) as a function of standard meteorological parameters, assuming horizontal beam propagation. Signal-to-noise ratios of LRF returns, measured from a reference target under different weather conditions are compared to predictions based on the estimate of alpha(lambda).

Hutt, D. L.↗
NASA NTRS1992

On the possibility of chemosynthetic ecosystems in subsurface habitats on Mars

Recent discoveries of nonphotosynthetic microbial ecosystems on earth have prompted the present reexamination of the prospects for microbial life on Mars, where well-protected subsurface niches associated with hydrothermal activity could have furnished a refuge after surface conditions became inhospitable. It is noted that extensive geological features attest to widespread ground ice-volcanism interactions. Attention is given to the possibility of anaerobic systems employing CO2 as the primary source of carbon, and liquid water furnished by melted subsurface permafrost. Gases from deep volcanic activity could effect reduction, thereby establishing a chemolithoautotrophic basis for a methanogenic or acetogenic and sulfur-based ecology microbial community.

Boston, Penelope J.↗
NASA NTRS1993

Utilization of on-site resources for regenerative life support systems at Lunar and Martian outposts

Lunar and martian materials can be processed and used at planetary outposts to reduce the need (and thus the cost) of transportng supplies from Earth. A variety of uses for indigenous, on-site materials have been suggested, including uses as rocket propellants, construction materials, and life support materials. Utilization of on-site resources will supplement Regenerative Life Support Systems (RLSS) that will be needed to regenerate air, water, wastes, and to produce food (e.g., plants) for human consumption during long-duration space missions. Natural materials on the Moon and/or Mars may be used for a variety of RLSS needs including (1) soils or solid-support substrate for plant growth, (2) sources for extraction of essential plant-growth nutrients, (3) sources of O2, H2, CO2, and water, (4) substrates for microbial populations in the degradation of wastes, and (5) shielding materials surrounding outpost structures to protect humans, plants, and microorganisms from radiation. In addition to the regolith, the martian atmosphere will provide additional resources at a Mars outpost, including water, CO2 and other atmospheric gases.

Ming, Douglas W.↗
NASA NTRS1994

Record of fluid-rock interactions on Mars from the meteorite ALH84001

Allan Hills (ALH) 84001 is the most recently recognized member of a suite of meteorites--the SNCs--that almost certainly originated on Mars. Several factors distinguish ALH84001 from the other SNC meteorites. Preliminary studies suggest that it may be older than other martian meteorites. Moreover, it contains abundant, zoned domains of calcium-iron-magnesium carbonate that are indigenous to the sample and thus may hold important clues regarding near-surface processes on Mars and the evolution of the martian atmosphere. We report here analyses of the carbon and oxygen stable-isotope compositions of the carbonates that place constraints on their formation conditions. Our results imply the presence of at least two chemically distinct carbonates--one Ca,Fe-rich, the other Mg-rich--that are enriched in 13C relative to terrestrial carbonates (delta 13C approximately +41/1000), consistent with martian atmospheric CO2 as the carbon source. The oxygen isotope compositions of the carbonates indicate that they precipitated from a low-temperature fluid in the martian crust. Combined with textural and bulk geochemical considerations, the isotope data suggest that carbonate deposition took place in an open-system environment in which the ambient temperature fluctuated.

