Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CDI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Combustor diffuser interaction program

Advances in gas turbine engine performance are achieved by using compressor systems with high stage loading and low part count, which result in high exit Mach numbers. The diffuser and combustor systems in such engines should be optimized to reduce system pressure loss and to maximize the engine thrust-to-weight ratio and minimize length. The state-of-the-art combustor-diffuser systems do not meet these requirements. Detailed understanding of the combustor-diffuser flow field interaction is required for designing advanced gas turbine engines. An experimental study of the combustor-diffuser interaction (CDI) is being conducted to obtain data for the evaluation and improvement of analytical models applicable to a wide variety of diffuser designs. The CDI program consists of four technical phases: Literature Search; Baseline Configuration; Parametric Configurations; and Performance Configurations. Phase 2 of the program is in progress.

Srinivasan, Ram↗

Polymerization on the rocks: beta-amino acids and arginine

We have studied the accumulation of long oligomers of beta-amino acids on the surface of minerals using the 'polymerization on the rocks' protocol. We find that long oligopeptides of beta-glutamic acid which cannot be formed in homogeneous aqueous solution are accumulated efficiently on the surface of hydroxylapatite using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDAC) as condensing agent. The EDAC-induced oligomerization of aspartic acid on hydroxylapatite proceeds even more efficiently. Hydroxylapatite can also facilitate the ligation of the tripeptide (glu)3. The 'polymerization on the rocks' scenario is not restricted to negatively-charged amino acids. Oligoarginines are accumulated on the surface of illite using carbonyldiimidizole (CDI) as condensing agent. We find that FeS2 catalyzes the CDI-induced oligomerization of arginine, although it does not adsorb oligoarginines. These results are relevant to the formation of polypeptides on the primitive earth.

NASA Discipline Exobiology↗

Atomic Resolution Coherent Diffractive Imaging and Ultrafast Science

A major scientific challenge is determining the 3-D atomic structure of small nanostructures, including single molecules. Coherent diffractive imaging (CDI) is a promising approach. Recent progress has demonstrated coherent diffraction patterns can be recorded from individual nanostructures and phased to reconstruct their structure. However, overcoming the dose limit imposed by radiation damage is a major obstacle toward the full potential of CDI. One approach is to use ultrafast x-ray or electron pulses. In electron diffraction, amplitudes recorded in a diffraction pattern are unperturbed by lens aberrations, defocus, and other microscope resolution-limiting factors. Sub-A signals are available beyond the information limit of direct imaging. Significant contrast improvement is obtained compared to high-resolution electron micrographs. progress has also been made in developing time-resolved electron diffraction and imaging for the study of ultrafast dynamic processes in materials. This talk will cover these crosscutting issues and the convergence of electron and x-ray diffraction techniques toward structure determination of single molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Capacitive de-ionization electrode

An electrode "cell" for use in a capacitive deionization (CDI) reactor consists of the electrode support structure, a non-reactive conductive material, the electrode accompaniment or substrate and a flow through screen/separator. These "layers" are repeated and the electrodes are sealed together with gaskets between two end plates to create stacked sets of alternating anode and cathode electrodes in the CDI reactor.

42 ENGINEERING↗

Compressible foam electrode

A foam electrode comprising surface treatment by the steps of: 1) impregnating soft compressible polymeric foams with a conductive coating via sequential infiltration synthesis and 2) functionalizing the chemically altered voids with an ultrathin redox coating to enhance capacitive deionization (CDI). The redox coating will allow treated foam to absorb ions under the application of a bias, and mechanical compression/decompression. The CDI apparatus uses the void volume of the foam in the uncompressed state to flow liquids through it while the compressed state is used to enhance desalination by limiting the diffusion pathways for the ions to find an adsorption surface.

Young, Matthias John↗

Hierarchical Ordered Mesoporous Carbon from Phloroglucinol-Glyoxal and its Application in Capacitive Deionization of Brackish Water

Templated carbon materials have recently received tremendous attention due to energy storage and separations applications. Hierarchical structures are ideal for increased mass-transport throughout the carbon material. A new ordered mesoporous carbon material has been developed using glyoxal which exhibits a hierarchical structure with pore sizes up to 200 nm. The hierarchical structure arises from the cross linking reagent and not from the standard spinodal decomposition of a secondary solvent. The carbon material was studied for potential application as a capacitive deionization (CDI) electrode for brackish water. Results indicate that the hierarchical structure provides a pathway for faster adsorption kinetics when compared to standard resorcinol-formaldehyde CDI electrodes.