Carbonates/analysis↗
NASA NTRS2009

Synthetic and Biomass Alternate Fueling in Aviation

While transportation fueling can accommodate a broad range of alternate fuels, aviation fueling needs are specific, such as the fuel not freezing at altitude or become too viscous to flow properly or of low bulk energy density that shortens range. The fuel must also be compatible with legacy aircraft, some of which are more than 50 years old. Worldwide, the aviation industry alone uses some 85-95 billion gallons of hydrocarbon-based fossil fuel each year, which is about 10% of the transportation industry. US civil aviation alone consumes nearly 14 billion gallons. The enormity of the problem becomes overwhelming, and the aviation industry is taking alternate fueling issues very seriously. Biofuels (algae, cyanobacteria, halophytes, weeds that use wastelands, wastewater and seatwater), when properly sourced, have the capacity to be drop-in fuel replacements for petroleum fuels. As such, biojet from such sources solves the aviation CO2 emissions issue without the downsides of 'conventional' biofuels, such as competing with food and fresh water resources. Of the many current fundamental problems, the major biofuel problem is cost. Both research and development and creative engineering are required to reduce these biofuels costs. Research is also ongoing in several 'improvement' areas including refining/processing and biologics with greater disease resistance, greater bio-oil productivity, reduced water/nutrient requirements, etc. The authors' current research is aimed at aiding industry efforts in several areas. They are considering different modeling approaches, growth media and refining approaches, different biologic feedstocks, methods of sequestering carbon in the processes, fuel certification for aviation use and, overall, ensuring that biofuels are feasible from all aspects - operability, capacity, carbon cycle and financial. The authors are also providing common discussion grounds/opportunities for the various parties, disciplines and concerned organization to share both issues and potential ways for moving forward, and overall, trying to educate those concerned about the innate limitations of 'conventional' biofuels and the solutions provided by non-traditional feedstocks that used waste lands/water or saline/salt water have an immense capacity potential.

Hendricks, R. C.↗
NASA NTRS2010

Aviation Fueling: A Cleaner, Greener Approach

Projected growth of aviation depends on fueling where specific needs must be met. Safety is paramount, and along with political, social, environmental and legacy transport systems requirements, alternate aviation fueling becomes an opportunity of enormous proportions. Biofuels sourced from halophytes, algae, cyanobacteria, and weeds using wastelands, waste water, and seawater have the capacity to be drop-in fuel replacements for petroleum fuels. Biojet fuels from such sources solves the aviation CO2 emissions issue and do not compete with food or freshwater needs. They are not detrimental to the social or environmental fabric and use the existing fuels infrastructure. Cost and sustainable supply remains the major impediments to alternate fuels. Halophytes are the near-term solution to biomass/biofuels capacity at reasonable costs; they simply involve more farming, at usual farming costs. Biofuels represent a win-win approach, proffering as they do at least the ones we are studying massive capacity, climate neutral-to-some sequestration, and ultimately, reasonable costs.

Hendricks, Robert C.↗
NASA NTRS2006

NASA Tech Briefs, July 2006

Topics covered include: Airport Remote Tower Sensor Systems; Implantable Wireless MEMS Sensors for Medical Uses; Embedded Sensors for Measuring Surface Regression; Coordinating an Autonomous Earth-Observing Sensorweb; Range-Measuring Video Sensors; Stability Enhancement of Polymeric Sensing Films Using Fillers; Sensors for Using Times of Flight to Measure Flow Velocities; Receiver Would Control Phasing of a Phased-Array Antenna; Modern Design of Resonant Edge-Slot Array Antennas; Carbon-Nanotube Schottky Diodes; Simplified Optics and Controls for Laser Communications; Coherent Detection of High-Rate Optical PPM Signals; Multichannel Phase and Power Detector; Using Satellite Data in Weather Forecasting: I; Using Dissimilarity Metrics to Identify Interesting Designs; X-Windows PVT Widget Class; Shuttle Data Center File-Processing Tool in Java; Statistical Evaluation of Utilization of the ISS; Nanotube Dispersions Made With Charged Surfactant; Aerogels for Thermal Insulation of Thermoelectric Devices; Low-Density, Creep-Resistant Single-Crystal Superalloys; Excitations for Rapidly Estimating Flight-Control Parameters; Estimation of Stability and Control Derivatives of an F-15; Tool for Coupling a Torque Wrench to a Round Cable Connector; Ultrasonically Actuated Tools for Abrading Rock Surfaces; Active Struts With Variable Spring Stiffness and Damping; Multiaxis, Lightweight, Computer-Controlled Exercise System; Dehydrating and Sterilizing Wastes Using Supercritical CO2; Alpha-Voltaic Sources Using Liquid Ga as Conversion Medium; Ice-Borehole Probe; Alpha-Voltaic Sources Using Diamond as Conversion Medium; White-Light Whispering-Gallery-Mode Optical Resonators; Controlling Attitude of a Solar-Sail Spacecraft Using Vanes; and Wire-Mesh-Based Sorber for Removing Contaminants from Air.