36 MATERIALS SCIENCE↗

A review of transport models in charged porous electrodes

There is increased interest in many different processes based upon interactions between a charged solid surface and a liquid electrolyte. Energy storage in capacitive porous materials, ionic membranes, capacitive deionization (CDI) for water desalination, capacitive energy generation, removal of heavy ions from wastewater streams, and geophysical applications are some examples of these processes. Process development is driven by the production of porous materials with increasing surface area. Understanding of the physical phenomena occurring at the charged solid-electrolyte interface will significantly improve the design and development of more effective applied processes. The goal of this work is to critically review the current knowledge in the field. The focus is on concepts behind different models. We start by briefly presenting the classical electrical double layer (EDL) models in flat surfaces. Then, we discuss models for porous materials containing macro-, meso-, and micro-pores. Some of the current models for systems comprising two different pore sizes are also included. Finally, we discuss the concepts behind the most common models used for ionic transport and Faradaic processes in porous media. The latter models are used for simulation of electrosorption processes in porous media.

42 ENGINEERING↗

One- and Two-Equation Models to Simulate Ion Transport in Charged Porous Electrodes

Energy storage in porous capacitor materials, capacitive deionization (CDI) for water desalination, capacitive energy generation, geophysical applications, and removal of heavy ions from wastewater streams are some examples of processes where understanding of ionic transport processes in charged porous media is very important. In this work, one- and two-equation models are derived to simulate ionic transport processes in heterogeneous porous media comprising two different pore sizes. It is based on a theory for capacitive charging by ideally polarizable porous electrodes without Faradaic reactions or specific adsorption of ions. A two-step volume averaging technique is used to derive the averaged transport equations for multi-ionic systems without any further assumptions, such as thin electrical double layers or Donnan equilibrium. A comparison between both models is presented. The effective transport parameters for isotropic porous media are calculated by solving the corresponding closure problems. An approximate analytical procedure is proposed to solve the closure problems. Numerical and theoretical calculations show that the approximate analytical procedure yields adequate solutions. Lastly, a theoretical analysis shows that the value of interphase pseudo-transport coefficients determines which model to use.

25 ENERGY STORAGE↗

Intercalation of stable organic radicals into layered inorganic host matrices: Preparation and structural characterization of Cd{sub 1-x}PS{sub 3}(metaMPYNN){sub 2x}

The radical cation 2-(3-N-methylpyridinium)-4,4,5,5-tetramethyl-4, 5-dihydro-1H-imidazol-1-oxyl-3-N-oxide (abbreviated as m-MPYNN) is successfully intercalated into the layered host structure CdPS{sub 3}. The reaction proceeds via an ion exchange reaction from methanol solutions containing the radical iodide salt, leading to materials described by the compositional formula Cd{sub 1-x}PS{sub 3}(metaMPYNN){sub 2x}. Detailed characterization of the intercalates by chemical analysis, X-ray powder diffraction, EPR, and NMR spectroscopy indicate that the maximum uptake corresponds to x=0.20; attempts to produce higher intercalated materials result in the formation of a side product with inferred composition CdI{sub 4}(metaMPYNN){sub 2}. Magnetic susceptibility measurements indicate CURIE-like behavior for x=0.13, while at higher intercalation levels antiferromagnetic coupling is observed. The magnetic properties may be linked to the orientation of the radical ions relative to the host layers, which is also found to depend on x. While for the low-intercalated regime (x=0.13) both a transversal intercalation with the N-O director pointing towards the layers, and a longitudinal orientation, with the long axis of the molecule pointing towards the layers are found, at larger x-values only the longitudinal orientation is present. {sup 1}H NMR chemical shifts indicate that the orientation greatly influences the molecular spin density distributions. Modern single and double resonance solid state NMR techniques have been introduced successfully to study the structural modifications of the host lattice and the details of the intermolecular guest/host interactions. Specifically the internuclear distance correlations extracted from selectively measured {sup 1}H-{sup 31}P magnetic dipole-dipole couplings via {sup 31}P/{sup 1}H rotational echo double resonance (REDOR) experiments allow important conclusions regarding the orientation of the guest species relative to the inorganic layers. - Graphical abstract: The orientation of a nitroxide radical relative to the CdPS{sub 3} layers in the corresponding intercalation compound is inferred from x-ray diffraction and solid state NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallographic and magnetic properties of (Cu{sub 1-x}V{sub x})V{sub 2}S{sub 4} (x{approx}0.3) single crystals with the layered defect NiAs structure synthesized under high pressure

We report on the reproducible growth of (Cu{sub 1-x}V{sub x})V{sub 2}S{sub 4} single crystals of sizable dimensions ({approx}0.3 mm) and homogeneous composition (x{approx}0.3) by means of high-pressure synthesis. The refinement of single crystal X-ray diffraction data indicates that the crystal structure is of the monoclinic defect NiAs-type, which consists of a stacking of VS{sub 2} layers with CdI{sub 2}-type structure and chains of edge-sharing (Cu{sub 1-x}V{sub x})S{sub 6} octahedra. Layers and chains form a network of face-sharing octahedra with no Cu-V intra-chain ordering. A combined X-ray photoelectron spectroscopy and bond valence sum analysis indicates that the valence of the V and Cu ions are 3+ and 1+, respectively. Magnetic susceptibility measurements unveil the coexistence of a large Pauli-like and of a small Curie-like paramagnetic contributions, with no evidence of any long range order down to 2 K. This result suggests a picture of predominantly itinerant 3d V electrons with significant electron-electron correlations. - Graphical Abstract: Crystallographic structure of (Cu{sub 0.69}V{sub 0.31})V{sub 2}S{sub 4}. For clarity, the octahedral environment of (Cu{sub 0.69}V{sub 0.31}) site is not shown. Highlights: > Synthesis of new single-crystals in the Cu-V-S system using high pressure and high temperature. > Structural analysis revealed the single-crystals to be of the defect NiAs-type structure. > Bond valence sum analysis combined to X-ray photoemission spectroscopy revealed Cu{sup 1+} and a majority of V{sup 3+}. > Magnetic susceptibility has been measured. > Charge carriers are of two types, localized and itinerant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrosorption of organic acids from aqueous bio-oil and conversion into hydrogen via microbial electrolysis cells

Neutralization of the bio-oil pH has been shown to generate a neutralized bio-oil aqueous phase (NBOAP) that includes most of the acidic components and a neutralized bio-oil organic phase (NBOOP) that includes hydrophobic organics, such as phenols. NBOOP can be used for fuel production, while NBOAP can be fed to microbial electrolysis cells (MECs) for hydrogen production. After pH neutralization, some organic acidic components remain in NBOOP. This work is focused on capturing acidic compounds from NBOOP through water extraction and electrosorption, and demonstrating hydrogen production via MECs. Capacitive deionization (CDI) is proven effective in capturing ions from NBOOP-contacted water and NBOAP via electrosorption. Captured acidic compounds enable the MEC application to effectively produce renewable hydrogen. Chemical oxygen demand (COD) removal of 49.2%, 61.5%, and 60.8% for 2, 4, and 10 g/L-anode/day loading were observed, corresponding to a total COD degradation of 0.19 g/L, 0.79 g/L, and 1.3 g/L, respectively. A maximum hydrogen productivity of 4.3 L-H 2 /L-anode/day was obtained. Major compounds in the water phase such as fatty acids, sugar derivatives, furanic and phenolic compounds were converted to hydrogen with an efficiency of 80–90%. Lastly, this approach may lead the entire biomass pyrolysis process to be an overall carbon-neutral process.

09 BIOMASS FUELS↗

Structural Evolution of Layered Manganese Oxysulfides during Reversible Electrochemical Lithium Insertion and Copper Extrusion

The electrochemical lithiation and delithiation of the layered oxysulfide Sr 2 MnO 2 Cu 4-δ S 3 has been investigated by using a combination of in situ powder X-ray diffraction and ex situ neutron powder diffraction, X-ray absorption and 7 Li NMR spectroscopy, together with a range of electrochemical experiments. Sr 2 MnO 2 Cu 4-δ S 3 consists of [Sr 2 MnO 2 ] perovskite-type cationic layers alternating with highly defective antifluorite-type [Cu 4-δ S 3 ] (δ ≈ 0.5) anionic layers. It undergoes a combined displacement/intercalation (CDI) mechanism on reaction with Li, where the inserted Li replaces Cu, forming Li 4 S 3 slabs and Cu + is reduced and extruded as metallic particles. For the initial 2-3% of the first discharge process, the vacant sites in the sulfide layer are filled by Li; Cu extrusion then accompanies further insertion of Li. Mn 2.5+ is reduced to Mn 2+ during the first half of the discharge. The overall charging process involves the removal of Li and re-insertion of Cu into the sulfide layers with re-oxidation of Mn 2+ to Mn 2.5+ . However, due to the different diffusivities of Li and Cu, the processes operating on charge are quite different from those operating during the first discharge: charging to 2.75 V results in the removal of most of the Li, little reinsertion of Cu, and good capacity retention. A charge to 3.75 V is required to fully reinsert Cu, which results in significant changes to the sulfide sublattice during the following discharge and poor capacity retention. This detailed structure-property investigation will promote the design of new functional electrodes with improved device performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The New Semiconductor Cs 4 Cu 3 Bi 9 S 17