Source record↗
NASA NTRS2012

Geostationary Carbon Process Mapper (GCPM)

Geostationary Carbon Process Mapper (GCPM) is an earth science mission to measure key atmospheric trace gases related to climate change and human activity.Understanding of sources and sinks of CO2 is currently limited by frequency of observations and uncertainty in vertical transport. GCPM improves this situation by making simultaneous high resolution measurements of CO2, CH4, CF, and CO in near-IR, many times per day. GCPM is able to investigate processes with time scales of minutes to hours. CO2, CH4, CF, Co selected because their combination provides information needed to disentangle natural and anthropogenic sources/sinks. Quasi-continuous monitoring effectively eliminates atmospheric transport uncertainties from source/sink inversion modeling. will have one instrument (GeoFTS), hosted on a commercial communications satellite, planned for two years operation. GCPM will affordably advance the understanding of observed cycle variability improving future climate projections.

Carbon Process↗
NASA NTRS2016

An Efficient Single Frequency Ho:YLF Laser for IPDA Lidar Applications

A highly efficient, versatile, single frequency 2-micron pulsed laser can be used in a pulsed Differential Absorption Lidar (DIAL) / Integrated Path Differential Absorption (IPDA) instrument to make precise, high-resolution measurements to investigate sources and sinks of CO2. For a direct detection IPDA lidar, the desired 2 m Ho:YLF laser should generate 30-40 mJ pulses at the repetition rate of 100 to 200 Hz, with short pulse length (<100 ns) and better than 2% wall plug efficiency. A Tm fiber laser in-band pumped Ho:YLF laser has been developed to meet this technical challenge. This Ho:YLF laser is designed in a four mirror ring resonator with bow tie configuration, which helps to obtain high beam quality. It is end-pumped by a 40 W linearly polarized Tm fiber laser at 1.94μm. The resonator length is 1.10 meters with output coupler reflectivity at 45%. The laser crystal size is 3 x 3 x 60 mm (w, h, l) with a doping concentration of 0.5% Holmium. The laser beam and pump beam are mode-matched in the active medium. Thus, the pump and laser beams have the same confocal parameters. Mode-matching is also helpful for operating the laser in a single transverse mode. The laser beam waist is slightly less than 0.5 mm at the center of the laser crystal. Based on quasi-four level modeling, pump absorption and saturation depend on laser intensity. Laser amplification and saturation also depend on the pump intensity in the crystal. The laser is injection seeded to obtain the single frequency required by an IPDA lidar measurement. The seed beam is entered into the resonator through an output coupler. The laser is mounted on a water cooled optical bench for stable and reliable operation. The size of the optical bench is 22.16 x 9.20 x 1.25 inches. It is stiffened so that the laser can be operated in any orientation of the optical bench. This packaged Ho:YLF laser is designed for either mobile trailer or airborne platform operation. The engineering prototype Ho:YLF laser has been fully characterized to demonstrate laser performance. Figure 1 shows the laser output power as a function of pump power at different pulse repetition rates from 100 Hz to 333 Hz. The threshold of the laser is less than 14 W. The slope efficiencies are 28%, 40%, 41% and 43% for pulse repetition rates of 100, 200, 250 and 333 Hz, respectively. Maximum power increases with the pulse repetition rate. Output power of 4.2 W, 6 W, 6.7 W, and 7.7 W is achieved for pulse repetition rates of 100, 200, 250 and 333Hz, respectively. This represents the optical conversion efficiency of 16.7%, 22.4%, 23.7%, and 26.5% at these various pulse repletion rates. It is the most efficient and compact Ho:YLF laser demonstrated in the high pulse energy (>20mJ) and moderate pulse repetition rate (100's Hz) operation range. As shown in Figure 1, the maximum pulse energy at 100 Hz is 42 mJ. This is limited due to optical damage. The laser stability is characterized and found to be very stable. A relative pulse energy standard deviation of 2% was measured. The beam quality of the Ho:YLF was measured by a Spiricon infrared laser beam camera. Figure 2 shows the beam profile image of the laser. Both the X-profile of the beam (horizontal direction) and the Y-profile of the beam (vertical direction) are well fitted by a Gaussian profile. The qualitative beam quality measurement shows excellent beam quality in both axis. The M-square value for the laser beam is measured at 1.06 and 1.09 for the x and y axis respectively.-

Yu, J.↗