In this work, new quaternary chalcogenide Cs 4 Cu 3 Bi 9 S 17 has been synthesized by solid state reaction in a vacuum-sealed silica tube. Cs 4 Cu 3 Bi 9 S 17 adopts monoclinic space group P 2 1 / m , with the following dimensions: a = 20.006(4) Å, b = 4.0556(8) Å, c = 22.279(5) Å, and β = 96.921°. The crystal structure of Cs 4 Cu 3 Bi 9 S 17 features a unique three-dimensional framework consisting of interconnected Bi 2 Te 3 - and CdI 2 -type fragments forming three different-sized tunnels running parallel to the b -axis. The tunnels are filled with different numbers (1, 2, or 4) of Cs atoms. Cs 4 Cu 3 Bi 9 S 17 is stable in air at room temperature, and differential thermal analysis showed that it decomposes at elevated temperatures. Cs 4 Cu 3 Bi 9 S 17 is a semiconductor with a direct optical band gap of 0.9 eV, which is in agreement with density functional theory calculations. Electrical conductivity and Seebeck coefficient measurements show n-type semiconductor behavior. The electrical conductivity is 10 –4 S/cm at 300 K and increases to 0.9 S/cm at 773 K. Cs 4 Cu 3 Bi 9 S 17 possesses a very low thermal conductivity of 0.71 W m –1 K –1 at room temperature that decreases linearly with an increase in temperature to 0.46 W m –1 K –1 at 773 K. The low thermal conductivity shows the promise of Cs 4 Cu 3 Bi 9 S 17 as a new thermoelectric material with appropriate doping.

36 MATERIALS SCIENCE↗

Anisotropic Ferromagnetism in CrAu 3 Sb 6

The crystal structure and properties of CrAu 3 Sb 6 are presented, determined by measurements on single crystal and polycrystalline samples and first-principles calculations. The trigonal structure (space group P$\overline{3}$1m) comprises a CdI 2 -like sublattice of AuSb 2 with Cr occupying octahedral holes in a fully ordered triangular array. It can be viewed as a variation of the interesting and well-known families of partially intercalated transition metal dichalcogenides, but with stronger interactions along the stacking direction evidenced by short Cr–Au distances. The compound is metallic and ferromagnetic with a Curie temperature of 164 K. A strong anomalous contribution to the Hall effect is seen in the ferromagnetic state, and quantum oscillations are observed in magnetization at 2 K. Magnetization measurements show that the ordered moments of 1.5 μ B per Cr are oriented along the c-axis with relatively strong magnetocrystalline anisotropy. Electronic structure calculations confirm this uniaxial anisotropy and the important role of spin–orbit coupling in CrAu 3 Sb 6 and reveal strongly favored ferromagnetic ground state consistent with the measured Curie temperature. Through combined experiment and theory, this work provides a detailed picture of the basic properties and behaviors of this uniquely structured, Cr-based, anisotropic ferromagnet.

Crystal structure↗

Effects of Cd Diffusion and Doping in High-Performance Perovskite Solar Cells Using CdS as Electron Transport Layer

Perovskite solar cells with stabilized power conversion efficiency exceeding 15% have been achieved, using a methylammonium lead iodide (MAPbI 3 ) absorber and CdS as the electron transport layer. X-ray photoelectron spectroscopy reveals a small presence of Cd at the surface of most perovskite films fabricated on CdS. In this work, perovskite films were deliberately doped with Cd to understand the possible impacts of Cd diffusion into the perovskite absorber layer. Doping substantially increases the grain size of the perovskite films but also reduces device performance through the formation of an electrical barrier, as inferred by the S-shape of their $J–V$ curves. Time-resolved photoluminescence measurements of the doped films do not indicate substantial nonradiative recombination due to bulk defects, but a secondary phase is evident in these films, which experiments have revealed to be the organic–inorganic hybrid material methylammonium cadmium iodide, (CH 3 NH 3 ) 2 CdI 4 . It is further demonstrated that this compound can form via the reaction of CdS with methylammonium iodide and may form as a competing phase during deposition of the perovskite. Buildup of this insulating compound may act as an electrical barrier at perovskite interfaces, accounting for the drop in device performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bipolar Membrane Capacitive Deionization for pH-Assisted Ionic Separations

Selective ionic separations represent an increasingly important technical area for the strategic interests of the U.S. economy–for example, securing critical minerals and materials and circular economy aspirations that include recovering organic acids from processed biomass. This work disseminates bipolar membrane (BPM) capacitive deionization for selective ionic separations from multicomponent, ionic species mixtures. The selective separations are guided by the Pourbaix diagram and acid–base equilibria principles. BPM capacitive deionization was demonstrated to generate alkaline or acidic process streams depending upon the location of the BPM in the electrochemical cell. The role of system operating parameters, such as the cell voltage, residence time, and feed concentration on effluent stream pH was studied. It was observed that the pH adjustment in BPM-CDI/MCDI (MCDI, membrane capacitive deionization) was more sensitive to the cell voltage when compared to the process stream residence time and salt feed concentration. The BPM-MCDI gave over 6 times higher percentage of copper(II) removal when compared to sodium ion removal from brine mixtures. Lastly, BPM-MCDI demonstrated over 40% greater removal for copper ions from brine mixtures and fivefold higher removal for itaconic acid from brine mixtures when benchmarked against a traditional flow-by-MCDI setup.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-Scale Structure and Stress Release Mechanism in Core–Shell Nanoparticles

According to the article, core–shell nanoparticles find applications in catalysts, sensors, and theranostics. The full internal 3D atomic structure, however, cannot be resolved by current imaging and diffraction techniques. We analyzed the atomic positions and stress-release mechanism in a cubic Au–Pd core–shell nanoparticle in approximately 1000 times higher resolution than current experimental techniques using large-scale molecular dynamics simulation to overcome these limitations. The core–shell nanocube of 73 nm size was modeled similarly to solution synthesis by random epitaxial deposition of a 4 nm thick shell of Pd atoms onto a Au core of 65 nm side length using reliable interatomic potentials. The internal structure reveals specific deformations and stress relaxation mechanisms that are caused by the +4.8% lattice mismatch of gold relative to palladium and differential confinement of extended particle facets, edges, and corners by one, two, or three Au–Pd interfaces, respectively. The three-dimensional lattice strain causes long-range, arc-like bending of atomic rows along the faces and edges of the particle, especially near the Au–Pd interface, a bulging deformation of the Pd shell, and stacking faults in the Pd shell at the corners of the particle. The strain pattern and mechanism of stress release were further characterized by profiles of the atomic layer spacing in the principal crystallographic directions. Accordingly, strain in the Pd shell is several times larger in the extended facets than near the edges and corners of the nanoparticle, which likely affects adsorption, optical, and electrochemical properties. The findings are consistent with available experimental data, including 3D reconstructions of the same cubic nanoparticle by coherent diffractive imaging (CDI) and may be verified by more powerful experimental techniques in the future. The stress release mechanisms are representative for cubic core–shell nanoparticles with fcc structure and can be explored for different shapes by the same methods.

Chemistry↗

Carbamoylation as an Effective Tool in the Analysis of the Soman Nerve Agent Marker Pinacolyl Alcohol in Soil Matrices by EI-GC-MS and LC-HRMS

Pinacolyl alcohol (PA) is a Schedule 2 chemical commonly featured in most proficiency tests (PTs) administered by the Organisation for the Prohibition of Chemical Weapons (OPCW) due to its direct as well as forensic link to the nerve agent Soman. Therefore, its detection by Chemical Weapons Convention (CWC) inspection teams during on-site investigations is a strong indicator of the past or latent presence of Soman in the environment. Its small molecular weight (102), early elution time, and poor ionization profile make PA a challenging analyte to detect particularly at low concentrations (∼1–10 μg/g). In this work, 1,1′-carbonyldimidazole (CDI) has been used to effectively modify PA for the first time in two different soil matrices (Virginia type A soil and silt sediment) at two separate concentrations (1 and 10 μg/g) for its subsequent detection by EI-GC-MS and LC-HRMS methods. For the EI-GC-MS analysis, the PA carbamate derivative (PIC) exhibits improved chromatography relative to PA such as improved peak shape, increased molecular weight (196 for PIC and 102 for PA) and increased retention time (16.9 min for PIC and ∼4.1 min for PA). In addition, the derivatization also improves the detection of PA by LC-HRMS as the PIC product possesses protonation sites (i.e., imidazole ring) relative to none exhibited by PA. More importantly, the carbamoylation proceeds under mild conditions (55 °C, no base) and rapidly (3 h), characteristics that make it an appealing protocol for the analysis of PA during OPCW PTs or real case scenarios particularly in instances where it is present at low concentrations. It is anticipated that the protocol can be applied to the forensic analysis of this important Soman marker in various environmental matrices.

Chemistry↗